Ultra-compact, broadband adiabatic passage optical couplers in thin-film lithium niobate on insulator waveguides.

We report the first demonstration of broadband adiabatic directional couplers in thin-film lithium niobate on insulator (LNOI) waveguides. A three LN-waveguide configuration with each waveguide having a ridge cross section of less than 1 square micron, built atop a layer of SiO2 based on a 500-µm-thick Si substrate, has been designed and constructed to optically emulate a three-state stimulated Raman adiabatic passage system, with which a unique counterintuitive adiabatic light transfer phenomenon in a high coupling efficiency of >97% (corresponding to a >15 dB splitting ratio) spanning telecom S, C, and L bands for both TE and TM polarization modes has been observed for a 2-mm long coupler length. An even broader operating bandwidth of >800 nm of the device can be found from the simulation fitting of the experimental data. The footprint of the realized LNOI adiabatic coupler has been reduced by >99% compared to its bulk counterparts. Such an ultra-compact, broadband LNOI adiabatic coupler can be further used to implement or integrate with various photonic elements, a potential building block for realizing large-scale integrated photonic (quantum) circuits in LN.

Second-Harmonic Generation in Resonant Nonlinear Metasurfaces Based on Lithium Niobate.

Lithium niobate is an excellent and widely used material for nonlinear frequency conversion due to its strong optical nonlinearity and broad transparency region. Here, we report the fabrication and experimental investigation of resonant nonlinear metasurfaces for second-harmonic generation based on thin-film lithium niobate. In the fabricated metasurfaces, we observe pronounced Mie-type resonances leading to enhanced second-harmonic generation in the direction normal to the metasurface. We find the largest second-harmonic generation efficiency for the resonance dominated by the electric contributions because its specific field distribution enables the most efficient usage of the largest element of the lithium niobate nonlinear susceptibility tensor. This is confirmed by polarization-resolved second-harmonic measurements, where we study contributions from different elements of the nonlinear susceptibility tensor to the total second-harmonic signal. Our work facilitates establishing lithium niobate as a material for resonant nanophotonics.

Electro-optically spectrum switchable, multiwavelength optical parametric oscillators based on aperiodically poled lithium niobate.

We report the first fast switchable multiwavelength optical parametric oscillator based on aperiodic optical superlattice technology. The constructed aperiodically poled lithium niobate (APPLN) integrates the functionalities of two quasi-phase-matching devices on a chip to work simultaneously as an electro-optic (EO) switchable notch-like filter and a multiline optical parametric downconverter. When such an APPLN is built in a 1064-nm-pumped optical resonator system, we achieve the oscillation of dual signals at 1540 and 1550 nm, for a single signal at 1540 nm, and a single signal at 1550 nm in the system when the 3-cm-long APPLN is driven by 0 V, 354 V, and 805 V, respectively. The switching among the three signal spectra is operationally simple and electro-optically fast. The electro-optically switched signals also feature enhanced power spectral density due to the unique EO gain-spectrum filtering mechanism employed in this work.

Nonlinear mode switching in lithium niobate nanowaveguides to control light directionality.

The ability of nanowaveguides to confine and guide light has been applied for developing optical applications such as nanolasers, optical switching and localized imaging. These and others applications can be further complemented by the optical control of the guided modes within the nanowaveguide, which in turn dictates the light emission pattern. It has been shown that the light directionality can be shaped by varying the nanowire cross-sections. Here, we demonstrate that the directionality of the light can be modified using a single nanowaveguide with a nonlinear phenomenon such as second-harmonic generation. In individual lithium niobate nanowaveguides, we use second-harmonic modal phase-matching and we apply it to switch the guided modes within its sub-micron cross-section. In doing so, we can vary the light directionality of the generated light from straight (0° with respect to the propagation direction) to large spread angles (almost 54°). Further, we characterize the directionality of the guided light by means of optical Fourier transformation and show that the directionality of the guided light changes for different wavelengths.

Fabrication of free-standing lithium niobate nanowaveguides down to 50 nm in width.

Nonlinear optical nanoscale waveguides are a compact and powerful platform for efficient wavelength conversion. The free-standing waveguide geometry opens a range of applications in microscopy for local delivery of light, where in situ wavelength conversion helps to overcome various wavelength-dependent issues, such as biological tissue damage. In this paper, we present an original patterning method for high-precision fabrication of free-standing nanoscale waveguides based on lithium niobate, a material with a strong second-order nonlinearity and a broad transparency window covering the visible and mid-infrared wavelength ranges. The fabrication process combines electron-beam lithography with ion-beam enhanced etching and produces nanowaveguides with lengths from 5 to 50 µm, widths from 50 to 1000 nm and heights from 50 to 500 nm, each with a precision of few nanometers. The fabricated nanowaveguides are tested in an optical characterization experiment showing efficient second-harmonic generation.

Fabrication of nanoscale lithium niobate waveguides for second-harmonic generation.

Nanoscale waveguides are basic building blocks of integrated optical devices. Especially, waveguides made from nonlinear optical materials, such as lithium niobate, allow access to a broad range of applications using second-order nonlinear frequency conversion processes. Based on a lithium niobate on insulator substrate, millimeter-long nanoscale waveguides were fabricated with widths as small as 200 nm. The fabrication was done by means of potassium hydroxide-assisted ion-beam-enhanced etching. The waveguides were optically characterized in the near infrared wavelength range showing phase-matched second-harmonic generation.

Second-harmonic generation in lithium niobate nanowires for local fluorescence excitation.

We study the nonlinear optical properties of lithium niobate (LiNbO(3)) nanowires (NWs) fabricated by a top-down ion beam enhanced etching method. First, we demonstrate generation and propagation of the second-harmonic (SH) light in LiNbO(3) NWs of typical rectangular cross-sections of 400 x 600 nm(2) and length from 10 to 50 µm. Then, we show local fluorescent excitation of 4',6-diamidino-2-phenylindole (DAPI) dye with the propagated SH signal in standard concentrations as for biological applications. By measuring the detected average power of the propagated fundamental harmonic (FH) and the SH signal at the output of the NWs, we directly prove the dominating role of the SH signal over possible two-photon excitation processes with the FH in the DAPI dye. We estimate that 63 ± 6 pW of the propagated SH average power is required for detectable dye excitation. Finally, we model the waveguiding of the SH light to determine the smallest NW cross-section (around 40x60 nm(2)) which is potentially able to excite fluorescence with a FH intensity below the cell damage threshold.

Spectral narrowing and manipulation in an optical parametric oscillator using periodically poled lithium niobate electro-optic polarization-mode converters.

We report a unique spectral narrowing and manipulation technique in an optical parametric oscillator (OPO) realized by an integrated periodically poled lithium niobate comprising an optical parametric gain medium sandwiched by two electro-optic polarization-mode converters (EO PMCs). We achieved a manipulation of the gain spectrum of the OPO via EO and/or temperature control of the EO PMCs, in which we obtained single to multiple signal spectral peaks from the OPO with a spectral width reduced by up to 10 times and peak intensity increased by up to 6 times in comparison with the original signal. Fast EO tuning of the narrowed signal spectral peak has also been demonstrated.