Lactococcal 936-species phage attachment to surface of Lactococcus lactis.

The interactions of the 936-species phages sk1, jj50, and 64 with the cell surface of Lactococcus lactis LM0230 were analyzed. Cell envelopes (walls + plasma membrane), cell wall, or plasma membrane from L. lactis ssp. lactis LM0230 each inactivated the phages in vitro. However, other 936-species phages kh and P008, which do not infect strain LM0230, were not inactivated by any of the subcellular fractions. Treating cell walls or plasma membrane with the cell wall hydrolase mutanolysin eliminated inactivation of phage sk1. This suggested that intact cell wall fragments were required for inactivation. A role for plasma membrane in phage sk1 inactivation was further investigated. Boiling, washing in 2 M KCl, 8 M urea, or 0.1 M Na(2)CO(3)/pH 11, or treating the plasma membrane with proteases did not reduce adsorption or inactivation of phage. Adding lipoteichoic acid or antibodies to lipoteichoic acid did not reduce inactivation of phage in a mixture with membrane, suggesting that lipoteichoic acid was not involved. Inactivation by envelopes or cell wall correlated with ejection of DNA from the phage sk1 capsid. Although calcium is required for plaque formation, it was not required for adsorption, inactivation, or ejection of phage DNA by envelopes or cell wall. The results suggest that at least for phages sk1, jj50, and 64, adsorption and phage DNA injection into the host does not require a host membrane protein or lipoteichoic acid, and that cell wall components are sufficient for these initial steps of phage infection.

Inhibition of gene expression in Escherichia coli by antisense phosphorodiamidate morpholino oligomers.

Antisense phosphorodiamidate morpholino oligomers (PMOs) were tested for the ability to inhibit gene expression in Escherichia coli. PMOs targeted to either a myc-luciferase reporter gene product or 16S rRNA did not inhibit luciferase expression or growth. However, in a strain with defective lipopolysaccharide (lpxA mutant), which has a leaky outer membrane, PMOs targeted to the myc-luciferase or acyl carrier protein (acpP) mRNA significantly inhibited their targets in a dose-dependent response. A significant improvement was made by covalently joining the peptide (KFF)(3)KC to the end of PMOs. In strains with an intact outer membrane, (KFF)(3)KC-myc PMO inhibited luciferase expression by 63%. A second (KFF)(3)KC-PMO conjugate targeted to lacI mRNA induced beta-galactosidase in a dose-dependent response. The end of the PMO to which (KFF)(3)KC is attached affected the efficiency of target inhibition but in various ways depending on the PMO. Another peptide-lacI PMO conjugate was synthesized with the cationic peptide CRRRQRRKKR and was found not to induce beta-galactosidase. We conclude that the outer membrane of E. coli inhibits entry of PMOs and that (KFF)(3)KC-PMO conjugates are transported across both membranes and specifically inhibit expression of their genetic targets.

Surface expression of the conserved C repeat region of streptococcal M6 protein within the Pip bacteriophage receptor of Lactococcus lactis.

The C repeat region of the M6 protein (M6c) from Streptococcus pyogenes was expressed within the Pip bacteriophage receptor on the surface of Lactococcus lactis. M6c was also detected in the culture medium. The pip-emm6c allele was integrated into the chromosome and stably expressed without antibiotic selection. The level of cell-associated surface expression of PipM6c was 0.015% of total cellular protein. The amount of PipM6c on the cell surface was increased about 17-fold by expressing pip-emm6c from a high-copy-number plasmid. Replacing the native pip promoter with stronger promoters isolated previously from Lactobacillus acidophilus increased surface expression of PipM6c from the high-copy-number plasmid up to 27-fold. Concomitantly, the amount of PipM6c in the medium increased 113-fold. The amount of PipM6c did not vary greatly between exponential- and stationary-phase cultures. Western blots indicated that the full-length PipM6c protein and most of the numerous proteolytic products were found only on the cell surface, whereas only one proteolytic fragment was found in the culture medium.

Molecular characterization of a new abortive infection system (AbiU) from Lactococcus lactis LL51-1.

This study reports on the identification and characterization of a novel abortive infection system, AbiU, from Lactococcus lactis. AbiU confers resistance to phages from the three main industrially relevant lactococcal phage species: c2, 936, and P335. The presence of AbiU reduced the efficiency of plaquing against specific phage from each species as follows: 3.7 x 10(-1), 1.0 x 10(-2), and 1.0 x 10(-1), respectively. abiU involves two open reading frames, abiU1 (1,772 bp) and abiU2 (1,019 bp). Evidence indicates that AbiU1 is responsible for phage resistance and that AbiU2 may downregulate phage resistance against 936 and P335 type phages but not c2 type phage. AbiU appeared to delay transcription of both phage 712 and c2, with the effect being more marked on phage c2.

