Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 10 de 10
Filter
Add more filters










Publication year range
1.
Dent J (Basel) ; 12(6)2024 May 21.
Article in English | MEDLINE | ID: mdl-38920849

ABSTRACT

The aim of this study was to evaluate the level of knowledge of resident dentists and new graduates regarding the etiology, clinical diagnosis, and treatment of the main medical emergency conditions. The study included a sample of 152 new graduates and residents in the first, second, and third year of training in Prosthodontics and General Dentistry from the Faculty of Dental Medicine in Iasi, Romania. Their level of knowledge and the attitudes were assessed using a questionnaire with 24 questions, divided into four sections. The differences among groups were identified using the chi-square test (p < 0.05). A high level of knowledge was found among the three groups of subjects for the questions regarding the recognition of clinical signs in hypoglycemic crisis (88-100%), in anaphylactic shock (83.3-94.5%), and the treatment of angina pectoris (76.2-84.2%). In contrast, a low level of knowledge was found for the questions regarding pulse evaluation in the case of an emergency (26.3-35.7%), the parameters of normal breathing (28.9-43%), and the treatment of hypoglycemic crisis (27.8-44.8%). The study indicated that the dentists had a moderate understanding of dental office medical emergencies and preferred practical training over theoretical courses.

2.
J Pers Med ; 14(5)2024 May 18.
Article in English | MEDLINE | ID: mdl-38793123

ABSTRACT

As an alternative to regenerative therapies, numerous authors have recently proposed bringing back subperiosteal implants. The aim of the study was to present our clinical experience with a subperiosteal jaw implant that needs minimal bone preparation and enables the rapid implantation of prosthetic teeth in edentulous, atrophic alveolar bone. The research included 36 complete or partial edentulous patients (61 subperiostal implants) over a period of 6 years. To create the patient-specific subperiostal implants design, DentalCAD 3.0 Galway software (exocad GmbH, Darmstadt, Germany) was used and fabricated with a Mysint 100 (Sisma S.p.A., Piovene Rocchette, Italy) by titanium alloy powder. The results showed that only 9 of the 36 cases were successful at 6-year follow-up, while 27 cases had complications, including exposure of the metal frame (early or delayed), mobility of the device prior to the first 4-6 months, and late mobility due to recurrent infections and progressive structure exposure; 1 case failed for reasons unrelated to the device. This study indicated that the prudent application of fully customized subperiosteal jaw implants is a dependable alternative for the dental rehabilitation of atrophic edentulous cases that necessitate bone grafts for traditional fixed dental implant solutions.

3.
Medicina (Kaunas) ; 59(9)2023 Sep 21.
Article in English | MEDLINE | ID: mdl-37763811

ABSTRACT

Background and Objectives: Oxidative stress is involved in the alterations at the level of salivary glands, being the cause of oral pathologies like xerostomia, periodontitis, gingivitis, leucoplakia, and cancer. It is known that antioxidants can reverse changes induced by drugs or other chemicals in some organs, but the question is whether these substances can reduce or revert the effects of oxidative stress at the salivary gland level. Our aim was to find histopathological data at the level of salivary glands supporting the hypothesis of the reversal of oxidative stress-induced changes after the treatment with substances with antioxidant effect. Materials and Methods: A systematic search was conducted in PubMed, Science Direct, and Springer databases, including research articles on oxidative stress histological aspects and oxidative stress biomarkers induced by drugs or other chemicals on salivary glands. Results: Out of 1756 articles, 25 articles were selected with data on tissue homogenate used for biochemical analysis of oxidative and antioxidative markers, along with routine hematoxylin eosin (HE) and immunohistochemical analysis used for histopathological and immunohistochemical diagnosis. Drugs (antineoplastic drugs, antibiotics, and analgesics), alcohol, heavy metals, and fluoride can cause oxidative stress, resulting in morphological changes in different tissues, including in salivary glands. There are many antioxidants but only a few were evaluated regarding the effects on salivary glands in animal studies, such as hesperidin and selenium, which can reverse the damage induced by cyclophosphamide; 10-dehydrogingerdione (10-DHGD), a compound extracted from ginger, which has a protective effect against the oxidative stress and apoptosis induced by tramadol; and glycyrrhizic acid, which may repair the injuries incurred after the administration of sodium nitrite. Conclusions: Substances such as hesperidin, selenium, 10-dehydrogingerdione, and glycyrrhizic acid are antioxidants with proven restorative effects on salivary glands for the damage induced by oxidative stress after exposure to drugs and other chemical substances; however, demonstrating their similar effects in human salivary glands is challenging.

