An Overview of the Sustainable Depolymerization/Degradation of Polypropylene Microplastics by Advanced Oxidation Technologies.

Plastics have become indispensable in modern society; however, the proliferation of their waste has become a problem that can no longer be ignored as most plastics are not biodegradable. Depolymerization/degradation through sustainable processes in the context of the circular economy are urgent issues. The presence of multiple types of plastic materials makes it necessary to study the specific characteristics of each material. This mini-review aims to provide an overview of technological approaches and their performance for the depolymerization and/or degradation of one of the most widespread plastic materials, polypropylene (PP). The state of the art is presented, describing the most relevant technologies focusing on advanced oxidation technologies (AOT) and the results obtained so far for some of the approaches, such as ozonation, sonochemistry, or photocatalysis, with the final aim of making more sustainable the PP depolymerization/degradation process.

Nanosponge-C3N4 composites as photocatalysts for selective partial alcohol oxidation in aqueous suspension.

A set of four composite materials was prepared, consisting of a nanosponge matrix based on ß-cyclodextrin in which carbon nitride was dispersed. The materials were characterized by the presence of diverse cross-linker units joining the cyclodextrin moieties, in order to vary the absorption/release abilities of the matrix. The composites were characterized and used as photocatalysts in aqueous medium under UV, visible and natural solar irradiation for the photodegradation of 4-nitrophenol, and for the selective partial oxidation of 5-hydroxymethylfurfural and veratryl alcohol to the corresponding aldehydes. The nanosponge-C3N4 composites showed higher activity than the pristine semiconductor, which can probably be attributed to the synergic effect of the nanosponge, capable of increasing the substrate concentration near the surface of the photocatalyst.

Supported Poly(Ionic Liquid)-Heteropolyacid Based Materials for Heterogeneous Catalytic Fructose Dehydration in Aqueous Medium.

Two sets of four different supported catalyst materials were prepared. One set was obtained by polymerization of a bis-vinylimidazolium salt, which formed a poly(ionic liquid) coating on SiO2, TiO2, boron nitride BN, and carbon nitride C3N4. The other set was, instead, obtained by immobilizing Keggin heteropolyacid H3PW12O40 onto poly-imidazolium functionalized materials. All the catalysts, including the bare supports, were subjected to physical and chemical characterization by XRD, SEM, Specific Surface Area and pore size measurements, TGA, FTIR, and acidity-basicity measurements. The catalytic activity of the materials was tested versus the fructose dehydration in water solution at two different sugar initial concentrations (0.3 and 1 M). Tests lasted 3 h with an amount of catalyst of 2 g∙L−1. The presence of the poly-imidazolium on the surface of the supports increased the catalytic conversion of fructose to 5-hydroxymethylfurfural (the most abundant compound obtained) and was further improved by the contemporary presence of the heteropolyacid, at least for the highest initial fructose concentration. In the latter conditions, the highest yield of 5-hydroxymethylfurfural (>40%) was also obtained.

Catalytic Dehydration of Fructose to 5-Hydroxymethylfurfural in Aqueous Medium over Nb2O5-Based Catalysts.

The catalytic dehydration of fructose to 5-hydroxymethylfurfural (HMF) in water was performed in the presence of pristine Nb2O5 and composites containing Nb and Ti, Ce or Zr oxides. In all experiments, fructose was converted to HMF using water as the solvent. The catalysts were characterized by powder X-ray diffraction, scanning electron microscopy, N2 physical adsorption, infrared and Raman spectroscopy and temperature-programmed desorption of NH3. Experimental parameters such as fructose initial concentration, volume of the reacting suspension, operation temperature, reaction time and amount of catalyst were tuned in order to optimize the catalytic reaction process. The highest selectivity to HMF was ca. 80% in the presence of 0.5 g·L-1 of bare Nb2O5, Nb2O5-TiO2 or Nb2O5-CeO2 with a maximum fructose conversion of ca. 70%. However, the best compromise between high conversion and high selectivity was reached by using 1 g·L-1 of pristine Nb2O5. Indeed, the best result was obtained in the presence of Nb2O5, with a fructose conversion of 76% and a selectivity to HMF of 75%, corresponding to the highest HMF yield (57%). This result was obtained at a temperature of 165° in an autoclave after three hours of reaction by using 6 mL of 1 M fructose suspension with a catalyst amount equal to 1 g·L-1.

Titania-Silica Materials for Enhanced Photocatalysis.

Mesoporous titania-organosilica nanoparticles comprised of anatase nanocrystals crosslinked with organosilica moieties have been prepared by direct co-condensation of a titania precursor, tetrabuthylortotitanate (TBOT), with two organosilica precursors, 1,4-bis(triethoxysilyl) benzene (BTEB) and 1,2-bis(triethoxysilyl) ethane (BTEE), in mild conditions and in the absence of surfactant. These hybrid materials show both high surface areas (200-360 m(2) g(-1) ) and pore volumes (0.3 cm(3) g(-1) ) even after calcination, and excellent photoactivity in the degradation of rhodamine 6G and in the partial oxidation of propene under UV irradiation, especially after the calcination of the samples. During calcination, there is a change in the Ti(IV) coordination and an increase in the content of SiOTi moieties in comparison with the uncalcined materials, which seems to be responsible for the enhanced photocatalytic activity of hybrid titania-silica materials as compared to both uncalcined samples and the control TiO2 .

A survey of photocatalytic materials for environmental remediation.

