DNA nanotechnology for nucleic acid analysis: sensing of nucleic acids with DNA junction-probes.

DNA nanotechnology deals with the design of non-naturally occurring DNA nanostructures that can be used in biotechnology, medicine, and diagnostics. In this study, we introduced a nucleic acid five-way junction (5WJ) structure for direct electrochemical analysis of full-length biological RNAs. To the best of our knowledge, this is the first report on the interrogation of such long nucleic acid sequences by hybridization probes attached to a solid support. A hairpin-shaped electrode-bound oligonucleotide hybridizes with three adaptor strands, one of which is labeled with methylene blue (MB). The four strands are combined into a 5WJ structure only in the presence of specific DNA or RNA analytes. Upon interrogation of a full-size 16S rRNA in the total RNA sample, the electrode-bound MB-labeled 5WJ association produces a higher signal-to-noise ratio than electrochemical nucleic acid biosensors of alternative design. This advantage was attributed to the favorable geometry on the 5WJ nanostructure formed on the electrode's surface. The 5WJ biosensor is a cost-efficient alternative to the traditional electrochemical biosensors for the analysis of nucleic acids due to the universal nature of both the electrode-bound and MB-labeled DNA components.

Single-tube isothermal label-free fluorescent sensor for pathogen detection based on genetic signatures.

We report on a single-tube biosensor for real-time detection of bacterial pathogens with multiplex capabilities. The biosensor consists of two DNA probes, which bind to the complementary fragment of a bacterial RNA to form a three-way junction (3WJ) nucleic acid structure. One of the probes encodes a fluorescent light-up RNA aptamer under T7 promoter. It allows for generation of multiple aptamer copies due to elongation and transcription of the 3WJ structure in the presence of the complementary target. The aptamer coordinates and thereby enhances fluorescence of a cognate fluorogenic dye, allowing for fluorescent detection of the RNA target. Multiple aptamer copies can be produced from a single target-dependent 3WJ structure allowing for amplification and visual observation of the signal. The limit of detection depended on the assay time and was found to be 1.7 nM or 0.6 nM for 30-min or 60-min assay, respectively, when N-methylmesoporphyrin IX (NMM) was used as a fluorescent indicator. The sensor is excellent in analyzing folded RNA targets and differentiating between closely related sequences due to the multicomponent character of the target-interrogating probe. Response to unamplified samples of total bacterial RNA from Mycobacterium tuberculosis complex or Escherichia coli was observed with excellent selectivity within 30 min under isothermal conditions at 50°C in a one-tube one-step assay. Several bacterial species can be detected in multiplex by utilizing biosensors with the template strands encoding different light-up aptamers. The isothermal one-tube-one-step format of the assay and the possibility to monitor the signal visually makes it amenable to use in a point-of-care scenario.

Starch-Coated Magnetic Iron Oxide Nanoparticles for Affinity Purification of Recombinant Proteins.

Starch-coated magnetic iron oxide nanoparticles have been synthesized by a simple, fast, and cost-effective co-precipitation method with cornstarch as a stabilizing agent. The structural and magnetic characteristics of the synthesized material have been studied by transmission electron microscopy, Mössbauer spectroscopy, and vibrating sample magnetometry. The nature of bonds between ferrihydrite nanoparticles and a starch shell has been examined by Fourier transform infrared spectroscopy. The data on the magnetic response of the prepared composite particles have been obtained by magnetic measurements. The determined magnetic characteristics make the synthesized material a good candidate for use in magnetic separation. Starch-coated magnetic iron oxide nanoparticles have been tested as an affinity sorbent for one-step purification of several recombinant proteins (cardiac troponin I, survivin, and melanoma inhibitory activity protein) bearing the maltose-binding protein as an auxiliary fragment. It has been shown that, due to the highly specific binding of this fragment to the starch shell, the target fusion protein is selectively immobilized on magnetic nanoparticles and eluted with the maltose solution. The excellent efficiency of column-free purification, high binding capacity of the sorbent (100-500 µg of a recombinant protein per milligram of starch-coated magnetic iron oxide nanoparticles), and reusability of the obtained material have been demonstrated.

