Recovery of cellulose acetate bioplastic from cigarette butts: realization of a sustainable sorbent for water remediation.

Cigarette butts, one of the most common forms of litter in the world, represent a source of chemical and plastic pollution releasing thousands of toxic compounds and microfibers of cellulose acetate (CA). Besides the correct waste management, the recovery of CA from cigarette filters is a way to cushion their negative effects on the environment. Thus far, recycling strategies have been limited to industrial applications, while not many solutions have designed for water remediation. This work describes a strategy to valorize this harmful waste and to reverse its environmental impact, proposing a simple and effective procedure of reclamation of CA and its reuse to prepare a composite sorbent for the treatment of polluted water. The first step entails the washing of filters with hot water (T = 90 °C) and hot ethanol (T = 58-68 °C) to remove the impurities produced during cigarette burning, as verified by means of UV and attenuated total reflection-Fourier-transform infrared (ATR-FTIR) spectroscopy, thermal gravimetric analysis (TGA), and differential scanning calorimetry (DSC). The second step involves the use of the regenerated CA to prepare porous cylinder-shaped cryogels (15 mm × 10 mm) whose sorption properties are enhanced by the combination with AC (15 % w/w). The synthesis takes advantage of the sol-gel transition of the polymer dispersion (5 % w/V) in a solution acetone/water 5 mM in NH3 (60/40, v/v). After characterization by dynamic mechanical analysis (DMA), TGA, FT-IR, and scanning electron microscopy (SEM), the adsorption capability of the physical cryogel was studied in terms of treated environmental water volume, contact time and concentration of the selected pollutants. The results have shown that the proposed strategy is a low-cost way to recycle CA from cigarette butts and that the designed sorbent is a promising material for water treatment, allowing quick removal times and yields >79.6 %.

Nanocomposite microbeads made of recycled polylactic acid for the magnetic solid phase extraction of xenobiotics from human urine.

Nanocomposite microbeads (average diameter = 10-100 µm) were prepared by a microemulsion-solidification method and applied to the magnetic solid-phase extraction (m-SPE) of fourteen analytes, among pesticides, drugs, and hormones, from human urine samples. The microbeads, perfectly spherical in shape to maximize the surface contact with the analytes, were composed of magnetic nanoparticles dispersed in a polylactic acid (PLA) solid bulk, decorated with multi-walled carbon nanotubes (mPLA@MWCNTs). In particular, PLA was recovered from filters of smoked electronic cigarettes after an adequate cleaning protocol. A complete morphological characterization of the microbeads was performed via Fourier-transform infrared (FTIR) spectroscopy, UV-Vis spectroscopy, thermogravimetric and differential scanning calorimetry analysis (TGA and DSC), scanning electron microscopy (SEM) and X-ray diffraction analysis (XRD). The recovery study of the m-SPE procedure showed yields ≥ 64%, with the exception of 4-chloro-2-methylphenol (57%) at the lowest spike level (3 µg L-1). The method was validated according to the main FDA guidelines for the validation of bioanalytical methods. Using liquid chromatography-tandem mass spectrometry, precision and accuracy were below 11% and 15%, respectively, and detection limits of 0.1-1.8 µg L-1. Linearity was studied in the range of interest 1-15 µg L-1 with determination coefficients greater than 0.99. In light of the obtained results, the nanocomposite microbeads have proved to be a valid and sustainable alternative to traditional sorbents, offering good analytical standards and being synthetized from recycled plastic material. One of the main objectives of the current work is to provide an innovative and optimized procedure for the recycling of a plastic waste, to obtain a regular and reliable microstructure, whose application is here presented in the field of analytical chemistry. The simplicity and greenness of the method endows the procedure with a versatile applicability in different research and industrial fields.

Low transition temperature mixture-based extraction of 14 pesticides from tomato samples and their high-performance liquid chromatography-tandem mass spectrometry analysis.