Cloning of genomic DNA of Lactococcus lactis that restores phage sensitivity to an unusual bacteriophage sk1-resistant mutant.

An unusual, spontaneous, phage sk1-resistant mutant (RMSK1/1) of Lactococcus lactis C2 apparently blocks phage DNA entry into the host. Although no visible plaques formed on RMSK1/1, this host propagated phage at a reduced efficiency. This was evident from center-of-infection experiments, which showed that 21% of infected RMSK1/1 formed plaques when plated on its phage-sensitive parental strain, C2. Moreover, viable cell counts 0 and 4 h after infection were not significantly different from those of an uninfected culture. Further characterization showed that phage adsorption was normal, but burst size was reduced fivefold and the latent period was increased from 28.5 to 36 min. RMSK1/1 was resistant to other, but not all, similar phages. Phage sensitivity was restored to RMSK1/1 by transformation with a cloned DNA fragment from a genomic library of a phage-sensitive strain. Characterization of the DNA that restored phage sensitivity revealed an open reading frame with similarity to sequences encoding lysozymes (beta-1,4-N-acetylmuramidase) and lysins from various bacteria, a fungus, and phages of Lactobacillus and Streptococcus and also revealed DNA homologous to noncoding sequences of temperate phage of L. lactis, DNA similar to a region of phage sk1, a gene with similarity to tRNA genes, a prophage attachment site, and open reading frames with similarities to sun and to sequences encoding phosphoprotein phosphatases and protein kinases. Mutational analyses of the cloned DNA showed that the region of homology with lactococcal temperate phage was responsible for restoring the phage-sensitive phenotype. The region of homology with DNA of lactococcal temperate phage was similar to DNA from a previously characterized lactococcal phage that suppresses an abortive infection mechanism of phage resistance. The region of homology with lactococcal temperate phage was deleted from a phage-sensitive strain, but the strain was not phage resistant. The results suggest that the cloned DNA with homology to lactococcal temperate phage was not mutated in the phage-resistant strain. The cloned DNA apparently suppressed the mechanism of resistance, and it may do so by mimicking a region of phage DNA that interacts with components of the resistance mechanism.

Lactococcal bacteriophages require a host cell wall carbohydrate and a plasma membrane protein for adsorption and ejection of DNA.

The mechanism of the initial steps of bacteriophage infection in Lactococcus lactis subsp. lactis C2 was investigated by using phages c2, ml3, kh, l, h, 5, and 13. All seven phages adsorbed to the same sites on the host cell wall that are composed, in part, of rhamnose. This was suggested by rhamnose inhibition of phage adsorption to cells, competition between phage c2 and the other phages for adsorption to cells, and rhamnose inhibition of lysis of phage-inoculated cultures. The adsorption to the cell wall was found to be reversible upon dilution of the cell wall-adsorbed phage. In a reaction step that apparently follows adsorption to the cell wall, all seven phages adsorbed to a host membrane protein named PIP. This was indicated by the inability of all seven phages to infect a strain selected for resistance to phage c2 and known to have a defective PIP protein. All seven phages were inactivated in vitro by membranes from wild-type cells but not by membranes from the PIP-defective, phage c2-resistant strain. The mechanism of membrane inactivation was an irreversible adsorption of the phage to PIP, as indicated by adsorption of [S] methionine-labeled phage c2 to purified membranes from phage-sensitive cells but not to membranes from the resistant strain, elimination of adsorption by pretreatment of the membranes with proteinase K, and lack of dissociation of S from the membranes upon dilution. Following membrane adsorption, ejection of phage DNA occurred rapidly at 30 degrees C but not at 4 degrees C. These results suggest that many lactococcal phages adsorb initially to the cell wall and subsequently to host cell membrane protein PIP, which leads to ejection of the phage genome.

Isolation and characterization of sulfite mutants of Saccharomyces cerevisiae.

