Tuning preparation conditions towards optimized separation performance of thermally polymerized organo-silica monolithic columns in capillary liquid chromatography.

Tuning of preparation conditions, such as variations in the amount of a porogen, concentration of an aqueous acid catalyst, and adjustment in polymerization temperature and time, towards optimized chromatographic performance of thermally polymerized monolithic capillaries prepared from 3-(methacryloyloxy)propyltrimethoxysilane has been carried out. Performance of capillary columns in reversed-phase liquid chromatography was assessed utilizing various sets of solutes. Results describing hydrophobicity, steric selectivity, and extent of hydrogen bonding enabled comparison of performance of hybrid monolithic columns prepared under thermal (TSG) and photopolymerized (PSG) conditions. Reduced amounts of porogen in the polymerization mixture, and prolonged reaction times were necessary for the preparation of monolithic columns with enhanced retention and column efficiency that reached to 111,000 plates/m for alkylbenzenes with shorter alkyl chains. Both increased concentration of catalyst and higher temperature resulted in faster polymerization but inevitably in insufficient time for pore formation. Thermally polymerized monoliths produced surfaces, which were slightly more hydrophobic (a methylene selectivity of 1.28±0.002 TSG vs 1.20±0.002 PSG), with reduced number of residual silanols (a caffeine/phenol selectivity of 0.13±0.001 TSG vs 0.17±0.003 PSG). However, steric selectivity of 1.70±0.01 was the same for both types of columns. The batch-to-batch repeatability was better using thermal initiation compared to monolithic columns prepared under photopolymerized conditions. RSD for retention factor of benzene was 3.7% for TSG capillaries (n=42) vs. 6.6% for PSG capillaries (n=18). A similar trend was observed for columns prepared within the same batch.

The two-step mechanochemical synthesis of porphyrins.

Porphyrin synthesis under solvent-free conditions represents the "greening" of a traditional synthesis that normally requires large amounts of organic solvent, and has hindered the industrial-scale synthesis of this useful class of molecules. We have found that the four-fold acid-catalysed condensation of aldehyde and pyrrole to yield a tetra-substituted porphyrin is possible through mechanochemical techniques, without a solvent present. This represents one of the still-rare examples of carbon-carbon bond formation by mechanochemistry. Specifically, upon grinding equimolar amounts of pyrrole and benzaldehyde in the presence of an acid catalyst, cyclization takes place to give reduced porphyrin precursors (reversible), which upon oxidation form tetraphenylporphyrin (TPP). The approach has been found to be suitable for the synthesis of a variety of meso-tetrasubstituted porphyrins. Oxidation can occur either by using an oxidizing agent in solution, to give yields comparable to those published for traditional methods of porphyrin synthesis, or through mechanochemical means resulting in a two-step mechanochemical synthesis to give slightly lower yields that are still being optimized. We are also working on "green" methods of porphyrin isolation, including entrainment sublimation, which would hopefully further reduce the need for large amounts of organic solvent. These results hold promise for the development of mechanochemical synthetic protocols for porphyrins and related classes of compounds.