The Effect of Prosthetic Joint Infection on Work Status and Quality of Life: A Multicenter, International Study.

BACKGROUND: Periprosthetic joint infection (PJI) and subsequent revision surgeries may affect patients' social and physical health, ability to complete daily activities, and disability status. This study sought to determine how PJI affects patients' quality of life through patient-reported outcome measures with minimum 1-year follow-up. METHODS: Patients who suffered PJI following primary total joint arthroplasty (TJA) from 2012 to 2021 were retrospectively reviewed. Patients met Musculoskeletal Infection Society criteria for acute or chronic PJI, underwent revision TJA surgery, and had at least 1 year of follow-up. Patients were surveyed regarding how PJI affected their work and disability status, as well as their mental and physical health. Outcome measures were compared between acute and chronic PJIs. In total, 318 patients (48.4% total knee arthroplasty and 51.6% total hip arthroplasty) met inclusion criteria. RESULTS: Following surgical treatment for knee and hip PJI, a substantial proportion of patients reported that they were unable to negotiate stairs (20.5%), had worse physical health (39.6%), and suffered worse mental health (25.2%). A high proportion of patients reported worse quality of life (38.5%) and social satisfaction (35.3%) following PJI. Worse reported patient-reported outcome measures including patients' ability to complete daily physical activities were found among patients undergoing treatment for chronic PJI, and also, 23% of patients regretted their initial decision to pursue primary TJA. CONCLUSIONS: A PJI negatively affects patients' ability to carry out everyday activities. This patient population is prone to report challenges overcoming disability and returning to work. Patients should be adequately educated regarding the risk of PJI to decrease later potential regrets. LEVEL OF EVIDENCE: Case series (IV).

Impact of Anesthetic Choice on Time to Discharge for Same-Day Discharge Joints.

BACKGROUND: As total joint arthroplasty programs continue to move towards same-day discharge (SDD), time to discharge is an increasingly important performance indicator. The primary objective of this study was to determine the impact of the choice of anesthetic on the time to discharge after SDD primary hip and knee arthroplasty. METHODS: A retrospective chart review was conducted within our SDD arthroplasty program, with 261 patients identified for analysis. Baseline characteristics, length of surgery, anesthetic drug, dose, and perioperative complications were extracted and recorded. The time from the patient leaving the operating room to physiotherapy assessment and from the operating room to discharge were recorded. These were referred to as ambulation time and discharge time, respectively. RESULTS: The ambulation time was significantly reduced when hypobaric lidocaine was used in a spinal block compared to isobaric or hyperbaric bupivacaine-135 minutes (range, 39 to 286), 305 minutes (range, 46 to 591), and 227 minutes (range, 77 to 387), respectively-(P < .0001). Similarly, the discharge time was also significantly lower with hypobaric lidocaine compared to isobaric bupivacaine, hyperbaric bupivacaine, and general anesthesia-276 minutes (range, 179 to 461), 426 minutes (range, 267 to 623), 375 minutes (range, 221 to 511), and 371 minutes (range, 217 to 570), respectively-(P < .0001). No cases of transient neurologic symptoms were reported. CONCLUSION: Patients receiving a hypobaric lidocaine spinal block experienced significantly reduced ambulation time and time to discharge compared to other anesthetics. Surgical teams should feel confident in using hypobaric lidocaine during spinal anesthesia as it is rapid and efficacious.

Management of Periprosthetic Joint Infections After Hemiarthroplasty of the Hip: A Critical Analysis Review.

➢: Periprosthetic joint infection (PJI) following hip hemiarthroplasty (HA) is a devastating complication, incurring immense health-care costs associated with its treatment and placing considerable burden on patients and their families. These patients often require multiple surgical procedures, extended hospitalization, and prolonged antimicrobial therapy. ➢: Notable risk factors include older age, higher American Society of Anesthesiologists (ASA) score, inadequate antibiotic prophylaxis, non-antibiotic-loaded cementation of the femoral implant, longer duration of the surgical procedure, and postoperative drainage and hematoma. ➢: Although the most frequent infecting organisms are gram-positive cocci such as Staphylococcus aureus, there is a higher proportion of patients with gram-negative and polymicrobial infections after hip HA compared with patients who underwent total hip arthroplasty. ➢: Several surgical strategies exist. Regardless of the preferred surgical treatment, successful management of these infections requires a comprehensive surgical debridement focused on eradicating the biofilm followed by appropriate antibiotic therapy. ➢: A multidisciplinary approach led by surgeons familiar with PJI treatment and infectious disease specialists is recommended for all cases of PJI after hip HA to increase the likelihood of treatment success.

Hip Arthroplasty With the Use of a Reconstruction Cage and Porous Metal Augment to Treat Massive Acetabular Bone Loss: A Midterm Follow-Up.