Split light up aptamers as a probing tool for nucleic acids.

Aptamers that bind non-fluorescent dyes and increase their fluorescence can be converted to fluorescent sensors. Here, we discuss and provide guidance for the design of split (binary) light up aptameric sensors (SLAS) for nucleic acid analysis. SLAS consist of two RNA or DNA strands and a fluorogenic organic dye added as a buffer component. The two strands hybridize to the analyzed DNA or RNA sequence and form a dye-binding pocket, followed by dye binding, and increase in its fluorescence. SLAS can detect nucleic acids in a cost-efficient label-free format since it does not require conjugation of organic dyes with nucleic acids. SLAS design is preferable over monolith fluorescent sensors due to simpler assay optimization and improved selectivity. RNA-based SLAS can be expressed in cells and used for intracellular monitoring and imaging biological molecules.

Biogenic Ferrihydrite Nanoparticles: Synthesis, Properties In Vitro and In Vivo Testing and the Concentration Effect.

Biogenic ferrihydrite nanoparticles were synthesized as a result of the cultivation of Klebsiella oxytoca microorganisms. The distribution of nanoparticles in the body of laboratory animals and the physical properties of the nanoparticles were studied. The synthesized ferrihydrite nanoparticles are superparamagnetic at room temperature, and the characteristic blocking temperature is 23-25 K. The uncompensated moment of ferrihydrite particles was determined to be approximately 200 Bohr magnetons. In vitro testing of different concentrations of ferrihydrite nanoparticles for the functional activity of neutrophilic granulocytes by the chemiluminescence method showed an increase in the release of primary oxygen radicals by blood phagocytes when exposed to a minimum concentration and a decrease in secondary radicals when exposed to a maximum concentration. In vivo testing of ferrihydrite nanoparticles on Wister rats showed that a suspension of ferrihydrite nanoparticles has chronic toxicity, since it causes morphological changes in organs, mainly in the spleen, which are characterized by the accumulation of hemosiderin nanoparticles (stained blue according to Perls). Ferrihydrite can also directly or indirectly stimulate the proliferation and intracellular regeneration of hepatocytes. The partial detection of Perls-positive cells in the liver and kidneys can be explained by the rapid elimination from organs and the high dispersion of the nanomaterial. Thus, it is necessary to carry out studies of these processes at the systemic level, since the introduction of nanoparticles into the body is characterized by adaptive-proliferative processes, accompanied by the development of cell dystrophy and tension of the phagocytic system.

Promiscuous dye binding by a light-up aptamer: application for label-free multi-wavelength biosensing.

Light-up DNA aptamers are promising label-free signal-transducers for biosensing applications due to their high chemical stability and low synthetic cost. Herein, we demonstrate that a dapoxyl DNA aptamer DAP-10-42 can be converted into a sensor generating a fluorescence signal at different wavelengths in the range of 500-660 nm depending on the dye that is present. This results from the discovered promiscuity of DAP-10-42 in binding fluorogenic dyes including arylmethane dyes. We have designed a split DAP-10-42 aptasensor for the detection of a katG gene fragment from Mycobacterium tuberculosis with a point mutation causing isoniazid resistance. Efficient interrogation of the gene fragment after nucleic acid sequence-based amplification (NASBA) is achieved directly in a protein-containing NASBA sample. This report lays a foundation for the application of the DAP-10-42 aptamer as a versatile sensing platform.

Interrogation of highly structured RNA with multicomponent deoxyribozyme probes at ambient temperatures.

