Influence of Er:YAG and ND:YAG laser irradiation and fluoride application on surface roughness and dentin surface wear after erosive challenge - An in vitro study.

Background: To evaluate the effectiveness of Er:YAG and Nd:YAG laser on dentin hypersensitivity prevention, associated or not to acidulated phosphate fluoride (APF) after erosive challenge. Material and Methods: 104 specimens were obtained from bovine dentine and divided into groups (n=13): G1: Er:YAG; G2: Er:YAG followed by application of APF; G3: application of APF followed by Er:YAG, simultaneously; G4: Nd:YAG; G5: Nd:YAG followed by application of APF; G6: application of APF followed by Nd:YAG, simultaneously; G7:application of APF; G8: untreated. The parameters for Er:YAG were:10s, distance of 4mm, water cooling flow of 2mL/min, 2Hz, 3.92J/cm2. For the Nd:YAG: 10s, distance of 1mm, without cooling, 10Hz, 70.7J/cm2. The erosive drink was a cola at 4°C, 3×/day for 1 minute, for 5 days. Roughness and wear analysis were done in confocal laser microscope. Data were statistically analyzed (α=0.05). Results: As regards roughness, there was no statistically difference among the groups. The groups irradiated with Er:YAG had a volume loss lower. G6 showed higher values than the groups irradiated with Er:YAG and lower than the other groups. The other groups irradiated with Nd:YAG showed similar wear results to the control. Conclusions: The Er:YAG laser showed the lowest volume loss from wear analysis, suggesting the increased the acid resistance of dentin. Key words:Dentine sensitivity, Lasers, Sodium fluoride.

Presence of Streptococcus mutans and interleukin-6 and -10 in amniotic fluid.

AIM: To evaluate the presence of Streptococcus mutans (SM), main pathogen of dental caries, interleukin-6 and -10 in samples of amniotic fluid (AF) and clinical and oral data of the healthy pregnancy, to investigate the SM exposition in intrauterine life and to elucidate the presence of antibodies to SM in newborns' saliva (SA) with undetectable levels of this microorganism described in the previous study. METHODS: The study involved the participation of 26 women with term deliveries and without gestational complications. General health data were collected through a questionnaire applied to the participants. The volunteers were examined orally, the caries experience (decayed, missing, and filled teeth (DMFT) scores) was calculated and unstimulated SA was collected. The acquisition of AF was performed during cesarean sections and stocked on ice. The analysis of the presence of SM-DNA was performed by real-time PCR assays with specific primers. Levels of IL-6 and IL-10 were performed by ELISA with specific kits for these interleukins in the AF samples. RESULTS: 69.2% of the AF samples had detectable SM, and 65% of the women had the bacteria in the AF and SA at the same time. There was a positive association between the presence of SM in AF and a report of not going to the dentist frequently (p<.05). There was no statistically significant difference between the frequency of AF with or without detection of MS and active caries (p>.05). However, the DMFT scores of women with positive AF for SM were higher than that of women without detectable MS (p<.05). IL-6 levels were higher than IL-10 in AF (p<.05). There were no significant differences in the levels of interleukins between samples with detectable SM or in AF and even with clinical data analysis (p>.05). CONCLUSIONS: The AF samples have SM in quantifiable levels, probably associated with the greatest caries experience, and seen by the highest DMFT index. Interleukin levels were not related to the presence of MS. The presence of SM in AF may explain the mucosal immune stimulation of newborn children by the previous detection of salivary antibodies against SM.

Color Stability and Surface Roughness of Hybrid and Nanofilled Composites Brushed with Abrasive Dentifrices / Estabilidade de Cor e Rugosidade Superficial de Resinas Compostas Micro-Híbridas e Nanoparticulada Submetidas à Escovação com Dentifrícios Abrasivos

The aim of this study was to evaluate the color stability and the surface roughness of different composites brushed with toothpastes presenting different levels of abrasivity. Thirty discs of each material were obtained using michohybrid composites (Brilliant NG and Charisma Diamond) and a nanocomposite (Filtek Z350XT). The initial color (CIELab) and surface roughness (confocal laser scanning microscopy) of resin discs were evaluated. Afterwards, 10 specimens per group were brushed with the following dentifrices: Maximum Cavity Protection, Sensodyne Repair & Protect and Colgate Sensitive Pro-Relief. Brushing was performed with an electric toothbrush equipped with soft bristle head, with standard power and weight, for 30 minutes. Every 30 seconds, 1.0 ml of the slurry was injected between the bristles of the brush and the specimen. After abrasive challenge, the samples had their color and roughness reevaluated. Data were submitted to the Kruskal-Wallis test (color change) or the t-test (surface roughness). The level of significance was 5%. Results: Brushing did not significantly change the color of the composites tested in the study herein . On the other hand, the surface roughness of the composites was significantly affected by the abrasive challenge, regardless of the toothpaste used. The surface roughness change was similar for all the composites. The abrasive challenge with the toothpastes Maximum Cavity protection, Sensodyne Repair & Protect and Colgate Sensitive Pro-Relief was not able to significantly change the color of the composite resins. Nevertheless, the abrasive challenges significantly altered the surface roughness of all the evaluated composites. However, the changes in surface roughness were statistically similar in the microhybrid and nanofilled composites. (AU)

