Defect spectroscopy on the dielectric material aluminum oxide.

A method for defect characterization is presented that allows to measure the activation energy, capture cross-section, and defect density in dielectric materials. This is exemplarily performed on aluminum oxide thin films deposited on hydrogen-terminated diamond. During the measurement, samples were illuminated using a 405 nm laser, charging the defects while simultaneously measuring the surface conductivity of the diamond at different temperatures. By applying the standard boxcar evaluation known from deep-level transient spectroscopy, we found five different defect levels in [Formula: see text]. One can be identified as substitutional silicon in aluminum oxide, while the others are most likely connected to either aluminum interstitials or carbon and nitrogen impurities.

Real-Time Detection of Single Auger Recombination Events in a Self-Assembled Quantum Dot.

Auger recombination is a nonradiative process, where the recombination energy of an electron-hole pair is transferred to a third charge carrier. It is a common effect in colloidal quantum dots that quenches the radiative emission with an Auger recombination time below nanoseconds. In self-assembled QDs, the Auger recombination has been observed with a much longer recombination time on the order of microseconds. Here, we use two-color laser excitation on the exciton and trion transition in resonance fluorescence on a single self-assembled quantum dot to monitor in real-time single quantum events of the Auger process. Full counting statistics on the random telegraph signal give access to the cumulants and demonstrate the tunability of the Fano factor from a Poissonian to a sub-Poissonian distribution by Auger-mediated electron emission from the dot. Therefore, the Auger process can be used to tune optically the charge carrier occupation of the dot by the incident laser intensity, independently from the electron tunneling from the reservoir by the gate voltage. Our findings are not only highly relevant for the understanding of the Auger process but also demonstrate the perspective of the Auger effect for controlling precisely the charge state in a quantum system by optical means.

Author Correction: Contrast of 83% in reflection measurements on a single quantum dot.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Patterning of diamond with 10 nm resolution by electron-beam-induced etching.

We report on mask-less, high resolution etching of diamond surfaces, featuring sizes down to 10 nm. We use a scanning electron microscope (SEM) together with water vapor, which was injected by a needle directly onto the sample surface. Using this versatile and low-damage technique, trenches with different depths were etched. Cross sections of each trench were obtained by focused ion beam milling and used to calculate the achieved aspect ratios. The developed technique opens up the possibility of mask- and resist-less patterning of diamond for nano-optical and electronic applications.

Contrast of 83% in reflection measurements on a single quantum dot.

We report on a high optical contrast between the photon emission from a single self-assembled quantum dot (QD) and the back-scattered excitation laser light. In an optimized semiconductor heterostructure with an epitaxially grown gate, an optically-matched layer structure and a distributed Bragg reflector, a record value of 83% is obtained; with tilted laser excitation even 885%. This enables measurements on a single dot without lock-in technique or suppression of the laser background by cross-polarization. These findings open up the possibility to perform simultaneously time-resolved and polarization-dependent resonant optical spectroscopy on a single quantum dot.

Photon Noise Suppression by a Built-in Feedback Loop.

Visionary quantum photonic networks need transform-limited single photons on demand. Resonance fluorescence on a quantum dot provides the access to a solid-state single photon source, where the environment is unfortunately the source of spin and charge noise that leads to fluctuations of the emission frequency and destroys the needed indistinguishability. We demonstrate a built-in stabilization approach for the photon stream, which relies solely on charge carrier dynamics of a two-dimensional hole gas inside a micropillar structure. The hole gas is fed by hole tunneling from field-ionized excitons and influences the energetic position of the excitonic transition by changing the local electric field at the position of the quantum dot. The standard deviation of the photon noise is suppressed by nearly 50% (noise power reduction of 6 dB) and it works in the developed micropillar structure for frequencies up to 1 kHz. This built-in feedback loop represents an easy way for photon noise suppression in large arrays of single photon emitters and promises to reach higher bandwidth by device optimization.

Auger Recombination in Self-Assembled Quantum Dots: Quenching and Broadening of the Charged Exciton Transition.

In quantum dots (QDs), the Auger recombination is a nonradiative process in which the electron-hole recombination energy is transferred to an additional carrier. It has been studied mostly in colloidal QDs, where the Auger recombination time is in the picosecond range and efficiently quenches the light emission. In self-assembled QDs, on the other hand, the influence of Auger recombination on the optical properties is in general neglected, assuming that it is masked by other processes such as spin and charge fluctuations. Here, we use time-resolved resonance fluorescence to analyze the Auger recombination and its influence on the optical properties of a single self-assembled QD. From excitation-power-dependent measurements, we find a long Auger recombination time of about 500 ns and a quenching of the trion transition by about 80%. Furthermore, we observe a broadening of the trion transition line width by up to a factor of 2. With a model based on rate equations, we are able to identify the interplay between tunneling and Auger rate as the underlying mechanism for the reduced intensity and the broadening of the line width. This demonstrates that self-assembled QDs can serve as an ideal model system to study how the charge recapture process, given by the band-structure surrounding the confined carriers, influences the Auger process. Our findings are not only relevant for improving the emission properties of colloidal QD-based emitters and dyes, which have recently entered the consumer market, but also of interest for more visionary applications, such as quantum information technologies, based on self-assembled quantum dots.

