Catalytic hydrogenation of nitrate in water: improvement of the activity and selectivity to N2 by using Rh(III)-hexamolybdate supported on ZrO2-Al2O3.

Catalysts prepared on ZrO2, Al2O3 and ZrO2-Al2O3 (ZrAl-10) supported with Anderson heteropolyanion (RhMo6) as active phase were investigated for the elimination of NO3- from water. Raman characterization of pure and supported RhMo6 phase showed the presence of polymolybdic species of different degrees of complexity when RhMo6 was supported. The temperature-programmed reduction study revealed the synergic effect between Rh and Mo species, through which the reducibility of Mo was promoted by Rh, and different phase/support interactions were verified. Among the supports, ZrAl-10 presented the highest acidity due to the presence of ZrO2 in the tetragonal modification and high specific surface area (due to Al2O3), favouring rhodium-molybdenum active phase/support interaction and high dispersion. All catalysts prepared were active in removing NO3-, the one prepared with the RhMo6 phase on the ZrAl-10 support being the most active. These results point to the formation of an active surface with a high dispersion of Rh and Mo. The highest selectivity to N2 (99.3) exhibited by the RhMo6/ZrAl-10 catalyst is proposed to be related to the high Rh dispersion (0.755) and to the presence of Lewis acid sites (oxygen vacancies) of the tetragonal ZrO2 modification that favour NO3- adsorption through electrostatic interactions.

Synthesis of Dimethyl Carbonate by Transesterification of Propylene Carbonate with Methanol on CeO2-La2O3 Oxides Prepared by the Soft Template Method.

In this study, CeO2, La2O3, and CeO2-La2O3 mixed oxide catalysts with different Ce/La molar ratios were prepared by the soft template method and characterized by different techniques, including inductively coupled plasma atomic emission spectrometry, X-ray diffraction, N2 physisorption, thermogravimetric analysis, and Raman and Fourier transform infrared spectroscopies. NH3 and CO2 adsorption microcalorimetry was also used for assessing the acid and base surface properties, respectively. The behavior of the oxides as catalysts for the dimethyl carbonate synthesis by the transesterification of propylene carbonate with methanol, at 160 °C under autogenic pressure, was studied in a stainless-steel batch reactor. The activity of the catalysts was found to increase with an increase in the basic sites density. The formation of dimethyl carbonate was favored on medium-strength and weak basic sites, while it underwent decomposition on the strong ones. Several parasitic reactions occurred during the transformation of propylene carbonate, depending on the basic and acidic features of the catalysts. A reaction pathway has been proposed on the basis of the components identified in the reaction mixture.

Oscillatory Behaviour of Ni Supported on ZrO2 in the Catalytic Partial Oxidation of Methane as Determined by Activation Procedure.

Ni/ZrO2 catalysts, active and selective for the catalytic partial oxidation of methane to syngas (CH4-CPO), were prepared by the dry impregnation of zirconium oxyhydroxide (Zhy) or monoclinic ZrO2 (Zm), calcination at 1173 K and activation by different procedures: oxidation-reduction (ox-red) or direct reduction (red). The characterization included XRD, FESEM, in situ FTIR and Raman spectroscopies, TPR, and specific surface area measurements. Catalytic activity experiments were carried out in a flow apparatus with a mixture of CH4:O2 = 2:1 in a short contact time. Compared to Zm, Zhy favoured the formation of smaller NiO particles, implying a higher number of Ni sites strongly interacting with the support. In all the activated Ni/ZrO2 catalysts, the Ni-ZrO2 interaction was strong enough to limit Ni aggregation during the catalytic runs. The catalytic activity depended on the activation procedures; the ox-red treatment yielded very active and stable catalysts, whereas the red treatment yielded catalysts with oscillating activity, ascribed to the formation of Niδ+ carbide-like species. The results suggested that Ni dispersion was not the main factor affecting the activity, and that active sites for CH4-CPO could be Ni species at the boundary of the metal particles in a specific configuration and nuclearity.

High temperature stability of onion-like carbon vs highly oriented pyrolytic graphite.

The thermodynamic stability of onion-like carbon (OLC) nanostructures with respect to highly oriented pyrolytic graphite (HOPG) was determined in the interval 765-1030 K by the electromotive force (emf) measurements of solid electrolyte galvanic cell: (Low) Pt|Cr3C2,CrF2,OLC|CaF2s.c.|Cr3C2,CrF2,HOPG|Pt (High). The free energy change of transformation HOPG = OLC was found positive below 920.6 K crossing the zero value at this temperature. Its trend with temperature was well described by a 3rd degree polynomial. The unexpected too high values of [Formula: see text] jointly to the HR-TEM, STEM and EELS evidences that showed OLC completely embedded in rigid cages made of a Cr3C2/CrF2 matrix, suggested that carbon in the electrodes experienced different internal pressures. This was confirmed by the evaluation under constant volume of [dP/dT by the α/κ ratio for OLC (0.5 MPa K(-1)) and HOPG (8 Pa K(-1)) where α and κ are the isobaric thermal expansion and isothermal compressibility coefficients, respectively. The temperature dependency of the pressure was derived and utilized to calculate the enthalpy and entropy changes as function of temperature and pressure. The highest value of the internal pressure experienced by OLC was calculated to be about 7 GPa at the highest temperature. At 920.6 K, ΔrH and ΔrS values are 95.8 kJ mol(-1) and 104.1 JK(-1) mol(-1), respectively. The surface contributions to the energetic of the system were evaluated and they were found negligible compared with the bulk terms. As a consequence of the high internal pressure, the values of the enthalpy and entropy changes were mainly attributed to the formation of carbon defects in OLC considered as multishell fullerenes. The change of the carbon defect fraction is reported as a function of temperature.

