Evaluation of physical and chemical characteristics of wastewater and sludge of Zahedan urban wastewater treatment plant for reuse.

Following the water shortage in the world, the use of wastewater as a sustainable resource has been considered in large volume. The study conducted to evaluate the physical and chemical characteristics of the wastewater and sludge of the Zahedan urban wastewater treatment plant showed that the wastewater and sludge treatment system of the treatment plant has high efficiency and effectiveness in removing the investigated parameters. The investigated parameters in the effluent included Chemical oxygen demand (COD), Biochemical oxygen demand (BOD), and Total suspended solids (TSS), turbidity, temperature, nitrate, nitrite, phosphate, pH, zinc, cobalt, lead and copper. Also, the investigated parameters in the sludge included Mixed liquor suspended solids (MLSS), Mixed liquor volatile suspended solids (MLVSS), pH, electrical conductivity and heavy metals. The results showed that the average concentration of metals in the treated effluent is Zn > Mn > Cu > Pb > Ni > Cr > Cd ،and Chemical oxygen demand and Biochemical oxygen demand in the effluent of this treatment plant are on average 171 and 44.4 mg/L, respectively, and its discharge in surface water is limited, but it can be applied for agriculture. Also, the purified sludge had the necessary standards and could be used as soil or household fertilizer and compost for agricultural land.

Epithelial cells/progenitor cells in developing human lower respiratory tract: Characterization and transplantation to rat model of pulmonary injury.

Introduction: For cell-based therapies of lung injury, several cell sources have been extensively studied. However, the potential of human fetal respiratory cells has not been systematically explored for this purpose. Here, we hypothesize that these cells could be one of the top sources and hence, we extensively updated the definition of their phenotype. Methods: Human fetal lower respiratory tissues from pseudoglandular and canalicular stages and their isolated epithelial cells were evaluated by immunostaining, electron microscopy, flow cytometry, organoid assay, and gene expression studies. The regenerative potential of the isolated cells has been evaluated in a rat model of bleomycin-induced pulmonary injury by tracheal instillation on days 0 and 14 after injury and harvest of the lungs on day 28. Results: We determined the relative and temporal, and spatial pattern of expression of markers of basal (KRT5, KRT14, TRP63), non-basal (AQP3 and pro-SFTPC), and early progenitor (NKX2.1, SOX2, SOX9) cells. Also, we showed the potential of respiratory-derived cells to contribute to in vitro formation of alveolar and airway-like structures in organoids. Cell therapy decreased fibrosis formation in rat lungs and improved the alveolar structures. It also upregulated the expression of IL-10 (up to 17.22 folds) and surfactant protein C (up to 2.71 folds) and downregulated the expression of TGF-ß (up to 5.89 folds) and AQP5 (up to 3.28 folds). Conclusion: We provide substantial evidence that human fetal respiratory tract cells can improve the regenerative process after lung injury. Also, our extensive characterization provides an updated phenotypic profile of these cells.

Decellularized Lung Extracellular Matrix Scaffold Promotes Human Embryonic Stem Cell Differentiation towards Alveolar Progenitors.

OBJECTIVE: Efficient production of functional and mature alveolar epithelial is a major challenge for developing any cell replacement therapy for lung degenerative diseases. The extracellular matrix (ECM) pro-vides a dynamic environment and mediates cellular responses during development and maintenance of tissue functions. The decellularized ECM (dECM) which retains its native-like structure and bio-chemical composition can provide the induction of embryonic stem cell (ESC) differentiation toward the tissue-specific lineages during in vitro culture. Therefore, the aim of this study was to evaluate the effect of sheep lung dECM-derived scaffold on differentiation and further maturation of ESC-derived lung progenitor cells. MATERIALS AND METHODS: This study was an experimental study. In the first step, a sheep lung was decellularized to achieve dECM scaffolds and hydrogels. Afterwards, the obtained dECM scaffold was evaluated for collagen and glycosaminoglycan contents, DNA quantification, and its ultrastructure. Next, the three experimental groups: i. Sheep lung dECM-derived scaffold, ii. Sheep lung dECM-derived hydrogel, and iii. Fibronectin-coated plates were compared in their abilities to induce further differentiation of human embryonic stem cells (hESCs)-derived definitive endoderm (DE) into lung progenitor cells. The comparison was evaluated by immuno-staining and real-time polymerase chain reaction (PCR) assessments. RESULTS: We found that the dECM-derived scaffold preserved its composition and native porous structures while lacking nuclei and intact cells. All experimental groups displayed lung progenitor cell differen-tiation as revealed by the RNA and protein expression of NKX2.1, P63 and CK5. DE cells differenti-ated on dECM-derived scaffold and dECMderived hydrogel showed significant upregulation of SOX9 gene expression, a marker of the distal airway epithelium. DE cells differentiated on the dECM-derived scaffold compared to the two other groups, showed enhanced expression of SFTPC (type 2 alveolar epithelial [AT2] cell marker), FOXJ1 (ciliated cell marker), and MUC5A (secretory cell marker) genes. CONCLUSION: Overall, our results suggest that dECM-derived scaffold improves the differentiation of DE cells towards lung alveolar progenitor cells in comparison with dECM-derived hydrogel and fibronectin-coated plates.