O objetivo deste estudo foi avaliar a estabilidade de cor e a rugosidade superficial de diferentes resinas compostas escovadas com dentifrícios de diferentes níveis de abrasividade. Trinta discos de cada material foram obtidos utilizando compósitos micro-híbridos (Brilliant NG e Charisma Diamond) e um nanocompósito (Filtek Z350XT). A cor inicial (CIELab) e a rugosidade superficial (microscopia confocal de varredura a laser) dos discos de resina foram avaliadas. Em seguida, 10 amostras por grupo foram escovadas com os dentifrícios Máxima Proteção Anticáries, Sensodyne Repair & Protect e Colgate Sensitive Pro-Alívio. A escovação foi realizada com uma escova elétrica com cabeça de cerdas macias, com potência e peso padronizados, durante 30 minutos. A cada 30 segundos, 1,0 ml da pasta era injetada entre as cerdas da escova e a amostra. Após o desafio abrasivo, as amostras tiveram sua cor e rugosidade reavaliadas. Os dados foram submetidos ao teste de Kruskal-Wallis (alteração de cor) ou ao teste t (rugosidade da superfície) (α=5%). A escovação não alterou significativamente a cor dos compósitos. Por outro lado, a rugosidade superficial dos compósitos foi significativamente afetada pelo desafio abrasivo, independentemente do dentifrício utilizado. A alteração da rugosidade superficial foi semelhante para todos os compósitos. O desafio abrasivo com a Máxima Proteção Anticáries, o Sensodyne Repair & Protect e o Colgate Sensitive Pro-Alívio não foi capaz de alterar significativamente a cor das resinas. Diferentemente, os desafios abrasivos alteraram significativamente a rugosidade superficial de todos os compósitos avaliados. No entanto, as mudanças na rugosidade foram estatisticamente semelhantes nos compósitos micro-híbridos e nanoparticulado. (AU)

Influence of Er,Cr:YSGG laser on root dentin submitted to erosive and/or abrasive challenges.

This study evaluated how Er,Cr:YSGG laser, associated or not with 5% fluoride varnish, influences the surface roughness and volume loss of bovine root dentin submitted to erosive and/or abrasive wear. One hundred and twenty dentin specimens were divided into the groups: without preventive treatment (WPT), 5% fluoride varnish (FV); Er,Cr:YSGG laser irradiation (L), and varnish combined with laser (FV + L). The specimens (n = 10) were subdivided into: 1 = erosion (E); 2 = abrasion (A); and 3 = erosion followed by abrasion (E + A). The erosive solution used was a soft-drink (pH = 2.42 at 4ºC) applied in 5-min cycles twice a day for 10d. Abrasive wear involved brushing for 60s with an electric brush (1,600-oscillations/s) at a load of 2.0N. Surface roughness and volume loss were evaluated using a laser scanning confocal microscope. Roughness data were submitted to one-way ANOVA and Tukey post-hoc test. For volume loss, the Kruskal-Wallis and Dunn's post-hoc tests were used (α = 5%). The lowest values of roughness were found in the control areas of all subgroups (p > 0.05). In the experimental area, the [(WPT) + (E+A)] subgroup had a significantly higher roughness (5.712 ± 0.163 µm 2 ) than the other subgroups (p < 0.05). The L and (FV + L) groups had statistically similar roughness, regardless of the type of wear. The (FV + L) group had the lowest volume loss, regardless of the type of wear performed: [(FV + L) + (E)] = 7.5%, [(FV + L) + (A) = 7.3%, and [(FV + L) + (E + A)] = 8.1%. The subgroup [(WPT) + (E + A)] had the highest volume loss (52.3%). The proposed treatments were effective in controlling dentin roughness. Laser irradiation can be an effective method to increase root dentin resistance after challenges and limit problems related to non-carious lesions.

Influence of Er, Cr: YSGG laser on root dentin submitted to erosive and/or abrasive challenges

Abstract This study evaluated how Er,Cr:YSGG laser, associated or not with 5% fluoride varnish, influences the surface roughness and volume loss of bovine root dentin submitted to erosive and/or abrasive wear. One hundred and twenty dentin specimens were divided into the groups: without preventive treatment (WPT), 5% fluoride varnish (FV); Er,Cr:YSGG laser irradiation (L), and varnish combined with laser (FV + L). The specimens (n = 10) were subdivided into: 1 = erosion (E); 2 = abrasion (A); and 3 = erosion followed by abrasion (E + A). The erosive solution used was a soft-drink (pH = 2.42 at 4ºC) applied in 5-min cycles twice a day for 10d. Abrasive wear involved brushing for 60s with an electric brush (1,600-oscillations/s) at a load of 2.0N. Surface roughness and volume loss were evaluated using a laser scanning confocal microscope. Roughness data were submitted to one-way ANOVA and Tukey post-hoc test. For volume loss, the Kruskal-Wallis and Dunn's post-hoc tests were used (α = 5%). The lowest values of roughness were found in the control areas of all subgroups (p > 0.05). In the experimental area, the [(WPT) + (E+A)] subgroup had a significantly higher roughness (5.712 ± 0.163 μm 2 ) than the other subgroups (p < 0.05). The L and (FV + L) groups had statistically similar roughness, regardless of the type of wear. The (FV + L) group had the lowest volume loss, regardless of the type of wear performed: [(FV + L) + (E)] = 7.5%, [(FV + L) + (A) = 7.3%, and [(FV + L) + (E + A)] = 8.1%. The subgroup [(WPT) + (E + A)] had the highest volume loss (52.3%). The proposed treatments were effective in controlling dentin roughness. Laser irradiation can be an effective method to increase root dentin resistance after challenges and limit problems related to non-carious lesions.