Molecular analysis of RNA through hybridization with sequence-specific probes is challenging due to the intrinsic ability of RNA molecules to form stable secondary and tertiary structures. To overcome the energy barrier toward the probe-RNA complex formation, the probes are made of artificial nucleotides, which are more expensive than their natural counterparts and may still be inefficient. Here, we propose the use of a multicomponent probe based on an RNA-cleaving deoxyribozyme for the analysis of highly structured RNA targets. Efficient interrogation of two native RNA from Saccharomyces cerevisiae-a transfer RNA (tRNA) and 18S ribosomal RNA (rRNA)-was achieved at ambient temperature. We achieved detection limits of tRNA down to ∼0.3 nM, which is two orders of magnitude lower than that previously reported for molecular beacon probes. Importantly, no probe annealing to the target was required, with the hybridization assay performed at 37°C. Excess of nonspecific targets did not compromise the performance of the probe, and high interrogation efficiency was maintained by the probes even in complex matrices, such as cell lysate. A linear dynamic range of 0.3-150 nM tRNA was demonstrated. The probe can be adapted for differentiation of a single mismatch in the tRNA-probe complex. Therefore, this study opens a venue toward highly selective, sensitive, robust, and inexpensive assays for the interrogation of biological RNA.

Cascade of deoxyribozymes for the colorimetric analysis of drug resistance in Mycobacterium tuberculosis.

A visual cascade detection system has been applied to the detection and analysis of drug-resistance profile of Mycobacterium tuberculosis complex (MTC), a causative agent of tuberculosis. The cascade system utilizes highly selective split RNA-cleaving deoxyribozyme (sDz) sensors. When activated by a complementary nucleic acid, sDz releases the peroxidase-like deoxyribozyme apoenzyme, which, in complex with a hemin cofactor, catalyzes the color change of the sample's solution. The excellent selectivity of the cascade has allowed for the detection of point mutations in the sequences of the MTC rpoB, katG, and gyrA genes, which are responsible for resistance to rifampin, isoniazid, and fluoroquinolone, respectively. When combined with isothermal nucleic acid sequence based amplification (NASBA), the assay was able to detect amplicons of 16S rRNA and katG mRNA generated from 0.1 pg and 10 pg total RNA taken for NASBA, respectively, in less than 2 h, producing a signal detectable with the naked eye. The proposed assay may become a prototype for point-of-care diagnosis of drug resistant bacteria with visual signal output.

Toward a Rational Approach to Design Split G-Quadruplex Probes.

Hybridization probes have become an indispensable tool for nucleic acid analysis. Systematic efforts in probe optimization resulted in their improved binding affinity, turn-on ratios, and ability to discriminate single nucleotide substitutions (SNSs). The use of split (or multicomponent) probes is a promising strategy to improve probe selectivity and enable an analysis of folded analytes. Here, we developed criteria for the rational design of a split G-quadruplex (G4) peroxidase-like deoxyribozyme (sPDz) probe that provides a visual output signal. The sPDz probe consists of two DNA strands that hybridize to the abutting positions of a DNA/RNA target and form a G4 structure catalyzing, in the presence of a hemin cofactor, H2O2-mediated oxidation of organic compounds into their colored oxidation products. We have demonstrated that probe design becomes complicated in the case of target sequences containing clusters (two or more) of cytosine residues and developed strategies to overcome the challenges to achieving high signal-to-noise and excellent SNS discrimination. Specifically, to improve selectivity, a conformational constraint that stabilizes the probe's dissociated state is beneficial. If the signal intensity is compromised, introduction of flexible non-nucleotide linkers between the G4-forming and target-recognizing elements of the probe helps to decrease the steric hindrance for G4 PDz formation observed as a signal increase. Varying the modes of G4 core splitting is another instrument for the optimal sPDz design. The suggested algorithm was successfully utilized for the design of the sPDz probe interrogating a fragment of the Influenza A virus genome (subtype H1N1), which can be of practical use for flu diagnostics and surveillance.

Selective Determination of Isothermally Amplified Zika Virus RNA Using a Universal DNA-Hairpin Probe in Less than 1 Hour.

