ABSTRACT
A simple method to convert readily available carboxylic acids into sulfinate salts by employing an interrupted Barton decarboxylation reaction is reported. A medicinally oriented panel of ten new sulfinate reagents was created using this method, including a key trifluoromethylcyclopropanation reagent, TFCS-Na. The reactivity of six of these salts towards C-H functionalization was field-tested using several different classes of heterocycles.
Subject(s)
Sulfinic Acids/chemistry , Sulfinic Acids/chemical synthesis , Acids, Heterocyclic , Catalysis , Models, Molecular , Molecular StructureABSTRACT
Covalent attachment of a non-fluorinated polyetherimide onto the surface of carboxylic acid-functionalized multiwalled carbon nanotubes (MWNTs) has been achieved via grafting reactions. This confirms for the first time that the grafting reaction occurs at the nanotube surface when the carboxylic acid-functionalized MWNTs react with the polyetherimide with amine-terminated groups, through both amide and imide linkages formed at the interface between the carbon nanotubes and the polyetherimide. Additionally, an increase in the average molecular weight is detected in gel permeation chromatography when the polyetherimide is chemically attached onto the nanotubes. More interestingly, the chemical bonding at the interface provides much better interfacial adhesion and mechanical stress transfer, evidenced by a significant improvement in mechanical properties. As a result of the chemical attachment, the carbon nanotube-reinforced polyetherimide composite films have enhanced electrical conductivity, thermal deformation temperatures, and mechanical properties.
ABSTRACT
Highly oriented, large area continuous composite nanofiber sheets made from surface-oxidized multiwalled carbon nanotubes (MWNTs) and polyacrylonitrile (PAN) were successfully developed using electrospinning. The preferred orientation of surface-oxidized MWNTs along the fiber axis was determined with transmission electron microscopy and electron diffraction. The surface morphology and height profile of the composite nanofibers were also investigated using an atomic force microscope in tapping mode. For the first time, it was observed that the orientation of the carbon nanotubes within the nanofibers was much higher than that of the PAN polymer crystal matrix as detected by two-dimensional wide-angle X-ray diffraction experiments. This suggests that not only surface tension and jet elongation but also the slow relaxation of the carbon nanotubes in the nanofibers are determining factors in the orientation of carbon nanotubes. The extensive fine absorption structure detected via UV/vis spectroscopy indicated that charge-transfer complexes formed between the surface-oxidized nanotubes and negatively charged (-CN[triple bond]N:) functional groups in PAN during electrospinning, leading to a strong interfacial bonding between the nanotubes and surrounding polymer chains. As a result of the highly anisotropic orientation and the formation of complexes, the composite nanofiber sheets possessed enhanced electrical conductivity, mechanical properties, thermal deformation temperature, thermal stability, and dimensional stability. The electrical conductivity of the PAN/MWNT composite nanofibers containing 20 wt % nanotubes was enhanced to approximately 1 S/cm. The tensile modulus values of the compressed composite nanofiber sheets were improved significantly to 10.9 and 14.5 GPa along the fiber winding direction at the MWNT loading of 10 and 20 wt %, respectively. The thermal deformation temperature increased with increased MWNT loading. The thermal expansion coefficient of the composite nanofiber sheets was also reduced by more than an order of magnitude to 13 x 10(-6)/ degrees C along the axis of aligned nanofibers containing 20 wt % MWNTs.