Influence of Er, Cr: Ysgg Laser Associated or not To 5% Fluoride Varnish in the Erosion Treatment of Bovine Enamel / Influência do Laser Er, Cr: Ysgg Associado ou não ao Verniz Fluoretado 5% no Tratamento da Erosão em Esmalte Bovino

The objective of this in vitro study was to evaluate the influence of the Er,Cr:YSGG laser associated or not to a desensitizing agent in the treatment of erosive lesions. Forty specimens with dimensions of 4mm x 4mm and 3mm thickness were divided into 4 groups (n = 10): G1- no treatment; G2- 5% fluoride varnish; G3- Er,Cr: YSGG; G4 - fluoride varnish + laser. The specimens were immersed in erosive drink 3 times a day for 1 minute with an average interval of 2 hours between cycles for a period of 10 days. The treatments were performed according to the groups and the surface roughness and the wear profile were analyzed by scanning confocal microscopy. The normality (Kolmogorov-Smirnov) and homogeneity (Levene's) of the tests were evaluated. After these analyzes, the surface roughness data were submitted to the statistical analysis of Variance Analysis (ANOVA). All tests adopted a significance level of 5% (α = 0.05). At the representative images of the wear profile, the morphology of bovine dental enamel in its control and eroded areas were compared and qualitatively discussed. As regard surface roughness, there was no statistically significant difference between the groups. The qualitative analysis of the loss of volume showed that all experimental groups showed significant superficial morphology differences. Considering the limitations of an in vitro study, it can be concluded that the treatments performed were not able to treat dental erosion satisfactorily, indicating the need for more treatment sessions. (AU)

O objetivo desse estudo in vitro foi avaliar a influência do laser Er,Cr:YSGG associado ou não a um agente dessensibilizante no tratamento de lesões erosivas. Foram confeccionados 40 espécimes com dimensões de 4mm x 4mm e 3mm de espessura, divididos em 4 grupos (n=10): G1- nenhum tratamento; G2- verniz fluoretado 5%; G3- aplicação do laser Er,Cr:YSGG; G4- verniz fluoretado + laser. Os espécimes foram imersos em bebida erosiva, 3 vezes por dia, durante 1 minuto, com intervalo médio de 2 horas entre os ciclos, por um período de 10 dias. Os tratamentos foram realizados de acordo com os grupos e que foram analisados a rugosidade superficial e o perfil de desgaste por meio de microscopia confocal de varredura. Avaliou-se a normalidade (Kolmogorov-Smirnov) e homogeneidade (Levene's) dos dados. Após estas análises, os dados de rugosidade superficial foram submetidos ao teste estatístico de Análise de Variância (ANOVA). Todos os testes adotaram nível de significância de 5% (α=0,05). Através da obtenção das imagens representativas do perfil desgaste, a morfologia do esmalte dental bovino em suas áreas controle e erodida foram comparadas e qualitativamente discutidas. Quanto à rugosidade superficial, não houve diferença estatisticamente significativa entre os grupos. A análise qualitativa da perda de volume mostrou que todos os grupos experimentais apresentaram diferenças significativas na morfologia superficial. Considerando as limitações de um estudo in vitro pode-se concluir que os tratamentos realizados não foram capazes de tratar a erosão dentária de forma satisfatória, indicando a necessidade de mais sessões de tratamento.

Use of Resin Infiltrate for the Treatment of White spot Lesions on Dental Enamel: Case Report / Utilização de Infiltrante Resinoso Para o Tratamento de Lesões de Mancha Branca do Esmalte Dental: Relato de Caso

Early diagnosis of white spot lesions allows non-invasive treatment to be indicated for the remineralization of active lesions. The goal was to report the clinical Protocol for the treatment of white spot lesion of a patient by the technique of resin infiltration, observing whether there is change of color on the white spot of the dental enamel after its treatment. The selected patient was 16 years old with good overall health, who featured white spot lesion of the dental enamel on tooth 13, classified as ICDAS score 2. The tooth was photographed, and its color was evaluated with the spectrophotometer in accordance with the CIELhC system. For comparison purposes, the color of tooth enamel in an area adjacent to the lesion was evaluated. The treatment of the lesion was performed with the resin infiltrate Icon (DMG, Hamburg, Germany), following the manufacturer's instructions. The color of the tooth was re-evaluated after the application of the resin infiltrate. At the end of the procedure, it was observed that the treatment of white spot lesion by resin infiltration technique reached its goal because, in addition to being minimally invasive, it was highly approved by patient and it provided the masking of the white spot lesion on the dental enamel. (AU).

