Cathodic Deposition-Assisted Synthesis of Thin Glass MOF Films for High-Performance Gas Separations.

Glass metal-organic framework (MOF) films can be fabricated from their crystalline counterparts through a melt-quenching process and are prospective candidates for gas separation because of the elimination of the grain boundaries in crystalline MOF films. However, current techniques are limited to producing glass MOF films with a thickness of tens of micrometers, which leads to ultralow gas permeances. Here, we report a novel cathodic deposition-assisted synthesis of glass ZIF-62 films with a thickness as low as ~1 µm. Electrochemical analyses and deposition experiments suggest that the cathodic deposition can lead to pure crystalline ZIF-62 films with a controllable thickness of ~2 µm to ~15 µm. Accordingly, glass ZIF-62 films with a thickness of ~1 µm to ~10 µm can be obtained after a thermal treatment. The fabricated defect-free glass ZIF-62 film measuring 2 µm in thickness shows a remarkable CO2/N2 and CO2/CH4 selectivity of 31.4 and 33.4, respectively, with a CO2 permeance which is over 30 times higher than the best-performing glass ZIF-62 films in literature.

Fluorine-free organic electrolytes for the stable electrodeposition of neodymium metal.

Electrowinning is regarded as a clean process to recover neodymium metal from secondary sources such as spent Nd-Fe-B permanent magnets, but the current methods are severely limited by a high energy consumption (molten salts), or by the high costs and environmental impact of the electrolyte components (ionic liquids). Therefore, there is a demand for more sustainable electrowinning methods for the recovery of neodymium metal. Inspired by our own previous work and the work of others, we developed new fluorine-free organic electrolytes that enable the electrodeposition of neodymium metal at room temperature. The electrolytes consist of solvated neodymium borohydride, Nd(BH4)3, dissolved in the ether solvents tetrahydrofuran (THF), 2-methyltetrahydrofuran (2-MeTHF), 1,2-dimethoxyethane (DME) and diethylene glycol dimethyl ether (diglyme, G2), and these complexes can be prepared entirely from non-fluorinated precursors such as neodymium(III) chloride (NdCl3) and sodium borohydride (NaBH4). In contrast to our previous bis(trifluoromethylsulfonyl)imide-containing electrolytes, electrodeposition of neodymium proceeds over time without significant loss of current density, indicating a higher stability against unwanted side-reactions that lead to passivation of the deposit on the electrode. Characterization of the deposits by scanning electron microscopy (SEM), energy-dispersive X-ray fluorescence (EDX), and X-ray photoelectron spectroscopy (XPS) unambiguously indicated the presence of neodymium metal.

Electrodeposition of neodymium and dysprosium from organic electrolytes.

A new class of organic electrolytes has been developed for the electrodeposition of rare-earth metals at room temperature. These electrolytes consist of a rare-earth bis(trifluoromethylsulfonyl)imide or chloride salt and a borohydride salt, dissolved in the ether solvents 1,2-dimethoxyethane or 2-methyltetrahydrofuran. In these electrolytes, a soluble lanthanide(iii) borohydride complex [Ln(BH4)4]- is formed, which allows for the electrodeposition of neodymium- or dysprosium-containing layers. The electrochemistry of these electrolytes was characterized by cyclic voltammetry. The deposits were characterized by scanning electron microscopy (SEM), energy-dispersive X-ray fluorescence (EDX) and X-ray photoelectron spectroscopy (XPS), and the results suggest the presence of metallic neodymium and dysprosium.

Physicochemical study of diethylmethylammonium methanesulfonate under anhydrous conditions.

The protic ionic liquid diethylmethylammonium methanesulfonate ([DEMA][OMs]) was analyzed in depth by differential scanning calorimetry (DSC), nuclear magnetic resonance (NMR) spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, Raman spectroscopy, and broadband dielectric spectroscopy (BDS) under anhydrous conditions. Karl Fischer titration, NMR, and FT-IR spectra confirmed the high purity of [DEMA][OMs]. The melting point (37.7 °C) and the freezing point (14.0 °C) obtained by DSC agree well with the values determined by BDS (40.0 °C and 14.0 °C). The dc conductivity (σdc) above the melting/freezing point obeys the Vogel-Fulcher-Tammann (VFT) equation well, and thus, the proton conduction in [DEMA][OMs] is assumed to be dominated by the vehicle mechanism. In contrast, the σdc below the melting/freezing point can be fitted by the Arrhenius equation separately, and therefore, the proton conduction is most likely governed by the proton hopping mechanism. The non-negligible influence of previously reported low water content on the physicochemical properties of [DEMA][OMs] is found, indicating the importance of reducing water content as much as possible for the study of "intrinsic" properties of protic ionic liquids.

Enhancing the solubility of 1,4-diaminoanthraquinones in electrolytes for organic redox flow batteries through molecular modification.

1,4-Diaminoanthraquinones (DAAQs) are a promising class of redox-active molecules for use in nonaqueous redox flow batteries (RFBs) because they can have up to five electrochemically accessible and reversible oxidation states. However, most of the commercially available DAAQs have a low solubility in the polar organic solvents that are typically used in RFBs, in particular when supporting electrolyte salts are present. This significantly limits the energy densities that can be achieved. We have functionalized the amino groups in the DAAQ structure with three types of chains, namely alkyl chains, cationic alkyl chains and oligoethylene glycol ether chains, and measured the solubility of these derivatives in various organic solvents by quantitative UV-Vis absorption spectroscopy. The DAAQ derivatives with higher polarity exhibit a significantly higher solubility in commonly used organic electrolytes in comparison to apolar derivatives. Cyclic voltammetry was used to assess the viability of the DAAQs as redox-active species for RFBs. Although the cationic DAAQ derivatives have an enhanced solubility in the electrolytes, the cathodic redox reactions have a poor reversibility, most likely due to an internal decomposition reaction of their reduced forms. The oligoethylene-glycol-ether-functionalized DAAQs are the most promising compounds for use in organic RFB electrolytes because they have the optimal combination of high solubility and a high reversibility of the redox couples.

