Patient Specific Implants for Orbital Reconstruction in the Treatment of Silent Sinus Syndrome: Two Case Reports.

Silent sinus syndrome is a rare disorder characterized by ipsilateral enophthalmos and hypoglobus following a collapse of the orbital floor, in the presence of asymptomatic long-term maxillary sinusitis. It results in enophthalmos, hypoglobus and deepening of the superior palpebral sulcus. A standardized treatment protocol for this infrequent syndrome has not yet been established. The management includes restoration of maxillary sinus ventilation with functional endoscopic sinus surgery and orbital reconstruction, either concurrently or separately. In this paper, the authors presented two patients successfully treated with patient-specific implants, and intraoperative navigation. These cases highlight the benefit of computer-assisted planning and titanium patient-specific implants in the management of silent sinus syndrome. To the best of our knowledge, this is the first report that described the use of PSI with titanium spacers performed with the aid of intraoperative navigation for SSS treatment. Advantages, drawbacks of this technique and treatment alternatives currently available in the literature were also discussed.

Accuracy of intraoperative navigation for orbital fracture repair: A retrospective morphometric analysis.

In this retrospective case series, patients undergoing surgery to treat isolated orbital floor fractures were morphometrically analyzed. Cloud Compare was used to compare mesh positioning with a virtual plan, using the distance-to-nearest-neighbor method. To assess the accuracy of mesh positioning, a mesh area percentage (MAP) parameter was introduced and three distance ranges were defined as the outcome measures: the 'high-accuracy range' included MAPs at a distance of 0-1 mm from the preoperative plan; the 'intermediate-accuracy range' included MAPs at a distance of 1.1-2 mm from the preoperative plan; the 'low-accuracy range' included MAPs at a distance of >2 mm from the preoperative plan. To complete the study, morphometric analysis of the results was combined with clinical judgment ('excellent', 'good', or 'poor') of mesh positioning by two independent blind observers. In total, 73 of 137 orbital fractures met the inclusion criteria. In the 'high-accuracy range' the mean, minimum, and maximum MAP values were 64%, 22%, and 90%, respectively. In the 'intermediate-accuracy range', the mean, minimum, and maximum values were 24%, 10%, and 42%, respectively. In the 'low-accuracy range', the values were 12%, 1%, and 48%, respectively. Both observers classified 24 cases of mesh positioning as 'excellent', 34 as 'good', and 12 as 'poor'. Within the limitations of the study, it seems that virtual surgical planning and intraoperative navigation has the potential to add quality to the repair of the orbital floor and, therefore, should be taken into consideration whenever appropriate.

Pediatric mandibular fractures: Surgical management and outcomes in the deciduous, mixed and permanent dentitions.

BACKGROUND/AIM: Mandibular fractures are the most frequent type of pediatric facial traumatic injury, but their treatment remains controversial. The aim of this retrospective study was to analyze the surgical treatment and long-term outcomes of dentate mandibular fractures in children and adolescents. MATERIAL AND METHODS: Patients with mandibular fractures in the dentate area who were surgically treated in the period from January 1, 2001, to December 31, 2020, were included. The following data were collected: age, gender, cause and mechanism of injury, fracture site and type, associated maxillofacial fractures, the timing of surgical treatment, Facial Injury Severity Scale (FISS) score, surgical approach, number and thickness of plates, hospitalization stay and outcome. Patients were divided into three groups: deciduous (≤6 years, group A), mixed (7-12 years, group B), and permanent (13-18 years, group C) dentitions. Statistical analyses were performed using SPSS software. RESULTS: During the study 91 patients (male: female ratio, 3.8:1), 4 in group A, 12 in group B, and 75 in group C, with 65 single and 52 double fractures were included. An intraoral approach was used in 87% of patients. In group C, 90% of patients were treated with fixation schemes consistent with those suggested in the literature for adults, versus 75% in groups A and B. Median follow-up time was 20 months. No tooth germ injury or facial asymmetry was observed and only six group C patients had post-operative malocclusions. Hardware removal occurred in 22% of the patients. CONCLUSIONS: This 20-year retrospective study shows that open reduction and internal fixation of pediatric dentate mandibular fractures caused no tooth germ damage or disturbances of mandibular growth in any dentition stage. Internal fixation schemes were similar to those used for adults, although it was necessary to adapt hardware size and position according to tooth and patient age.

