ABSTRACT
Bromide-based perovskites have large bandgaps, making them attractive for tandem solar cells developed to overcome the Shockley-Queisser limit. A perovskite solar cell architecture employs transporting layers to improve charge extraction and transport. Due to the wide variety of materials and preparation methods, it is critical to devise fast screening methods to rank transporting layers. Herein, we evaluate perovskite fluorescence quenching followed by time- and energy-resolved photoluminescence (TER-PL) and analyse the intensity dependence as a potential method to qualify charge-transporting layers rapidly. The capability of the technique was evaluated with TiO2/FAPbBr3 and SnO2/FAPbBr3, the most commonly used electron transporting layers, which were prepared using standard protocols to make best-performing devices. The results revealed that TiO2 is the most effective quencher due to the higher density of states in the conduction band, consistent with Marcus-Gerischer's theory. However, record-performance devices use SnO2 as the electron transport layer. This shows that the relationship between photoluminescence quenching and device performance is not bidirectional. Therefore, additional measurements like conductivity are also needed to provide reliable feedback for device performance.
ABSTRACT
Optical upconversion via a multiphoton absorption process converts incoherent low-energy photons to shorter wavelengths. In this contribution, we report a solid-state thin film for infrared-to-visible upconversion composed of plasmonic/TiO2 interfaces. When excited at λ = 800 nm, three photons are absorbed, leading to the excitation of TiO2 trap states into an emissive state in the visible domain. The plasmonic nanoparticle enhances the light absorption capabilities of the semiconductor, increasing emission efficiency by 20 times. We demonstrate that the plasmonic nanoparticle only changes the optical absorption of the semiconductor; i.e., the process is purely photonic. The process occurs in the ultrafast domain (<10 ps), contrasting with molecular triplet-triplet exciton annihilation, the commonly used method in photon upconversion, in the nano- to microsecond time scales. The process utilizes pre-existing trap states within the semiconductor bandgap and involves three-photon absorption.
ABSTRACT
The proliferation of the internet of things (IoT) and other low-power devices demands the development of energy harvesting solutions to alleviate IoT hardware dependence on single-use batteries, making their deployment more sustainable. The propagation of energy harvesting solutions is strongly associated with technical performance, cost and aesthetics, with the latter often being the driver of adoption. The general abundance of light in the vicinity of IoT devices under their main operation window enables the use of indoor and outdoor photovoltaics as energy harvesters. From those, highly transparent solar cells allow an increased possibility to place a sustainable power source close to the sensors without significant visual appearance. Herein, we report the effect of hole transport layer Li-TFSI dopant content on semi-transparent, direct plasmonic solar cells (DPSC) with a transparency of more than 80% in the 450-800 nm region. The findings revealed that the amount of oxidized spiro-OMeTAD (spiro+TFSI-) significantly modulates the transparency, effective conductance and conditions of device performance, with an optimal performance reached at around 33% relative concentration of Li-TFSI concerning spiro-OMeTAD. The Li-TFSI content did not affect the immediate charge extraction, as revealed by an analysis of electron-phonon lifetime. Hot electrons and holes were injected into the respective layers within 150 fs, suggesting simultaneous injection, as supported by the absence of hysteresis in the I-V curves. The spiro-OMeTAD layer reduces the Au nanoparticles' reflection/backscattering, which improves the overall cell transparency. The results show that the system can be made highly transparent by precise tuning of the doping level of the spiro-OMeTAD layer with retained plasmonics, large optical cross-sections and the ultrathin nature of the devices.
ABSTRACT
A carbon-oxygen-bridged ladder-type donor unit (CO5) was invented and prepared via an "intramolecular demethanolization cyclization" approach. Its single crystal structure indicates enhanced planarity compared with the carbon-bridged analogue indacenodithiophene (IDT). Owing to the stronger electron-donating capability of CO5 than IDT, CO5-based donor and acceptor materials show narrower bandgaps. A donor-acceptor (D-A) copolymer donor (PCO5TPD) and an A-D-A nonfullerene acceptor (CO5IC) demonstrated higher performance than IDT-based counterparts, PIDTTPD and IDTIC, respectively. The better performance of CO5-based materials results from their stronger light-harvesting capability and higher charge-carrier mobilities.