Tracking microplastics contamination in drinking water in Zahedan, Iran: From source to consumption taps.

Microplastics (MPs) that pollute drinking water are inherently toxic, act as an adsorbent of hazardous pollutants, and threaten human health. So, the fate of microplastics in drinking water from the source to consumption taps (CTs) was assessed in spring and winter in Zahedan city in Iran. Sampling was performed from 4 reservoirs (raw water), before and after two water treatment plants (WTPs), and 10 CTs. The reservoirs were sampled using a plankton net (pore size = 100 µm), and the remaining samples were taken using a sampling device (containing a stainless steel membrane as a filter with pore size = 5 µm). The combination of density separation techniques, digestion, observation, Micro-Raman and FTIR, and SEM analysis was performed to recognize MPs. The average number of MPs in raw water varied between 15.4 and 44.7 MP/m3 (winter) and 22-51.8 MP/m3 (spring). The results before and after the treatment plant showed that about 64 % and 75 % of particles were eliminated in WTP1 and WTP2, respectively. The average number of MPs in CTs was more than treatment water (CTa = 85-390 MP/m3 and CTb = 75-400 MP/m3), which is a probable confirmation of secondary contamination (abrasion from pipes, installations, and sealing materials). The dominant type of polymer detected in raw water, treated water, and consumption taps were PS. The estimated daily intake for children and adults was about 0.16-15 MP/kg/bw/year and 0.07-5.7 MP/kg/bw/year, respectively. The surface morphology of MPs showed that the particles were affected by continuous weathering, mechanical breakage, and oxidation. MPs threaten the environment and human health due to the adsorption and transport of hazardous pollution and their intrinsic toxicity, so a solution must be thought of to prevent the pollution of drinking water by MPs.

Dual effects of atorvastatin on angiogenesis pathways in the differentiation of mesenchymal stem cells.

Atorvastatin (ATO) can improve the transplantation efficacy of mesenchymal stem cells (MSCs) after acute myocardial infarction. The present study aimed at ATO effects on the angiogenesis-signaling pathways from MSCs' differentiation to tissue angiogenesis. MSCs were first prepared from BALB/c mouse bone marrow. MTT assay was then done for the biodegradability of MSCs with the extracellular matrix. After that, the differentiation of cells into the bone and fat tissues was confirmed by Alizarin and Oil Red O staining. The extracellular matrix was then combined with the cells to the implant. Animals were intraperitoneally treated with ATO (2 and 40 mg/kg, daily) three days before cell transplantation to one week after. Finally, the assays were carried out by electron microscopy, immunocytochemistry, ELISA, Western blot, and RT-qPCR techniques. A phase-contrast microscope confirmed the morphology of cells. The cell differentiation into bone and fat tissues was confirmed by Alizarin red staining and flow cytometry, and the cell proliferation was confirmed by MTT assay. Unlike ATO 40 mg/kg group, ATO 2 mg/kg was significantly increased the CD31, eNOS, podocalyxin, von Willibrand factor, and alpha-smooth muscle actin proteins levels compared to the control group in vitro experiment. The expression of CD31 and VEGF proteins, as angiogenesis markers, and Ki-67 protein, as a proliferation marker, was significantly higher in a low dose of ATO (2 mg/kg) than that of the control group in vivo experiment. Unlike ATO 40 mg/kg, the expression levels of ERK, AKT, NF-ҝB, Rho, STAT3, Ets-1, HIF-1α, and VEGF proteins and genes were significantly increased in ATO 2 mg/kg compared to the control. A low dose of ATO can be a beneficial tool in the function of MSCs and their differentiation to tissue angiogenesis.