The recent outbreak of the Zika virus (ZIKV) in the Americas and multiple studies that linked the virus to the cases of microcephaly and neurological complications have revealed the need for cost efficient and rapid ZIKV diagnostics tests. Here, a diagnostic platform relying on a four-way junction (4WJ)-based biosensor with electrochemical readout using a Universal DNA-Hairpin (UDH) probe for the selective recognition of an isothermally amplified ZIKV RNA fragment is developed. The 4WJ structure utilizes an electrode-immobilized stem-loop (DNA-hairpin) probe and two DNA adaptor strands complementary to both the stem-loop probe and the targeted fragment of a ZIKV amplicon. One of the adaptor strands is responsible for high selectivity of the target recognition, while another helps unwinding the target secondary structure. The first adaptor strand contains a redox label methylene blue to trigger the current change in response to the target-dependent formation of the 4WJ structure on the surface of the electrode. The amplicon can be analyzed directly from the amplification sample without the need for its purification. The proposed diagnostic methodology exhibits the limit of ZIKV RNA detection of 1.11 fg/µL (∼0.3 fM) and high selectivity that allows for reliable discrimination of ZIKV from West Nile virus and four dengue virus serotypes. Overall, the analysis of ZIKV RNA can be completed in less than 1 h, including amplification and electrochemical detection.

Label-Free Pathogen Detection by a Deoxyribozyme Cascade with Visual Signal Readout.

A colorimetric nucleic acid based test for label-free pathogen detection has been developed and used for the detection of the Zika virus. The test relies on nucleic acid sequence-based amplification (NASBA) of a viral RNA followed by interrogation of the amplicon by a cascade of deoxyribozymes constituting a visual split deoxyribozyme (vsDz) probe. The probe consists of a split phosphodiesterase deoxyribozyme, which forms its catalytic core upon binding to a specific amplicon fragment. The catalytically active complex recognizes and cleaves an inhibited peroxidase-like deoxyribozyme (PDz), thereby activating it. Active PDz catalyzes hydrogen peroxide-mediated oxidation of a colorless substrate into a colored product, thereby generating a visible signal. Viral RNA (106 copies/mL or higher) triggers intense color within 2 hr. The test selectively differentiates between Zika and closely related dengue and West Nile viruses. The reported technology combines isothermal amplification and visual detection and therefore represents a basis for the future development of a cost-efficient and instrument-free method for point-of-care nucleic acid analysis.

Split Dapoxyl Aptamer for Sequence-Selective Analysis of Nucleic Acid Sequence Based Amplification Amplicons.

Hybridization probes have been used for the detection of single nucleotide variations (SNV) in DNA and RNA sequences in the mix-and-read formats. Among the most conventional are Taqman probes, which require expensive quantitative polymerase chain reaction (qPCR) instruments with melting capabilities. More affordable isothermal amplification format requires hybridization probes that can selectively detect SNVs isothermally. Here we designed a split DNA aptamer (SDA) hybridization probe based on a recently reported DNA sequence that binds a dapoxyl dye and increases its fluorescence ( Kato, T.; Shimada, I.; Kimura, R.; Hyuga, M., Light-up fluorophore-DNA aptamer pair for label-free turn-on aptamer sensors. Chem. Commun. 2016 , 52 , 4041 - 4044 ). SDA uses two DNA strands that have low affinity to the dapoxyl dye unless hybridized to abutting positions at a specific analyte and form a dye-binding site, which is accompanied by up to a 120-fold increase in fluorescence. SDA differentiates SNV in the  inhA gene of Mycobacterium tuberculosis at ambient temperatures and detects a conserved region of the Zika virus after isothermal nucleic acid sequence based amplification (NASBA) reaction. The approach reported here can be used for detection of isothermal amplification products in the mix-and-read format as an alternative to qPCR.

Species Typing of Nontuberculous Mycobacteria by Use of Deoxyribozyme Sensors.