O diagnóstico precoce de lesões de mancha branca permite que um tratamento não invasivo seja indicado para a remineralização das lesões ativas. O objetivo foi relatar o protocolo clínico para tratamento de lesão de mancha branca ativa de um paciente pela técnica do infiltrante resinoso, observando se existe alteração de cor da mancha branca do esmalte dental após o seu tratamento. Foi selecionada uma paciente, de 16 anos de idade, com boa saúde geral e que apresentava lesão de mancha branca no esmalte dental do dente 13, classificada pelo escore 2 do ICDAS. O dente foi fotografado e sua cor foi avaliada com o espectrofotômetro de acordo com o sistema CIELhC. Para fins de comparação, foi avaliada a cor do esmalte dental em uma área adjacente à lesão. O tratamento da lesão foi realizado com a resina infiltrante Icon (DMG, Hamburgo, Alemanha), seguindo as recomendações do fabricante. A cor do dente foi reavaliada após a aplicação do infiltrante. Ao final do procedimento, observou-se que o tratamento da lesão de mancha branca pela técnica da resina infiltrante atingiu seu objetivo pois, além de ter sido minimamente invasiva, foi bem avaliada pela paciente e proporcionou o mascaramento da lesão de mancha branca do esmalte dental. (AU).

Streptococcus mutans detection in saliva and colostrum samples.

OBJECTIVE: To detect Streptococcus mutans in colostrum and saliva of neonates and compare with its detection in saliva of mothers. METHODS: Forty-three healthy women, full-term gestations with no complications, submitted to elective Cesarean section, and their newborns were included in the study. Samples were investigated by polymerase chain reaction to detect S. mutans in genetic material from the samples. RESULTS: Approximately 16% of colostrum samples showed S. mutans , but not correlated with the presence of the bacteria in both samples of saliva. S. mutans was detected in 49 and 30% of saliva samples of mothers and neonates, respectively. There was a positive correlation in S. mutans detection between types of saliva. The number of maternal samples of saliva with detectable S. mutans was smaller in women receiving dental treatment during pregnancy. Tooth brushing, three times a day, influenced the detection of S. mutans in both the saliva and the colostrum. CONCLUSION: Although maternal saliva may present S. mutans , few samples of colostrum present the bacteria. The presence of bacteria in neonate saliva may be related to contact before birth. Dental treatment and hygiene habits seem to influence the detection of S. mutans in samples of maternal saliva and colostrum.

Influence of Er,Cr:YSGG laser, associated or not to desensitizing agents, in the prevention of acid erosion in bovine root dentin.

This in vitro study evaluated the influence of the Er,Cr:YSGG laser, associated or not to desensitizing agents, in the prevention of acid erosion in bovine root dentin. Eighty dentin specimens were selected and divided into eight groups (n = 10): G1: negative control; G2: positive control (5% fluoride varnish-FV); G3: Er,Cr:YSGG laser; G4: FV + laser; G5: 3% potassium oxalate; G6: 3% potassium oxalate + laser; G7: biphasic calcium silicate/phosphate gel (gel); G8: gel + laser. Laser parameters: 0.5 W, 6.25 J/cm2 at 1-mm distance. The erosive drink used was a cola soft-drink (pH = 2.42 at 4 °C), lasting 5 min, twice a day, with 6-h intervals between the challenges, during 14 days. Kolmogorov-Smirnov and Levene's tests were satisfied. The surface roughness data were submitted to ANOVA and Tukey post hoc tests. For the wear profile, Kruskal-Wallis and Dunn post hoc tests were used. Afterwards, the Spearman correlation test was performed. All statistical tests assumed a significance level of 5% (α = 0.05). G1 presented the highest surface roughness value after the erosive challenge (3.586 µm2 ± 0.205 µm2) and the G7 presented the lowest surface roughness value after the erosive challenge (1.071 µm2 ± 0.180 µm2). For the lost volume, G4 presented the lowest percentage (9.7% ± 0.9%), while G1 had the highest percentage (41.8% ± 2.5%), both with p < 0.05. There was a weak correlation between the response variables (ρ = 0.33). All groups presented lower values of surface roughness and loss of volume when compared to the negative control group. For the surface roughness, the biphasic calcium silicate/phosphate gel presented the best result. For volume loss, the 5% fluoride varnish + Er,Cr:YSGG laser showed the best results compared to the other groups.

Streptococcus mutans detection in saliva and colostrum samples / Detecção de Streptococcus mutans em amostras de saliva e colostro

ABSTRACT Objective To detect Streptococcus mutans in colostrum and saliva of neonates and compare with its detection in saliva of mothers. Methods Forty-three healthy women, full-term gestations with no complications, submitted to elective Cesarean section, and their newborns were included in the study. Samples were investigated by polymerase chain reaction to detect S. mutans in genetic material from the samples. Results Approximately 16% of colostrum samples showed S. mutans , but not correlated with the presence of the bacteria in both samples of saliva. S. mutans was detected in 49 and 30% of saliva samples of mothers and neonates, respectively. There was a positive correlation in S. mutans detection between types of saliva. The number of maternal samples of saliva with detectable S. mutans was smaller in women receiving dental treatment during pregnancy. Tooth brushing, three times a day, influenced the detection of S. mutans in both the saliva and the colostrum. Conclusion Although maternal saliva may present S. mutans , few samples of colostrum present the bacteria. The presence of bacteria in neonate saliva may be related to contact before birth. Dental treatment and hygiene habits seem to influence the detection of S. mutans in samples of maternal saliva and colostrum.