The ESTMJS (European Society of Temporomandibular Joint Surgeons) Consensus and Evidence-Based Recommendations on Management of Condylar Dislocation.

Although condylar dislocation is not uncommon, terminology, diagnostics, and treatment concepts vary considerably worldwide. This study aims to present a consensus recommendation based on systematically reviewed literature and approved by the European Society of TMJ Surgeons (ESTMJS). Based on the template of the evidence-based German guideline (register # 007-063) the ESTMJS members voted on 30 draft recommendations regarding terminology, diagnostics, and treatment initially via a blinded modified Delphi procedure. After unblinding, a discussion and voting followed, using a structured consensus process in 2019. An independent moderator documented and evaluated voting results and alterations from the original draft. Although the results of the preliminary voting were very heterogenous and differed significantly from the German S3 guideline (p < 0.0005), a strong consensus was achieved in the final voting on terminology, diagnostics, and treatment. In this voting, multiple alterations, including adding and discarding recommendations, led to 24 final recommendations on assessment and management of TMJ dislocation. To our knowledge, the ESTMJS condylar dislocation recommendations are the first both evidence and consensus-based international recommendations in the field of TMJ surgery. We recommend they form the basis for clinical practice guidelines for the management of dislocations of the mandibular condyle.

Osteochondroma of the mandibular condyle: Indications for different surgical methods: A case series of 7 patients.

The aim of this study was to evaluate and discuss the long-term outcomes of patients with condylar osteochondroma managed through 3 different surgical techniques. Seven patients with condylar osteochondroma treated in the author's department from May 2012 to January 2019 were included in this retrospective study. Clinical evaluations (visual analogue scale for TMJ pain, jaw function, symmetry, and quality of life), maximum interincisal opening (MIO) and radiological findings were collected pre- and postoperatively. Other parameters assessed included tumour size and location; complications and follow-up. Radical condylectomy with immediate total joint alloplastic reconstruction was performed in 4 patients, local excision in 2 patients and low condylectomy with concomitant orthognathic surgery in 1 patient. During an average follow-up period of 40,8 months no clinical or radiographic signs of recurrence were found. Average MIO increased from 25,5mm to 39,5mm at the longest follow up, and all clinical evaluations were greatly improved. In conclusion, the described surgical techniques appear valuable in the treatment of condylar osteochondroma. Local excision is indicated in tumor involving less than half the surface of the condylar head; radical condylectomy with immediate alloplastic total joint reconstruction is indicated in gigantic lesion compromising the anatomical components and function of the joint. Orthognathic surgery procedures should be combined with tumor resection when correction of associated dentofacial deformities is indicated.

Three-Dimensional Evaluation of Soft Tissue Malar Modifications after Zygomatic Valgization Osteotomy via Geometrical Descriptors.

Patients with severe facial deformities present serious dysfunctionalities along with an unsatisfactory aesthetic facial appearance. Several methods have been proposed to specifically plan the interventions on the patient's needs, but none of these seem to achieve a sufficient level of accuracy in predicting the resulting facial appearance. In this context, a deep knowledge of what occurs in the face after bony movements in specific surgeries would give the possibility to develop more reliable systems. This study aims to propose a novel 3D approach for the evaluation of soft tissue zygomatic modifications after zygomatic osteotomy; geometrical descriptors usually involved in face analysis tasks, i.e., face recognition and facial expression recognition, are here applied to soft tissue malar region to detect changes in surface shape. As ground truth for zygomatic changes, a zygomatic openness angular measure is adopted. The results show a high sensibility of geometrical descriptors in detecting shape modification of the facial surface, outperforming the results obtained from the angular evaluation.

