The versatile Co2+/Co3+ oxidation states in cobalt alumina spinel: how to design strong blue nanometric pigments for color electrophoretic display.

Blue cobalt inorganic pigments with spinel-type structure have been revisited in order to understand the origin of blackening at low temperatures and to design strong blue nanosized materials. Starting from a sol-gel process, the so-called Pechini route, the correlation between the structural features (inversion rate, Co over-stoichiometry, Co valence states) of the spinel network and its thermal history under air up to high temperatures (T = 1400 °C) allows concluding that the stabilization of CoIII in octahedral sites is at the origin of the blackening of the pigment annealed at low and medium temperatures. EELS coupled with TEM analyses (occurrence of multiple phases with various Al/Co atomic ratios) lead to us to conclude definitively about the variation of Co valence states. A top-down (mechanical grinding) and a bottom-up approach lead to the definition of a synthesis route (co-precipitation in basic medium followed by annealing at medium temperatures under Ar) allowing the design of strong blue pure nano-sized pigments to be incorporated in inks. Hybrid blue positively charged particles were mixed with white negatively charged particles to formulate dual-colour inks. A dual-colour display was filled with the as-prepared inks and tested under ±150 V.

Co(1-x)Mg(x)MoO4 compounds for pressure indicators.

Two Co(1-x)Mg(x)MoO(4) oxide compositions (x=0 and x=0.4) were investigated as potential pressure indicators. The first order phase half-transition induced by pressure application from the ß to the α form, i.e. from the high temperature/low pressure form to the high pressure/low temperature form, was studied thanks to the powder diffuse reflection (color) evolution versus the applied pressure. Three key parameters were analyzed: (i) the magnesium content, (ii) the powder grain sizes, (iii) the pressure application mode (uniaxial or isostatical). It was shown these three parameters allow tuning the transition pressure in a wide range from few bars to few kbars.

Investigation of the first-order phase transition in the Co(1-x)Mg(x)MoO4 solid solution and discussion of the associated thermochromic behavior.

A series of compounds of Co(1-x)Mg(x)MoO(4) compositions has been prepared by a conventional ceramic route. The members of the whole solid solution exhibit a reversible first-order phase transition which was probed by using thermal expansion and low-temperature reflectivity techniques. Whereas the α → ß transition temperature evolves linearly on warming from 435 to 200 °C with x going from 0 to 0.9, the ß â†’ α transition temperature variation falls down on cooling from -40 °C to -140 °C going from CoMoO(4) to Co(0.1)Mg(0.9)MoO(4) with an asymptotic evolution. The phase transition temperatures have been explained on the basis of a crystal polarization effect under substitution of Mg for Co. Thus, from an applicative point of view, new thermochromic pigments with tunable transition temperatures are here proposed.

Synthesis temperature effect on the structural features and optical absorption of Zn(1-x)Co(x)Al2O4 oxides.

Zinc/cobalt aluminates with spinel-type structure were prepared by a polymeric route, leading to a pure phase with controlled grain size. The prepared pigments were characterized by powder X-ray diffraction Rietveld analyses in order to determine structural features, scanning electron microscopy for morphological investigation, helium pycnometry and (27)Al MAS NMR in order to highlight the occurrence of defects inside the structure, and UV-visible-near-IR spectroscopy to identify electronic transitions responsible for the compounds' color. The green-blue coloration of these pigments is known to be dependent on the sample thermal history. Here, for the first time, the Zn(1-x)Co(x)Al(2)O(4) color is newly interpreted. The pigment is green once synthesized at low temperature (i.e., with diminution of the pigment grain size); this variation was attributed to the appearance of a new absorption band located at about 500 nm, linked to a complex network feature involving Co ions in octahedral sites as well as oxygen and cationic vacancies. Hence, this work shows the possibility of easily getting a nonstoichiometric network with an abnormal cationic distribution from "chimie douce" processes with moderate synthesis temperature, and so various colorations for the same composition.

Thermochromic phase transition on CuMo0.9W0.1O4@SiO2 core-shell particles.

The thermochromic phase transition of CuMo(1-x)W(x)O(4) oxide was delayed by the deposit of SiO(2) shells. The phase transition temperature was investigated by optical reflectivity versus temperature. The effect of the shell thickness on the transition temperature is established. The cyclability of the phenomenon is also discussed.

Characterization of the piezochromic behavior of some members of the CuMo1-xWxO4 series.

