Experimental trial of transvaginal cholecystectomy: an ex vivo analysis of the learning process for a novel single-port technique.

BACKGROUND: Interest in natural orifice transluminal endoscopic surgery (NOTES) has expanded, and the first experiences with patients using different techniques have been reported. However, no work has addressed the learning process or the limitations of the procedures. The relation between inexperience and complications became a major concern after the introduction of laparoscopic surgery. This study investigates the learning process for a new technique using specially designed instruments in an ex vivo model before clinical application. METHODS: Specially designed instruments and a single-port technique using the Tuebingen Trainer were used to evaluate instrument and surgeon performance (learning curve) in terms of time and errors. A total of 90 procedures performed by three surgeons were evaluated. Group and individual learning curves were plotted. RESULTS: All the surgeons showed a reduction in both mean cholecystectomy time (subject A: 27.2 vs 16.6 min; subject B: 21.4 vs 19.22 min; subject C: 21 vs 19.7 min) and mean errors (subject A: 2.8 vs 1.6; subject B: 3.5 vs 2.6; subject C: 3.5 vs 2). A plateau was reached after approximately 15 procedures. Group learning curve analysis showed a significant reduction in time between the first group (mean, 24.97 +/- 5.8 min) and last group (mean, 19.30 +/- 3.09 min; F[1,28] = 11.83; p = 0.001) for 15 procedures, as well as reduced technical errors in the fifth group, from 3.7 +/- 1.65 to 1.6 +/- 1.04 (F[1,28] = 8.90; p < 0.01), demonstrating a learning effect. The number of optic and access port position changes were recorded, setting a standard for normal instrument performance. CONCLUSION: This study shows that the tasks of cholecystectomy can be learned safely in a reasonable number of simulations with the new instruments. Although this is a new technique, prior laparoscopic surgery experience is helpful. The technique offers an advantage over those using flexible endoscopes.

Ablation of ventricular tachycardia.

Ablation is an important management tool for the treatment of ventricular arrhythmias. Even at experienced centers ventricular tachycardia ablation carries a minor but significant risk for potential complications, including vascular and thromboembolic complications, air embolism, volume overload and the precipitation of congestive heart failure, cardiac tamponade from catheter perforation or from steam pop with RF energy delivery, valve or subvalvular support structure disruption, conduction system disruption with development of heart block, coronary artery injury when ablating in the coronary cusps region or trying to gain access to the LV chamber, precipitation of cardiogenic shock from ablation of viable myocardium in patients with marginal reserve and failure to resuscitate or precipitation of cardiogenic shock from repeated VT induction, and with epicardial ablation the potential complications of epicardial access, coronary arteries and phrenic nerve damage. Recognition of these risks is paramount for their avoidance with careful pre-procedure planning and intraprocedural technique being essential to minimize the potential for complications.

Polymerization efficacy of simplified adhesive systems studied by NMR and MRI techniques.

OBJECTIVE: To ascertain the efficacy of polymerization of self-etching dental adhesives in different solvent evaporation conditions. MATERIAL AND METHODS: Four self-etching adhesive systems were studied. Two of them are classified as mild two-step self-etching adhesives (Clearfil SE Bond, Protect Bond) and the other two are strong one-step systems (Xeno III, ADP-Prompt-L-Pop). The influence of temperature and duration of the air-drying period on photo-polymerization was followed by: gravimetry, (1)H solid-state NMR spectroscopy and stray-field MRI. The evolution of proton magnetization with irradiation time was recorded and correlated with volumetric polymerization shrinkage and extent of reaction; evaporation and hardening effects were identified. RESULTS: Main variables determining water-solvent evaporation of the tested adhesives are: (1) water/HEMA relative concentration, (2) presence of photoinitiator compounds in the primer (SEB) and (3) presence of ethanol (XENO). SEB shows the highest extent of photo-polymerization of the tested adhesives. The lowest volumetric contraction was obtained for APLP and XENO and the attempt to remove the solvents did not increase the extent of polymerization significantly. CONCLUSIONS: Temperature increase following photo-polymerization reaction is dominant towards the effect of the drying step for solvent evaporation in self-etching systems. Attempts to remove the solvents did not increase the extent of polymerization, so other problems are impairing the polymerization of one-step adhesives. CLINICAL SIGNIFICANCE: The use of tested one-step adhesives is discouraged as the attained low extent of polymerization may lead to low bond strength, high susceptibility to degradation and also will favor a continuing etching effect on the underlying dentin.

Effects of HEMA/solvent combinations on bond strength to dentin.