RESUMO Objetivo Detectar Streptococcus mutans no colostro e na saliva de recém-nascido, e comparar com a detecção na saliva da mãe. Métodos Foram incluídos no estudo 43 mulheres saudáveis, com gestações a termo e sem complicações, que tiveram cesariana eletiva, e seus recém-nascidos. As amostras foram investigadas por reação de polimerase em cadeia para a detecção de S. mutans em material genético extraído das amostras. Resultados Cerca de 16% das amostras de colostro apresentaram S. mutans , não sem correlação com a presença das bactérias em ambas amostras de saliva. S. mutans foi detectado em 49 e 30% das amostras de saliva das mães e recém-nascidos, respectivamente. Houve correlação positiva na detecção de S. mutans entre os tipos de saliva. O número de amostras de saliva materna com S. mutans detectável foi menor nas mulheres que receberam tratamento odontológico durante a gravidez. A escovação três vezes ao dia influenciou na detecção do S. mutans tanto no saliva quanto no colostro. Conclusão Embora a saliva materna possa apresentar S. mutans , poucas amostras de colostro apresentam a bactéria. A presença de bactéria na saliva de neonatos pode estar relacionada ao contato antes do nascimento. O tratamento odontológico e os hábitos de higiene parecem influenciar na detecção de S. mutans em amostras de saliva e colostro maternos.

Influence of Remineralizing Dentifrice in the Treatment of Erosive Enamel Lesions / Influência de Dentifrício Remineralizante no Tratamento de Lesões Erosivas em Esmalte

The objective of this in vitro study was to evaluate the influence of different remineralizing agents in the treatment of enamel erosive lesions. Specimens of 4mmx4mm and 3mm thickness were made from the buccal surface of bovine incisors (n=10) and randomly divided into 4 groups. G1 = application of the remineralizing dentifrice, G2 = application of the remineralizing agent, G3 = remineralizing dentifrice + remineralizing agente, G4 = application of fluoride varnish (positive control), G5 = no treatment Specimens were immersed in refrigerant solution during a period of 10 days. The surface roughness was analyzed by means of confocal laser scanning microscopy. The data were analyzed for homogeneity (Levene's) and normality (Kolmogorov-Smirnov). Parametric tests with analysis of variance were performed on two criteria: time factor and treatment factor, and Tukey post-test for differentiation of means. All tests were statistically significant at 5% (α = 0.05). The results showed statistically significant difference, demonstrating the reduction of surface roughness after the first treatment (G3) and the other groups (G1, G2 and G4) only after the second treatment. It was concluded that the use of dentifrice composed of calcium silicate and sodium phosphate influenced the roughness of the eroded tooth enamel of the bovine tooth. (AU)

O objetivo deste trabalho in vitro foi avaliar a influência de diferentes agentes remineralizantes no tratamento de lesões erosivas em esmalte. Foram confeccionados espécimes de 4mmx4mm e 3 mm de espessura a partir da superfície vestibular de incisivos bovinos (n=10) e divididos aleatoriamente em 4 grupos. G1=aplicação do dentifrício remineralizante, G2= aplicação do agente potencializador remineralizante, G3= dentifrício remineralizante + agente potencializador remineralizante, G4=aplicação de verniz fluoretado (controle positivo), G5=nenhum tratamento (controle negativo). Os espécimes foram imersos em refrigerante durante um período de 10 dias. A rugosidade superficial foi analisada por meio de microscopia confocal de varredura a laser. Os dados foram analisados quanto à homogeneidade (Levene's) e normalidade (Kolmogorov- Smirnov). Foram realizados testes paramétricos com análise de variância a dois critérios: fator tempo e fator tratamento, e pós-teste de Tukey para diferenciação das médias. Todos os testes estatísticos tiveram nível de significância de 5% (α=0,05). Os resultados obtidos mostraram diferenças estatisticamente significantes, demonstrando a redução da rugosidade da superfície do esmalte logo após o primeiro tratamento (G3) e para os demais grupos (G1, G2 e G4) somente após o segundo tratamento. Concluiu-se que a utilização de dentifrício composto por silicato de cálcio e fosfato de sódio influenciou na rugosidade do esmalte erodido do dente bovino. (AU).