Cross-linked acellular lung for application in tissue engineering: Effects on biocompatibility, mechanical properties and immunological responses.

The concept of providing tissue engineering scaffolds with natural physical properties and minimal immunogenicity has not been systematically approached for the lungs yet. Here, the rat acellular lung tissue (ALT) was cross-linked to provide either EDC/NHS cross-linked tissue (EDC/NHS-CLT) or tannic acid cross-linked tissue (TA-CLT). Young's modulus revealed that EDC/NHS-CLT had mechanical properties similar to the native lung and culture of lung mesenchymal cells showed a higher potential of cell proliferation on EDC/NHS-CLT versus TA-CLT and ALT. The in vitro immunogenicity tests showed a strong induction of T-cell proliferation by TA-CLT and an attenuated macrophage induction by TA-CLT. Processed rat lungs were implanted xenogenically into the mouse peritoneal cavity and the host-implant interactions showed that tannic acid is not released from TA-CLT in a physiologically effective dose. The profile of peritoneal fluid proinflammatory (TNFα, IL-1ß, IL-12p70 and IL-17) and anti-inflammatory (IL-10 and TGFß1) cytokines, and CD3+ T-lymphocytes and CD11b+ macrophages revealed that apart from induction of high levels of IL-17 during the first week and IL-10 during the second to third weeks after implantation by TA-CLT, other indicators of immune reactions to cross-linked tissues were not significantly different from ALT. Also, a high fibrotic reaction to TA-CLT was observed on the weeks 2-3, but alveolar structures were preserved in EDC/NHS-CLT. Our findings show that by controlled EDC/NHS cross-linking, an acellular lung scaffold could be provided with mechanical properties similar to native lung, which promotes mesenchymal lung cells proliferation and does not stimulate recipient's immune system more than a non-cross-linked tissue.

System dynamics approaches to assess the impacts of climate change on surface water quality and quantity: case study of Karoun River, Iran.

The aim of this research is to gain a better understanding of the effects of climate change with a comprehensive and dynamic perspective. Therefore, by using the System Dynamics (SD) approach to simulate the effects of climate change on the quality and quantity of the Karoun River and regarding the water supply and demand systems in the region and their feedback relations, a model was developed in Vensim. CGCM3 outputs under A2, B1, and A1B emission scenarios have been used to investigate the effects of climate change on both the quality/quantity of the water resources system. Also, to determine the effects of climate change on agricultural demand, the water requirement of selected crops for the next period (2015-2050) has been calculated via CROPWAT model. The results show that the maximum and minimum temperature and evaporation will increase. The results of the developed SD model show that if the current development process continues under all three climate change scenarios, the system will be able to meet the domestic, industrial, and environmental demand. However, the supply of agricultural demand will be deficient. Also, the average EC value in Ahvaz station under three emission scenarios has increased more than 21%, compared to the 15-year average. The average pH value did not change much. Then, several proposed management scenarios were evaluated to improve system performance. The results show that the scenario of optimal operation of upstream dams has the best performance. However, due to the unrealistic growing trend, despite applying this scenario, the development of the agricultural sector will fail down after a few years. Therefore, to reach a long-term solution to the problem of water shortage, the growth trend of this sector for the next period should be reviewed in light of the effects of climate change.

Designer Exosomes: A New Platform for Biotechnology Therapeutics.

Desirable features of exosomes have made them a suitable manipulative platform for biomedical applications, including targeted drug delivery, gene therapy, cancer diagnosis and therapy, development of vaccines, and tissue regeneration. Although natural exosomes have various potentials, their clinical application is associated with some inherent limitations. Recently, these limitations inspired various attempts to engineer exosomes and develop designer exosomes. Mostly, designer exosomes are being developed to overcome the natural limitations of exosomes for targeted delivery of drugs and functional molecules to wounds, neurons, and the cardiovascular system for healing of damage. In this review, we summarize the possible improvements of natural exosomes by means of two main approaches: parental cell-based or pre-isolation exosome engineering and direct or post-isolation exosome engineering. Parental cell-based engineering methods use genetic engineering for loading of therapeutic molecules into the lumen or displaying them on the surface of exosomes. On the other hand, the post-isolation exosome engineering approach uses several chemical and mechanical methods including click chemistry, cloaking, bio-conjugation, sonication, extrusion, and electroporation. This review focuses on the latest research, mostly aimed at the development of designer exosomes using parental cell-based engineering and their application in cancer treatment and regenerative medicine.