The extensive use of pesticides to control pest infestations has led to the development of analytical methods to determine pesticide residues in food matrices to prevent food exposure. However, most developed analytical methods do not consider impact on the environment in terms of the toxicity of the chemicals used and the amount of waste produced. An environmentally-friendly method, based on a miniaturized matrix solid-phase dispersion followed by high-performance liquid chromatography-tandem mass spectrometry, for the analysis of fourteen pesticides in tomatoes, was exploited. For the recovery of pesticides from tomato samples, a low transition temperature mixture (LTTM), containing choline chloride and sesamol 1:3 molar ratio, was employed. Extraction parameters like sample-to-dispersant ratio, extraction solvent volume and LTTM volume were optimized through a Box-Behnken design. The 1:4 sample-to-dispersant ratio, 900 µL of ethanol as extraction solvent and 50 µL of LTTM ensured the best result considering the pesticides' peak areas. The optimized analytical method was validated obtaining the following results: linearity range was between LOQ and 5 mg kg-1 with a minimum R2 of 0.9944 for tebufenozide, values in the range of 0.001-0.023 and 0.004-0.076 mg kg-1 were obtained for LOD and LOQ respectively, while peak areas intra-day and inter-day repeatability were maximum of 10.19 and 9.15 %, respectively. The analytical method was then applied to real samples studying whole, pulp and peel tomato pool. The analysis of whole and tomato pulp revealed the presence of seven and eight of the fourteen investigated pesticides, respectively. However, their concentration was lower than the limit of quantification. In tomato peel, five pesticides, namely dimethomorph, methoxyfenozide, pyraclostrobin, pyriproxyfen, and spiromesifen were quantified and their concentrations were below maximum residue levels.

A liquid chromatography-mass spectrometry method for the enantioselective multiresidue determination of nine chiral agrochemicals in urine using an enrichment procedure based on graphitized carbon black.

Many agrochemicals are chiral molecules, and most of them are marketed as racemates or diastereomeric mixtures. Stereoisomers that are not the active enantiomer have little or no pesticidal activity and can exert serious toxic effects towards non-target organisms. Thus, investigating the possible exposure to different isomers of chiral pesticides is an urgent need. The present work was aimed at developing a new enantioselective high-performance liquid chromatography-mass spectrometry method for the simultaneous determination of nine chiral pesticides in urine. Two solid-phase extraction (SPE) procedures, based on different carbon-based sorbents (graphitized carbon black (GCB) and buckypaper (BP)), were developed and compared. By using GCB, all analytes were recovered with yields ranging from 60 to 97%, while BP allowed recoveries greater than 54% for all pesticides except those with acid characteristics. Baseline separation was achieved for the enantiomers of all target agrochemicals on a Lux Cellulose-2 column within 24 min under reversed-phase mode. The developed method was then validated according to the FDA guidelines for bioanalytical methods. Besides recovery, the other evaluated parameters were precision (7-15%), limits of detection (0.26-2.21 µg/L), lower limits of quantitation (0.43-3.68 µg/L), linear dynamic range, and sensitivity. Finally, the validated method was applied to verify the occurrence of the pesticide enantiomers in urine samples from occupationally exposed workers.

Recent developments in electromigration techniques related to pharmaceutical and biomedical analysis - A review.

The analysis of pharmaceutical compounds is an important research topic as the use of different drugs affects people's daily life for the treatment of diseases. In addition to the widespread use of the internet, counterfeit drugs have appeared in the market. The development of modern analytical techniques, reliable, precise, sensitive, and rapid methods, has provided powerful means of analysis used in various fields such as drug production, quality control, determination of impurities and/or metabolites, biochemistry, pharmacokinetics, etc. Analytical techniques so far used in the pharmaceutical analysis include high-performance liquid chromatography (HPLC), gas chromatography (GC), super/sub-critical fluid chromatography (SFC), and capillary electromigration techniques such as capillary electrophoresis (CE) and rather rarely capillary electrochromatography (CEC). CE has some advantages over other techniques, e.g., very high efficiency, reduced costs (use of minute volumes of solvents and samples), the possibility to use different separation mechanisms, etc. In this review paper, the main features and limitations of the capillary electromigration techniques (especially CE) are discussed. Some selected applications of CE to the analysis of pharmaceutical compounds published in the period 2021-2023 (May) are reported.