Sulfite-resistant and sulfite-sensitive mutants of Saccharomyces cerevisiae were isolated and characterized. Genetic analysis indicated that one and four genes were responsible for the resistant and sensitive responses, respectively, and suggested that defects in methionine and cysteine metabolism were not involved. Some resistant alleles, all of which were dominant, conferred greater resistance than others. Mutations conferring sensitivity were recessive and one co-segregated with impaired respiration. Two of the sensitive mutants exhibited cross-sensitivity to other metabolic inhibitors: sulfometuron methyl, cycloheximide, oligomycin, and antimycin A. A 50% glutathione deficiency in one sensitive mutant was not sufficient in itself to account for its sensitivity. Screening of other relevant mutants revealed that relative to wild-type, met8 and a thioredoxin null mutant are sensitive, and met3 and met14 mutants are not. Reduced production of extracellular acetaldehyde, a compound that detoxifies sulfite, was observed in three of the four sensitive mutants. However, acetaldehyde was also underproduced in the resistant mutant. Because sulfite is a reducing agent, cells were tested for coincident sensitivity or resistance to ascorbate, selenite, dithiothreitol, nitrite, thiosulfate, reduced glutathione, and cysteine. No consistent pattern of responses to these agents emerged, suggesting that the response to sulfite is not a simple function of redox potential.

Cloning of a chromosomal gene required for phage infection of Lactococcus lactis subsp. lactis C2.

A phage-resistant mutant with a defect in a membrane component required for phage infections in Lactococcus lactis subsp. lactis C2 was transformed with a chromosomal library of the wild-type, phage-sensitive strain. Of the 4,200 transformants screened for phage sensitivity, three were positively identified as phage sensitive. A cause-and-effect relationship between the cloned chromosomal fragments and the phage-sensitive phenotype was established on the basis of the following two criteria: (i) the frequency of loss of the cloned fragments in the absence of antibiotic selection pressure correlated with the frequency of loss of phage sensitivity; and (ii) phage sensitivity was transferred to 100% of recipient, phage-resistant cells transformed with the cloned fragment. The cloned chromosomal DNA from the three independent isolates was physically mapped with restriction endonucleases. The sizes of the cloned fragments were 9.6, 11.8, and 9.5 kb. Each fragment contained an identical stretch of DNA common to all three, which was 9.4 kb. The gene that conferred phage sensitivity was localized by subcloning to a 4.5-kb region. Further subcloning indicated that a single EcoRI site within the 4.5-kb region must lie within the gene or its promoter. The required 4.5-kb region was sequenced and found to code for one partial and two complete open reading frames. The gene required for complementation was functionally mapped by Tn5 mutagenesis and localized to one of the two complete open reading frames, which was designated pip (an acronym for phage infection protein). pip is 2,703 bases in length. Potential promoters start 206 and 212 bases upstream of the open reading frame. A ribosome binding site and a seven-base spacer precede the GTG (Val) translation initiation codon. The amino acid sequence deduced from the gene has 901 residues and an M(r) of 99,426. Hydropathy analysis revealed four to six potential membrane-spanning regions, one near the amino terminus and the others at the extreme carboxyl terminus. The amino terminus has characteristics of a signal sequence. The putative protein would have a 650-residue, central polar domain.

A membrane protein is required for bacteriophage c2 infection of Lactococcus lactis subsp. lactis C2.

Phage-resistant mutants, isolated from cultures of Lactococcus lactis subsp. lactis C2 infected with phage c2, did not form plaques but bound phage normally. The mutants were sensitive to another phage, sk1, although the number of plaques was reduced approximately 56% and the plaques were four times smaller. Binding to phage sk1 was reduced about 10%. Another group of phage-resistant mutants, isolated from cultures infected with phage sk1, bound normally to both phages c2 and sk1 but did not form plaques with either phage. Carbohydrate analyses by gas chromatography of the cell walls showed no significant differences in saccharide compositions between the wild-type and phage-resistant cells. However, a difference was observed in the interactions of the phage with the cytoplasmic membranes. Membranes from the wild-type cells, but not mutant cells, inactivated phage c2. Phage sk1 was not inactivated by membrane from either strain. Treatment of wild-type membranes with proteinase K eliminated the ability of the membrane to inactivate the phage, whereas treatment with mutanolysin had no effect. On the basis of this ability to inactivate the phage, a membrane protein was partially purified by gel filtration and ion-exchange chromatography. Under nondenaturing conditions, the phage-inactivating protein has an apparent Mr of approximately 350,000. The protein has an apparent subunit size of 32 kDa, which suggests that it normally exists as a multimer with 10 to 12 subunits or in association with other membrane components. It is proposed that this protein is required for phage c2 infection.

Energy requirements for protein translocation across the Escherichia coli inner membrane.