Virtual planning and CAD/CAM-assisted distraction for maxillary hypoplasia in cleft lip and palate patients: Accuracy evaluation and clinical outcome.

The aim of this prospective study was to report the experience with a specific guided distraction protocol for the treatment of CLP patients with severe midface hypoplasia. From January 2016 to April 2019, six consecutive, non-growing, CLP patients with maxillary hypoplasia underwent a specific distraction protocol based on the use of VSP, CAD/CAM-generated surgical splints, cutting guides, prebent internal maxillary distractors, early removal of distractors, and acute callus manipulation and fixation. STL files for VSP, using multislice CT scans taken preoperatively (T0) and 3 months after distractor removal (T1) were superimposed using the free software 3D Slicer and Geomagic Wrap to evaluate the accuracy of maxillary repositioning and assess 3D bone changes. Clinical outcome was evaluated at the 1-year follow-up (T2). The patients and surgeon were satisfied with the occlusal and aesthetic outcomes. A maximum difference of 2 mm between the VSP and the actual surgical outcome was chosen as the success criterion for accuracy. The average linear difference for selected points was <2 mm in four patients and >2 mm in two patients. The average distance of the postoperative maxilla from the VSP model was 2.28 mm (median 1.85), while the average forward movement of the maxilla was 10.18 mm The protocol used is effective and accurate in the correction of severe maxillary hypoplasia in CLP patients. Early removal of the distractor and stabilization with plates reduces patient discomfort and does not jeopardize stability. This protocol should be reserved for complex cases due to the costs of the procedure, which are not negligible.

Malar augmentation with zygomatic osteotomy in orthognatic surgery: Bone and soft tissue changes threedimensional evaluation.

BACKGROUND: The aim of this prospective study is to objectively assess 3D soft tissue and bone changes of the malar region by using the malar valgization osteotomy in concomitant association with orthognatic surgery. MATERIALS AND METHODS: From January 2015 to January 2018, 10 patients who underwent single stage bilateral malar valgization osteotomy in conjunction with maxillo-mandibular orthognatic procedures for aesthetic and functional correction were evaluated. Clinical and surgical reports were collected and patient satisfaction was evaluated with a VAS score. For each patient, maxillofacial CT-scans were collected 1 month preoperatively (T0) and 6 months after the operation (T1). DICOM data were imported and elaborated in the software MatLab, which creates a 3D soft tissue model of the face. 3D Bone changes were assessed importing DICOM data into iPlan (BrainLAB 3.0) software and the superimposition process was achieved using autofusion. Descriptive statistical analyses were obtained for soft tissue and bone changes. RESULTS: Considering bone assessment the comparison by superimposition between T0 and T1 showed an increase of the distance between bilateral malar prominence (Pr - Pl) and a slight forward movement (87,65 ± 1,55 to 97,60 ± 5,91); p-value 0.007. All of the patients had improvement of α angle, ranging from 36,30 ± 1,70 to 38,45 ± 0,55, p-value 0,04 (αr) and 36,75 ± 1,58 to 38,45 ± 0,35; p-value 0,04 (αl). The distance S increased from 78,05 ± 2,48 to 84,2 ± 1,20; p-value 0,04 (Sr) and 78,65 ± 2,16 to 82,60 ± 0,90 (Sl); p-value 0,03. Considering the soft tissue, the comparison by superimposition between T0 and T1 showed an antero-lateral movement (p-value 0.008 NVL; p-value 0.001 NVR) of the malar bone projection together with an increase in width measurements (p-value 0,05 VL; p-value 0,01 VR). Angular measurement confirmed the pattern of the bony changes (p-value 0.034 αL; p-value 0,05 αR). CONCLUSION: The malar valgization osteotomy in conjunction with orthognatic surgery is effective in improving zygomatic projection contributing to a balanced facial correction in midface hypoplasia.3D geometrical based volume and surface analysis demonstrate an increase in transversal and forward direction. The osteotomy can be safely performed in conjunction with orthognatic procedures.

The Shape of Things to Come: In-Hospital Three-Dimensional Printing for Mandibular Reconstruction Using Fibula Free Flap.

