A three-dimensional carbon nanotube network for water treatment.

The bulk synthesis of freestanding carbon nanotube (CNT) frameworks is developed through a sulfur-addition strategy during an ambient-pressure chemical vapour deposition process, with ferrocene used as the catalyst precursor. This approach enhances the CNTs' length and contorted morphology, which are the key features leading to the formation of the synthesized porous networks. We demonstrate that such a three-dimensional structure selectively uptakes from water a mass of toxic organic solvent (i.e. o-dichlorobenzene) about 3.5 times higher than that absorbed by individual CNTs. In addition, owing to the presence of highly defective nanostructures constituting them, our samples exhibit an oil-absorption capacity higher than that reported in the literature for similar CNT sponges.

Growth control, structure, chemical state, and photoresponse of CuO-CdS core-shell heterostructure nanowires.

The growth of single-crystal CuO nanowires by thermal annealing of copper thin films in air is studied. We show that the density, length, and diameter of the nanowires can be controlled by tuning the morphology and structure of the copper thin films deposited by DC magnetron sputtering. After identifying the optimal conditions for the growth of CuO nanowires, chemical bath deposition is employed to coat the CuO nanowires with CdS in order to form p-n nanojunction arrays. As revealed by high-resolution TEM analysis, the thickness of the polycrystalline CdS shell increases when decreasing the diameter of the CuO core for a given time of CdS deposition. Near-edge x-ray absorption fine-structure spectroscopy combined with transmission x-ray microscopy allows the chemical analysis of isolated nanowires. The absence of modification in the spectra at the Cu L and O K edges after the deposition of CdS on the CuO nanowires indicates that neither Cd nor S diffuse into the CuO phase. We further demonstrate that the core-shell nanowires exhibit the I-V characteristic of a resistor instead of a diode. The electrical behavior of the device was found to be photosensitive, since increasing the incident light intensity induces an increase in the collected electrical current.

Fabrication of a nickel nanowire mesh electrode suspended on polymer substrate.

We report on an efficient strategy for the fabrication of an ultra-long suspended nanowire mesh suitable for nanodevice architectures on a polymer surface. First, nickel nanowires are synthesized directly on a template substrate by magnetron sputtering. Laser interference lithography followed by deep reactive ion etching is used to create the nanograted template substrate constituted of one-dimensional line pattern arrays of 240 nm in periodicity. Ordered alignment of ultra-long nanowires (∼180 nm in diameter) with high fidelity to the template pattern is observed by scanning electron microscopy. The transfer of the pre-defined parallel nanowire array from the template surface to a target polymer substrate for electrical characterization of the system is demonstrated. The electrical behaviour of the nanowire mesh, suspended between two electrodes, was found to be linear, stable, and reproducible. This result suggests that this nanofabrication process will open an efficient way to the design and construction of novel nanodevices.

Hierarchical carbon nanostructure design: ultra-long carbon nanofibers decorated with carbon nanotubes.

Hierarchical carbon nanostructures based on ultra-long carbon nanofibers (CNF) decorated with carbon nanotubes (CNT) have been prepared using plasma processes. The nickel/carbon composite nanofibers, used as a support for the growth of CNT, were deposited on nanopatterned silicon substrate by a hybrid plasma process, combining magnetron sputtering and plasma-enhanced chemical vapor deposition (PECVD). Transmission electron microscopy revealed the presence of spherical nanoparticles randomly dispersed within the carbon nanofibers. The nickel nanoparticles have been used as a catalyst to initiate the growth of CNT by PECVD at 600°C. After the growth of CNT onto the ultra-long CNF, SEM imaging revealed the formation of hierarchical carbon nanostructures which consist of CNF sheathed with CNTs. Furthermore, we demonstrate that reducing the growth temperature of CNT to less than 500°C leads to the formation of carbon nanowalls on the CNF instead of CNT. This simple fabrication method allows an easy preparation of hierarchical carbon nanostructures over a large surface area, as well as a simple manipulation of such material in order to integrate it into nanodevices.

Titanium carbide/carbon composite nanofibers prepared by a plasma process.

The incorporation of metal or metal carbide nanoparticles into carbon nanofibers modifies their properties and enlarges their field of application. The purpose of this work is to report a new non-catalytic and easy method to prepare organized metal carbide-carbon composite nanofibers on nanopatterned silicon substrates prepared by laser interference lithography coupled with deep reactive ion etching. Titanium carbide-carbon composite nanofibers were grown on the top of the silicon lines parallel to the substrate by a hybrid plasma process combining physical vapor deposition and plasma enhanced chemical vapor deposition. The prepared nanofibers were analyzed by scanning electron microscopy, x-ray photoelectron spectroscopy, Raman spectroscopy and transmission electron microscopy. We demonstrate that the shape, microstructure and the chemical composition of the as-grown nanofibers can be tuned by changing the plasma conditions.

Hepatotoxicity associated with the use of a fixed combination of chloroquine and proguanil.

Here we report on a case of hepatotoxicity associated with the use of a fixed combination of chloroquine and proguanil. Alternative causes of liver injury were excluded. The pathophysiological mechanism remains unclear, with a possibility of allergic reaction. In view of the widespread use of both drugs, clinicians should be aware of this drug-induced liver injury.