Photo-recycling the Sacrificial Electron Donor: Towards Sustainable Hydrogen Evolution in a Biphasic System.

H2 may be evolved biphasically using a polarised liquid|liquid interface, acting as a "proton pump", in combination with organic soluble metallocenes as electron donors. Sustainable H2 production requires methodologies to recycle the oxidised donor. Herein, the photo-recycling of decamethylferrocenium cations (DcMFc+ ) using aqueous core-shell semiconductor CdSe@CdS nanoparticles is presented. Negative polarisation of the liquid|liquid interface is required to extract DcMFc+ to the aqueous phase. This facilitates the efficient capture of electrons by DcMFc+ on the surface of the photo-excited CdSe@CdS nanoparticles, with hydrophobic DcMFc subsequently partitioning back to the organic phase and resetting the system. TiO2 (P25) and CdSe semiconductor nanoparticles failed to recycle DcMFc+ due to their lower conduction band energy levels. During photo-recycling, CdS (on CdSe) may be self-oxidised and photo-corrode, instead of water acting as the hole scavenger.

Photoinduced biphasic hydrogen evolution: decamethylosmocene as a light-driven electron donor.

Excitation of the weak electron donor decamethylosmocene on illumination with white light produces an excited-state species capable of reducing organically solubilized protons under biphasic conditions. Insight into the mechanism and kinetics of light-driven biphasic hydrogen evolution are obtained by analysis with gas chromatography, cyclic voltammetry, and UV/Vis and (1)H NMR spectroscopy. Formation of decamethylosmocenium hydride, which occurs prior to hydrogen evolution, is a rapid step relative to hydrogen release and takes place independently of light activation. Remarkably, hydride formation occurs with greater efficiency (ca. 90% conversion) under biphasic conditions than when the reaction is carried out in an acidified single organic phase (ca. 20% conversion). Cyclic voltammetry studies reveal that decamethylosmocene has a higher proton affinity than either decamethylferrocene or osmocene.

Biphasic water splitting by osmocene.

The photochemical reactivity of osmocene in a biphasic water-organic solvent system has been investigated to probe its water splitting properties. The photoreduction of aqueous protons to hydrogen under anaerobic conditions induced by osmocene dissolved in 1,2-dichloroethane and the subsequent water splitting by the osmocenium metal-metal dimer formed during H(2) production were studied by electrochemical methods, UV-visible spectrometry, gas chromatography, and nuclear magnetic resonance spectroscopy. Density functional theory computations were used to validate the reaction pathways.

Hydrogen evolution across nano-Schottky junctions at carbon supported MoS2 catalysts in biphasic liquid systems.

The activities of a series of MoS(2)-based hydrogen evolution catalysts were studied by biphasic reactions monitored by UV/Vis spectroscopy. Carbon supported MoS(2) catalysts performed best due to an abundance of catalytic edge sites and strong electronic coupling of catalyst to support.

Four-electron oxygen reduction by tetrathiafulvalene.

The four-electron reduction of oxygen by tetrathiafulvalene (TTF) in acidified 1,2-dichloroethane and at the acidified water/1,2-dichloroethane interface has been observed. Spectroscopy and ion transfer voltammetry results suggest that the reaction proceeds by the fast protonation of TTF followed by the 4-electron reduction of oxygen to form water. Electronic structure computations give evidence of the formation of a helical tetramer assembly ([TTF(4)H(2)](2+)) of two protonated TTF and two neutral TTF molecules. The protonated tetramer is potentially able to deliver the four electrons needed for the oxygen reduction. The production of water was corroborated by (1)H NMR analysis.

Hydrogen evolution catalyzed by electrodeposited nanoparticles at the liquid/liquid interface.

Aqueous protons reduction by decamethylferrocene in 1,2-dichloroethane can be catalyzed efficiently by platinum and palladium nanoparticles electrogenerated in situ at the liquid-liquid interface.

Molecular electrocatalysis at soft interfaces.

The fundamental aspects of electrochemistry at liquid-liquid interfaces are introduced to present the concept of molecular electrocatalysis. Here, a molecular catalyst is adsorbed at the interface to promote a proton coupled electron transfer reaction such as hydrogen evolution or oxygen reduction using lipophilic electron donors.

