Does the molecular mobility and flexibility of the saccharide ring affect the glass-forming ability of naproxen in binary mixtures?

In this paper, we studied the impact of saccharides having a similar backbone but differing in the degree of freedom, local molecular mobility, flexibility of the ring and intermolecular interactions on the glass-forming ability (GFA) of naproxen (NAP) in binary mixtures. For this purpose, a series of methyl and acetyl derivatives of glucose (GLS) and anhydroglucose (anhGLS), as well as neat anhGLS have been used to produce homogeneous solid dispersions (SDs) of varying molar concentration of examined active pharmaceutical ingredient (API). Systematic measurements with the use of Differential Scanning Calorimetry (DSC) and Broadband Dielectric Spectroscopy (BDS) enabled us to determine the phase transitions, homogeneity and molecular mobility of the investigated binary mixtures as well as the impact of excipient on the crystallization tendency of NAP. It turned out that acetylated glucose (acGLS), one of the most mobile and flexible saccharides of all examined herein materials, is the best excipient enhancing the GFA of studied API. Although, it should be noted that upon storage at room temperature, we observed the recrystallization of NAP from binary mixtures. Interestingly, API always crystallized to the initial polymorphic form, as shown by X-ray diffraction (XRD) investigations. Finally, since additional measurements with the use of Fourier Transform Infrared (FTIR) Spectroscopy clearly indicated that there are no significant differences in the intermolecular interactions in the systems composed of NAP and all examined saccharides, one can postulate that the mobility and ring flexibility of the matrix have, , the most important impact on the crystallization tendency of NAP upon cooling. Consequently, it seems that in some cases, more mobile/flexible matrices can be a much better choice to enhance the glass-forming ability of studied pharmaceutical.

Controlled release of acidic drugs in compendial and physiological hydrogen carbonate buffer from polymer blend-coated oral solid dosage forms.

The objective of this study was to investigate the suitability of "Eudragit® RL/Eudragit® L55" (RL/L55) blend coatings for a pH-independent release of acidic drugs. A coating for ketoprofen and naproxen mini tablets was developed showing constant drug release rate under pharmacopeial two-stage test conditions for at least 300 min. To simulate drug release from the mini tablets coated with RL/L55 blends in the gastrointestinal (GI) tract, drug release profiles in Hanks buffer pH 6.8 were recorded and compared with drug release profiles in compendial media. RL/L55 blend coatings showed increased drug permeability in Hanks buffer pH 6.8 compared to phosphate buffer pH 6.8 due to its higher ion concentration. However, drug release rates of acidic drugs were lower in Hanks buffer pH 6.8 because of the lower buffer capacity resulting in reduced drug solubility. Further dissolution tests were performed in Hanks buffer using pH sequences simulating the physiological pH conditions in the GI tract. Drug release from mini tablets coated with an RL/L55 blend (8:1) was insensitive to pH changes of the medium within the pH range of 5.8-7.5. It was concluded that coatings of RL/L55 blends show a high potential for application in coated oral drug delivery systems with a special focus on pH-independent release of acidic drugs.

Impact of low molecular weight excipient octaacetylmaltose on the liquid crystalline ordering and molecular dynamics in the supercooled liquid and glassy state of itraconazole.

Different experimental and theoretical techniques were applied to investigate basic physical properties of very stable and homogeneous solid dispersions formed by itraconazole and octaacetylmaltose. Differential scanning calorimetry as well as semi-empirical calculations have indicated that liquid crystalline ordering in itraconazole was completely suppressed in the binary mixtures. Molecular dynamics studies with the use of broadband dielectric spectroscopy have shown that the width of the structural relaxation process becomes smaller and fragility drops in solid dispersions with respect to the pure itraconazole. Moreover, the dynamics of secondary relaxation processes was affected by acetylated maltose. As demonstrated, ß- and γ-secondary modes shift to higher and lower frequencies, respectively. On the other hand, aging experiments revealed that isostructural relaxation times in the glassy state become systematically longer with the addition of modified carbohydrate. This is a very important finding in the context of the current discussion on the factors affecting physical stability of easily crystallizing APIs. It seems that beside intermolecular interactions and local reorientation, the global mobility might control the crystallization of amorphous solid dispersions. Finally, we have demonstrated that itraconazole in binary mixtures dissolves faster and to greater extent with respect to the crystalline and amorphous form of this API.

