Impact of UV Irradiation on the Chitosan Bioactivity for Biopesticide Applications.

Chitosan is known for its antimicrobial and antifungal properties that make it a promising candidate for plant protection. However, when sprayed in open fields, the bioactivity of chitosan significantly diminishes, suggesting a possible influence of sunlight on chitosan structure. This study aimed to investigate the effects of UV radiation, by using artificial UV sources simulating sunlight, on the stability of chitosan. A powdered chitosan with a low polymerization degree was selected and analyzed using various physicochemical methods, both before and after irradiation. Some minor differences appeared. UV spectra analysis revealed the disappearance of initially present chromophores and the emergence of a new band around 340 nm, potentially indicating the formation of carbonyl compounds. However, elemental analysis, MALDI-TOF spectra, polymerization degree, and infrared spectra did not exhibit any clear structural modifications of chitosan. Interestingly, irradiated powdered chitosan samples maintained their bioactivity, including their eliciting and antifungal properties. In the case of grapevine, irradiated chitosan demonstrated effectiveness in controlling grapevine diseases such as downy mildew, contradicting the assumption that sunlight is responsible for the decreased effectiveness of chitosan in open field conditions.

Deep Chemical and Physico-Chemical Characterization of Antifungal Industrial Chitosans-Biocontrol Applications.

Five different chitosan samples (CHI-1 to CHI-5) from crustacean shells with high deacetylation degrees (>93%) have been deeply characterized from a chemical and physicochemical point of view in order to better understand the impact of some parameters on the bioactivity against two pathogens frequently encountered in vineyards, Plasmopara viticola and Botrytis cinerea. All the samples were analyzed by SEC-MALS, 1H-NMR, elemental analysis, XPS, FTIR, mass spectrometry, pyrolysis, and TGA and their antioxidant activities were measured (DPPH method). Molecular weights were in the order: CHI-4 and CHI-5 (MW >50 kDa) > CHI-3 > CHI-2 and CHI-1 (MW < 20 kDa). CHI-1, CHI-2 and CHI-3 are under their hydrochloride form, CHI-4 and CHI-5 are under their NH2 form, and CHI-3 contains a high amount of a chitosan calcium complex. CHI-2 and CHI-3 showed higher scavenging activity than others. The bioactivity against B. cinerea was molecular weight dependent with an IC50 for CHI-1 = CHI-2 (13 mg/L) ≤ CHI-3 (17 mg/L) < CHI-4 (75 mg/L) < CHI-5 (152 mg/L). The bioactivity on P. viticola zoospores was important, even at a very low concentration for all chitosans (no moving spores between 1 and 0.01 g/L). These results show that even at low concentrations and under hydrochloride form, chitosan could be a good alternative to pesticides.

Polysaccharide Matrices for the Encapsulation of Tetrahydrocurcumin-Potential Application as Biopesticide against Fusarium graminearum.

Cereals are subject to contamination by pathogenic fungi, which damage grains and threaten public health with their mycotoxins. Fusarium graminearum and its mycotoxins, trichothecenes B (TCTBs), are especially targeted in this study. Recently, the increased public and political awareness concerning environmental issues tends to limit the use of traditional fungicides against these pathogens in favor of eco-friendlier alternatives. This study focuses on the development of biofungicides based on the encapsulation of a curcumin derivative, tetrahydrocurcumin (THC), in polysaccharide matrices. Starch octenylsuccinate (OSA-starch) and chitosan have been chosen since they are generally recognized as safe. THC has been successfully trapped into particles obtained through a spray-drying or freeze-drying processes. The particles present different properties, as revealed by visual observations and scanning electron microscopy. They are also different in terms of the amount and the release of encapsulated THC. Although freeze-dried OSA-starch has better trapped THC, it seems less able to protect the phenolic compound than spray-dried particles. Chitosan particles, both spray-dried and lyophilized, have shown promising antifungal properties. The IC50 of THC-loaded spray-dried chitosan particles is as low as 0.6 ± 0.3 g/L. These particles have also significantly decreased the accumulation of TCTBs by 39%.

HbIDI, SlIDI and EcIDI: A comparative study of isopentenyl diphosphate isomerase activity and structure.