4.
Healthcare (Basel) ; 11(15)2023 Jul 31.
Article in English | MEDLINE | ID: mdl-37570412

ABSTRACT

The purpose of this case report was to present the aesthetic result of the reconstruction of facial residual asymmetry after orthognathic surgery using a patient-specific three-dimensional (3D) mold and a custom-made polymethyl methacrylate implant. Through computer-aided design (CAD), the healthy contralateral side of the mandible was superimposed onto the side with the defect. Exocad Gallway (exocad GmbH, Darmstadt, Germany) was used to design the patient-specific implants (PSIs) of the right mandibular angle. Next, the implant mold was created using the Meshmixer software (Version 3.5, Autodesk Inc., San Rafael, CA, USA) and fabricated using additive manufacturing. During the surgical procedure, the patient-specific implant (PSI) was cast inside the resin mold using Simplex P bone cement (Stryker, Mahwah, NJ, USA). The implant was fixed using three screws. Combining both indirect (involving the dental laboratory) and direct (with surgical intervention) approaches, this innovative hybrid method, which incorporates both computer-aided design and additive manufacturing (AM), not only enhanced facial aesthetics, functional rehabilitation, and patient quality of life but also mitigated the potential risks linked to conventional grafting methods.

5.
Healthcare (Basel) ; 11(11)2023 May 31.
Article in English | MEDLINE | ID: mdl-37297748

ABSTRACT

The objective of this study was to report a clinical case of dental implant failure with significant bone loss that was treated using reconstructive surgical techniques. We present a 58-year-old man with a history of implant surgery and implant failure on the mandible. Data collected using cone beam computed tomography (CBCT) and intraoral scans were exported into Exoplan (exocad GmbH, Darmstadt, Germany), from which a standard tessellation file was obtained. To create a customized mandible mesh design, DentalCAD 3.0 Galway software (exocad GmbH, Darmstadt, Germany) was used. Based on guided bone regeneration, the method involved bone reconstruction and the application of a custom titanium mesh. The bone mix was obtained by combining a xenograft (Cerabone, Bottis biomaterials Gmbh, Zossen, Germany), an allograft (Max Graft, granules Bottis biomaterials Gmbh, Zossen, Germany), and an autograft. The titanium meshes were fixed to the bone using self-drilling screws and covered with a resorbable membrane. Immediately after surgery, an impression was recorded, and the next day, the patient received a milled polymethyl methacrylate interim denture. Based on our case study, the presented custom-made implant can be considered a temporary solution, during which guided bone regeneration is expected to take place.

6.
Healthcare (Basel) ; 11(9)2023 Apr 25.
Article in English | MEDLINE | ID: mdl-37174761

ABSTRACT

For facial abnormalities, recent developments in virtual surgical planning (VSP) and the virtual design of surgical splints are accessible. Software companies have worked closely with surgical teams for accurate outcomes, but they are only as reliable as the data provided to them. The current case's aim was to show a fully digitized workflow using a combination of three digital software to correct predicted post-upward sliding genioplasty defects. To reach our goal, we presented a 28-year-old man with long-face syndrome for orthodontic treatment. Before orthognathic surgery, a clinical and paraclinical examination was performed. For a virtual surgical plan, we used the dedicated surgical planning software NemoFab (Nemotec, Madrid, Spain) and Autodesk MeshMixer (Autodesk Inc., San Rafael, CA, USA). To create the design of the digital guides, DentalCAD 3.0 Galway (exocad GmbH, Darmstadt, Germany) and Autodesk MeshMixer (Autodesk Inc., San Rafael, CA, USA) were used. The patient had undergone bilateral sagittal split osteotomy in addition to Le Fort 1 osteotomy and genioplasty, followed by mandible base recontouring ostectomy. Stable fixation was used for each osteotomy. Based on our case, the current orthognathic surgery planning software was not able to perform all the necessary operations autonomously; therefore, future updates are eagerly awaited.

7.
Healthcare (Basel) ; 11(9)2023 May 08.
Article in English | MEDLINE | ID: mdl-37174891

ABSTRACT

Dentists play an essential role in the treatment of dental and periodontal traumatic injuries by providing early and correct treatment. The purpose of the present study was to assess the level of knowledge of dental residents regarding dental trauma. The cross-sectional study was conducted at the Faculty of Dental Medicine within the "Grigore T. Popa" University of Medicine and Pharmacy in Iasi, Romania on a sample of 366 residents in General Dentistry, Pediatric Dentistry and Periodontology. To assess their knowledge, a questionnaire was created containing 18 questions about the clinical signs and therapy of dental trauma, with a focus on tooth avulsion. A very low level of knowledge (<25%) was found only for the type of splinting required to maintain an avulsed tooth on the arch. The highest number of correct answers was provided by the residents in Periodontology. Physiological serum as storage medium was recognized by a percentage of 75.9-80% of the subjects, and 60-77% of them recognized pulp necrosis as complication of dental avulsion. The study underlines the need to introduce in the curriculum of all categories of residents additional information, not only in the already existent theoretical form, but also as possible scenarios of various clinical situations.

