Digital health technologies and machine learning augment patient reported outcomes to remotely characterise rheumatoid arthritis.

Digital measures of health status captured during daily life could greatly augment current in-clinic assessments for rheumatoid arthritis (RA), to enable better assessment of disease progression and impact. This work presents results from weaRAble-PRO, a 14-day observational study, which aimed to investigate how digital health technologies (DHT), such as smartphones and wearables, could augment patient reported outcomes (PRO) to determine RA status and severity in a study of 30 moderate-to-severe RA patients, compared to 30 matched healthy controls (HC). Sensor-based measures of health status, mobility, dexterity, fatigue, and other RA specific symptoms were extracted from daily iPhone guided tests (GT), as well as actigraphy and heart rate sensor data, which was passively recorded from patients' Apple smartwatch continuously over the study duration. We subsequently developed a machine learning (ML) framework to distinguish RA status and to estimate RA severity. It was found that daily wearable sensor-outcomes robustly distinguished RA from HC participants (F1, 0.807). Furthermore, by day 7 of the study (half-way), a sufficient volume of data had been collected to reliably capture the characteristics of RA participants. In addition, we observed that the detection of RA severity levels could be improved by augmenting standard patient reported outcomes with sensor-based features (F1, 0.833) in comparison to using PRO assessments alone (F1, 0.759), and that the combination of modalities could reliability measure continuous RA severity, as determined by the clinician-assessed RAPID-3 score at baseline (r2, 0.692; RMSE, 1.33). The ability to measure the impact of the disease during daily life-through objective and remote digital outcomes-paves the way forward to enable the development of more patient-centric and personalised measurements for use in RA clinical trials.

Patient-centric assessment of rheumatoid arthritis using a smartwatch and bespoke mobile app in a clinical setting.

Rheumatoid arthritis (RA) is a fluctuating progressive disease requiring frequent symptom assessment for appropriate management. Continuous tracking using digital technologies may provide greater insights of a patient's experience. This prospective study assessed the feasibility, reliability, and clinical utility of using novel digital technologies to remotely monitor participants with RA. Participants with moderate to severe RA and non-RA controls were monitored continuously for 14 days using an iPhone with an integrated bespoke application and an Apple Watch. Participants completed patient-reported outcome measures and objective guided tests designed to assess disease-related impact on physical function. The study was completed by 28 participants with RA, 28 matched controls, and 2 unmatched controls. Completion rates for all assessments were > 97% and were reproducible over time. Several guided tests distinguished between RA and control cohorts (e.g., mean lie-to-stand time [seconds]: RA: 4.77, control: 3.25; P < 0.001). Participants with RA reporting greater stiffness, pain, and fatigue had worse guided test performances (e.g., wrist movement [P < 0.001] and sit-to-stand transition time [P = 0.009]) compared with those reporting lower stiffness, pain, and fatigue. This study demonstrates that digital technologies can be used in a well-controlled, remote clinical setting to assess the daily impact of RA.

Digital biomarkers for post-licensure safety monitoring.

Post-licensure safety data form the cornerstone of safety surveillance. However, such data have some limitations related to the subjectiveness of reporting and recording, primary purpose of the collected data, or heterogeneity. Routine capture of richer data would in part help mitigate these limitations, enabling earlier, more reliable safety insights. Digital health tools that remotely acquire health-related information are increasingly available and used by patients and the wider population. However, they are rarely used for pharmacovigilance purposes. Here, we review different cases that reveal the opportunities and challenges of using these technologies for enhanced safety assessment in routine healthcare delivery. We believe such approaches will advance our understanding of the safety of drugs and vaccines in the future.

Developing a Novel Measurement of Sleep in Rheumatoid Arthritis: Study Proposal for Approach and Considerations.

The development of novel digital endpoints (NDEs) using digital health technologies (DHTs) may provide opportunities to transform drug development. It requires a multidisciplinary, multi-study approach with strategic planning and a regulatory-guided pathway to achieve regulatory and clinical acceptance. Many NDEs have been explored; however, success has been limited. To advance industry use of NDEs to support drug development, we outline a theoretical, methodological study as a use-case proposal to describe the process and considerations when developing and obtaining regulatory acceptance for an NDE to assess sleep in patients with rheumatoid arthritis (RA). RA patients often suffer joint pain, fatigue, and sleep disturbances (SDs). Although many researchers have investigated the mobility of joint functions using wearable technologies, the research of SD in RA has been limited due to the availability of suitable technologies. We proposed measuring the improvement of sleep as the novel endpoint for an anti-TNF therapy and described the meaningfulness of the measure, considerations of tool selection, and the design of clinical validation. The recommendations from the FDA patient-focused drug development guidance, the Clinical Trials Transformation Initiative (CTTI) pathway for developing novel endpoints from DHTs, and the V3 framework developed by the Digital Medicine Society (DiMe) have been incorporated in the proposal. Regulatory strategy and engagement pathways are also discussed.