In this study, we cloned, expressed and purified the isopentenyl diphosphate isomerases (IDIs) from two plants, Hevea brasiliensis and Solanum lycopersicum, and compared them to the already well characterized Escherichia coli IDI. Phylogenetic analysis showed high homology between the three enzymes. Their catalytic activity was investigated in vitro with recombinant purified enzymes and in vivo by complementation colorimetric tests. The three enzymes displayed consistent activities both in vitro and in vivo. In term of structure, studied by ATR-FTIR and molecular modeling, it is clear that both plant enzymes are more related to their human homologue than to E. coli IDI. But it is assumed that EcIDI represent the minimalistic part of the catalytic core, as both plant enzymes present a supplementary sequence forming an extra α-helice surrounding the catalytic site that could facilitate the biocatalysis. New potential biotechnological applications may be envisaged.

Active naringin-chitosan films: impact of UV irradiation.

Bioactive citrus extract-chitosan films were prepared through solvent casting-evaporation method. The impact of near UV irradiation was studied to reach a better understanding of the film behavior. The antimicrobial activity of films against Listeria innocua was maintained after UV irradiation. To study the interaction between chitosan and citrus extract components, naringin (main component) was selected as the model compound. UV treatment caused modifications of the flavanone regardless of the solvent used for its dissolution, depending on the concentration of naringin in the film: the greater the concentration the lower the modification. DSC results suggested cross-links due to UV irradiation and interactions between naringin and chitosan. This was confirmed by a decrease in the naringin release from the irradiated samples. Naringin- and citrus extract-chitosan films showed an increased absorbance in the UV region compared to pure chitosan films, showing potentiality for decreasing the lipid oxidation induced by UV light in foodstuffs.

Unexpected dimerization of isoprene in a gas chromatography inlet. A study by gas chromatography/mass spectrometry coupling.

During analysis of pure isoprene by gas chromatography/mass spectrometry (GC-MS) using a programmed temperature vaporization (PTV) inlet, the presence of several isoprene dimers was detected in the total ion chromatograms (TICs). This study intends to determine the part of the instrument where dimerization occurs and the relative importance of the dimer amounts under different experimental conditions. The reference thermal dimerization of isoprene gives four six-membered cyclic dimers and two eight-membered ones. In all samples containing different amounts of freshly distilled isoprene, only peaks corresponding to the former appeared in TICs. For the same temperature, their amounts increase as the concentration of injected isoprene increases. The main products are diprene (from 80 to 100%) of the total dimers and dipentene (from 1 to 14%). The sum of the two other dimers is never higher than 6%. In conclusion, isomeric dimers are produced through a dimerization in the inlet. No dimerization of isoprene occurs in the mass spectrometer source. Then care is needed when analyzing terpenic compounds in the presence of isoprene by GC-MS because structures, retention times and mass spectra of diprene and dipentene are close.

Styrene-spaced copolymers including anthraquinone and ß-O-4 lignin model units: synthesis, characterization and reactivity under alkaline pulping conditions.

A series of random copoly(styrene)s has been synthesized via radical polymerization of functionalized anthraquinone (AQ) and ß-O-4 lignin model monomers. The copolymers were designed to have a different number of styrene spacer groups between the AQ and ß-O-4 lignin side chains aiming at investigating the distance effects on AQ/ß-O-4 electron transfer mechanisms. A detailed molecular characterization, including techniques such as size exclusion chromatography, MALDI-TOF mass spectrometry, and (1)H, (13)C, (31)P NMR and UV-vis spectroscopies, afforded quantitative information about the composition of the copolymers as well as the average distribution of the AQ and ß-O-4 groups in the macromolecular structures. TGA and DSC thermal analysis have indicated that the copolymers were thermally stable under regular pulping conditions, revealing the inertness of the styrene polymer backbone in the investigation of electron transfer mechanisms. Alkaline pulping experiments showed that close contact between the redox active side chains in the copolymers was fundamental for an efficient degradation of the ß-O-4 lignin model units, highlighting the importance of electron transfer reactions in the lignin degradation mechanisms catalyzed by AQ. In the absence of glucose, AQ units oxidized phenolic ß-O-4 lignin model parts, mainly by electron transfer leading to vanillin as major product. By contrast, in presence of glucose, anthrahydroquinone units (formed by reduction of AQ) reduced the quinone-methide units (issued by dehydration of phenolic ß-O-4 lignin model part) mainly by electron transfer leading to guaiacol as major product. Both processes were distance dependent.