Re-expansion of dried demineralized dentin is required to optimize resin adhesion. This study tested the hypothesis that bond strengths to dentin depend upon the ability of experimental HEMA(2-hydroxy-ethyl-methacrylate)/solvent primers to re-expand the matrix. Dentin surfaces were acid-etched with 37% phosphoric acid for 20 sec, air-dried for 30 sec, primed with either 35/65% (v/v) HEMA/water, HEMA/methanol, HEMA/ethanol, or HEMA/propanol for 60 sec, and bonded with 4-META-TBBO(4-methacryloyloxyethyl trimellitate anhydride-tri-n-butyl borane) adhesive. After storage in water for 1 day at 37 degrees C, the samples were prepared for microtensile bond strength testing. We used transmission electron microscopy to measure the width of interfibrillar spaces in the hybrid layers. The HEMA/ethanol primer and the HEMA/propanol primer produced the highest and the lowest bond strengths, respectively (p < 0.05). Bond strengths were directly correlated with the width of the interfibrillar spaces (p < 0.05). Bond strengths are related to the ability of the primer to maintain the re-expansion of collapsed demineralized dentin matrix.

Effects of long-term high-altitude hypoxia on isolated fetal ovine coronary arteries.

OBJECTIVE: To examine the effects of long-term high-altitude hypoxia on the contractile properties of isolated fetal coronary arteries. METHODS: Maximal contractile responses (T(max)) to 90 mmol/L KCl and the thromboxane A(2) mimetic U46619 were measured in proximal (PLCx) and distal left circumflex (DLCx), left anterior descending (LAD), and right coronary arterial (RCA) rings from high-altitude and control fetuses. Paired studies were conducted with and without nitric oxide synthase (NOS) inhibitors, Nomega-nitro-L-arginine and Nomega-nitro-L-arginine ester. RESULTS: In high-altitude fetuses, 90 mmol/L KCl T(max) responses in both intact and NOS-blocked rings decreased by approximately 62% in PLCx, approximately 59% in DLCx, approximately 57% in LAD, and approximately 47% in RCA (n = 9-18/group; P <.05). High-altitude vessels also exhibited decreased sensitivity to U46619. NOS blockade potentiated T(max) to U46619 in the high-altitude RCA segments and augmented T(max) to U46619 in high-altitude RCA compared with its treated control counterpart (P <. 05). CONCLUSION: These results suggest that nitric oxide influences the pharmacologic responsiveness of the RCA to U46619. Furthermore, long-term high-altitude hypoxia significantly alters the contractile capabilities of fetal coronary arteries. These observations may partially explain the maintained redistribution of cardiac output to the fetal heart during exposure to long-term high-altitude hypoxia.

Ca(2+) sensitivity of fetal coronary arteries exposed to long-term, high-altitude hypoxia.

OBJECTIVE: To determine the contribution of decreased calcium responsiveness of fetal coronary arteries to decreased contractile responses to potassium and the thromboxane A(2) analogue U46619 in these arteries after exposure to chronic hypoxemia. METHODS: Concentration-response curves to Ca(2+) in beta-escin-permeabilized left circumflex (LCx), left anterior descending (LAD), and right coronary artery (RCA) rings from high-altitude (HA) and control (CON) fetuses were measured. In a second set of beta-escin-permeabilized coronary artery rings, the effect of U46619 on Ca(2+) sensitivity was tested. RESULTS: Maximum Ca(2+)-activated force (T(max)) was decreased in HA LCx (CON 0.091+/-0.010 versus HA 0.057+/-0.006 g/cm(2); P<.05) and HA LAD (CON 0.065+/-0.012 versus HA 0.031+/-0.007 g/cm(2); P <.05). No significant difference was observed in the RCA. There was no change in the pD(2) (-log EC(50)) values between CON and HA coronary rings. The Ca(2+) sensitizing effect of U46619 on submaximal Ca(2+)-activated force was lower only in the HA LCx (CON 0.044+/-0.010 versus HA 0.023+/-0.006 g/cm(2) at 10(-5) mol/L; P<.05). CONCLUSION: These results indicate that maximum tension development in response to Ca(2+) was decreased in the HA LCx and LAD but not the RCA; however, Ca(2+) sensitivity of the contractile apparatus was unaltered in all of them. Decreased Ca(2+) responsiveness may partially explain the decreased contractile capability of fetal LCx and LAD during long-term, high-altitude intrauterine hypoxemia.

Determination of iron at ng/ml level by solid phase spectrophotometry after preconcentration on cation exchange filters.

A cationic exchanger paper is used to retain analytes in solution and, after drying, to analyze directly by measuring the UV-Vis absorbance of the paper. The method was applied to determination of iron using its known 1,10-phenanthroline complex. Using 100 ml of sample the applicable concentration range was between 1.0 and 10.0 ng/ml with a detection limit of 0.2 ng/ml and a RSD around 2%. The method was applied to determination of iron total in snow, human serum and wine.