Developing Smartphone-Based Objective Assessments of Physical Function in Rheumatoid Arthritis Patients: The PARADE Study.

BACKGROUND: Digital biomarkers that measure physical activity and mobility are of great interest in the assessment of chronic diseases such as rheumatoid arthritis, as it provides insights on patients' quality of life that can be reliably compared across a whole population. OBJECTIVE: To investigate the feasibility of analyzing iPhone sensor data collected remotely by means of a mobile software application in order to derive meaningful information on functional ability in rheumatoid arthritis patients. METHODS: Two objective, active tasks were made available to the study participants: a wrist joint motion test and a walk test, both performed remotely and without any medical supervision. During these tasks, gyroscope and accelerometer time-series data were captured. Processing schemes were developed using machine learning techniques such as logistic regression as well as explicitly programmed algorithms to assess data quality in both tasks. Motion-specific features including wrist joint range of motion (ROM) in flexion-extension (for the wrist motion test) and gait parameters (for the walk test) were extracted from high quality data and compared with subjective pain and mobility parameters, separately captured via the application. RESULTS: Out of 646 wrist joint motion samples collected, 289 (45%) were high quality. Data collected for the walk test included 2,583 samples (through 867 executions of the test) from which 651 (25%) were high quality. Further analysis of high-quality data highlighted links between reduced mobility and increased symptom severity. ANOVA testing showed statistically significant differences in wrist joint ROM between groups with light-moderate (220 participants) versus severe (36 participants) wrist pain (p < 0.001) as well as in average step times between groups with slight versus moderate problems walking about (p < 0.03). CONCLUSION: These findings demonstrate the potential to capture and quantify meaningful objective clinical information remotely using iPhone sensors and represent an early step towards the development of patient-centric digital endpoints for clinical trials in rheumatoid arthritis.

The use of biotelemetry to explore disease progression markers in amyotrophic lateral sclerosis.

OBJECTIVE: To explore novel, real-world biotelemetry disease progression markers in patients with amyotrophic lateral sclerosis (ALS) and to compare with clinical gold-standard measures. Methods: This was an exploratory, non-controlled, non-drug 2-phase study comprising a variable length Pilot Phase (n = 5) and a 48-week Core study Phase (n = 25; NCT02447952). Patients with mild or moderate ALS wore biotelemetry sensors for ∼3 days/month at home, measuring physical activity, heart rate variability (HRV), and speech over 48 weeks. These measures were assessed longitudinally in relation to ALS Functional Rating Scale-Revised (ALSFRS-R) score and forced vital capacity (FVC); assessed by telephone [monthly] and clinic visits [every 12 weeks]). Results: Pilot Phase data supported progression into the Core Phase, where a decline in physical activity from baseline followed ALS progression as measured by ALSFRS-R and FVC. Four endpoints showed moderate or strong between-patient correlations with ALSFRS-R total and gross motor domain scores (defined as a correlation coefficient of ≥0.5 or >0.7, respectively): average daytime active; percentage of daytime active; total daytime activity score; total 24-hour activity score. Moderate correlations were observed between speech endpoints and ALSFRS-R bulbar domain scores; HRV data quality was insufficient for reliable assessment. The sensor was generally well tolerated; 6/25 patients reported mostly mild or moderate intensity skin and subcutaneous tissue disorder adverse events. Conclusions: Biotelemetry measures of physical activity in this Pilot Study tracked ALS progression over time, highlighting their potential as endpoints for future clinical trials. A larger, formally powered study is required to further support activity endpoints as novel disease progression markers.

Precompetitive Consensus Building to Facilitate the Use of Digital Health Technologies to Support Parkinson Disease Drug Development through Regulatory Science.