OBJECTIVES/HYPOTHESIS: The aim of this study was to explore whether the production of in-hospital, low-cost surgical cutting guides would be possible and to assess different cutting guide shapes to facilitate the surgery and the application with instruments. STUDY DESIGN: Cohort study. METHODS: Using free computer-aided design software, surgical cutting guides for the mandible and fibula were designed and used to perform virtual segmental osteotomies and fibula transplants in seven patients. RESULTS: Fourteen virtual osteotomies were performed using the free software and the proposed workflow. Thirteen guides were then printed to transfer the virtual planning information to the operating room. CONCLUSIONS: Virtual planning and the three-dimensional (3D) printing of guides for mandibular reconstruction is reliable with the aid of an in-hospital 3D laboratory. We also demonstrated that different guides with different shapes could be produced with benefits during surgery. LEVEL OF EVIDENCE: 4 Laryngoscope, 2020.

Surgical Treatment of Massive Teratoma of the Orbit.

Orbital location of teratoma is extremely rare. The differential diagnosis can be difficult and they may be mistaken for other tumors as they may have both cystic and solid areas. The authors report a case of a 7-day-old neonate with a massive congenital orbital teratoma in which it was decided to apply a surgical technique that involves the aspiration of the cystic fluid, the subsequent infusion of fibrin glue, and the radical excision. The definitive histological examination reported a diagnosis of trifillic cystic teratoma. At fourth year of follow up the patient is free from disease.

Surgical Management of the Peripheral Osteoma of the Zygomatic Arch: A Case Report and Literature Review.

An osteoma is a benign, slow-growing, osteogenic neoplasm with a low recurrence rate that is typically characterized by the proliferation of a compact or cancellous bone. It can be peripheral, central, or extraskeletal. Usually asymptomatic, peripheral osteomas in the maxillofacial region commonly arise in the paranasal sinuses and mandible and rarely occur in the zygomatic arch, with only six previously documented cases in the literature. Here, we present the management of a solitary peripheral osteoma of the right zygomatic arch in a 72-year-old woman and a review of the literature.

Non-extraction and multiloop edgewise technique versus orthognathic surgery and fixed appliance in adult class II patients: a cephalometric comparative study.

BACKGROUND: An alternative approach to surgery for treating class II adult borderline patients is the non-extraction and multiloop edgewise archwire (MEAW) technique. The aim of the present study is to compare dentoskeletal effects of the orthognathic surgery with the MEAW technique. METHODS: Thirteen adults (ten women, three men; mean age, 27.8 years) were consecutively treated using the MEAW approach. The control group was made of 13 adults (nine women, four men; mean age, 26.2 years) treated by orthognathic surgery and the multibracket appliance before and after surgery. Lateral headfilms before and after all the treatments were traced for linear and angular measurements, and data were blindly analyzed. ANOVA was conducted to compare any difference over time between the two treatments. Differences over time for each variable, separately for surgery and MEAW, were assessed by Wilcoxon test. RESULTS: No significant differences between the two groups were detected at baseline. Both treatments were effective in correcting dental discrepancies. A significant difference over time between the two treatments was found in several cephalometric measurements. CONCLUSIONS: Considering the limits of the present sample the following conclusion emerged: in the MEAW group, the malocclusion correction was predominantly dentoalveolar, and a significant profile change was observed. Significant skeletal and occlusal plane changes were obtained with the orthognathic surgery approach.

Evaluation of the Accuracy of Virtual Planning in Orthognathic Surgery: A Morphometric Study.