BACKGROUND: Nontuberculous mycobacteria (NTM) species are a rising threat, especially to patients living with pulmonary comorbidities. Current point-of-care diagnostics fail to adequately identify and differentiate NTM species from Mycobacterium tuberculosis (Mtb). Definitive culture- and molecular-based testing can take weeks to months and requires sending samples out to specialized diagnostic laboratories. METHODS: In this proof-of-concept study, we developed an assay based on PCR amplification of 16S ribosomal RNA (rRNA) rrs genes by using universal mycobacterial primers and interrogation of the amplified fragments with a panel of binary deoxyribozyme (BiDz) sensors to enable species-level identification of NTM (BiDz-NTMST). Each BiDz sensor consists of 2 subunits of an RNA-cleaving deoxyribozyme, which form an active deoxyribozyme catalytic core only in the presence of the complimentary target sequence. The target-activated BiDz catalyzes cleavage of a reporter substrate, thus triggering either fluorescent or colorimetric (visually observed) signal depending on the substrate used. The panel included BiDz sensors for differentiation of 6 clinically relevant NTM species (Mycobacterium abscessus, Mycobacterium avium, Mycobacterium intracellulare, Mycobacterium fortuitum, Mycobacterium kansasii, and Mycobacterium gordonae) and Mtb. RESULTS: Using the fluorescent BiDz-NTMST assay, we successfully identified the species of 38 clinical isolates. In addition, a subset of strains was tested with visual BiDz sensors, providing proof-of-concept for species typing of NTM by the naked eye. CONCLUSIONS: The BiDz-NTMST assay is a novel platform for rapid identification of NTM species. This method is highly specific and significantly faster than current tools and is easily adaptable for onsite diagnostic laboratories in hospitals or clinical laboratories.

Alphanumerical Visual Display Made of DNA Logic Gates for Drug Susceptibility Testing of Pathogens.

Molecular diagnostics of drug-resistant pathogens require the analysis of point mutations in bacterial or viral genomes, which is usually performed by trained professionals and/or by sophisticated computer algorithms. We have developed a DNA-based logic system that autonomously analyzes mutations found in the genome of Mycobacterium tuberculosis complex (MTC) bacteria and communicates the output to a human user as alphanumeric characters read by the naked eye. The five-gate system displays "O" ("no infection") for the absence of MTC infection and "P" or "F" for passing or failing a drug-susceptibility test, respectively.

Multiplex detection of extensively drug resistant tuberculosis using binary deoxyribozyme sensors.

Current diagnostic tools for Mycobacterium tuberculosis (Mtb) have many disadvantages including low sensitivity, slow turnaround times, or high cost. Accurate, easy to use, and inexpensive point of care molecular diagnostic tests are urgently needed for the analysis of multidrug resistant (MDR) and extensively drug resistant (XDR) Mtb strains that emerge globally as a public health threat. In this study, we established proof-of-concept for a novel diagnostic platform (TB-DzT) for Mtb detection and the identification of drug resistant mutants using binary deoxyribozyme sensors (BiDz). TB-DzT combines a multiplex PCR with single nucleotide polymorphism (SNP) detection using highly selective BiDz sensors targeting loci associated with species typing and resistance to rifampin, isoniazid and fluoroquinolone antibiotics. Using the TB-DzT assay, we demonstrated accurate detection of Mtb and 5 mutations associated with resistance to three anti-TB drugs in clinical isolates. The assay also enables detection of a minority population of drug resistant Mtb, a clinically relevant scenario referred to as heteroresistance. Additionally, we show that TB-DzT can detect the presence of unknown mutations at target loci using combinatorial BiDz sensors. This diagnostic platform provides the foundation for the development of cost-effective, accurate and sensitive alternatives for molecular diagnostics of MDR- and XDR-TB.

DNA Antenna Tile-Associated Deoxyribozyme Sensor with Improved Sensitivity.