The members of the CuMo(1- x)WxO4 series (0 < or = x < 0.1) undergo a first-order phase transition that can be induced by pressure application; the thermochromic properties of such a series have already been reported. The two polymorphic forms exhibit two distinguishable colors: green for the low pressure form (alpha) and brownish-red for the high pressure one (gamma). These oxides can open up a new market for friendly pressure indicators, particularly for the compositions (0.07 < or = x < or = 0.1) for which the two polymorphs are stable at room temperature, that is, for which the color transition via pressure application is nonreversible. Within the CuMo(1- x)WxO4 solid solution domain, the dependence of the transition pressure versus tungsten content, temperature of measurement, and sample thermal-pressure history was studied. A large control of the transition pressure (from 5 to several 100 MPa) was brought to the fore. The transition was then studied using X-ray diffraction and transmission electron microscopy-energy dispersive X-ray analyses. This first-order transition, occurring by atomic migration inside the cell, seems to be preceded by an atomic disordering; moreover, transition temperatures may be modified by W segregation at the surface of the grains.

Green coloration of Co-doped ZnO explained from structural refinement and bond considerations.

ZnO doped with Co2+ has been prepared by a Pechini process and investigated in terms of crystallographic structure and UV-visible properties. We emphasize for the first time a splitting of the ZnO band gap in two "sub-band gaps" (never clearly mentioned until now) which is fully interpreted basing on the iono-covalent nature of the O-Zn bonds. An anticipative approach of the potential structure relaxations was discussed from exchanged effective charge per bond calculated with the purely ionic Brown and Altermatt model.

Adaptable thermochromism in the CuMo1-xWxO4 series (0

The members of the CuMo1-xWxO4 series (0alpha transition can occur between 260 and 360 K, and the alpha-->gamma transition between 175 and 275 K as a function of x. The control of the alpha/gamma transition temperatures with x is related to the larger propensity of tungsten compared to molybdenum, to adopt a tetrahedral environment.

Steric and electronic effects relating to the Cu2+ Jahn-Teller distortion in Zn(1-)xCuxAl2O4 spinels.

Zn1-xCuxAl2O4 (0

[Effects of propofol on intraocular pressure in surgery of strabismus in children]. / Effets du propofol sur la pression intraoculaire dans la chirurgie du strabisme de l'enfant.

Propofol was assessed for eye surgery in 20 children. ASA group I or II, 2-14 year-old, randomly assigned to 2 equal groups. Premedication, analgesia and muscle paralysis were similar in both groups. Group P patients were given an induction dose of 4 mg.kg-1 propofol, followed by an infusion of 15 mg.kg-1.h-1 for the first half hour, and then 10 mg.kg-1.h-1 to maintain anaesthesia. Group C patients were given 10 mg.kg-1 thiopentone for induction and halothane for maintenance. The quality of anaesthesia was assessed by monitoring adverse effects, heart rate, blood pressure, the length of anaesthesia, the delay of the first spontaneous breath and eye opening, and extubation. Intraocular pressure was measured before and 3 min after intubation, and 5 min after extubation. The quality of anaesthetic induction and maintenance were very similar in both groups. Pain occurred more frequently at the injection site with propofol (p less than 0.01). Children in group P recovered more quickly, and extubation was possible much earlier in this group (p less than 0.05). However, restlessness was significantly more frequent in group P (n = 9) than in group C (n = 1) (p less than 0.01). Systolic, diastolic blood pressure and heart rate were significantly lower in group P (p less than 0.05; 0.001; 0.001 respectively). No significant decrease in intraocular pressure in both groups was observed. The use of propofol for eye surgery in children is acceptable, despite some restlessness during recovery.

[Hypovolemic shock caused by an increase in capillary permeability after cesarean section]. / Choc hypovolémique par augmentation de la perméabilité capillaire après césarienne.

A 24 year old woman was delivered by caesarean section after an uncomplicated full-term pregnancy. Non-specific prodromes appeared 48 h later, with development of a severe shock. After confirmation of hypovolaemia, attention was focused on the abnormal haematological findings (a sharp drop in serum proteins with a rise in haematocrit) which suggested major leakage of plasma. Treatment based on infusions of plasma and albumin failed, and the patient died in a state of anasarca and pulmonary oedema with normal wedge pressure. 18 similar cases have already been published, six of which were in obstetric or surgical patients. After analysing the prodromes and its onset, its pathophysiological mechanisms and treatment are discussed.