BACKGROUND: Acetabular reconstruction in the context of massive acetabular bone loss is challenging. In rare scenarios where the extent of bone loss precludes shell placement (cup-cage), reconstruction at our center consisted of a cage combined with highly porous metal augments. This study evaluates survivorship, complications, and functional outcomes using this technique. METHODS: Patients with minimum 2-year follow-up were included. Baseline characteristics were collected. Preintervention and postintervention ambulatory scores were collected. Kaplan-Meier (KM) survival analysis for cage failure requiring revision surgery was conducted. Binomial regression analysis was performed to assess for correlation of aseptic cage failure with baseline characteristics. Preintervention and postintervention ambulatory aid requirements were compared. RESULTS: A total of 41 patients were identified. Mean follow-up was 6.4 years (range 2.8-11.0). Four (9.8%) aseptic cage revisions were identified. Aseptic KM survival analysis was 87.4% (95% confidence interval 75.3-99.6) at 10 years. Aseptic KM survival was 45.0% versus 92.8% at 9 years (P = .14) for patients with vs without pelvic discontinuity. KM survival for all-cause failure was 61.6% (95% confidence interval 44.0-79.2) at 10 years. Binomial regression did not demonstrate correlation of cage failure with baseline characteristics. Wilcoxon signed-rank test demonstrated a significant reduction in ambulatory aide requirement after surgery (mean rank 11.47 vs 9.00, Z = -2.95, P = .003). CONCLUSION: In scenarios of massive acetabular bone loss where a cup-cage is not a viable option, good survivorship free from aseptic cage failure can be expected at mid-term follow-up using an antiprotrusio cage combined with porous metal augments. Success requires extensive experience in revision surgery.

Does Revision of an Acetabular Shell With Insertion of an Uncemented Constrained Liner Confer Benefit Over Cementing Into a Well-Ingrown Shell?

BACKGROUND: During revision total hip arthroplasty (THA), a constrained acetabular liner (CAL) may be inserted to enhance hip stability. It is unclear, however, whether cementation of a CAL into a retained cup offers an advantage compared to revision of the acetabular cup and insertion of an uncemented CAL. The purpose of our study was to compare outcomes and survivorship between the 2 methods. METHODS: We identified a total of 177 patients who underwent revision THA with a specific CAL at our center between July 2004 and May 2019 (114 cup revisions and insertion of an uncemented CAL, 63 cementations of a CAL into a retained cup). Kaplan-Meier (KM) survival analysis was performed for implant survival free from aseptic failure of the CAL for both cohorts. RESULTS: The average follow-up time was 7.2 and 7.02 years for the cemented and uncemented cohort, respectively (P = .55). Five patients (7.93%) in the cemented CAL group experienced failure of the CAL, whereas 10 patients (8.77%) in the uncemented CAL cohort experienced failure (P = .21). Kaplan-Meier (KM) survival analysis demonstrated comparable survivorship at 10 years (P = .055). CONCLUSION: The results of our study suggest comparable survivorship between cementing a CAL into a retained cup and inserting an uncemented CAL in a revised acetabular cup. As a result of these findings along with the benefits associated with cementing a CAL, we encourage surgeons to readily consider this option in the management of recurrent instability.

Increased Rates of Tibial Aseptic Loosening in Primary Cemented Total Knee Arthroplasty With a Short Native Tibial Stem Design.

BACKGROUND: Emerging evidence has suggested that both obesity and a short, native tibial stem (TS) design may be associated with early aseptic loosening in total knee arthroplasty. The use of short, fully cemented stem extensions may mitigate this risk. As such, we devised a multicenter study to confirm or negate these claims. METHODS: A search of our institutional research databases was done. A minimum 2-year time from index procedure was selected. Cohorts were created according to patient body mass index and the presence (stemmed tibia [ST]) or absence (nonstemmed tibia [NST]) of a short TS extension. Kaplan-Meier survival analyses for aseptic loosening and log-rank tests were done. RESULTS: A total of 1,350 patients were identified (ST = 500, NST = 850). The mean time to the final follow-up in cases without aseptic loosening for the ST cohort was 3.5 years (2.8-6.3) and 5.0 years (2.9-6.3) for the NST cohort (P < 0.001). Kaplan-Meier survival analysis at 6 years was superior for the ST cohort (100%, 98.5%; P = 0.025), and a trend toward superior 5-year survival was observed for body mass index <40 kg/m2 (99.1%, 93.2%; P = 0.066). The mean time to aseptic loosening was 2.4 years (0.9-4.5), with approximately 40% occurring within the first 2 years. CONCLUSIONS: Short, native TS design is associated with early aseptic loosening in primary cemented total knee arthroplasty. This can be mitigated through the use of an ST. More cost-effective solutions include (1) use of implants with longer native stem designs or (2) redesign of short TS implants.

Lack of small tibial component size availability for females in a highly utilized total knee arthroplasty system.