An enantioselective high-performance liquid chromatography-mass spectrometry method to study the fate of quizalofop-P-ethyl in soil and selected agricultural products.

In this study, the attention was focused on quizalofop-ethyl, a chiral herbicide whose formulation has recently been marketed as quizalofop-P-ethyl, i.e. the (+)-enantiomer exhibiting herbicidal activity. To verify the real enantiomeric purity of this product as well as to study its environmental fate, the enantioselective separation of the P- and M- enantiomers of quizalofop-ethyl was achieved on Lux Cellulose-2 column (3­chloro,4-methylphenilcarbamate cellulose) under isocratic conditions in polar organic mode. Once established that the commercial formulation contains ˜ 0.6% (enantiomeric fraction) of M as an impurity, an HPLC-MS/MS method was developed, validated and applied to the analysis of soil, carrots and turnips treated with the herbicide. A simple solid-liquid extraction allowed recoveries greater than 70%; limits of detections of P and M enantiomers were below 5 ng g-1. The analyses of the real samples showed a modification of the enantiomeric fraction of quizalofop-M-ethyl between the commercial formulation (EFM = 0.63 ± 0.03%) and the analysed matrices (EFM = 7.6 ± 0.1% for carrots; EFM = 0% for the other matrices). This outcome highlighted the occurrence of an enantioselective biotic dissipation, responsible for a greater persistency of the distomer in carrots. On the other hand, since screening analyses revealed the occurrence of residues of the metabolite quizalofop-acid with the same EFs as the ester precursor, it was concluded that the hydrolytic conversion was an abiotic process.

Enantiomeric analysis of drugs in water samples by using liquid-liquid microextraction and nano-liquid chromatography.

The nano-LC technique is increasingly used for both fast studies on enantiomeric analysis and test beds of novel stationary phases due to the small volumes involved and the short conditioning and analysis times. In this study, the enantioseparation of 10 drugs from different families was carried out by nano-LC, utilizing silica with immobilized amylose tris(3-chloro-5-methylphenylcarbamate) column. The effect on chiral separation caused by the addition of different salts to the mobile phase was evaluated. To simultaneously separate as many enantiomers as possible, the effect of buffer concentration in the mobile phase was studied, and, to increase the sensitivity, a liquid-liquid microextraction based on the use of isoamyl acetate as sustainable extraction solvent was applied to pre-concentrate four chiral drugs from tap and environmental waters, achieving satisfactory recoveries (>70%).

Room-temperature synthesis of 2D-Ti3C2Tx nano-sheets by organic base treatment.

The growing demand for improved electrochemical performance in energy storage systems has stimulated research into advanced two-dimensional (2D) materials for electrodes. In this work, we obtain a layered MXene compound by exfoliating a titanium aluminum carbide precursor using tetramethylammonium hydroxide (TMAOH) ions in a full room temperature process followed by manual shaking. The hexagonal crystal structure and composition of the layered materials are characterized using different techniques. X-Ray diffraction shows the formation of 2D nano-sheets before and after the TMAOH treatment via its characteristic (002) diffraction peak, bringing to light an increase in the interlayer spacing after treatment. Scanning electron microscopy images confirm the layered morphology, whose composition is determined by energy dispersive x-ray analysis for the bulk material and by x-ray photoelectron spectroscopy for the surface of the obtained compounds. This study demonstrates a promising route to enhance delamination of this MXene 2D material in a low-cost room-temperature approach.

Direct Solar Oven with and without UV Filter vs. Traditional Oven: Effect on Polyphenolic Antioxidants, Vitamins and Carotenoids of Food.