Innovative tools are urgently needed to accelerate the evaluation and subsequent approval of novel treatments that may slow, halt, or reverse the relentless progression of Parkinson disease (PD). Therapies that intervene early in the disease continuum are a priority for the many candidates in the drug development pipeline. There is a paucity of sensitive and objective, yet clinically interpretable, measures that can capture meaningful aspects of the disease. This poses a major challenge for the development of new therapies and is compounded by the considerable heterogeneity in clinical manifestations across patients and the fluctuating nature of many signs and symptoms of PD. Digital health technologies (DHT), such as smartphone applications, wearable sensors, and digital diaries, have the potential to address many of these gaps by enabling the objective, remote, and frequent measurement of PD signs and symptoms in natural living environments. The current climate of the COVID-19 pandemic creates a heightened sense of urgency for effective implementation of such strategies. In order for these technologies to be adopted in drug development studies, a regulatory-aligned consensus on best practices in implementing appropriate technologies, including the collection, processing, and interpretation of digital sensor data, is required. A growing number of collaborative initiatives are being launched to identify effective ways to advance the use of DHT in PD clinical trials. The Critical Path for Parkinson's Consortium of the Critical Path Institute is highlighted as a case example where stakeholders collectively engaged regulatory agencies on the effective use of DHT in PD clinical trials. Global regulatory agencies, including the US Food and Drug Administration and the European Medicines Agency, are encouraging the efficiencies of data-driven engagements through multistakeholder consortia. To this end, we review how the advancement of DHT can be most effectively achieved by aligning knowledge, expertise, and data sharing in ways that maximize efficiencies.

Objectively Monitoring Amyotrophic Lateral Sclerosis Patient Symptoms During Clinical Trials With Sensors: Observational Study.

BACKGROUND: Objective symptom monitoring of patients with Amyotrophic Lateral Sclerosis (ALS) has the potential to provide an important source of information to evaluate the impact of the disease on aspects of real-world functional capacity and activities of daily living in the home setting, providing useful objective outcome measures for clinical trials. OBJECTIVE: This study aimed to investigate the feasibility of a novel digital platform for remote data collection of multiple symptoms-physical activity, heart rate variability (HRV), and digital speech characteristics-in 25 patients with ALS in an observational clinical trial setting to explore the impact of the devices on patients' everyday life and to record tolerability related to the devices and study procedures over 48 weeks. METHODS: In this exploratory, noncontrolled, nondrug study, patients attended a clinical site visit every 3 months to perform activity reference tasks while wearing a sensor, to conduct digital speech tests and for conventional ALS monitoring. In addition, patients wore the sensor in their daily life for approximately 3 days every month for the duration of the study. RESULTS: The amount and quality of digital speech data captured at the clinical sites were as intended, and there were no significant issues. All the home monitoring sensor data available were propagated through the system and were received as expected. However, the amount and quality of physical activity home monitoring data were lower than anticipated. A total of 3 or more days (or partial days) of data were recorded for 65% of protocol time points, with no data collected for 24% of time points. At baseline, 24 of 25 patients provided data, reduced to 13 of 18 patients at Week 48. Lower-than-expected quality HRV data were obtained, likely because of poor contact between the sensor and the skin. In total, 6 of 25 patients had mild or moderate adverse events (AEs) in the skin and subcutaneous tissue disorders category because of skin irritation caused by the electrode patch. There were no reports of serious AEs or deaths. Most patients found the sensor comfortable, with no or minimal impact on daily activities. CONCLUSIONS: The platform can measure physical activity in patients with ALS in their home environment; patients used the equipment successfully, and it was generally well tolerated. The quantity of home monitoring physical activity data was lower than expected, although it was sufficient to allow investigation of novel physical activity end points. Good-quality in-clinic speech data were successfully captured for analysis. Future studies using objective patient monitoring approaches, combined with the most current technological advances, may be useful to elucidate novel digital biomarkers of disease progression.

Using a ResearchKit Smartphone App to Collect Rheumatoid Arthritis Symptoms From Real-World Participants: Feasibility Study.