PURPOSE: Surgeons must rely on manufacturers to provide an appropriate distribution of total knee arthroplasty (TKA) sizes. There is a lack of literature regarding current appropriateness of tibial sizing schemes according to sex. As such, a study was devised assessing the adequacy of off-the-shelf tibial component size availability according to sex. METHODS: A search was conducted to identify all primary TKAs between July 2012 and June 2019 performed using a single implant. Baseline patient characteristics were collected (age, weight, height, BMI, and race). Two cohorts were created according to patient sex. Tibial sizes for each cohort were collected. Tibial component bar graph and histogram were created according to component sizes. Skewness and kurtosis were calculated for each distribution. Overhang was noted and measured radiographically. RESULTS: A total of 864 patients were identified, 38.7% males and 61.3% females. Most patients were Caucasian, and BMI was similar between cohorts. Tibial size distribution for males was as follows: 0.3% C, 4.8% D, 16.5% E, 40.1% F, 31.4% G, 6.9% H. Tibial size distribution for females was as follows: 30.8% C, 42.8% D, 23.0% E, 2.6% F, 0.8% G, 0.0% H. Histograms and normal curves demonstrated a fairly symmetric distribution of sizes for males (skewness = - 0.31, kurtosis = - 0.03). The distribution for females was positively skewed (skewness = 0.57, kurtosis = 0.12). Overall, overhang was noted in 16.6% of all size C tibias. CONCLUSIONS: The results of this study highlight an implant-specific discrepancy in size availability affecting female patients which could result in inferior outcomes. The authors urge manufacturers to critically assess current implant size distribution availability to ensure both genders are adequately, and equally represented. LEVEL OF EVIDENCE: IV.

The Effect of Femoral Head Size, Neck Length, and Offset on Dislocation Rates of Constrained Acetabular Liners.

BACKGROUND: Constrained acetabular liners (CALs) are used in both primary and revision total hip arthroplasty in cases where stability and abductor deficiency are of concern. The efficacy of CALs has been shown to be design dependent. There is clear evidence that the use of small head sizes and shorter offset in unconstrained total hip arthroplasty is associated with higher rates of dislocation. To our knowledge, no such study has assessed the effect of femoral head size, neck length, and offset for CALs. METHODS: We performed a retrospective study assessing the outcomes of CALs with minimum 2-year follow-up. A Kaplan-Meier survivorship analysis was conducted for all patients and for patients revised for instability. A binomial regression analysis was performed to assess for variables significantly associated with CAL failure. RESULTS: A total of 285 CALs in 281 patients were identified with a mean follow-up of 5.7 years. Ten-year Kaplan-Meier survival analyses were as follows: all indication 91.9% vs instability 85.5% (P = .15). Increasing neck length was associated with lower rates of failure (odds ratio, 0.81; P = .042). Femoral head size, offset, and abductor reconstruction were not significantly associated with CAL failure. CONCLUSION: Larger head size has not been demonstrated to lead to lower failure in CALs. Increasing neck length was associated with lower failure rate. Surgeons should be cautious when attempting to ream to larger acetabular shell sizes for the purpose of using larger heads with CALs. Increasing neck length may instead be targeted intraoperatively.

Revision Hip Arthroplasty Using a Porous-coated or Taper ZMR Implant: Minimum 10-year Follow-up of Implant Survivorship.

INTRODUCTION: The Zimmer Modular Revision hip (ZMR) system is available in two stem options, a porous-coated cylindrical (PCM) and a taper (TM) stem. Several concerns have been reported regarding modular implants. Specifically, because of early junctional fractures, the ZMR system was redesigned with a wider modular interface. As such, we designed a study assessing long-term ZMR survivorship and functional and radiographic outcomes. METHODS AND MATERIALS: A search of our institutional research database was performed. A minimum 10-year follow-up was selected. The following two cohorts were created: PCM and TM stems. The Kaplan-Meier survival analysis was performed, and causes of stem failure requiring revision surgery were collected. Functional outcomes as per the Harris Hip Score and radiographic stem stability were assessed as per the Engh classification. RESULTS: A total of 146 patients meeting the inclusion criteria were available for follow-up (PCM = 68, TM = 78). The mean follow-up was 13.4 years clinically and 11.1 years radiographically for the PCM cohort. Similarly, the TM cohort had a follow-up of 11.1 years clinically and 10.5 years radiographically. The Kaplan-Meier survivorships were 87.1% and 87.8% at 15 years for the PCM and TM cohorts, respectively. The most common cause of failure requiring revision surgery overall was aseptic loosening (PCM = 1.4%, TM = 5.6%). The mean postoperative Harris Hip Score was as follows: PCM = 71.2 and TM = 64.7. Engh type I or II stem ingrowth was as follows: PCM = 85% and TM = 68%. DISCUSSION: Good survivorship using the ZMR stem system can be expected at up to 15 years. Aseptic loosening remains the most commonly encountered problem for both PCM and TM stems. Previously identified modular junctional weakness seem to have been addressed.