The use of efficient solar ovens can be a way for progressing ecofriendly technologies in the field of food preparation. In most performing direct solar ovens, the sun rays reach the foods directly, therefore, it becomes essential to check whether, in these conditions, foods can retain theirnutraceutical properties (antioxidants, vitamins and carotenoids). In the present research work, to investigate this issue, several foods (vegetables, meats, and a fish sample) were analyzed before and after cooking (traditional oven, solar oven, and solar oven with a UV filter). The content of lipophilic vitamins and carotenoids (analyzed via HPLC-MS) and the variation of total phenolic content (TPC), and antioxidant capacity (via Folin-Ciocalteu and DPPH assays) have evidenced that cooking with the direct solar oven allows to preserve some nutrients (i.e., tocopherols) and, sometimes, to enhance nutraceutical properties of vegetables (for example, solar oven-cooked eggplants showed 38% higher TPC compared to electric oven cooked sample) and meats. The specific isomerization of all-trans-ß-carotene to 9-cis was also detected. The use of a UV filter is advisable to avoid UV drawbacks (for instance, a significant carotenoid degradation) without losing the beneficial effects of the other radiations.

Carbon nanomaterial-based membranes in solid-phase extraction.

Carbon nanomaterials (CNMs) have some excellent properties that make them ideal candidates as sorbents for solid-phase extraction (SPE). However, practical difficulties related to their handling (dispersion in the atmosphere, bundling phenomena, reduced adsorption capability, sorbent loss in cartridge/column format, etc.) have hindered their direct use for conventional SPE modes. Therefore, researchers working in the field of extraction science have looked for new solutions to avoid the above-mentioned problems. One of these is the design of CNM-based membranes. These devices can be of two different types: membranes that are exclusively composed of CNMs (i.e. buckypaper and graphene oxide paper) and polysaccharide membranes containing dispersed CNMs. A membrane can be used either as a filter, operating under flow-through mode, or as a rotating device, operating under the action of magnetic stirring. In both cases, the main advantages arising from the use of membranes are excellent results in terms of transport rates, adsorption capability, high throughput, and ease of employment. This review covers the preparation/synthesis procedures of such membranes and their potential in SPE applications, highlighting benefits and shortcomings in comparison with conventional SPE materials (especially, microparticles carbonaceous sorbents) and devices. Further challenges and expected improvements are addressed too.

Evaluation of the carotenoid and fat-soluble vitamin profile of industrial hemp inflorescence by liquid chromatography coupled to mass spectrometry and photodiode-array detection.

Industrial hemp (Cannabis sativa L.) is a plant matrix whose use is recently spreading for pharmaceutical and nutraceutical purposes. Detailed characterization of hemp composition is needed for future research that further exploits the beneficial effects of hemp compounds on human health. Among minor constituents, carotenoids and fat-soluble vitamins have largely been neglected to date despite carrying out several biological activities and regulatory functions. In the present paper, 22 target carotenoids and fat-soluble vitamins were analyzed in the inflorescences of seven Italian industrial hemp varieties cultivated outdoor. The analytes were extracted by cold saponification to avoid artifacts and analyzed by high-performance liquid chromatography coupled with Selected reaction monitoring mass spectrometry. Phytoene, phytofluene, and all-trans-ß-carotene were the most abundant in all analyzed samples (31-55 µg g-1, 11.6-29 µg g-1, and 7.3-53 µg g-1, respectively). Besides the target analytes, liquid chromatography coupled with photodiode-array detection allowed us to tentatively identify several other carotenoids based on their retention behavior and UV-vis spectra with the support of theoretical rules and data in the literature. To the best of our knowledge, this is the first comprehensive characterization of carotenoids and fat-soluble vitamins in industrial hemp inflorescence.

Biomonitoring of pesticides in urine by using isoamyl acetate as a sustainable extraction solvent.