Both ATP and an electrochemical potential play roles in translocating proteins across the inner membrane of Escherichia coli. Recent discoveries have dissected the overall transmembrane movement into separate subreactions with different energy requirements, identified a translocation ATPase, and reconstituted both energy-requiring steps of the reaction from purified components. A more refined understanding of the energetics of this fundamental process is beginning to provide answers about the basic issues of how proteins move across the hydrophobic membrane barrier.

Electrochemical potential releases a membrane-bound secretion intermediate of maltose-binding protein in Escherichia coli.

A secretionary intermediate of the Escherichia coli maltose-binding protein accumulated in the inner membrane when the membrane electrochemical potential was reduced and the cytosolic ATP concentration was normal. The intermediate was mature in size, but maintained a conformation similar to the cytosolic precursor form, and not the mature periplasmic protein, as measured by differences in susceptibility to proteinase K in vitro. The intermediate was located on the periplasmic side of the inner membrane. Restoration of the membrane electrochemical potential resulted in the movement of the intermediate from the inner membrane to the periplasm. In other experiments in which the ATP concentration was reduced by 96% and the electrochemical potential remained normal, no intermediate accumulated. Thus, the final step in the export of maltose-binding protein requires the electrochemical potential of the inner membrane and does not require ATP.

The bacteriophage kh receptor of Lactococcus lactis subsp. cremoris KH is the rhamnose of the extracellular wall polysaccharide.

A receptor for bacteriophages of lactic acid bacteria, including Lactococcus lactis subsp. cremoris KH, was found on the cell wall and not on the cell membrane, as determined by a phage-binding assay of sodium dodecyl sulfate- and mutanolysin-treated cell walls. The cell wall carbohydrates of L. lactis subsp. cremoris KH were analyzed by gas chromatography and mass spectrometry and found to contain rhamnose, galactose, glucose and N-acetylglucosamine. Similar analysis of mutants that were reduced in the ability to bind phages kh, 643, c2, ml3, and 1 indicated that galactose was essential for binding all phages. In addition, rhamnose was required for binding phages kh and ml3. Inhibition studies of phage binding by using two different lectins with a specificity for galactose indicated that phage kh may not bind directly to galactose. Rather, galactose may be an essential structural component located in the vicinity of the receptor. Incubation of any of the five phages with rhamnose or of phage kh with purified cell walls inactivated the phages. Inactivation required divalent cations and was irreversible. Inactivation of phages was stereospecific for rhamnose, as neither L-(+)- nor D-(-)-fucose (the stereoisomers of rhamnose) inhibited the phage. Furthermore, phage infection of a culture was completely inhibited by the addition of rhamnose to the medium. Therefore, the receptor for phage kh appears to be a rhamnose component of the extracellular wall polysaccharide.

Translocation of pro-OmpA across inner membrane vesicles of Escherichia coli occurs in two consecutive energetically distinct steps.

The rate of energy-dependent transfer of pro-OmpA across Escherichia coli inner membrane vesicles in vitro was found to be a function of the ATP concentration. At concentrations above 0.1 mM ATP, the addition of a transmembrane electrochemical potential (proton motive force or pmf) increased the rate of pro-OmpA translocation. Additional experiments demonstrated that the overall reaction proceeded by at least two distinct energy-requiring steps. The first step required only ATP, was nearly unaffected by the pmf, and resulted in the insertion of the amino-terminal domain of pro-OmpA across the membrane. The insertion exposed the signal sequence cleavage site to the periplasmic side of the membrane, as measured by the appearance of a mature length translocation intermediate. However, this intermediate was partially exposed to the cytoplasmic side of the membrane. In a second energy-dependent step, either ATP or the pmf was sufficient to complete the translocation of mature length OmpA across the membrane.

Both ATP and the electrochemical potential are required for optimal assembly of pro-OmpA into Escherichia coli inner membrane vesicles.

Pro-OmpA is processed to OmpA by isolated inverted plasma membrane vesicles from Escherichia coli. In the presence of ATP and a membrane potential, 58% (+/- 13%) of the OmpA is sequestered in the vesicles. We sought to determine which of these two metabolic energy sources is used for protein translocation. The plasma membrane F1F0-ATPase is the central enzyme that interconverts the energy of membrane electrochemical potential and ATP. To separate the effects of these two forms of energy in vitro, the ATPase was inactivated, either by "stripping" the F1 from the membranes with low salt and EDTA or by using membrane vesicles derived from a strain without the atp operon. In each case, optimal translocation and processing of pro-OmpA required both a membrane potential and ATP. We conclude that ATP and membrane potential are separate requirements for bacterial protein export.