Antimicrobial peptides-loaded smart chitosan hydrogel: Release behavior and antibacterial potential against antibiotic resistant clinical isolates.

In this study, we synthesized thermo-responsive chitosan (TCTS) hydrogels, and loaded with different concentrations of antimicrobial peptide (AMP) (0, 4, 8 and 16 µg·ml-1) to fabricate an antibacterial wound dressing against resistant clinical isolates. Physico-chemical properties, release behavior, cytobiocompatibility and antibacterial activity of the AMP-TCTS hydrogels against standard strain and resistant Acinetobacter baumannii were fully determined in vitro. The TCTS-40% ß-glycerolphosphate hydrogels showed a gelation time of 15 min at 37 °C. 80% weight loss at day 35 with no changes in pH value was observed. AMP-TCTS hydrogels showed a burst release of AMP (around 40%) at day 1, and a controlled release up to day 7. A dramatic water uptake was observed at first 4 h, and then continued for 10 h in a steady manner. All the AMP-TCTS hydrogels showed excellent cytobiocompatibility for human fibroblasts. The TCTS showed no antibacterial activity against both standard strain and clinical isolates. All the AMP-TCTS hydrogels had strong antibacterial activity against standard strains, but only 16 µg·ml-1 showed antibacterial behavior against resistant A. baumannii. Our results strongly suggest the 16 µg·ml-1 AMP-TCTS hydrogel as an excellent antibacterial wound dressing against resistant A. baumannii, and now promises to proceed with pre-clinical investigations.

Comparison of Early Results and Complications between Multi-and Single-Port Sleeve Gastrectomy: A Randomized Clinical Study.

BACKGROUND: In recent years, laparoscopic sleeve gastrectomy (LSG) has become more acceptable for obese patients. Single-port sleeve gastrectomy (SPSG) is more popular since each abdominal incision carries the risk of bleeding, hernia, and internal organ injury as well as exponentially affecting cosmesis. This cross-sectional study aimed at comparing multi-port sleeve gastrectomy (MPSG) and SPSG in terms of their early results and complications. METHODS: Out of129 obese patients candidated for LSG, 102 patients were assigned to 2 groups of SPSG and MPSG. Complications and demographic data such as body mass index (BMI), age, gender, operation time, and hospital stay were measured. All surgeries were carried out between2013 and 2015 in Shiraz, Iran. Data analysis was performed using SPSS, version 16 for Windows (SPSS Inc., Chicago, IL). The continuous and categorical variables were compared using the Student t-test and the Chi-square test or the Fisher exact test, respectively. RESULTS: The patients' data from both groups were similar in terms of age, intraoperative and postoperative bleeding volume, and length of hospital stay. Mean BMI was 42.8±0.7 in the SPSG group and 45.3±1.2 in the MPSG group. Duration of surgery was significantly lower in the SPSG group (P<0.001). Only 1 patient from the SPSG group and 5 patients from the MPSG group had bleeding as an early complication. CONCLUSION: The differences in each complication between the groups were not statistically significant. SPSG seems to be safe and is the same as MPSG in terms of major postoperative complications. TRIAL REGISTRATION NUMBER: IRCT201512229936N12 The abstract was presented in the 4th International Congress of Minimally Invasive Surgery, Iran, as a poster and published in Iran J Med Sci Journal as a supplement (May 2015; Vol. 40, No. 3).

Differentiation potential of o bombay human-induced pluripotent stem cells and human embryonic stem cells into fetal erythroid-like cells.

