Precise Fabrication and Manipulation of Individual Polymer Nanofibers.

Polymer nanofibers hold promise in a wide range of applications owing to their diverse properties, flexibility, and cost effectiveness. In this study, we introduce a polymer nanofiber drawing process in a scanning electron microscope and focused ion beam (SEM/FIB) instrument with in situ observation. We employed a nanometer-sharp tungsten needle and prepolymer microcapsules to enable nanofiber drawing in a vacuum environment. This method produces individual polymer nanofibers with diameters as small as ∼500 nm and lengths extending to millimeters, yielding nanofibers with an aspect ratio of 2000:1. The attachment to the tungsten manipulator ensures accurate transfer of the polymer nanofiber to diverse substrate types as well as fabrication of assembled structures. Our findings provide valuable insights into ultrafine polymer fiber drawing, paving the way for high-precision manipulation and assembly of polymer nanofibers.

The status of immunization program and challenges in Ethiopia: A mixed method study.

Introduction: Immunization helps reduce morbidity and mortality attributable to severe vaccine-preventable childhood illnesses. However, vaccination coverage and the quality of immunization data remain challenging in Ethiopia. This has led to poor planning, suboptimal vaccination coverage, and the resurgence of vaccine-preventable disease outbreaks in under-immunized pocket areas. The problem is further compounded by the occurrence of the COVID-19 pandemic and the disruption of the health information system due to recurrent conflict. This study assessed the current status of the immunization service and its challenges in Ethiopia. Methods: A mixed-methods study was conducted in three regions of Ethiopia from 21 to 31 May, 2023. A survey of administrative reports was done in a total of 69 health facilities in 14 woredas (districts). Nine KIIs were conducted at a district level among immunization coordinators selected from three regions to explore the challenges of the immunization program. Linear regression and descriptive statistics were used to analyze the quantitative data. Thematic analysis was applied to analyze the qualitative data. The findings from the qualitative data were triangulated to supplement the quantitative results. Result: Two-thirds (66.4%) of the children were fully vaccinated, having received all vaccines, including the first dose of the MCV1, by 12 months of age, as reported through administrative reports collected from health facility records. Catchment area population size and region were significantly associated with the number of fully immunized children (p < 0.001 and p = 0.005, respectively). The vaccination dropout rates of the first to third dose of pentavalent vaccine and the first dose of pentavalent vaccine to the first dose of MCV1 were 8.6% and 7.4%, respectively. A considerable proportion of health facilities lack accurate data to calculate vaccination coverage, while most of them lack accurate data for dropout rates. Longer waiting time, interruptions in vaccine supply or shortage, inaccessibility of health facilities, internal conflict and displacement, power interruption and refrigerator breakdown, poor counseling practice, and caretakers' lack of awareness, fear of side effects, and forgetfulness were the reasons for the dropout rate and low coverage. The result also showed that internal conflict and displacement have significantly affected immunization coverage, with the worst effects seen on the most marginalized populations. Conclusion: The study revealed low vaccination coverage, a high dropout rate, and poor quality of immunization data. Access and vaccination coverage among marginalized community groups (e.g., orphans and street children) were also low. Hence, interventions to address organizational, behavioral, technical, and contextual (conflict and the resulting internal displacement) bottlenecks affecting the immunization program should be addressed.

Highly Conductive and Permeable Nanocomposite Ultrafiltration Membranes Using Laser-Reduced Graphene Oxide.

Electrically conductive membranes are a promising avenue to reduce water treatment costs due to their ability to minimize the detrimental impact of fouling, to degrade contaminants, and to provide other additional benefits during filtration. Here, we demonstrate the facile and low-cost fabrication of electrically conductive membranes using laser-reduced graphene oxide (GO). In this method, GO is filtered onto a poly(ether sulfone) membrane support before being pyrolyzed via laser into a conductive film. Laser-reduced GO composite membranes are shown to be equally as permeable to water as the underlying membrane support and possess sheet resistances as low as 209 Ω/□. Application of the laser-reduced GO membranes is demonstrated through greater than 97% removal of a surrogate water contaminant, 25 µM methyl orange dye, with an 8 V applied potential. Furthermore, we show that laser-reduced GO membranes can be further tuned with the addition of p-phenylenediamine binding molecules to decrease the sheet resistance to 54 Ω/□.

Laser-Induced Graphene from Polyimide and Polyethersulfone Precursors as a Sensing Electrode in Anodic Stripping Voltammetry.

The need to reduce and eliminate exposure to the toxic contaminant lead (Pb) from drinking water calls for advances in cheap and low-footprint sensing technologies such as stripping voltammetry. This study examines the performance of laser-induced graphene (LIG) electrodes from polyimide (PI) and polyethersulfone (PES) precursors in anodic stripping voltammetry of Pb(II). Despite their similar electrochemical properties and conductivity, as characterized by electrochemical impedance spectroscopy and two-point conductivity, respectively, subtle differences in physical and chemical properties, as measured by scanning electron microscopy and X-ray photoelectron spectroscopy, respectively, lead to PI-LIG electrodes exhibiting higher sensitivity than PES-LIG electrodes. Enhanced electrochemical activity of the PES-LIG electrodes for side reactions due to sulfur substitutions could potentially account for the difference in performance. The results of this study highlight that the starting material can heavily determine the performance of electrodes formed via laser-induced graphitization for sensing and other electrochemical applications.

