Effects of Substitution and Substrate Strain on the Structure and Properties of Orthorhombic Eu1-xYxMnO3 (0 ≤ x ≤ 0.5) Thin Films.

The effects on the structure and magnetic properties of Eu1-xYxMnO3 (0.0 ≤ x ≤ 0.5) thin films due to lattice strain were investigated and compared with those obtained in equivalent composition ceramics. The films were deposited by spin-coating chemical solution onto Pt\TiO2\SiO2\Si (100) standard substrates. X-ray diffraction and Raman spectroscopy measurements revealed that all films crystallize in orthorhombic structure with space group Pnma, observing an added contraction of the unit cell with increasing Y-substitution ou Eu, corresponding to a broadening of the Mn-O1-Mn angle and a gradual decrease in magnetic order response.

An Electrochemical Immunosensor Based on Carboxylated Graphene/SPCE for IgG-SARS-CoV-2 Nucleocapsid Determination.

The COVID-19 pandemic has emphasized the importance and urgent need for rapid and accurate diagnostic tests for detecting and screening this infection. Our proposal was to develop a biosensor based on an ELISA immunoassay for monitoring antibodies against SARS-CoV-2 in human serum samples. The nucleocapsid protein (N protein) from SARS-CoV-2 was employed as a specific receptor for the detection of SARS-CoV-2 nucleocapsid immunoglobulin G. N protein was immobilized on the surface of a screen-printed carbon electrode (SPCE) modified with carboxylated graphene (CG). The percentage of IgG-SARS-CoV-2 nucleocapsid present was quantified using a secondary antibody labeled with horseradish peroxidase (HRP) (anti-IgG-HRP) catalyzed using 3,3',5,5'-tetramethylbenzidine (TMB) mediator by chronoamperometry. A linear response was obtained in the range of 1:1000-1:200 v/v in phosphate buffer solution (PBS), and the detection limit calculated was 1:4947 v/v. The chronoamperometric method showed electrical signals directly proportional to antibody concentrations due to antigen-antibody (Ag-Ab) specific and stable binding reaction.

Effect of the Deposition Time on the Structural, 3D Vertical Growth, and Electrical Conductivity Properties of Electrodeposited Anatase-Rutile Nanostructured Thin Films.

TiO2 time-dependent electrodeposited thin films were synthesized using an electrophoretic apparatus. The XRD analysis revealed that the films could exhibit a crystalline structure composed of ~81% anatase and ~6% rutile after 10 s of deposition, with crystallite size of 15 nm. AFM 3D maps showed that the surfaces obtained between 2 and 10 s of deposition exhibit strong topographical irregularities with long-range and short-range correlations being observed in different surface regions, a trend also observed by the Minkowski functionals. The height-based ISO, as well as specific surface microtexture parameters, showed an overall decrease from 2 to 10 s of deposition, showing a subtle decrease in the vertical growth of the films. The surfaces were also mapped to have low spatial dominant frequencies, which is associated with the similar roughness profile of the films, despite the overall difference in vertical growth observed. The electrical conductivity measurements showed that despite the decrease in topographical roughness, the films acquired a thickness capable of making them increasingly insulating from 2 to 10 s of deposition. Thus, our results prove that the deposition time used during the electrophoretic experiment consistently affects the films' structure, morphology, and electrical conductivity.

Electrochemical immunosensor for detection of Plasmodium vivax lactate dehydrogenase.

BACKGROUND: Malaria is a disease that affects many tropical and subtropical countries, including Brazil. The use of tests for malaria detection is one of the fundamental strategies recommended by the World Health Organization for the control and eradication of the disease. The lack of diagnostic tests leads to an increase in transmission and non-reporting cases. OBJECTIVES: This work described an electrochemical immunosensor for detecting Plasmodium vivax lactate dehydrogenase antigen (Ag-PvLDH). METHODS: The device has developed by immobilising egg yolk IgY antibodies (Ab-PvLDH) on a gold electrode surface using cysteamine as linker. The immunosensor fabrication was followed by differential pulse voltammetry, and contact angle measurements were performed to characterise the modified gold electrode surface. FINDINGS: The results for Ag-PvLDH determination exhibit a linear response at 10-50 µg mL-1 concentration range, with a limit of detection of 455 ng mL-1. The excellent selectivity of the device was confirmed. MAIN CONCLUSIONS: The developed immunosensor showed a good performance, therefore, it can be considered an alternative test to detect malaria caused by P. vivax.

Electrochemical immunosensor for detection of Plasmodium vivax lactate dehydrogenase

BACKGROUND Malaria is a disease that affects many tropical and subtropical countries, including Brazil. The use of tests for malaria detection is one of the fundamental strategies recommended by the World Health Organization for the control and eradication of the disease. The lack of diagnostic tests leads to an increase in transmission and non-reporting cases. OBJECTIVES This work described an electrochemical immunosensor for detecting Plasmodium vivax lactate dehydrogenase antigen (Ag-PvLDH). METHODS The device has developed by immobilising egg yolk IgY antibodies (Ab-PvLDH) on a gold electrode surface using cysteamine as linker. The immunosensor fabrication was followed by differential pulse voltammetry, and contact angle measurements were performed to characterise the modified gold electrode surface. FINDINGS The results for Ag-PvLDH determination exhibit a linear response at 10-50 µg mL-1 concentration range, with a limit of detection of 455 ng mL-1. The excellent selectivity of the device was confirmed. MAIN CONCLUSIONS The developed immunosensor showed a good performance, therefore, it can be considered an alternative test to detect malaria caused by P. vivax.