The protection of the health and safety of workers in the agricultural sector requires the assessment of human exposure to pesticides through biomonitoring programs. In doing this, the health and safety of laboratory analysts should be also protected through the use of analytical procedures as safe as possible. According to Green Analytical Chemistry and Green Sample Preparation principles, the use of miniaturized extraction techniques such as dispersive liquid-liquid microextraction (DLLME) should be encouraged, with the aim of limiting the consumption of chemicals (solvents and reagents) and energy, as well as the production of wastes. Moreover, safer and more environmentally friendly alternatives to petroleum-derived solvents must be found. In this regard, the effort of researchers is focused on the development/identification of sustainable solvents, some of which have been ranked according to their disposal, environmental, safety, and health features. Here, we introduce the alternative use of isoamyl acetate ("banana oil") as sustainable extraction solvent. Compared with the trendy class of eutectic solvents (ESs), isoamyl acetate is advantageous because it is already in the liquid state, which fasters operations, and because it can be evaporated to dryness and reconstituted in a solvent compatible with the mobile chromatographic phase, which is not an option for ESs. The applicability of isoamyl acetate has been here evaluated for the first time to extract 12 pesticides of different polarities from urine matrix, by using a DLLME approach. The HPLC/MS validated method has proven to possess the sensitivity, precision and accuracy required to reliable bioanalytical methods. Its cheapness, simplicity and quickness make it an ideal sustainable choice for the screening of large numbers of samples in health monitoring programs involving people occupationally-exposed to pesticides.

Extraction of Emerging Contaminants from Environmental Waters and Urine by Dispersive Liquid-Liquid Microextraction with Solidification of the Floating Organic Droplet Using Fenchol:Acetic Acid Deep Eutectic Mixtures.

In this work, several eutectic mixtures formed by fenchol and acetic acid at seven molar ratios (between 4:1 and 1:4) were characterized and studied for the first time for their possible application as extraction solvents in dispersive liquid-liquid microextraction based on the solidification of the floating organic droplet (DLLME-SFO). A group of 13 emerging contaminants (gemfibrozil, bisphenol F, bisphenol A, 17ß-estradiol, testosterone, estrone, levonorgestrel, 4-tert-octylphenol, butyl benzyl phthalate, dibutyl phthalate, 4-octylphenol, 4-nonylphenol, and dihexyl phthalate) was selected and determined by liquid chromatography with ultraviolet and tandem mass spectrometry detection. Among the studied mixtures, only those of 2:1 and 1:1 provided the suitable features from an operational and repeatability point of view, suggesting that several eutectic mixtures of the same components may also provide similar results. Once the extraction conditions of both mixtures were optimized, the method was applied to the extraction of sea water, urine, and wastewater at different concentration levels, allowing the achievement of absolute recovery values between 49 and 100% for most analytes with relative standard deviation values below 19%. In addition, several samples of each type were analyzed, finding bisphenol A and gemfibrozil in some of them. The greenness of the method was also evaluated using the AGREEprep metric. The DLLME-SFO procedure was found to be very simple, quick, and effective and with a good sample throughput.

Enantioselective high-performance liquid chromatographic separations to study occurrence and fate of chiral pesticides in soil, water, and agricultural products.

As many as 40% of all plant protection products currently used contain chiral active ingredients. Enantiomers of the same pesticide have identical physicochemical properties in an isotropic medium, but they may display different activity and toxicity because of their interaction with enzymes or other naturally occurring asymmetric molecules. This difference may also lead to variations in biotic degradation rates, making one enantiomer more persistent than the other in natural and agricultural environments. In terms of methodological aspects, this critical review describes the most used chiral stationary phases for HPLC enantioseparations of chiral pesticides, pinpointing their strengths and weaknesses. As far as their applicability is concerned, most research has been carried out by means of columns based on derivatized amylose/cellulose due to their rather universal analyte coverage. The chromatographic compatibility with sensitive detection techniques, such as mass spectrometry, has allowed the trace analysis of stereoisomers, revealing ubiquitous occurrence of some chiral pesticides in surface waters, sediments, plants, agricultural soils, roots, fruit and vegetables. The study of their distribution and degradation in various environmental compartments and agricultural soil-plant systems has highlighted the enrichment with one enantiomer over the other in certain matrices following the enantioselective dissipation catalysed by microorganisms or plant enzymes as well as the phenomenon of chiral inversion in some cases. Irrespective of the reliability of a chiral method, such investigations are often hindered by the lack of pure standards of single enantiomers, which makes it difficult to identify their stereochemical configuration and requires precise strategies of quantification. Surely, the research in this field has been grown over the last few years due to the necessity of assessing and limiting risks related to exposure to chiral pesticides, which can be considered emerging contaminants in all aspects.