Preserving nanoscale features in polymers during laser induced graphene formation using sequential infiltration synthesis.

Direct lasing of polymeric membranes to form laser induced graphene (LIG) offers a scalable and potentially cheaper alternative for the fabrication of electrically conductive membranes. However, the high temperatures induced during lasing can deform the substrate polymer, altering existing micro- and nanosized features that are crucial for a membrane's performance. Here, we demonstrate how sequential infiltration synthesis (SIS) of alumina, a simple solvent-free process, stabilizes polyethersulfone (PES) membranes against deformation above the polymers' glass transition temperature, enabling the formation of LIG without any changes to the membrane's underlying pore structure. These membranes are shown to have comparable sheet resistance to carbon-nanotube-composite membranes. They are electrochemically stable and maintain their permeability after lasing, demonstrating their competitive performance as electrically conductive membranes. These results demonstrate the immense versatility of SIS for modifying materials when combined with laser induced graphitization for a variety of applications.

Natural Carbon By-Products for Transparent Heaters: The Case of Steam-Cracker Tar.

Steam-cracker tar (SCT) is a by-product of ethylene production that is in massive quantities globally (>150 × 106 tons per year). With few useful applications, the production of unwanted SCT leads to the need for its costly disposal or burning at the boiler plant. The discovery of new uses for SCT would therefore bring both economic and environmental benefits, although, to date, efforts toward employing SCT in diverse applications have been limited, and progress is further hampered by a lack of understanding of the material itself. Although complex and highly heterogeneous in nature, the molecular composition of SCT has the potential to serve as a diverse and tunable feedstock for wide-ranging applications. Here, a simple solution-processing method for SCT that allows its conductivity and optical properties to be controlled over orders of magnitude is reported. Here, by way of example, the focus is on the production of transparent conductive thin films, which exhibit a wide range of transparencies (23-93%) and sheet resistances (2.5 Ω â–¡-1 to 1.2 kΩ â–¡-1 ) that are tuned by a combination of solution concentration and thermal annealing. As transparent Joule heaters, even without optimization, these SCT devices show competitive performance compared to established technologies such as those based on reduced graphene oxide, and surpass the temperature stability limit of other materials. Furthermore, it is demonstrated that laser annealing can be used to process the SCT films and directly pattern transparent heaters on an arbitrary substrate. These results highlight the potential of SCT as a feedstock material for electronic applications and suggest that broader classes of either naturally occurring carbon or produced carbonaceous by-products could prove useful in a range of applications.

In Situ Healing of Compromised Membranes via Polyethylenimine-Functionalized Silica Microparticles.

Microscale damages to membranes used in large-scale filtration processes for water treatment can result in severe degradation of product water quality. One promising technology to address this issue is in situ healing of compromised membranes via healing agents that are added to the feed side of a membrane system and seal the defect site because of increased hydraulic drag through damage site during filtration. We herein introduce an improved in situ membrane healing method using amine-functionalized silica microparticles that is effective under varying operating conditions, overcoming limitations faced by previous healing agents such as chitosan agglomerates. The silica microparticles are functionalized with branched polyethylenimine (PEI) molecules for efficient interparticle cross-linking with glutaraldehyde. The PEI-decorated silica microparticles (SiO2@PEI MPs) were characterized using scanning electron microscopy, dynamic light scattering, and zeta potential analysis. This study investigates the selective deposition of the SiO2@PEI MPs on the damage area using confocal laser scanning microscopy under variable cross-flow rate (0.5-2.0 L/min) and flushing time (10 to 30 min) conditions. The in situ healing technique recovered the particle rejection of compromised membranes to 99.1% of the original membrane's performance without any flux decline. The results of this study show that the use of SiO2@PEI MPs is a promising and practical approach to ensure membrane process integrity.

Self-Healing Hydrogel Pore-Filled Water Filtration Membranes.

Damages to water filtration membranes during installation and operation are known to cause detrimental loss of the product water quality. Membranes that have the ability to self-heal would recover their original rejection levels autonomously, bypassing the need for costly integrity monitoring and membrane replacement practices. Herein, we fabricated hydrogel pore-filled membranes via in situ graft polymerization of 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) onto microporous poly(ether sulfone) (PES) substrates and successfully demonstrated their self-healing ability. Covalent attachment of the hydrogel to the substrate was essential for stable membrane performance. The membranes autonomously restore their particle rejection up to 99% from rejection levels as low as 30% after being physically damaged. We attribute the observed self-healing property to swelling of the pore-filling hydrogel into the damage site, strong hydrogen bonding, and molecular interdiffusion. The results of this study show that hydrogel pore-filled membranes are a promising new class of materials for fabricating self-healing membranes.