BACKGROUND: The purpose of this study was to prospectively test the accuracy of computer-aided orthognathic surgery comparing the virtual surgical planning with the three-dimensional (3D) outcome. METHODS: Patients that underwent computer-assisted orthognathic surgery were retrospectively evaluated. The postoperative results were compared with the surgical plan, superimposing the postoperative computed tomography (CT) scan onto the virtual plan. Surface-based superimpositioning of the postoperative CT scan onto the 3D preoperative plan was carried out to visualize the discrepancy between preoperative virtual plan and postoperative 3D CT result. RESULTS: A total of 17 consecutive patients that underwent two-jaw computer-assisted orthognathic surgery were enrolled in the study.The average linear differences for selected points were <1 mm in 12 patients out of 17. In 5 patients out of 17, the average differences for selected points were <2 mm. CONCLUSIONS: An overall high degree of accuracy between the virtual plan and the postoperative result was found.

Management of atrophic mandibular fractures: An Italian multicentric retrospective study.

PURPOSE: The aim of this multicentric study was to retrospectively evaluate the surgical outcome of atrophic mandible fractures treated with open reduction and rigid fixation (ORIF), using load-bearing plates. MATERIALS AND METHODS: 55 patients from three trauma centers were retrieved for the study. Inclusion criteria were: edentulous patients with mandibular body fractures; mandibular body thickness <20 mm. Collected data included: cause of fracture; degree of atrophy (according to Luhr's classification); characteristics of the fracture; adequacy of reduction; postoperative complications. All patients were treated with ORIF, using 2.0 mm, large-profile, locking bone plates and 2.4 mm locking bone plates. No bone graft was used in any case. RESULTS: 12 patients were classified as class I atrophy, 18 patients as class II, and 25 patients as class III. Mean mandibular height at the site of fracture was 12.8 mm (ranging from 5.4 mm to 20 mm). 22 were unilateral fractures and 23 were bilateral. Mild displacement was observed in 11 fractures, moderate in 34, severe in 16, and comminution was present in seven fractures. Adequacy of reduction was judged good in 62 fractures and poor in six fractures. Transient weakness of the marginal branch of the facial nerve was recorded in 11 patients and permanent weakness in two patients. All patients achieved a complete fracture healing. CONCLUSION: External open reduction and rigid fixation (ORIF) with locking, load-bearing plates is a reliable and predictable treatment for atrophic edentulous mandible fracture. Immediate bone grafting should not be considered mandatory unless there is consistent bone loss.

Temporomandibular joint reconstruction with stock and custom-made devices: Indications and results of a 14-year experience.

PURPOSE: Temporomandibular joint (TMJ) reconstruction with alloplastic implants is a reliable, safe and effective treatment option for selected debilitating pathologies of the TMJ. This study retrospectively analyzes our 14-year experience in total alloplastic reconstruction of the TMJ using stock and custom Biomet prostheses. Indications, results and rationale for the choice of stock and custom-made devices are discussed. MATERIAL AND METHODS: Patients were enrolled in the study who underwent single-stage alloplastic total joint replacement from January 2000 to October 2014. The subjective and objective variables were as follows: TMJ pain, diet, jaw function, maximum interincisal opening (MIO), quality of life and occlusion. The minimum follow-up was 12 months. RESULTS: A total of 38 patients (55 joints) met the inclusion criteria and were enrolled in the study. Of the patients, 25 underwent Biomet total joint reconstruction system with stock prosthesis, 12 patients underwent total joint reconstruction system with custom made (patient matched) prosthesis, and 1 patient underwent bilateral total joint reconstruction using stock system on one side and custom system on the other side. The following adverse events and complications were recorded: bleeding, 2 cases; malocclusion, 1 case; postoperative infection with prosthesis removal, 1 case; heterotopic bone formation, 1 case; and contralateral TMJ overload in unilateral cases, 1 case. The occlusion was habitual unchanged in 29 of 38 cases. In 1 patient occlusion worsened with less stable functional contact. The patient refused postoperative orthodontic treatment. In 8 patients, a concomitant orthognatic procedure was planned in order to improve the occlusion. In all these patients, the occlusion improved. Quality of life and MIO relevantly improved in all cases. CONCLUSIONS: This study supports the use of total joint reconstruction for end-stage TMJ disease. Both stock and custom implants allow consistent results, but there are precise indications for the use of custom implants.

Facial Mobility after Maxilla-Mandibular Advancement in Patients with Severe Obstructive Sleep Apnea Syndrome: A Three-Dimensional Study.