Efeito da Degradação Química sobre a Rugosidade Superficial e Estabilidade de Cor de Resinas Compostas Micro-híbrida e Nanoparticulada / Effect of Chemical Degradation on Surface Roughness and on Color Stability of Micro hybrid and Nanofilled Composites

A resina composta é o material restaurador mais utilizado atualmente. Apesar de seu sucesso clínico, o material está sujeito a alterações em suas propriedades físicas, quando exposto ao meio bucal. O objetivo foi avaliar a influência da degradação química na estabilidade de cor e na rugosidade superficial de resinas micro-híbrida e nanoparticulada. Foram confeccionados 40 discos (6,0mm x 2,0mm) da resina composta micro-híbrida (Z250XT) e 40 da resina nanoparticulada (Z350XT). Após a análise da cor inicial e da rugosidade inicial, 10 discos de cada resina foram imersos em saliva artificial (Controle, pH=6,4), suco de laranja (pH= 3,4), refrigerante de limão (pH=2,9) e vinho tinto (pH=3,1), por 4 horas por dia (37ºC) durante 30 dias. Após, foram realizadas as leituras finais de cor e rugosidade. Os dados obtidos para a estabilidade de cor foram analisados pelo Teste de Kruskal-Wallis, seguido pelo Teste de Dunn (α=5%). Para a análise da rugosidade foi utilizado o Teste t para amostras pareadas (α=5%). O manchamento provocado pela saliva artificial, suco de laranja e refrigerante foi similar, mas foi estatisticamente diferente do manchamento produzido pelo vinho, em ambas as resinas testadas. O vinho produziu o mesmo grau de manchamento nas resinas micro-híbrida e nanoparticulada. Foi observado que o suco de laranja, o refrigerante e o vinho promoveram aumento da rugosidade superficial dos discos de resina. Diante disso, concluiu-se que o vinho alterou a cor de resinas compostas micro-híbrida e nanoparticulada, e que a rugosidade superficial dos discos de resina foi alterada por todas as bebidas utilizadas. (AU).

Composite resin is the most used restorative material. Despite its clinical success, it is susceptible to changes in its physical properties when exposed to the oral environment. The aim was to evaluate the influence of acidic beverages on the color stability and on the surface roughness of the nanofilled and micro hybrid composite. Forty discs (6.0mm x 2.0mm) of the micro hybrid composite (Z250XT) and 40 of the nanofilled composite (Z350XT) were manufactured. After the measurement of the initial color and the initial roughness, 10 discs of each composite were individually immersed in artificial saliva (control, pH = 6.4), orange juice (pH=3.4), lime soda (pH = 2.9) and red wine (pH = 3.1) during 4 hours per day at 37°C for 30 days. At the end of the experiment, the final analysis of color and surface roughness were performed. The data obtained for the color stability were analyzed by Kruskal-Wallis and Dunn's test (α= 5%). For the analysis of the surface roughness, the t test for related samples was used (α= 5%). The color changes promoted by artificial saliva, orange juice and soda were similar, but they were statistically different from staining produced by wine, in both tested composites. Wine produced the same degree of staining in both composites. Orange juice, soda and red wine increased the surface roughness of the composite discs. It was concluded that red wine significantly changes the color of micro hybrid and nanofilled composites. Furthermore, all beverages increased the surface roughness of the composites tested in the study herein. (AU).

Effects of a bleaching agent on properties of commercial glass-ionomer cements.

OBJECTIVES: This study evaluated the effects of a bleaching agent on the composition, mechanical properties, and surface topography of 6 conventional glass-ionomer cements (GICs) and one resin-modified GIC. MATERIALS AND METHODS: For 3 days, the specimens were subjected to three 20-minute applications of a 37% H2O2-based bleaching agent and evaluated for water uptake (WTK), weight loss (WL), compressive strength (CS), and Knoop hardness number (KHN). Changes in surface topography and chemical element distribution were also analyzed by energy-dispersive X-ray spectroscopy and scanning electron microscopy. For statistical evaluation, the Kruskal-Wallis and Wilcoxon paired tests (α = 0.05) were used to evaluate WTK and WL. CS specimens were subjected to 2-way analysis of variance (ANOVA) and the Tukey post hoc test (α = 0.05), and KH was evaluated by one-way ANOVA, the Holm-Sidak post hoc test (α = 0.05), and the t-test for independent samples (α = 0.05). RESULTS: The bleaching agent increased the WTK of Maxxion R, but did not affect the WL of any GICs. It had various effects on the CS, KHN, surface topography, and the chemical element distribution of the GICs. CONCLUSIONS: The bleaching agent with 37% H2O2 affected the mechanical and surface properties of GICs. The extent of the changes seemed to be dependent on exposure time and cement composition.

Tratamento de lesão de mancha branca com infiltrante resinoso: relato de caso / Resin infiltration of enamel white spot lesion: a case report

O diagnóstico precoce de lesões de mancha branca no esmalte dental permite que um tratamento não invasivo seja indicado para a remineralização das lesões ativas. O objetivo deste trabalho foi relatar um caso clínico onde foi utilizado um infiltrante resinoso para o tratamento não invasivo de uma lesão de mancha branca do esmalte dental. Foi selecionado um paciente com 14 anos de idade, do sexo masculino, leucoderma, com boa saúde geral, de alto risco à cárie, que apresentava lesão de mancha branca no incisivo central superior direito. Devido ao aspecto rugoso e opaco da lesão, optou-se pela realização do tratamento do dente com uma resina infiltrante (Icon®, DMG, Hamburg, Alemanha). Inicialmente foram realizadas fotografias intraorais e radiografia do dente acometido para fins de documentação do caso e futuras comparações. Em seguida, o dente recebeu profilaxia e posterior tratamento pela técnica da resina infiltrante, de acordo com as instruções do fabricante. Para a verificação da efetividade do procedimento, o paciente foi avaliado imediatamente e após 2 meses da conclusão do tratamento. Concluiu-se que a técnica da resina infiltrante de baixa viscosidade para o tratamento da lesão de mancha branca do dente 11 foi satisfatória, pois foi capaz de promover a paralização da doença e o mascaramento da lesão de mancha branca naquele dente.