Reversible electrodeposition and stripping of magnesium from solvate ionic liquid-tetrabutylammonium chloride mixtures.

The physicochemical properties of three new magnesium-containing solvate ionic liquids are reported. The solvation structures were analysed by Raman spectroscopy, revealing a solvent separated ion pair structure at room temperature. The reversible electrodeposition and stripping of magnesium from mixtures of these solvate ionic liquids and tetra-n-butylammonium chloride is described. The electrolytes are significantly less volatile than similar dilute electrolytes, even at elevated temperatures and the deposition current densities exceed 1 A dm-2 at 80 °C. The influence of the chloride concentration on magnesium deposition was studied with cyclic voltammetry and chronopotentiometry. It was found that the stripping of magnesium is governed by two competing reactions, and the addition of tetrabutylammonium chloride to the solvate ionic liquids was necessary to prevent passivation and efficiently strip the deposited magnesium.

Cobalt(ii) liquid metal salts for high current density electrodeposition of cobalt.

Cobalt(ii)-containing ionic liquids were synthesized using N,N-dimethylformamide, N-methylpyrrolidone (NMP), dimethylsulfoxide (DMSO), N,N-dimethylacetamide (DMAc), pyridine-N-oxide (py-O), 1,10-phenanthroline (phen), ethylenediamine (en) and dimethylimidazolidinone (DMI) as ligands. The weakly coordinating bis(trifluoromethylsulfonyl)imide (Tf2N-) was used as a counter anion. Several compounds had a melting temperature below 100 °C, and the compound [Co(DMAc)6][Tf2N]2 was liquid at room temperature, with a viscosity of only 18 mPa s at 80 °C. Several compounds were recrystallized to give high quality single crystals and their crystal structures were determined. EXAFS measurements were performed on [Co(DMAc)6][Tf2N]2 at different temperatures and it was observed that the [Co(DMAc)6]2+ ion partially dissociated at higher temperatures, which explains the temperature-dependent color change (thermochromism). The electrochemical properties of the compounds with the lowest melting points were also investigated. Adherent, crack-free metallic cobalt layers could be electrodeposited from [Co(DMAc)6][Tf2N]2, [Co(DMI)6][Tf2N]2 and [Co(NMP)6][Tf2N]2. From the first two, black deposits consisting of micrometer-sized needles were obtained, whereas the latter resulted in a dull grey cobalt layer consisting of micrometer-sized cobalt spheres. The Co(iii)/Co(ii) redox couple was not found to occur in any compound with an O-donor ligand, but the Co(iii)/Co(ii) redox couple was found to be quasi-reversible for [Co(phen)3][Tf2N]2 dissolved in [BMP][Tf2N].

Solvation Structure of Sodium Bis(fluorosulfonyl)imide-Glyme Solvate Ionic Liquids and Its Influence on Cycling of Na-MNC Cathodes.

Electrolytes consisting of sodium bis(fluorosulfonyl)imide (NaFSI) dissolved in glymes (monoglyme, diglyme, and triglyme) were characterized by FT-Raman spectroscopy and 13C, 17O, and 23Na NMR spectroscopy. The glyme:NaFSI molar ratio was varied from 50:1 to 1:1, and it was observed that, in the dilute electrolytes, the sodium salt is completely dissociated into solvent separated ion pairs (SSIPs). However, contact ion pairs (CIPs) and aggregates (AGGs) become the predominant species in more concentrated solutions. Some of the electrolytes with the highest concentrations can be classified as solvate ionic liquids (SILs), where all of the solvent molecules are coordinated to sodium cations. Therefore, these electrolytes are fundamentally different from more dilute electrolytes which are typically used in commercially available secondary batteries. The melting point or glass transition temperature, dynamic viscosity, density, sodium concentration, and ionic conductivity of these solvate ionic liquids are reported as well as the crystal structures of [Na(G3)][FSI] and [Na(G3)2][FSI]. Galvanostatic cycling experiments were performed in coin-type cells with a Na2/3[Mn0.55Ni0.30Co0.15]O2 cathode to study the influence of these electrolytes on the electrochemical stability and charge/discharge behavior.

Cobalt(ii) containing liquid metal salts for electrodeposition of cobalt and electrochemical nanoparticle formation.

Cobalt(ii)-containing liquid metal salts (LMS) with N-alkylimidazole ligands and bis(trifluoromethanesulfonyl)imide (bistriflimide, Tf2N-) or methanesulfonate (mesylate, OMs-) anions were synthesized and characterized. The chain length of the alkyl side chain on the imidazole ligand was varied. All compounds were characterized using CHN analysis, DSC and FTIR measurements. Single-crystal X-ray diffraction measurements were performed on six of the compounds for which single crystals of good quality could be obtained. All cobalt(ii) centers are six-coordinate with the N-alkylimidazole ligands in an octahedral configuration and the anions are non-coordinating. The same coordination environment was observed by EXAFS measurements on cobalt(ii) liquid metal salts in the liquid state. The electrochemical properties of the compounds with the lowest melting temperatures were investigated using cyclic voltammetry. It was found that part of the current was consumed in the electrodeposition of cobalt, whereas the other part of the current was consumed in the electrochemical formation of cobalt(0) nanoparticles.