Introduction. The functional results of surgery in terms of facial mobility are key elements in the treatment of patients. Little is actually known about changes in facial mobility following surgical treatment with maxillomandibular advancement (MMA). Objectives. The three-dimensional (3D) methods study of basic facial movements in typical OSAS patients treated with MMA was the topic of the present research. Materials and Methods. Ten patients affected by severe obstructive sleep apnea syndrome (OSAS) were engaged for the study. Their facial surface data was acquired using a 3D laser scanner one week before (T1) and 12 months after (T2) orthognathic surgery. The facial movements were frowning, grimace, smiling, and lip purse. They were described in terms of surface and landmark displacements (mm). The mean landmark displacement was calculated for right and left sides of the face, at T1 and at T2. Results. One year after surgery, facial movements were similar to presurgical registrations. No modifications of symmetry were present. Conclusions. Despite the skeletal maxilla-mandible expansion, orthognathic surgical treatment (MMA) of OSAS patients does not seem to modify facial mobility. Only an enhancement of amplitude in smiling and knitting brows was observed. These results could have reliable medical and surgical applications.

Comparison of the Outcomes of Complex Orbital Fracture Repair with and without a Surgical Navigation System: A Prospective Cohort Study with Historical Controls.

BACKGROUND: In severe orbital fractures, restoration of orbital shape and volume is required to avoid diplopia and posttraumatic enophthalmos. The purpose of this study was to compare outcomes between navigation-aided and conventional techniques for complex unilateral orbital fractures using titanium mesh. METHODS: The outcomes and the computed tomography-measured orbital volume of two groups of orbital complex unilateral reconstruction cases were compared. The study group consisted of a consecutive cohort of unilateral severe orbital fracture that underwent surgery with the aid of a Brainlab navigation system. A historical control group was composed of consecutive operations performed immediately before the beginning of navigation system use. A total of 55 operations were then identified and studied for patient characteristics, diplopia and globe position, preoperative and postoperative orbital volumes, complications, need for revision surgery, and the surgeon's performance. RESULTS: Postoperative diplopia severity was lower in the study group than in the control group. Orbital volume analysis showed that reconstructed orbital volume in the study group was closer to unaffected orbital volume compared with the control group. Significant orbital volume reduction in the reconstructed orbit could be achieved in the study group, and there was no significant reduction in the control group compared with the unaffected side. The globe projection was higher compared with the preoperative situation in the study group than in the control group. The navigational platform could also contribute to reduce the learning curve. CONCLUSION: This study demonstrated that computer-assisted techniques improve outcomes compared with conventional techniques. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, III.

Soft, hard-tissues and pharyngeal airway volume changes following maxillomandibular transverse osteodistraction: Computed tomography and three-dimensional laser scanner evaluation.

INTRODUCTION: Maxillomandibular transverse osteodistraction (MMTOD) is an alternative approach to the traditional treatment for transverse maxillary and mandibular deficiencies and crowding. The aim was to report soft and hard-tissues changes and airway volume variation. METHODS: In this study, skeletally mature, non-syndromic patients with transverse maxillary and mandibular hypoplasia, who underwent a MMTOD between 2010 and 2012, were included. Surgical changes were analysed using clinical evaluation, three-dimensional facial surface data and computed tomography analysis before (T0) and after the completion of post-op orthodontic treatment (T1). RESULTS: Nineteen patients (eight males and eleven females; average age: 26.3 years) were enrolled. MMTOD produces facial changes in the cheek, paranasal areas, nasal base and chin. Facial changes are mostly explained by the underlying skeletal movements, which are essentially represented by the transverse enlargement of both the maxilla and the mandible. Following MMTOD, the airway volume and the lateral dimension of the cross-sectional airway increased significantly. CONCLUSIONS: MMTOD is a technique that allows an increase in airway volume and in both maxillary and mandibular arch perimeters simultaneously by increasing skeletal width. Facial appearance is improved and a stable occlusion is obtained.