Fosfomycin Pharmacokinetic Profile in Plasma and Urine and Quantitative Estimation in Prostate and Seminal Vesicles after One and Two Consecutive Doses of Oral Fosfomycin Trometamol in Healthy Male Volunteers.

The present Phase I study investigated, for the first time, fosfomycin pharmacokinetics in humans after two 3 g doses of fosfomycin trometamol administered 27 h apart, according to the dose regimen recommended for the prophylactic indication for transrectal prostate biopsy in adult men. Plasma, urine and seminal plasma concentrations were measured after one and two consecutive doses in 24 healthy men, representative of the target population of the prophylactic indication. Prostate and seminal vesicle concentrations were estimated based on seminal plasma concentrations using a one-step regression method. The exposure to fosfomycin was very similar in rate (Cmax, tmax) after one and two doses. The AUC showed a minimal increment. On average, the apparent volume of distribution was high (>100 L), and the mean clearance had an intermediate value. The total amount and dose fraction of fosfomycin excreted in urine showed a small increment after two doses. The renal clearance was about 5 L/h. The fosfomycin concentration in the prostate and seminal vesicles showed that the antibiotic increased on average after two consecutive doses. This result confirmed the ability of fosfomycin to distribute into the prostate and into seminal vesicles after one single dose and that a two consecutive dose regimen increases the antibiotic availability inside these peripheral tissues.

Photons for Photography: A First Diagnostic Approach to Polaroid Emulsion Transfer on Paper in Paolo Gioli's Artworks.

The aim of this research is to study and diagnose for the first time the Polaroid emulsion transfer in the contemporary artist Paolo Gioli's artworks to provide preliminary knowledge about the materials of his artworks and the appropriate protocols which can be applied for future studies. The spectral analysis performed followed a multi-technical approach first on the mock-up samples created following Gioli's technique and on one original artwork of Gioli, composed by: FORS (Fiber Optics Reflectance), Raman, and FTIR (Fourier-Transform InfraRed) spectroscopies. These techniques were chosen according to their completely non-invasiveness and no requirement for sample collection. The obtained spectra from FTIR were not sufficient to assign the dyes found in the transferred Polaroid emulsion. However, they provided significant information about the cellulose-based materials. The most diagnostic results were obtained from FORS for the determination of the dye developers present in the mock-up sample which was obtained from Polacolor Type 88 and from Paolo Gioli's original artwork created with Polacolor type 89.

Removal of Copper Corrosion Products by Using Green Deep Eutectic Solvent and Bio-Derivative Cellulose Membrane.

A safe and environmentally friendly material for corrosion removal from metals is proposed in this article. Electrochemically corroded copper was selected as a target material, and a deep eutectic solvent (DES) composed of choline chloride and ascorbic acid, in a molar ratio of 2:1, was developed to this end. Aqueous solutions of the DES with a concentration above 70 wt% were found to be effective in the dissolution of patina and less aggressive towards other materials such as CaCO3, which is the main component of limestone. These concentrated DES solutions were integrated with either cotton swabs or cellulose-based membranes and used for the cleaning of electrochemically corroded copper. The membrane containing 80 wt% DES aqueous solution exhibited the most desirable cleaning ability in terms of speed and area selectivity. X-ray diffraction analysis of the corroded copper before and after the application of the membrane was performed to demonstrate the successful corrosion removal.