The early diagnosis of enamel white spot lesions allows adopting a non-invasive treatment to remineralize active lesions. The objective of this study was to report a case where an infiltrant composite was used to treat enamel white spot lesion. A Caucasian 14- year-old male patient, with overall good health, and high-risk for dental caries was selected. He presented white spot lesion in the upper right central incisor. Due to the rough and opaque appearance of the lesion, the treatment with an infiltrant resin (Icon®, DMG, Hamburg, Germany) was chosen. Initially, intraoral photos and x-ray of the affected tooth have been were taken for documentation purposes and future comparisons. Then, the tooth was cleaned and treated with the infiltrant resin following the manufacturer's instructions. To verify the effectiveness of the procedure, the patient was assessed immediately and 2 months after treatment. In conclusion, the technique of low-viscosity infiltrant resin was satisfactory because it was able to impair the progression of the disease and to camouflage the white spot lesion on that tooth.

Streptococcus mutans in Umbilical Cord Blood, Peripheral Blood, and Saliva from Healthy Mothers.

The aims of this study were to analyze the presence of Streptococcus mutans (SM)-DNA in cord blood (CB), maternal peripheral blood (PB), and maternal saliva (SA) and compare with data collected in health surveys. Sixty-four healthy women with pregnancies to term and without complications attending for elective cesarean section in the Clinical Hospital of Ribeirao Preto, Sao Paulo were included. Samples of PB and unstimulated SA were obtained on the day of hospitalization and samples of CB were collected after the delivery section. Samples were investigated using polymerase chain reaction for the presence of SM-DNA using specific primers. The results show over 50% of the sample of PB and CB showed SM-DNA detectable. There was a positive correlation between the SM detection in PB/CB and SA (P < 0.05). Pregnant women, who reported tooth brushing more than three times a day, often showed detectable SM-DNA in PB and CB (P < 0.05). In conclusion, the majority of children can have contact with SM-DNA during the intrauterine life by the CB. SM probably transferred from salivary habitat to PB and CB. The tooth brushing can be associated to S. mutans detection in blood samples.

Analysis of colostrum IgA against bacteria involved in neonatal infections.

OBJECTIVE: To describe e compare the specificity of IgA antibodies against bacteria extract of Klebsiella pneumoniae , Staphylococcus aureus , Escherichia coli , and Salmonella enteritidis . METHODS: Colostrum samples were aseptically collected in the first 12 hours after C-section delivery. The specificity of IgA against bacteria extracts was analyzed by the Western blot. RESULTS: The findings showed proteins of high molecular weight frequently detectable in the samples. S. aureus was the most frequently found bacterium in the samples (p<0.05). Approximately 93.8, 56.3, 62.5 and 60.4% of samples presented IgA reactive to S. aureus , K. pneumoniae , S. enteritidis, and E. coli, respectively. Roughly 40% of samples showed no IgA reactive to K. pneumoniae, S. enteritidis and E. coli . CONCLUSION: Clinical evidence of the importance of breastfeeding for the immune protection of neonates was consistent with the observed immunological findings, since most samples showed IgA reactive against the species tested. The application and development of immunotherapies during pregnancy, focused on frequently detected antigens, could be an important tool to enhance the presence of IgA in colostrum.

Analysis of colostrum IgA against bacteria involved in neonatal infections / Análise de IgA do colostro contra bactérias envolvidas em infecções neonatais

ABSTRACT Objective To describe e compare the specificity of IgA antibodies against bacteria extract of Klebsiella pneumoniae , Staphylococcus aureus , Escherichia coli , and Salmonella enteritidis . Methods Colostrum samples were aseptically collected in the first 12 hours after C-section delivery. The specificity of IgA against bacteria extracts was analyzed by the Western blot. Results The findings showed proteins of high molecular weight frequently detectable in the samples. S. aureus was the most frequently found bacterium in the samples (p<0.05). Approximately 93.8, 56.3, 62.5 and 60.4% of samples presented IgA reactive to S. aureus , K. pneumoniae , S. enteritidis, and E. coli, respectively. Roughly 40% of samples showed no IgA reactive to K. pneumoniae, S. enteritidis and E. coli . Conclusion Clinical evidence of the importance of breastfeeding for the immune protection of neonates was consistent with the observed immunological findings, since most samples showed IgA reactive against the species tested. The application and development of immunotherapies during pregnancy, focused on frequently detected antigens, could be an important tool to enhance the presence of IgA in colostrum.