Unexpected matrix interactions in liquid secondary ion mass spectrometry of two pyranosyl mercaptans.

An unexpected interaction with a thioglycerol matrix appeared in the liquid secondary ion mass spectrometry (LSIMS) spectra of two pyranosyl mercaptans [2,3,4,6-tetra-O-acetyl-1-thio-ß-D-glucopyranose (1a) and 2,3,4,6-tetra-O-acetyl-1,5-dithio-ß-D-glucopyranose (1b)] often used to prepare glucosinolates, important thiosaccharidic metabolites found in all plants of the order Brassicales. The reactions, probably occurring in the solvent cage, seem to involve radical mechanisms.

In vitro inhibitory effect of tetrahydrocurcuminoids on Fusarium proliferatum growth and fumonisin B1 biosynthesis.

Many plant pathogens produce toxic metabolites when growing on food and feed. Some antioxidative components seem to prevent fungal growth and mycotoxin formation. Recently, we synthesized a new class of powerful antioxidative compounds, i.e. tetrahydrocurcuminoids, and its structure/antioxidant activity relationships have been established. The South West of France produces large amounts of corn, which can be infected by Fusarium species, particularly F. proliferatum. In this context, the efficiency of tetrahydrocurcuminoids, which can be obtained from natural curcuminoids, was investigated to control in vitro the growth of F. proliferatum and the production of its associated mycotoxin, fumonisin B1. The relation between structure and antifungal activity was studied. Tetrahydrocurcumin (THC1), with two guaiacyl phenolic subunits, showed the highest inhibitory activity (measured as radial growth on agar medium) against the F. proliferatum development (67% inhibition at a concentration of 13.6 µmol ml⁻¹). The efficiencies of THC2 (36% at a concentration of 11.5 µmol ml⁻¹), which contains syringyl phenolic units, and THC3 (30% at a concentration of 13.6 µmol ml⁻¹), which does not have any substituent on the aromatic rings, were relatively close. These results indicate that the simultaneous presence of guaiacyl phenols and the enolic function of the ß-diketone moiety play an important role in the inhibition mechanisms. The importance of this combination was confirmed using n-propylguaiacol and acetylacetone as molecular models. Under the same conditions, ferulic acid and eugenol, other natural phenolic antioxidants, were less efficient in inhibiting fungal growth. THC1 also reduced fumonisin B1 production in liquid medium by approximately 35, 50 and 75% at concentrations of 0.8, 1.3, and 1.9 µmol ml⁻¹, respectively. These very low inhibitory concentrations show that tetrahydrocurcuminoids could be one of the most promising biobased molecules for the control of mycotoxinogen fungal strains.

Valorization of an industrial organosolv-sugarcane bagasse lignin: Characterization and use as a matrix in biobased composites reinforced with sisal fibers.

In the present study, the main focus was the characterization and application of the by-product lignin isolated through an industrial organosolv acid hydrolysis process from sugarcane bagasse, aiming at the production of bioethanol. The sugarcane lignin was characterized and used to prepare phenolic-type resins. The analysis confirmed that the industrial sugarcane lignin is of HGS type, with a high proportion of the less substituted aromatic ring p-hydroxyphenyl units, which favors further reaction with formaldehyde. The lignin-formaldehyde resins were used to produce biobased composites reinforced with different proportions of randomly distributed sisal fibers. The presence of lignin moieties in both the fiber and matrix increases their mutual affinity, as confirmed by SEM images, which showed good adhesion at the biocomposite fiber/matrix interface. This in turn allowed good load transference from the matrix to the fiber, leading to biobased composites with good impact strength (near 500 J m(-1) for a 40 wt% sisal fiber-reinforced composite). The study demonstrates that sugarcane bagasse lignin obtained from a bioethanol plant can be used without excessive purification in the preparation of lignocellulosic fiber-reinforced biobased composites displaying high mechanical properties.

Biobased composites from glyoxal-phenolic resins and sisal fibers.