Some natural enzymes increase the rate of diffusion-limited reactions by facilitating substrate flow to their active sites. Inspired by this natural phenomenon, we developed a strategy for efficient substrate delivery to a deoxyribozyme (DZ) catalytic sensor. This resulted in a three- to fourfold increase in sensitivity and up to a ninefold improvement in the detection limit. The reported strategy can be used to enhance catalytic efficiency of diffusion-limited enzymes and to improve sensitivity of enzyme-based biosensors.

Towards a DNA Nanoprocessor: Reusable Tile-Integrated DNA Circuits.

Modern electronic microprocessors use semiconductor logic gates organized on a silicon chip to enable efficient inter-gate communication. Here, arrays of communicating DNA logic gates integrated on a single DNA tile were designed and used to process nucleic acid inputs in a reusable format. Our results lay the foundation for the development of a DNA nanoprocessor, a small and biocompatible device capable of performing complex analyses of DNA and RNA inputs.

Time course of large ribosomal subunit assembly in E. coli cells overexpressing a helicase inactive DbpA protein.

DbpA is a DEAD-box RNA helicase implicated in Escherichia coli large ribosomal subunit assembly. Previous studies have shown that when the ATPase and helicase inactive DbpA construct, R331A, is expressed in E. coli cells, a large ribosomal subunit intermediate accumulates. The large subunit intermediate migrates as a 45S particle in a sucrose gradient. Here, using a number of structural and fluorescent assays, we investigate the ribosome profiles of cells lacking wild-type DbpA and overexpressing the R331A DbpA construct. Our data show that in addition to the 45S particle previously described, 27S and 35S particles are also present in the ribosome profiles of cells overexpressing R331A DbpA. The 27S, 35S, and 45S independently convert to the 50S subunit, suggesting that ribosome assembly in the presence of R331A and the absence of wild-type DbpA occurs via multiple pathways.

Expedited quantification of mutant ribosomal RNA by binary deoxyribozyme (BiDz) sensors.

Mutations in ribosomal RNA (rRNA) have traditionally been detected by the primer extension assay, which is a tedious and multistage procedure. Here, we describe a simple and straightforward fluorescence assay based on binary deoxyribozyme (BiDz) sensors. The assay uses two short DNA oligonucleotides that hybridize specifically to adjacent fragments of rRNA, one of which contains a mutation site. This hybridization results in the formation of a deoxyribozyme catalytic core that produces the fluorescent signal and amplifies it due to multiple rounds of catalytic action. This assay enables us to expedite semi-quantification of mutant rRNA content in cell cultures starting from whole cells, which provides information useful for optimization of culture preparation prior to ribosome isolation. The method requires less than a microliter of a standard Escherichia coli cell culture and decreases analysis time from several days (for primer extension assay) to 1.5 h with hands-on time of ∼10 min. It is sensitive to single-nucleotide mutations. The new assay simplifies the preliminary analysis of RNA samples and cells in molecular biology and cloning experiments and is promising in other applications where fast detection/quantification of specific RNA is required.

Bridging the Two Worlds: A Universal Interface between Enzymatic and DNA Computing Systems.

Molecular computing based on enzymes or nucleic acids has attracted a great deal of attention due to the perspectives of controlling living systems in the way we control electronic computers. Enzyme-based computational systems can respond to a great variety of small molecule inputs. They have the advantage of signal amplification and highly specific recognition. DNA computing systems are most often controlled by oligonucleotide inputs/outputs and are capable of sophisticated computing as well as controlling gene expressions. Here, we developed an interface that enables communication of otherwise incompatible nucleic-acid and enzyme-computational systems. The enzymatic system processes small molecules as inputs and produces NADH as an output. The NADH output triggers electrochemical release of an oligonucleotide, which is accepted by a DNA computational system as an input. This interface is universal because the enzymatic and DNA computing systems are independent of each other in composition and complexity.