Enantioseparation of selected chiral agrochemicals by using nano-liquid chromatography and capillary electrochromatography with amylose tris(3­chloro-5-methylphenylcarbamate) covalently immobilized onto silica.

In this paper enantiomers of selected chiral agrochemicals representing various structural classes were separated by using nano-liquid chromatography (nano-LC) and capillary electrochromatography (CEC) employing a capillary column packed with silica particles containing immobilized amylose tris(3­chloro-5-methylphenylcarbamate) (i-ADMPC) as a chiral selector (CS). Special attention was paid to peak dispersion in nano-LC and CEC instruments used in order to make comparison between these two techniques more reliable. Enantioseparations were studied utilizing methanol (MeOH) or acetonitrile-water (ACNH2O), both containing 5 mM of ammonium acetate as the mobile phases (MPs). The tested chiral stationary phase (CSP), containing 20% (w/w) of the neutral CS onto native silica, allowed the generation of sufficiently strong electroosmotic flow (EOF) to observe separation of enantiomers of studied agrochemicals in a reasonable time also in CEC mode. Modestly higher efficiencies and enantioresolutions were obtained in CEC than in nano-LC. Just a moderate preference of CEC over nano-LC in this particular study can be explained with a significant mass transfer resistance through the CSP that is caused due to high content of the CS in CSP.

Safety and serum distribution of anti-SARS-CoV-2 monoclonal antibody MAD0004J08 after intramuscular injection.

The emerging threat represented by SARS-CoV-2 variants, demands the development of therapies for better clinical management of COVID-19. MAD0004J08 is a potent Fc-engineered monoclonal antibody (mAb) able to neutralize in vitro all current SARS-CoV-2 variants of concern (VoCs) including the omicron variant even if with significantly reduced potency. Here we evaluated data obtained from the first 30 days of a phase 1 clinical study (EudraCT N.: 2020-005469-15 and ClinicalTrials.gov Identifier: NCT04932850). The primary endpoint evaluated the percentage of severe adverse events. Secondary endpoints evaluated pharmacokinetic and serum neutralization titers. A single dose administration of MAD0004J08 via intramuscular (i.m.) route is safe and well tolerated, resulting in rapid serum distribution and sera neutralizing titers higher than COVID-19 convalescent and vaccinated subjects. A single dose administration of MAD0004J08 is also sufficient to effectively neutralize major SARS-CoV-2 variants of concern (alpha, beta, gamma and delta). MAD0004J08 can be a major advancement in the prophylaxis and clinical management of COVID-19.

Hydrophobic Eutectic Solvent-Based Dispersive Liquid-Liquid Microextraction Applied to the Analysis of Pesticides in Wine.

A green solvent-based DLLME/HPLC-MS method for the determination of 19 pesticides in wine samples has been developed. The extractant solvent is a hydrophobic eutectic mixture composed of L-menthol and butylated hydroxytoluene in a molar ratio of 3:1. The endogenous ethanol of wine has been used as dispersive solvent, in order to avoid the solidification of the extracts under 19 °C. The mobile phase composition, the elution gradient and the sample injection volume were optimized in order to make this hydrophobic mixture compatible with conventional reversed phase chromatography and electrospray ionization. The method was validated in matrix, using a wine free from the target compounds. Average recovery as high as 80%, precision between 3 and 14%, and limits of detection and quantification much lower than the maximum residue levels (MRLs) for grapes and wines fixed by the EU regulation, make this multiresidue method fitted for the purpose, with the further advantages of being quick, cheap and in compliance with the green analytical chemistry. From the analysis of 11 commercial wines it was found that just in a bio sample the target compounds were not detectable or lower than quantification limit; as for the other samples, the most widespread and abundant pesticides were methoxyfenozide and boscalid, but their levels were much lower than the relative MRLs.