Management Options and Outcomes for Patients with Femoral Fractures with Post-Polio Syndrome of the Lower Extremity: A Critical Analysis Review.

Post-polio syndrome is characterized by a late functional deterioration (usually after >=15 years from the initial infection) in patients with a history of paralytic poliomyelitis infection, and it is defined by the March of Dimes criteria. Patients with post-polio syndrome are at increased risk for falls and associated hip and femoral fractures as a result of lower bone mineral density, decreased lean muscle mass, and musculoskeletal deformities. Current evidence suggests that treatment modalities for femoral fractures should emphasize fixation that allows early progressive weight-bearing and ambulation to optimize functional outcomes. Good results after hip arthroplasty have been described with both cemented and uncemented implants in patients who have been treated for osteoarthritis, but there has been little evidence guiding hip fracture management. Anatomic challenges that are encountered are osteoporotic bone, a valgus neck-shaft angle, increased femoral anteversion, and a small femoral canal diameter. Intramedullary nailing of hip and femoral fractures can be challenging due to the small femoral canal diameter that frequently is encountered. Alternative methods of fixation have shown promising results. These include the use of sliding hip screws for hip fracture management and fixed-angle locking plates for hip and femoral fracture management.

The Effect of Polyethylene Liner Thickness on Patient Outcomes and Failure After Primary Total Knee Arthroplasty.

BACKGROUND: The effect of using thicker liners in primary total knee arthroplasty (TKA) on functional outcomes and aseptic failure rates remains largely unknown. As such, we devised a multicenter study to assess both the clinical outcomes and survivorship of thick vs thin liners after primary TKA. METHODS: A search of our institutional databases was performed for patients having undergone bilateral (simultaneous or staged) primary TKA with similar preoperative and surgical characteristics between both sides. Two cohorts were created: thick liners and thin liners. Outcomes collected were as follows: change in Knee Society Score (ΔKSS), change in range of motion, and aseptic revision. Ad hoc power analysis was performed for ΔKSS (⍺ = 0.05; power = 80%). Differences between cohorts were assessed. RESULTS: About 195 TKAs were identified for each cohort. ΔKSS and change in range of motion in the thin vs thick cohorts were similar: 51.4 vs 51.6 (P = .86) and 11.1° vs 10.0° (P = .66), respectively. No difference in aseptic revision rates were observed between thin and thick cohorts: all cause (4.1%, 3.1%; P = .59), aseptic loosening (0.5%, 0.5%; P = 1.0), instability (0.5%, 0.5%; P = 1.0), all-cause revision for stiffness (3.1%, 2.1%; P = .52), manipulation under anesthesia (2.1%, 2.1%; P = 1.0), and liner exchange (0.5%, 0%; P = .32). CONCLUSION: The results of this study suggest that both rates of revision surgery and clinical outcomes are similar for TKAs performed with thick and thin liners. Preoperative factors are likely to play an important role in liner thickness selection, and emphasis should be placed on ensuring sound surgical technique.

Reduced Aseptic Loosening With Fully Cemented Short-Stemmed Tibial Components in Primary Cemented Total Knee Arthroplasty.

BACKGROUND: Recently, the use of short tibial stems in the obese population undergoing total knee arthroplasty (TKA) has been proposed. Thus, we designed a study to assess tibial component survivorship after primary TKA using a single implant both with and without a fully cemented stem extension performed by a single surgeon. METHODS: A search of our institutional research database was performed. A minimum 2-year follow-up was selected. Cohorts were created according to patient body mass index (BMI; >40 kg/m2 and <40 kg/m2) and the presence (stemmed tibia [ST]) or absence (non-stemmed tibia [NST]) of a short tibial stem extension. Kaplan-Meier survival analyses for aseptic loosening and log-rank tests were performed. RESULTS: A total of 236 patients were identified (ST = 162, NST = 74). Baseline patient characteristics were statistically similar between cohorts with the exception of BMI which was greater in the ST cohort (32.9 kg/m2, 30.6 kg/m2; P = .01). Kaplan-Meier survival analysis at 5 years was superior for the BMI < 40 kg/m2 cohort (98.9%, 93.1%; P = .045), the ST cohort (100%, 94.5%; P = .006), and the BMI > 40 kg/m2 with ST cohort at 4 years (71.4%, 100%; P = .008). CONCLUSION: Morbid obesity and a short native tibial stem design appear to be associated with aseptic loosening in primary TKA. This appears to be mitigated through the use of an ST. As such, the use of ST may be considered in at-risk patients. Alternatively, implants with longer native stem designs can be employed. Modern short-stemmed tibial components may need to be redesigned.