Molecular dynamics of itraconazole at ambient and high pressure.

Comprehensive molecular dynamics studies of vitrified and cryogrounded itraconazole (Itr) were performed at ambient and elevated pressure. DSC measurements yielded besides melting and glass transition observed during heating and cooling of both samples two further endothermic events at around T = 363 K and T = 346 K. The nature of these transitions was investigated using X-ray diffraction, broadband dielectric spectroscopy and Density Functional Theory calculations. The X-ray measurements indicated that extra ordering in itraconazole is likely to occur. Based on calculations and theory derived by Letz et al. the transition observed at T = 363 K was discussed in the context of formation of the nematic mesophase. In fact, additional FTIR measurements revealed that order parameter variation in Itr shows a typical sequence of liquid crystal phases with axially symmetric orientational order; i.e. a nematic phase in the temperature range 361.7 K to 346.5 K and a smectic A phase below 346.5. Moreover, dielectric measurements demonstrated that except for the structural relaxation process, there is also slower mode above the glass transition temperature in both vitrified and cryogrounded samples. We considered the origin of this mode taking into account DFT calculations, rod like shape of itraconazole and distribution of its dipole moment vectors. For the dielectric data collected at elevated pressure, evolution of the steepness index versus pressure was determined. Finally, the pressure coefficient of the glass transition temperature was evaluated to be equal to 190 K GPa(-1).

Molecular dynamics of the supercooled pharmaceutical agent posaconazole studied via differential scanning calorimetry and dielectric and mechanical spectroscopies.

This paper presents comprehensive studies on the molecular dynamics of a pharmaceutically important substance, posaconazole. In order to characterize relaxation dynamics in the supercooled liquid and glassy states, dielectric and mechanical spectroscopies were applied. Dielectric data have indicated multiple relaxation processes that appear above and below the glass transition temperature Tg (τα=100 s) of posaconazole. From the curvature of the dielectric log10(τα) versus inverse of temperature dependence, we determine so-called "fragility", being a very popular parameter for classifying the structural dynamics of supercooled liquids and polymers. From the calculations, we get m=150, which means that is one of the most fragile glass-forming liquids. In this paper, the relaxation dynamics of supercooled posaconazole extracted from the dielectric response function was also confronted with shear-mechanical relaxation. Finally, we have also presented a direct comparison of the fragility and the number of dynamically correlated molecules Nc determined from dynamic calorimetry curves and dielectric and mechanical spectroscopies, showing a clear deviation in the picture of glass-transition dynamics generated by calorimetric and spectroscopic techniques.

Characterization of the behavior of alginate-based microcapsules in vitro and in vivo.

OBJECTIVES: Functional formulations providing protection of nutritional products against gastric juice or a capable of delivering them to distinct areas of the gastrointestinal tract are increasingly utilized by the food industry. However, the application of functional excipients that are established in pharmaceutical applications is limited in case of food products, as they are typically not classified as Generally Recognized As Safe (GRAS). MATERIALS: Accordingly, we investigated whether two alginate-based microcapsule preparations (capsule diameter 1 - 2 mm) either based on alginate and maize starch (MS-type) or alginate and casein (OCF27-type) and both created from ingredients classified as food supplements provide functional properties with respect to regional gastrointestinal targeting. METHODS: For this purpose the in vitro disintegration and swelling of the microcapsules was tested in various media. Furthermore, individual microcapsules, magnetically labelled with 100 - 200 microg black iron oxide, were ingested by healthy volunteers under fasting and fed conditions. Gastrointestinal transit as well as the gastrointestinal disintegration behavior were determined by using Magnetic Marker Monitoring. RESULTS: The results of in vitro and in vivo investigations show that both types of microcapsules are resistant to gastric juice for approximately 10 hrs under fasting and fed conditions. However, the disintegration characteristics of the two types of microcapsules within the intestines are different. CONCLUSION: Whilst the MS-type of capsules disintegrated predominantly within the small intestine shortly after gastric emptying, the OCF27-type of capsules underwent a rather slow disintegration predominantly in the colon.