RESUMO Objetivo Descrever e comparar a especificidade de anticorpos IgA de amostras de colostro contra extratos bacterianos de Klebsiella pneumoniae , Staphylococcus aureus , Escherichia coli e Salmonella enteritidis . Métodos As amostras de colostro foram coletadas assepticamente nas primeiras 12 horas após o nascimento por cesariana. A especificidade de IgA contra extratos de bactérias foi analisada por Western blot. Resultados Os achados mostraram proteínas de alto peso molecular frequentemente detectáveis nas amostras. S. aureus foi a bactéria mais encontrada nas amostras (p<0,05). Cerca de 93,8, 56,3, 62,5 e 60,4% das amostras apresentaram IgA reativa a S. aureus , K. pneumoniae , S. enteritidis e E. coli , respectivamente. Aproximadamente 40% das amostras não apresentaram IgA reativa contra K. pneumoniae , S. enteritidis e E. coli. Conclusão A evidência clínica da importância da amamentação para proteção imunológica ao recém-nascido foi consistente com os achados imunológicos observados, uma vez que a maioria das amostras mostrou IgA reativa contra as espécies testadas. A aplicação e o desenvolvimento de imunoterapias durante a gestação, focada nos antígenos frequentemente detectados, poderiam ser importantes instrumentos para aumentar a presença de IgA no colostro.

Comparisons of IgA response in saliva and colostrum against oral streptococci species.

The present study compared IgA specificity against oral streptococci in colostrum and saliva samples. Sixty-two mother-and-child pairs were included; samples of colostrum (C) and saliva (MS) were collected from the mothers and saliva samples were collected from babies (BS). The specificity of IgA against Streptococcus mutans and S. mitis were analyzed by western blot. Only 30% of babies' samples presented IgA reactivity to S. mutans, while 74 and 80% of MS and C, respectively, presented this response. IgA reactivity to S. mutans virulence antigens (Ag I/II, Gtf and GbpB) in positive samples showed differences between samples for Gtf and especially for GbpB (p < 0.05), but responses to Ag I/II were similar (p > 0.05). The positive response of Gtf-reactive IgA was different between C (90%) and MS (58%) samples (p < 0.05), but did not differ from BS (p > 0.05). GbpB was the least detected, with 48 and 26% of C and MS, and only 5% of BS samples presenting reactivity (p > 0.05). Eight percent of MS and C samples presented identical bands to SM in the same time-point. In conclusion, the differences of IgA response found between C and MS can be due to the different ways of stimulation, proliferation and transportation of IgA in those secretions. The colostrum has high levels of IgA against S. mutans virulence antigens, which could affect the installation and accumulation process of S. mutans, mainly by supplying anti-GbpB IgA to the neonate.

Comparisons of IgA response in saliva and colostrum against oral streptococci species

Abstract The present study compared IgA specificity against oral streptococci in colostrum and saliva samples. Sixty-two mother-and-child pairs were included; samples of colostrum (C) and saliva (MS) were collected from the mothers and saliva samples were collected from babies (BS). The specificity of IgA against Streptococcus mutans and S. mitis were analyzed by western blot. Only 30% of babies’ samples presented IgA reactivity to S. mutans, while 74 and 80% of MS and C, respectively, presented this response. IgA reactivity to S. mutans virulence antigens (Ag I/II, Gtf and GbpB) in positive samples showed differences between samples for Gtf and especially for GbpB (p < 0.05), but responses to Ag I/II were similar (p > 0.05). The positive response of Gtf-reactive IgA was different between C (90%) and MS (58%) samples (p < 0.05), but did not differ from BS (p > 0.05). GbpB was the least detected, with 48 and 26% of C and MS, and only 5% of BS samples presenting reactivity (p > 0.05). Eight percent of MS and C samples presented identical bands to SM in the same time-point. In conclusion, the differences of IgA response found between C and MS can be due to the different ways of stimulation, proliferation and transportation of IgA in those secretions. The colostrum has high levels of IgA against S. mutans virulence antigens, which could affect the installation and accumulation process of S. mutans, mainly by supplying anti-GbpB IgA to the neonate.

Effects of different desensitizing treatments on root dentin permeability.

The objective of this study was to evaluate the effects of diode laser and a desensitizing dentifrice on dentin permeability. Fifty-two root dentin fragments were obtained (5 × 5mm) and treated with 24% EDTA gel. The samples were divided into 4 groups (n = 13): G1, control (no treatment); G2, diode laser (λ = 908 nm, 1.5 W, continuous mode, 20s); G3, application of abrasive dentifrice for 1 minute (Elmex Sensitive Professional (International Gaba); and G4, application of abrasive dentifrice for 1 minute followed by irradiation with diode laser. Ten samples per group were immersed in 2% methylene blue solution for 4h. The specimens were washed, longitudinally sectioned, observed under optical microscopy, photographed and assessed based on the degree of dye leakage. The remaining samples were observed under scanning electron microscopy (SEM). The leakage data were subjected to ANOVA test, followed by Tukey's t-test (α = 5%). Groups 2, 3 and 4 showed less dye penetration than the control group (p < 0.05), but were similar among each other. SEM images showed that dentinal tubules were open in G1, and fused and occluded in G2. Group 3 showed dentinal tubules that were occluded by the metal ions from the toothpaste. G4 presented similar characteristics to G3, and the presence of fused dentin. The diode laser and the dentifrice were effective in reducing dentinal permeability, and the combination of the two treatments did not show better results than either one used alone.