Electron-beam induced nano-etching of suspended graphene.

Besides its interesting physical properties, graphene as a two-dimensional lattice of carbon atoms promises to realize devices with exceptional electronic properties, where freely suspended graphene without contact to any substrate is the ultimate, truly two-dimensional system. The practical realization of nano-devices from suspended graphene, however, relies heavily on finding a structuring method which is minimally invasive. Here, we report on the first electron beam-induced nano-etching of suspended graphene and demonstrate high-resolution etching down to ~7 nm for line-cuts into the monolayer graphene. We investigate the structural quality of the etched graphene layer using two-dimensional (2D) Raman maps and demonstrate its high electronic quality in a nano-device: A 25 nm-wide suspended graphene nanoribbon (GNR) that shows a transport gap with a corresponding energy of ~60 meV. This is an important step towards fast and reliable patterning of suspended graphene for future ballistic transport, nano-electronic and nano-mechanical devices.

Spatial high resolution energy dispersive X-ray spectroscopy on thin lamellas.

For conventional samples and measurement geometries the spatial resolution of energy dispersive X-ray spectroscopy is limited by a tear drop shaped emission volume to about 1 µm. This restriction can be substantially improved using thin samples and high acceleration voltage. In this contribution the spatial resolution of energy dispersive X-ray spectroscopy in a scanning electron microscope using thin lamella samples is investigated. At an acceleration voltage of 30 kV, an edge resolution down to Δdedge = 40 ± 10 nm is observed performing linescans across an interface, using an 80 nm thin sample prepared from a GaAs/AlAs-heterostructure. Furthermore, Monte-Carlo simulations of pure elements ranging from sodium to mercury are performed for different sample thicknesses. From the simulations we can derive a simple empirical formula to predict the spatial resolution as a function of sample thickness.

Phase-locked indistinguishable photons with synthesized waveforms from a solid-state source.

Resonance fluorescence in the Heitler regime provides access to single photons with coherence well beyond the Fourier transform limit of the transition, and holds the promise to circumvent environment-induced dephasing common to all solid-state systems. Here we demonstrate that the coherently generated single photons from a single self-assembled InAs quantum dot display mutual coherence with the excitation laser on a timescale exceeding 3 s. Exploiting this degree of mutual coherence, we synthesize near-arbitrary coherent photon waveforms by shaping the excitation laser field. In contrast to post-emission filtering, our technique avoids both photon loss and degradation of the single-photon nature for all synthesized waveforms. By engineering pulsed waveforms of single photons, we further demonstrate that separate photons generated coherently by the same laser field are fundamentally indistinguishable, lending themselves to the creation of distant entanglement through quantum interference.

Synthesis and ink-jet printing of highly luminescing silicon nanoparticles for printable electronics.

The formation of stable colloidal dispersions of silicon nanoparticles (Si-NPs) is essential for the manufacturing of silicon based electronic and optoelectronic devices using cost-effective printing technologies. However, the development of Si-NPs based printable electronics has so far been hampered by the lack of long-term stability, low production rate and poor optical properties of Si-NPs ink. In this paper, we synthesized Si-NPs in a gas phase microwave plasma reactor with very high production rate, which were later treated to form a stable colloidal dispersion. These particles can be readily dispersed in a variety of organic solvents and the dispersion is stable for months. The particles show excellent optical properties (quantum yields of about 15%) and long-term photoluminescence (PL) stability. The stable ink containing functionalized Si-NPs was successfully used to print structures on glass substrates by ink-jet printing. The homogeneity and uniformity of large-area printed film was investigated using photoluminescence (PL) mapping.

Electroluminescence from silicon nanoparticles fabricated from the gas phase.

Electroluminescence from as-prepared silicon nanoparticles, fabricated by gas phase synthesis, is demonstrated. The particles are embedded between an n-doped GaAs substrate and a semitransparent indium tin oxide top electrode. The total electroluminescence intensity of the Si nanoparticles is more than a factor of three higher than the corresponding signal from the epitaxial III-V semiconductor. This, together with the low threshold voltage for electroluminescence, shows the good optical properties of these untreated particles and the efficient electrical injection into the device. Impact ionization by electrons emitted from the top electrode is identified as the origin of the electrically driven light emission.

A two-dimensional electron gas as a sensitive detector for time-resolved tunneling measurements on self-assembled quantum dots.

A two-dimensional electron gas (2DEG) situated nearby a single layer of self-assembled quantum dots (QDs) in an inverted high electron mobility transistor (HEMT) structure is used as a detector for time-resolved tunneling measurements. We demonstrate a strong influence of charged QDs on the conductance of the 2DEG which allows us to probe the tunneling dynamics between the 2DEG and the QDs time resolved. Measurements of hysteresis curves with different sweep times and real-time conductance measurements in combination with an boxcar-like evaluation method enables us to unambiguously identify the transients as tunneling events between the s- and p-electron QD states and the 2DEG and rule out defect-related transients.