Heterogeneous photocatalysis is an advanced oxidation process which has been the subject of a huge amount of studies related to air cleaning and water purification. All these processes have been carried out mainly by using TiO(2)-based materials as the photocatalysts and ca. 75% of the articles published in the last 3 years is related to them. This review illustrates the efforts in the search of alternative photocatalysts that are not based on TiO(2), with some exceptions concerning particularly innovative modifications as nanoassembled TiO(2) or TiO(2) composites with active carbon, graphite and fullerene. Papers reporting preparation, characterization and testing of binary, ternary and quaternary compounds, have been reviewed. Despite many of these photocatalysts being effective for the photodecomposition of many pollutants, most of them do not allow a complete mineralization of the starting compounds, differently from TiO(2).

Advances in selective conversions by heterogeneous photocatalysis.

Selective photocatalytic conversions are offering an alternative green route for replacing environmentally hazardous processes with safe and energy efficient routes. This paper reports the most recent advances in the application of heterogeneous photocatalysis to synthesize valuable compounds by selective oxidation and reduction.

Influence of the substituent on selective photocatalytic oxidation of aromatic compounds in aqueous TiO2 suspensions.

Experimental results are reported showing that the photocatalytic oxidation of aromatic compounds containing an electron-donor group (EDG) gives rise mainly to ortho- and para-monohydroxy derivatives while in the presence of an electron-withdrawing group (EWG) all the monohydroxy derivatives are obtained.

TRMC, XPS, and EPR characterizations of polycrystalline TiO2 porphyrin impregnated powders and their catalytic activity for 4-nitrophenol photodegradation in aqueous suspension.

Characterization of polycrystalline TiO(2) bare or porphyrin impregnated powders, used as photocatalysts for the degradation of 4-nitrophenol (4-NP) in aqueous suspension, was performed by time-resolved microwave conductivity (TRMC) measurements and electronic paramagnetic resonance (EPR) and X-ray photoelectron (XPS) spectroscopies. The presence of porphyrin sensitizers, as the metal-free or Cu [5,10,15,20-tetra (4-tert-butylphenyl)] porphyrin, impregnated onto the TiO(2) surface improved the photocatalytic activity of the bare TiO(2). TRMC measurements indicate that the number and lifetime of the photoinduced excess charge carriers increase in the presence of the macrocycles, and EPR and XPS spectroscopies support the mechanistic hypotheses based on the photoreactivity experiments.

Photocatalytic oxidation of methyl-orange in aqueous suspension: comparison of the performance of different polycrystalline titanium dioxide.

The photocatalytic oxidation of methyl-orange (C14H14N3SO3Na) dye was carried out in aqueous suspensions of polycrystalline TiO2 irradiated with artificial light until its complete mineralization was achieved. The performances of two widely used semiconductor powders were studied for comparison purposes. The dependence of dye photo-oxidation rate on various experimental parameters, including substrate concentration, semiconductor amount, and pH was investigated by using both catalysts. The observed dye degradation rates followed pseudo-first order kinetics with respect to the substrate concentration under the experimental conditions used. The two investigated TiO2 powders (Degussa P25 and Merck) showed different photoactivities. TOC analyses confirmed the complete mineralization achievable using both photocatalysts. Three main transient products still maintaining the chromophoric azo group were identified prior to their transformation into other degradation products which are non-absorbing in the visible region.

Azo-dyes photocatalytic degradation in aqueous suspension of TiO2 under solar irradiation.

The photodegradation of two common and very stable azo-dyes, i.e. methyl-orange (C14H14N3SO3Na) and orange II (C16H11N2SO4Na), is reported. The photocatalytic oxidation was carried out in aqueous suspensions of polycrystalline TiO2 irradiated by sunlight. Compound parabolic collectors, installed at the "Plataforma Solar de Almería" (PSA, Spain) were used as the photoreactors and two identical reacting systems allowed to perform photoreactivity runs for the two dyes at the same time and under the same irradiation conditions. The disappearance of colour and substrates together with the abatement of total organic carbon content was monitored. The main sulfonate-containing intermediates were found to be in lower number in respect to those obtained under artificial irradiation. In particular there were no more evidence of the presence of hydroxylated transients. The dependence of dye photooxidation rate on: (i) substrate concentration; (ii) catalyst amount; and (iii) initial pH was investigated. The influence of the presence of strong oxidant species (H2O2, S2O8(2-)) and some ions (Cl-, SO4(2-)) on the process was also studied.

Photocatalytic degradation of actual textile industrial wastewater in aqueous suspensions of polycrystalline TiO2.

Heterogeneous photocatalytic oxidation of contaminants present in wastewater produced by a textile industry was carried out. The samples were withdrawn from the plant before and after a traditional biological treatment. The effluents were named A and A' (before the biological treatment), B and B' (after the biological treatment). Polycrystalline TiO2 (Degussa P25) was used as the catalyst in a batch photoreactor with immersed lamp. An almost complete decolorization was observed after about 0.5 divided by 1 hours for both kinds of effluents, but the decrease of the total organic carbon (TOC) concentration occurred more slowly. The influence of some chemical oxidants, i.e. ozone, hydrogen peroxide and peroxydisulfate on the photo-oxidation rate was also investigated. After addition of H2O2 or S2O8(2-) TOC decreased more quickly only for B and B'. The runs performed by using O3 as bubbling gas showed a mineralization rate higher than that observed in the presence of O2.