ABSTRACT
An eco-friendly epoxy/thiol-ene photopolymerization (ETEP) process was employed to prepare epoxy bio-composites using a commercial biobased epoxy resin and a woven jute fabric as reinforcement. In this process the components of the thiol-ene system, an allyl-functionalized ditertiary amine curing agent, a multifunctional thiol and a radical photoinitiator, were added to the epoxy resin to produce a polyether-polythioether crosslinked co-network. Moreover, the jute fibers were functionalized with thiol groups using the 3-mercaptopropyl (trimethoxysilane) with the purpose of creating a chemically bonded polymeric matrix/fiber system. The obtained bio-composites prepared with the thiol-functionalized cellulose fibers exhibited an increase up to 52% and 40% in flexural modulus and strength with respect to the non-functionalized counterparts. Under the three-point bending loadings, the composites displayed higher deformation at break and toughness due to the presence of polythioethers in the co-network. The prepared bio-composites developed in this work are excellent candidates to extend the use of cellulose fibers for structural applications.
ABSTRACT
In this work was evaluated the efficiency of an antishrinkage additive in a dental resin. This additive was a mixture 1:1 of five and six-membered ring spiroorthocarbonates functionalized with allylic groups (SOC DA). The aim of this study was to reduce the shrinkage of a typical dental resin composed of a blend of the dimethacrylates, Glycerolate bisphenol A dimethacrylate (Bis-GMA)/2-[(3,5,5-trimethyl-6-[2-(2-methyl prop-2-enoyloxy) ethoxycarbonylamino] hexyl) carbamoyloxy] ethyl, 2-methyl prop-2-enoate, (UDMA)/triethyleneglycol dimethacrylate (TEGDMA) in a 50:30.20 molar ratio, and silicon dioxide as filler. SOC DA was added at 5, 10 and 20 mol% to the already mentioned formulation. It was found that the addition of 20 mol% of SOC DA decreased 53 % the shrinkage of the cured composite material, in comparison with a formulation where it was not added the antishrinkage additive. Besides, the kinetics of photopolymerization determined by Real-Time infrared spectroscopy, demonstrated that the addition of increasing concentration of SOC DA improved the conversion of double bonds of dimethacrylates. Additionally, the presence of SOC DA at 10 % mol, helped to increase the flexural strength and the compressive strength of the composite, as a consequence of the augment of the crosslink density, induced by the ring opening polymerization of SOC DA.