OBJECTIVE: There is constant difficulty in obtaining adequate supplies of blood components, as well as disappointing performance of "universal" red blood cells. Advances in somatic cell reprogramming of human-induced pluripotent stem cells (hiPSCs) have provided a valuable alternative source to differentiate into any desired cell type as a therapeutic promise to cure many human disease. MATERIALS AND METHODS: In this experimental study, we examined the erythroid differentiation potential of normal Bombay hiPSCs (B-hiPSCs) and compared results to human embryonic stem cell (hESC) lines. Because of lacking ABO blood group expression in B-hiPSCs, it has been highlighted as a valuable source to produce any cell type in vitro. RESULTS: Similar to hESC lines, hemangioblasts derived from B-hiPSCs expressed approximately 9% KDR(+)CD31(+) and approximately 5% CD31(+)CD34(+). In semisolid media, iPSC and hESC-derived hemangioblast formed mixed type of hematopoietic colony. In mixed colonies, erythroid progenitors were capable to express CD71(+)GPA(+)HbF(+) and accompanied by endothelial cells differentiation. CONCLUSION: Finally, iPS and ES cells have been directly induced to erythropoiesis without hemangioblast formation that produced CD71(+)HbF(+) erythroid cells. Although we observed some variations in the efficiency of hematopoietic differentiation between iPSC and ES cells, the pattern of differentiation was similar among all three tested lines.

{4,4'-Dimeth-oxy-2,2'-[2,2-dimethyl-propane-1,3-diylbis(nitrilo-methanylyl-idene)]diphenolato}copper(II) monohydrate.

The asymmetric unit of the title compound, [Cu(C(21)H(24)N(2)O(4))]·H(2)O, comprises half of a Schiff base complex and a water mol-ecule. The Cu(II) atom, water mol-ecule and one C atom of the central propyl-ene segment are located on a twofold rotation axis. The geometry around the Cu(II) atom is distorted square-planar, supported by the N(2)O(2) donor atoms of the coordinating ligand. The dihedral angle between the symmetry-related benzene rings is 42.56 (19)°. In the crystal, O-H⋯O hydrogen bonds involving the water mol-ecule make an R(2) (1)(6) ring motif. Complex mol-ecules are linked into a chain along the c axis via C-H⋯O inter-actions.

{4,4'-Dimethyl-2,2'-[2,2-dimethyl-propane-1,3-diylbis(nitrilo-methanylyl-idene)]diphenolato}copper(II) monohydrate.

The asymmetric unit of the title compound, [Cu(C(21)H(24)N(2)O(2))]·H(2)O, comprises half of a Schiff base complex and half of a water mol-ecule. The whole compound is generated by crystallographic twofold rotation symmetry. The geometry around the Cu(II) atom, located on a twofold axis, is distorted square-planar, which is supported by the N(2)O(2) donor atoms of the coordinating Schiff base ligand. The dihedral angle between the symmetry-related benzene rings is 47.5 (4)°. In the crystal, the water mol-ecule that is hydrogen bonded to the coordinated O atoms links the mol-ecules via O-H⋯O inter-actions into chains parallel to [001]. The crystal structure is further stabilized by C-H⋯π inter-actions, and by π-π inter-actions involving inversion-related chelate rings [centroid-centroid distance = 3.480 (4) Å].

{4,4'-Dichloro-2,2'-[2,2-dimethyl-propane-1,3-diylbis(nitrilo-methanylyl-idene)]diphenolato}copper(II).

In the title Schiff base complex, [Cu(C(19)H(18)Cl(2)N(2)O(2))], the Cu(II) ion is coordinated in a distorted square-planar environment by two N atoms and two O atoms of the tetra-dentate ligand. The dihedral angle between the benzene rings is 36.86 (14)°. In the crystal, mol-ecules are linked into inversion dimers by pairs of weak C-H⋯O hydrogen bonds. In addition, π-π [centroid-centroid distance = 3.7279 (16) Å] and weak C-H⋯π inter-actions are observed.

2-((Z)-{3-[(Z)-(2-Hy-droxy-5-methyl-benzyl-idene)amino]-2,2-dimethyl-prop-yl}imino-meth-yl)-4-methyl-phenol.

In the title compound, C(21)H(26)N(2)O(2), the dihedral angle between the two benzene rings is 73.47 (16)°. Strong intra-molecular O-H⋯N hydrogen bonds generate S(6) ring motifs. The substituted benzene rings are twisted around the central quaternary C atom in opposite directions, making a vault geometry.