BACKGROUND: Using smartphones to enroll, obtain consent, and gather self-reported data from patients has the potential to enhance our understanding of disease burden and quantify physiological impact in the real world. It may also be possible to harness integral smartphone sensors to facilitate remote collection of clinically relevant data. OBJECTIVE: We conducted the Patient Rheumatoid Arthritis Data From the Real World (PARADE) observational study using a customized ResearchKit app with a bring-your-own-device approach. Our objective was to assess the feasibility of using an entirely digital approach (social media and smartphone app) to conduct a real-world observational study of patients with rheumatoid arthritis. METHODS: We conducted this observational study using a customized ResearchKit app with a bring-your-own-device approach. To recruit patients, the PARADE app, designed to guide patients through a series of tasks, was publicized via social media platforms and made available for patients in the United States to download from the Apple App Store. We collected patient-reported data, such as medical history, rheumatoid arthritis-related medications (past and present), and a range of patient-reported outcome measures. We included in the assessment a joint-pain map and a novel objective assessment of wrist range of movement, measured by the smartphone-embedded gyroscope and accelerometer. RESULTS: Within 1 month of recruitment via social media campaigns, 399 participants self-enrolled, self-consented, and provided complete demographic data. Joint pain was the most frequently reported rheumatoid arthritis symptom to bother study participants (344/393, 87.5%). Severe patient-reported wrist pain appeared to be inversely linked with the range of wrist movement measured objectively by the app. At study entry, 292 of 399 participants (73.2%) indicated a preference for participating in a mobile app-based study. The number of participants in the study declined to 45 of 399 (11.3%) at week 12. CONCLUSIONS: Despite the declining number of participants over time, the combination of social media and smartphone app with sensor integration was a feasible and cost-effective approach for the collection of patient-reported data in rheumatoid arthritis. Integral sensors within smartphones can be harnessed to provide novel end points, and the novel wrist range of movement test warrants further clinical validation.

Developing Fine-Grained Actigraphies for Rheumatoid Arthritis Patients from a Single Accelerometer Using Machine Learning.

In addition to routine clinical examination, unobtrusive and physical monitoring of Rheumatoid Arthritis (RA) patients provides an important source of information to enable understanding the impact of the disease on quality of life. Besides an increase in sedentary behaviour, pain in RA can negatively impact simple physical activities such as getting out of bed and standing up from a chair. The objective of this work is to develop a method that can generate fine-grained actigraphies to capture the impact of the disease on the daily activities of patients. A processing methodology is presented to automatically tag activity accelerometer data from a cohort of moderate-to-severe RA patients. A study of procesing methods based on machine learning and deep learning is provided. Thirty subjects, 10 RA patients and 20 healthy control subjects, were recruited in the study. A single tri-axial accelerometer was attached to the position of the fifth lumbar vertebra (L5) of each subject with a tag prediction granularity of 3 s. The proposed method is capable of handling unbalanced datasets from tagged data while accounting for long-duration activities such as sitting and lying, as well as short transitions such as sit-to-stand or lying-to-sit. The methodology also includes a novel mechanism for automatically applying a threshold to predictions by their confidence levels, in addition to a logical filter to correct for infeasible sequences of activities. Performance tests showed that the method was able to achieve around 95% accuracy and 81% F-score. The produced actigraphies can be helpful to generate objective RA disease-specific markers of patient mobility in-between clinical site visits.

Microfabrication of electrode patterns for high-frequency ultrasound transducer arrays.

High-frequency ultrasound is needed for medical imaging with high spatial resolution. A key issue in the development of ultrasound imaging arrays to operate at high frequencies (≥30 MHz) is the need for photolithographic patterning of array electrodes. To achieve this directly on 1-3 piezocomposite, the material requires not only planar, parallel, and smooth surfaces, but also an epoxy composite filler that is resistant to chemicals, heat, and vacuum. This paper reports, first, on the surface finishing of 1-3 piezocomposite materials by lapping and polishing. Excellent surface flatness has been obtained, with an average surface roughness of materials as low as 3 nm and step heights between ceramic/polymer of ∼80 nm. Subsequently, high-frequency array elements were patterned directly on top of these surfaces using a photolithography process. A 30-MHz linear array electrode pattern with 50-µm element pitch has been patterned on the lapped and polished surface of a high-frequency 1-3 piezocomposite. Excellent electrode edge definition and electrical contact to the composite were obtained. The composite has been lapped to a final thickness of ∼55 µm. Good adhesion of electrodes on the piezocomposite has been achieved and electrical impedance measurements have demonstrated their basic functionality. The array was then packaged, and acoustic pulse-echo measurements were performed. These results demonstrate that direct patterning of electrodes by photolithography on 1-3 piezocomposite is feasible for fabrication of high-frequency ultrasound arrays. Furthermore, this method is more conducive to mass production than other reported array fabrication techniques.

A critical review of glucose biosensors based on carbon nanomaterials: carbon nanotubes and graphene.