Preparation and Characterization of Nanocomposite Polymer Membranes Containing Functionalized SnO2 Additives.

In the research of new nanocomposite proton-conducting membranes, SnO2 ceramic powders with surface functionalization have been synthesized and adopted as additives in Nafion-based polymer systems. Different synthetic routes have been explored to obtain suitable, nanometer-sized sulphated tin oxide particles. Structural and morphological characteristics, as well as surface and bulk properties of the obtained oxide powders, have been determined by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier Transform Infrared (FTIR) and Raman spectroscopies, N2 adsorption, and thermal gravimetric analysis (TGA). In addition, dynamic mechanical analysis (DMA), atomic force microscopy (AFM), thermal investigations, water uptake (WU) measurements, and ionic exchange capacity (IEC) tests have been used as characterization tools for the nanocomposite membranes. The nature of the tin oxide precursor, as well as the synthesis procedure, were found to play an important role in determining the morphology and the particle size distribution of the ceramic powder, this affecting the effective functionalization of the oxides. The incorporation of such particles, having sulphate groups on their surface, altered some peculiar properties of the resulting composite membrane, such as water content, thermo-mechanical, and morphological characteristics.

Characterization of carbon nanotube dispersions in solutions of bile salts and derivatives containing aromatic substituents.

Bile salts (BS) are known to solubilize high weight fractions of carbon nanotubes (CNTs) in aqueous solutions. Here, the efficiency of derivatives of bile salts (BSDs) containing aromatic substituents in dispersing single-wall CNTs (SWCNTs) has been investigated in order to check whether the presence of aromatic residues, because of their affinity toward carbon nanotube surfaces, determines improvements of the BS dispersion efficiency (DE). Electric arc and CoMoCAT SWCNTs were analyzed. The results, reported for the two surfactant concentrations of 0.06 and 1.0 wt %, show that the DE of BSDs depends on the position, orientation, and structure of the introduced aromatic residues. In the case of the CoMoCAT SWCNTs, at low surfactant concentration a DE improvement is observed in BSDs where the aromatic residue is linked either to carbon 3, located on the rigid four-ring system, or to the side chain. For the latter, this improvement is also enhanced in double-charge derivatives and kept at high surfactant concentration. It was also observed that at low concentrations of surfactant, the DE values of BSs and BSDs are usually larger than those of the more conventional detergent sodium dodecylsulfate.

Lysozyme binds onto functionalized carbon nanotubes.

Single walled carbon nanotubes have singular physicochemical properties making them attractive in a wide range of applications. Studies on carbon nanotubes and biological macromolecules exist in literature. However, ad hoc investigations are helpful to better understand the interaction mechanisms. We report on a system consisting of single walled carbon nanotubes and lysozyme. The phenomenology of nanotube-protein interactions and its effects on protein conformation were determined. We investigated the formation of oxidized nanotube-lysozyme conjugates, by studying the effect of both protein concentration and pH. Electrophoretic mobility, dielectric spectroscopy and dynamic light scattering were used to determine the interaction pathways, monitoring the surface charge density and the size of the complexes. The results allowed identifying the conditions of surface saturation at different pH values. The secondary structure of nanotube-adsorbed protein was controlled by circular dichroism; it was observed that it substantially retains its native conformation. Interestingly, we found that the interactions among oxidized nanotubes and lysozyme molecules are mainly of electrostatic nature and easily tunable by varying the pH of the solutions.

Modifications induced by pretreatments on Au/SBA-15 and their influence on the catalytic activity for low temperature CO oxidation.

SBA-15 functionalization with mercaptopropyltrimethoxysilane has been used to prepare supported gold catalysts for the low temperature CO oxidation reaction. Supports and catalysts have been characterized by chemical analysis, CHS analysis, XRD, TGA, nitrogen adsorption-desorption at 77 K, TEM, CPMAS NMR, XPS and EPR. Catalytic runs have been carried out at atmospheric pressure and 313-623 K and the influence of diverse thermal treatments of the samples prior to reaction has been investigated. The presence of organic residues and the size of the gold nanoparticles strongly affect catalytic activity. Only high-temperature calcination in air followed by treatment under H2 atmosphere leads to active catalysts. After complete elimination of the functionalizing agent, caused by the calcination step, a gold-mediated "activation" process of the silica support takes place during the hydrogen treatment. As a consequence, active catalysts for the low temperature CO oxidation are obtained, even though the size of the Au particles is too large for establishing direct Au-oxygen interactions, usually assumed to be essential for the reaction over silica-supported gold catalysts.