8.
Healthcare (Basel) ; 11(3)2023 Feb 01.
Article in English | MEDLINE | ID: mdl-36766990

ABSTRACT

The odontogenic keratocyst (OKC) is among the most aggressive odontogenic cysts because of its high recurrent rate. This study's objective was to describe a 7-year radiological and clinical follow-up of an OKC with two recurrences and a combination of surgical treatments. The cyst contents were drained at the biopsy to allow decompression, and then marsupialization (Partsch I) was carried out with good results. In the following two years, the endodontic and radiological evaluation of the neighboring teeth indicated endodontic avoidance. The remaining OKC enucleation (Partsch II) with chemical curettage and suture was performed two years after the first presentation, and the multifocal recurrences developed were also treated by enucleation and chemical curettage. At the last radiological follow-up, no recurrence was evident. Based on our experience, we concluded that patients diagnosed with a OKC should be radiologically evaluated at least once a year for at least 7 years, the endodontic diagnosis and treatment of neighboring teeth should be performed as early as possible, and the combination of surgical treatment and the long follow-up period is challenging.

9.
Medicina (Kaunas) ; 58(9)2022 Sep 01.
Article in English | MEDLINE | ID: mdl-36143869

ABSTRACT

Background and Objectives: Alveolar ridge augmentation in the complex bone defect is a popular topic in implantology. Guided bone regeneration (GBR) is one of the most commonly applied methods to reconstruct alveolar bone. The application of a membrane is the fundamental principle of GBR. There are many membrane types used in oral surgery, but the advantage of the titanium mesh is the rigidity which provides space maintenance and prevents contour collapse. The smooth surface also reduces bacterial contamination. Using computer-aided design (CAD) and computer-aided manufacturing (CAM) in dentistry allows us to obtain the perfect architecture form of the mesh, which covers and protects the bone reconstruction. Case presentation: We present a surgical case of a 27-year-old female patient with severe aesthetic bone atrophy after a deficient odontectomy. Based on the GBR clinical applications, the technique consists of bone reconstruction and a customized titanium mesh application. Using mesh titanium in this case presentation was a reliable alternative to perform a lateral alveolar bone augmentation and reconstruct ridge deformities before reaching an ideal implant placement. Conclusions: According to our case report, the customized titanium mesh could be a valuable option for guided bone regeneration in aesthetic maxillary defects.


Subject(s)
Surgical Mesh , Titanium , Adult , Bone Transplantation/methods , Esthetics , Female , Humans , Printing, Three-Dimensional
10.
Medicina (Kaunas) ; 58(9)2022 Sep 06.
Article in English | MEDLINE | ID: mdl-36143907

ABSTRACT

Background and Objectives: Study models are essential tools used in the dental teaching process. The aim of the present study was to compare the values obtained by manual and digital orthodontic measurements on physical and digital case study models. Materials and Methods: The physical experimental models were obtained by traditional pouring (improved stone-type IV gypsum products) and by additive manufacturing (resins). The digital experimental models were created by scanning the physical ones, using a white light-emitting diode (LED) source and an L-shaped dental scanner­Swing DOF (DOF, Seoul, Korea). The physical study models were first measured using a digital caliper, and then, they were scanned and evaluated using the DentalCad 3.0 Galway software (exocad GmbH, Darmstadt, Germany). The Pont, Linder−Harth, and Bolton indices, which are used in orthodontics for training students, were derived using the available data. Results: When comparing the linear measurement mean ranks taken on physical study models to those of digital models, no statistically significant differences (p > 0.05) were found. A similar result was also shown when the dentoalveolar growth indicators were analyzed. Conclusions: It can be concluded that dental study models made by direct light processing (DLP) and pouring type IV class gypsum are both acceptable for orthodontic teaching purposes.


Subject(s)
Models, Dental , Orthodontics , Calcium Sulfate , Humans , Imaging, Three-Dimensional , Reproducibility of Results , Software
SELECTION OF CITATIONS
SEARCH DETAIL
...