The amino terminus of the yeast F1-ATPase beta-subunit precursor functions as a mitochondrial import signal.

The ATP2 gene of Saccharomyces cerevisiae codes for the cytoplasmically synthesized beta-subunit protein of the mitochondrial F1-ATPase. To define the amino acid sequence determinants necessary for the in vivo targeting and import of this protein into mitochondria, we have constructed gene fusions between the ATP2 gene and either the Escherichia coli lacZ gene or the S. cerevisiae SUC2 gene (which codes for invertase). The ATP2-lacZ and ATP2-SUC2 gene fusions code for hybrid proteins that are efficiently targeted to yeast mitochondria in vivo. The mitochondrially associated hybrid proteins fractionate with the inner mitochondrial membrane and are resistant to proteinase digestion in the isolated organelle. Results obtained with the gene fusions and with targeting-defective ATP2 deletion mutants provide evidence that the amino-terminal 27 amino acids of the beta-subunit protein precursor are sufficient to direct both specific sorting of this protein to yeast mitochondria and its import into the organelle. Also, we have observed that certain of the mitochondrially associated Atp2-LacZ and Atp2-Suc2 hybrid proteins confer a novel respiration-defective phenotype to yeast cells.

M13 procoat inserts into liposomes in the absence of other membrane proteins.

Procoat, the precursor form of the major coat protein of coliphage M13, assembles into the Escherichia coli inner membrane and is cleaved to mature coat protein by leader peptidase. This assembly process has previously been reconstituted using lipids and purified leader peptidase in a cell-free protein synthesis reaction (Watts, C., Silver, P., and Wickner, W. (1981) Cell 25, 347-353; Ohno-Iwashita, Y., and Wickner, W. (1983) J. Biol. Chem. 258, 1895-1900). We now report that procoat can also cross a liposomal membrane composed of only purified phospholipids; leader peptidase is not needed to catalyze insertion. When procoat is synthesized in vitro in the presence of liposomes with encapsulated chymotrypsin, the procoat inserts spontaneously through the membrane and is degraded. The protease was shown by several criteria to be in the lumen of the liposomes. These results demonstrate that the precursor form of an E. coli integral membrane protein can cross a membrane without the aid of leader peptidase or any other membrane proteins.

Intracellular targeting and import of an F1-ATPase beta-subunit-beta-galactosidase hybrid protein into yeast mitochondria.

The gene coding for the yeast mitochondrial F1-ATPase beta subunit (ATP2) has been fused to the Escherichia coli lacZ gene. The chimeric ATP2-lacZ gene codes for a hybrid protein consisting of some 350 amino acids of the F1-ATPase beta subunit at its amino terminus and a large enzymatically active portion of the lacZ gene product, beta-galactosidase (beta-D-galactoside galactohydrolase, EC 3.2.1.23), at its carboxyl terminus. The beta-subunit-beta-galactosidase hybrid protein is expressed in both E. coli and yeast. In yeast, this hybrid molecule is targeted to the mitochondrion and is protected in isolated mitochondria from added protease under conditions in which an outer membrane enzymatic marker is digested. Yeast cells carrying the ATP2-lacZ gene fusion on plasmid p beta Z1 are unable to grow on a nonfermentable carbon source. Upon loss of the p beta Z1 plasmid, growth of the cured host strain on the nonfermentable substrate is restored. In the presence of the beta-subunit-beta-galactosidase hybrid protein, the energy-transducing capacity of the mitochondrial membrane as measured by the 32Pi-ATP exchange reaction is only 9% of that measured in the absence of the gene fusion product. The results indicate that it is the presence of the beta-subunit-beta-galactosidase hybrid protein within mitochondria that interferes with function(s) essential for respiratory growth. These observations open up the prospect of genetic characterization of the signals and cellular machinery responsible for mitochondrial protein delivery.

A method for distinguishing Cu,Zn- and Mn-containing superoxide dismutases.

A procedure has been developed to distinguish between the two forms of eukaryotic superoxide dismutases using a common activity assay. Treatment of cellular fractions with 2% sodium dodecyl sulfate at 37 degrees C for 30 min selectively inactivates the mitochondrial, manganese-containing variant without affecting the cytosolic copper, zinc-superoxide dismutase. After removing excess sodium dodecyl sulfate by precipitation with potassium chloride, the supernate is assayed using the xanthine oxidase-cytochrome c method.