ABSTRACT
Alloys with superior properties represent the main topic of recent studies due to their effectiveness in reducing the cost of equipment maintenance and enhancing usage time, in addition to other benefits in domains such as geothermal, marine, and airspace. Al0.5CrFeNiTi was produced by solid state processing in a planetary ball mill, with the objective of obtaining a high alloying degree and a homogenous composition that could be further processed by pressing and sintering. The metallic powder was technologically characterized, indicating a particle size reduction following mechanical alloying processing when compared to the elemental raw powder materials. The microstructural analysis presented the evolution of the alloying degree during milling but also a compact structure with no major defects in the pressed and sintered bulk samples. The X-ray diffraction results confirmed the presence of face-centered cubic (FCC) and body-centered cubic (BCC) phases, predicted by the theoretical calculations, along with a hexagonal close-packed (HCP) phase, where the Al, Cr, Fe, Ni, and Ti phase was identified in both the alloyed powder material and sintered sample.
ABSTRACT
The main objective of this study was to develop a high-entropy alloy (HEA) derived from the CoxCrFeNiTi HEA system (x = 0.5, 1) for protective coatings using the magnetron sputtering method. In order to produce the high-entropy alloy targets required for the magnetron sputtering process, mechanically alloyed metallic powders were consolidated via spark plasma sintering (SPS). The microstructural analysis results of the HEA mixture presented morphology changes after 30 h of alloying, with the particles presenting uniform polygonal shapes and dimensions. Subsequently, 316L stainless steel (SS) specimens were coated via magnetron sputtering, comparing their composition with that of the sputtering targets used for deposition to establish stoichiometry. Microstructural analyses of the SPSed HEAs revealed no defects and indicated a uniform elemental distribution across the surface. Furthermore, the CoCrFeNiTi equiatomic alloy exhibited a nearly stoichiometric composition, both in the coating and the sputtering target. The XRD analysis results indicated that amorphous coatings were obtained for both Co0.5CrFeNiTi and the CoCrFeNiTi HEA, and nanoindentation tests indicated that the CoCrFeNiTi HEA coating presented a hardness of 596 ± 22 HV, compared to the 570 ± 19 HV measured for Co0.5CrFeNiTi, suggesting an improved wear resistance.
ABSTRACT
High-entropy alloys (HEAs) gained interest in the field of biomedical applications due to their unique effects and to the combination of the properties of the constituent elements. In addition to the required property of biocompatibility, other requirements include properties such as mechanical resistance, bioactivity, sterility, stability, cost effectiveness, etc. For this paper, a biocompatible high-entropy alloy, defined as bio-HEA by the literature, can be considered as an alternative to the market-available materials due to their superior properties. According to the calculation of the valence electron concentration, a majority of body-centered cubic (BCC) phases were expected, resulting in properties such as high strength and plasticity for the studied alloy, confirmed by the XRD analysis. The tetragonal (TVC) phase was also identified, indicating that the presence of face-centered cubic (FCC) phases in the alloyed materials resulted in high ductility. Microstructural and compositional analyses revealed refined and uniform metallic powder particles, with a homogeneous distribution of the elemental particles observed from the mapping analyses, indicating that alloying had occurred. The technological characterization of the high-entropy alloy-elaborated powder revealed the particle dimension reduction due to the welding and fracturing process that occurs during mechanical alloying, with a calculated average particle size of 45.12 µm.
ABSTRACT
High-entropy alloys could provide a solution for corrosion resistance due to their impressive properties. Solid-state processing of high purity Co, Cr, Fe, Ni and Mo metallic powders and consolidation resulted in a bulk material that was further machined into electro spark deposition electrodes. After the stainless steel substrate surface preparation, thin successive layers of the high-entropy alloy were deposited and Pull-Off testing was performed on the newly obtained coating, for a better understanding of the adhesion efficiency of this technique. Good adhesion of the coating to the substrate was proved by the test and no cracks or exfoliations were present. Corrosion resistance testing was performed in a liquid solution of 3.5 wt.% NaCl for 6 h at room temperature and the results obtained validated our hypothesis that CoCrFeNiMo0.85 high-entropy alloys could provide corrosion resistance when coating a stainless steel substrate.