Selective detection of hypertoxic organophosphates pesticides via PDMS composite based acetylcholinesterase-inhibition biosensor.

We report on a pair of highly sensitive amperometric biosensors for organophosphate pesticides (OPs) based on assembling acetylcholinesterase (AChE) on poly(dimethylsiloxane) (PDMS)-poly(diallydimethylemmonium) (PDDA)/gold nanoparticles (AuNPs) composite film. Two AChE immobilization strategies are proposed based on the composite film with hydrophobic and hydrophilic surface tailored by oxygen plasma. The twin biosensors show interesting different electrochemical performances. The hydrophobic surface based PDMS-PDDAN AuNPs/choline oxidase (ChO)/AChE biosensor (biosensor-1) shows excellent stability and unique selectivity to hypertoxic organophosphate. At optimal conditions, this biosensor-1 could measure 5.0 x 10(-10) g/L paraoxon and 1.0 x 10(-9) g/L parathion. As for the hydrophilic surface based biosensor (biosensor-2), it shows no selectivity but can be commonly used for the detection of most OPs. Based on the structure of AChE, it is assumed that via the hydrophobic interaction between enzyme molecules and hydrophobic surface, the enzyme active sites surrounded by hydrophobic amino acids face toward the surface and get better protection from OPs. This assumption may explain the different performances of the twin biosensors and especially the unique selectivity of biosensor-1 to hypertoxic OPs. Real sample detection was performed and the omethoate residue on Cottomrose Hibiscus leaves was detected with biosensor-1.

A novel hemin-based organic phase artificial enzyme electrode and its application in different hydrophobicity organic solvents.

Based on the newly discovered artificial enzyme formed by mixing hemin with supramolecular hydrogels via the self-assembly of amphiphilic oligopeptides, we prepared a novel organic phase artificial enzyme electrode by coating the artificial enzyme on an electrode which was then covered with sodium alginate for protection. Scanning electron micrograph showed that the supramolecular hydrogel kept its nanofibers structure on the electrode surface. Hemin dispersed in the supermolecular hydrogel as monomer greatly promotes its direct electrochemistry behavior in organic solvents. At the same time, this electrode exhibited higher electrocatalytic ability to tert-butyl hydroperoxide (TBHP) than free hemin modified electrode (free hemin mainly present as dimer). As low as 27 microM TBHP could be detected with a linear range from 6.6 x 10(-5) to 1.27 x 10(-2)M via amperometric method. The biosensor can reach 95% of the steady-state current in about 10+/-2s. More importantly, it can be applied in both hydrophilic and hydrophobic solvents without adding extra buffer or mediators to them that cannot be received by most traditional organic phase enzyme electrodes. This unique property greatly promotes the development of the organic phase enzyme electrodes by facilitating the detection of different kinds of substrates of the hemin-based artificial enzyme soluble in hydrophilic and hydrophobic solvents. The artificial enzyme electrode was successfully used to determine organic peroxides in body lotion samples.

Catalytic deposition of Pb on regenerated gold nanofilm surface and its application in selective determination of Pb2+.

We report a simple method of catalytic deposition of Pb on a gold nanofilm substrate, which was in situ prepared and used as nanocrystal seeds. Due to the unique properties of gold nanocrystal seeds, Pb could be catalytically deposited on the surface of the gold nanofilm. Compared with the deposition of Pb on bare gold electrode, a larger amount of Pb was deposited on the gold nanofilm and the electrical response was amplified significantly. The catalytic deposition of Pb on the gold nanofilm was characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and electrochemical methods. A stable and quasi-reversible redox couple was obtained in neutral solution and studied in detail. The surface of the gold nanofilm could be easily regenerated in 0.1 mol L(-1) nitric acid solution. Since the redox peaks of Pb could be effectively separated from those of other metals such as Cu, Cd, and Zn, a selective determination of Pb2+ was achieved. Linear sweep voltammetry (LSV) was used for the determination of Pb2+. The peak currents of Pb varies linearly with the concentration of Pb2+ in aqueous solution ranging from 1.0 to 10.0 micromol L(-1) (R=0.999), with a detection limit of 0.1 micromol L(-1). It is expected that the gold nanofilm will facilitate the appearance of heavy metal ion sensors with good performance.