There has been an explosion of research into the physical and chemical properties of carbon-based nanomaterials, since the discovery of carbon nanotubes (CNTs) by Iijima in 1991. Carbon nanomaterials offer unique advantages in several areas, like high surface-volume ratio, high electrical conductivity, chemical stability and strong mechanical strength, and are thus frequently being incorporated into sensing elements. Carbon nanomaterial-based sensors generally have higher sensitivities and a lower detection limit than conventional ones. In this review, a brief history of glucose biosensors is firstly presented. The carbon nanotube and grapheme-based biosensors, are introduced in Sections 3 and 4, respectively, which cover synthesis methods, up-to-date sensing approaches and nonenzymatic hybrid sensors. Finally, we briefly outline the current status and future direction for carbon nanomaterials to be used in the sensing area.

Interfacial recognition of human prostate-specific antigen by immobilized monoclonal antibody: effects of solution conditions and surface chemistry.

The specific recognition between monoclonal antibody (anti-human prostate-specific antigen, anti-hPSA) and its antigen (human prostate-specific antigen, hPSA) has promising applications in prostate cancer diagnostics and other biosensor applications. However, because of steric constraints associated with interfacial packing and molecular orientations, the binding efficiency is often very low. In this study, spectroscopic ellipsometry and neutron reflection have been used to investigate how solution pH, salt concentration and surface chemistry affect antibody adsorption and subsequent antigen binding. The adsorbed amount of antibody was found to vary with pH and the maximum adsorption occurred between pH 5 and 6, close to the isoelectric point of the antibody. By contrast, the highest antigen binding efficiency occurred close to the neutral pH. Increasing the ionic strength reduced antibody adsorbed amount at the silica-water interface but had little effect on antigen binding. Further studies of antibody adsorption on hydrophobic C8 (octyltrimethoxysilane) surface and chemical attachment of antibody on (3-mercaptopropyl)trimethoxysilane/4-maleimidobutyric acid N-hydroxysuccinimide ester-modified surface have also been undertaken. It was found that on all surfaces studied, the antibody predominantly adopted the 'flat on' orientation, and antigen-binding capabilities were comparable. The results indicate that antibody immobilization via appropriate physical adsorption can replace elaborate interfacial molecular engineering involving complex covalent attachments.

ZnO-based FBAR resonators with carbon nanotube electrodes.

Film bulk acoustic resonator (FBAR) devices with carbon nanotube (CNT) electrodes directly grown on a ZnO film by thermal chemical vapor deposition have been fabricated. CNT electrodes possess a very low density and high acoustic impedance, which reduces the intrinsic mass loading effect resulting from the electrodes¿ weight and better confines the longitudinal acoustic standing waves inside the resonator, in turn providing a resonator with a higher quality factor. The influence of the CNTs on the frequency response of the FBAR devices was studied by comparing two identical sets of devices; one set comprised FBARs fabricated with chromium/ gold bilayer electrodes, and the second set comprised FBARs fabricated with CNT electrodes. It was found that the CNTs had a significant effect on attenuating traveling waves at the surface of the FBARs' membranes because of their high elastic stiffness. Three-dimensional finite element analysis of the devices fabricated was carried out, and the numerical simulations were consistent with the experimental results obtained.

Interfacial immobilization of monoclonal antibody and detection of human prostate-specific antigen.

Antibody orientation and its antigen binding efficiency at interface are of particular interest in many immunoassays and biosensor applications. In this paper, spectroscopic ellipsometry (SE), neutron reflection (NR), and dual polarization interferometry (DPI) have been used to investigate interfacial assembly of the antibody [mouse monoclonal anti-human prostate-specific antigen (anti-hPSA)] at the silicon oxide/water interface and subsequent antigen binding. It was found that the mass density of antibody adsorbed at the interface increased with solution concentration and adsorption time while the antigen binding efficiency showed a steady decline with increasing antibody amount at the interface over the concentration range studied. The amount of antigen bound to the interfacial immobilized antibody reached a maximum when the surface-adsorbed amount of antibody was around 1.5 mg/m(2). This phenomenon is well interpreted by the interfacial structural packing or crowding. NR revealed that the Y-shaped antibody laid flat on the interface at low surface mass density with a thickness around 40 Å, equivalent to the short axial length of the antibody molecule. The loose packing of the antibody within this range resulted in better antigen binding efficiency, while the subsequent increase of surface-adsorbed amount led to the crowding or overlapping of antibody fragments, hence reducing the antigen binding due to the steric hindrance. In situ studies of antigen binding by both NR and DPI demonstrated that the antigen inserted into the antibody layer rather than forming an additional layer on the top. Stability assaying revealed that the antibody immobilized at the silica surface remained stable and active over the monitoring period of 4 months. These results are useful in forming a general understanding of antibody interfacial behavior and particularly relevant to the control of their activity and stability in biosensor development.