Lignocellulosic materials can significantly contribute to the development of biobased composites. In this work, glyoxal-phenolic resins for composites were prepared using glyoxal, which is a dialdehyde obtained from several natural resources. The resins were characterized by (1)H, (13)C, 2D, and (31)P NMR spectroscopies. Resorcinol (10%) was used as an accelerator for curing the glyoxal-phenol resins in order to obtain the thermosets. The impact-strength measurement showed that regardless of the cure cycle used, the reinforcement of thermosets by 30% (w/w) sisal fibers improved the impact strength by one order of magnitude. Curing with cycle 1 (150 degrees C) induced a high diffusion coefficient for water absorption in composites, due to less interaction between the sisal fibers and water. The composites cured with cycle 2 (180 degrees C) had less glyoxal resin coverage of the cellulosic fibers, as observed by images of the fractured interface observed by SEM. This study shows that biobased composites with good properties can be prepared using a high proportion of materials obtained from natural resources.

Sisal fibers: surface chemical modification using reagent obtained from a renewable source; characterization of hemicellulose and lignin as model study.

Sisal fibers have one of the greatest potentials among other lignocellulosic fibers to reinforce polymer matrices in composites. Sisal fibers have been modified to improve their compatibility with phenolic polymer matrices using furfuryl alcohol (FA) and polyfurfuryl alcohols (PFA) that can be obtained from renewable sources. The modification corresponded first to oxidation with ClO 2, which reacts mainly with guaiacyl and syringyl units of lignin, generating o- and p-quinones and muconic derivatives, followed by reaction with FA or PFA. The FA and PFA modified fibers presented a thin similar layer, indicating the polymer character of the coating. The untreated and treated sisal fibers were characterized by (13)C CP-MAS NMR spectrometry, thermal analysis, and scanning electron microscopy. Furthermore, for a better understanding of the reactions involved in the FA and PFA modifications, the sisal lignin previously extracted was also submitted to those reactions and characterized. The characterization of isolated lignin and hemicellulose provides some information on the chemical structure of the main constitutive macrocomponents of sisal fibers, such information being scarce in the literature.

Renewable resources as reinforcement of polymeric matrices: composites based on phenolic thermosets and chemically modified sisal fibers.

Lignocellulosic materials can significantly contribute to the development of composites, since it is possible to chemically and/or physically modify their main components, cellulose, hemicelluloses and lignin. This may result in materials more stable and with more uniform properties. It has previously been shown that chemically modified sisal fibers by ClO(2) oxidation and reaction with FA and PFA presented a thin coating layer of PFA on their surface. FA and PFA were chosen as reagents because these alcohols can be obtained from renewable sources. In the present work, the effects of the polymeric coating layer as coupling agent in phenolic/sisal fibers composites were studied. For a more detailed characterization of the fibers, IGC was used to evaluate the changes that occurred at the sisal fibers surface after the chemical modifications. The dispersive and acid-base properties of untreated and treated sisal fibers surfaces were determined. Biodegradation experiments were also carried out. In a complementary study, another PFA modification was made on sisal fibers, using K2Cr2O(7) as oxidizing agent. In this case the oxidation effects involve mainly the cellulose polymer instead of lignin, as observed when the oxidation was carried out with ClO(2). The SEM images showed that the oxidation of sisal fibers followed by reaction with FA or PFA favored the fiber/phenolic matrix interaction at the interface. However, because the fibers were partially degraded by the chemical treatment, the impact strength of the sisal-reinforced composites decreased. By contrast, the chemical modification of fibers led to an increase of the water diffusion coefficient and to a decrease of the water absorption of the composites reinforced with modified fibers. The latter property is very important for certain applications, such as in the automotive industry.

Studies on the photochemistry of 1,7-diphenyl-1,6-heptadiene-3,5-dione, a non-phenolic curcuminoid model.

The comparative photostability of curcumin 1, and two non-phenolic curcuminoids: 1,7-diphenyl-1,6-heptadiene-3,5-dione 2 (unsubstituted curcumin) and dimethylcurcumin 3 in non-degassed dilute solutions (approximately 3-5 x 10(-5) mol l(-1)) has been established by UV-visible absorption spectroscopy; disappearance quantum yields were measured. The similar behavior of the three studied curcuminoids is indicative of only a moderate role of phenol groups in the photodegradation process. Structural analysis of the photodegradation products of compound 2 in more concentrated solution (approximately 3.6 x 10(-3) mol l(-1)) shows formation of benzaldehyde, cinnamaldehyde, 2'-hydroxy-5',6'-benzochalcone 4, flavanone 5 and some other unidentified photoproducts. Flavanone 5 is formed by irradiation of chalcone 4. It represents a unique example of photochemical conversion of a diarylheptanoid molecule into a flavonoid, another very important class of natural products.