Sn Substitution in the Lithium Superionic Argyrodite Li6PCh5I (Ch = S and Se).

The lithium argyrodites Li6PS5X (X = Cl, Br, and I) have attracted interest as fast solid ionic conductors for solid-state batteries. Within this class of materials, it has been previously suggested that more polarizable anions and larger substituents should influence the ionic conductivity (e.g., substituting S by Se). Building upon this work, we explore the influence of Sn substitution in lithium argyrodites Li6+xSnxP1-xSe5I in direct comparison to the previously reported Li6+xSnxP1-xS5I series. The (P5+/Sn4+)Se43/4- polyhedral volume, unit cell volume, and lithium coordination tetrahedra Li(48h)-(S/Se)3-I increase with Sn substitution in this new selenide series. Impedance spectroscopy reveals that increasing Sn4+ substitution results in a fivefold improvement in the ionic conductivity when compared to Li6PSe5I. This work provides further understanding of compositional influences for optimizing the ionic conductivity of solid electrolytes.

On the underestimated influence of synthetic conditions in solid ionic conductors.

The development of high-performance inorganic solid electrolytes is central to achieving high-energy- density solid-state batteries. Whereas these solid-state materials are often prepared via classic solid-state syntheses, recent efforts in the community have shown that mechanochemical reactions, solution syntheses, microwave syntheses, and various post-synthetic heat treatment routines can drastically affect the structure and microstructure, and with it, the transport properties of the materials. On the one hand, these are important considerations for the upscaling of a materials processing route for industrial applications and industrial production. On the other hand, it shows that the influence of the different syntheses on the materials' properties is neither well understood fundamentally nor broadly internalized well. Here we aim to review the recent efforts on understanding the influence of the synthetic procedure on the synthesis - (micro)structure - transport correlations in superionic conductors. Our aim is to provide the field of solid-state research a direction for future efforts to better understand current materials properties based on synthetic routes, rather than having an overly simplistic idea of any given composition having an intrinsic conductivity. We hope this review will shed light on the underestimated influence of synthesis on the transport properties of solid electrolytes toward the design of syntheses of future solid electrolytes and help guide industrial efforts of known materials.

Pressure-induced shear and interlayer expansion in Ti3C2 MXene in the presence of water.

Pseudo-negative compressibility in layered materials is a phenomenon typically limited to in situ high-pressure experiments in some clay minerals and carbon-based materials. We show that the MXene Ti3C2T x expands along its crystallographic c direction when compressed in the presence of H2O. This expansive effect occurs when a mixture of powders and excess water is quasi-hydrostatically compressed in a diamond anvil cell; it also occurs to a much larger extent when powders are pressed uniaxially into discs and, notably, persists after pressure is released. We attribute the expansion to the insertion of H2O molecules and have identified shear-induced slipping of the nanosheets comprising multilayered MXene particles as a possible cause of this behavior in the latter case. This both has implications for the processing of MXenes and contributes to the field of materials with pseudo-negative compressibility by adding a new member for further investigation.

NMR reveals the surface functionalisation of Ti3C2 MXene.

(1)H and (19)F NMR experiments have identified and quantified the internal surface terminations of Ti3C2Tx MXene. -F and -OH terminations are shown to be intimately mixed and there are found to be significantly fewer -OH terminations than -F and -O, with the proportions highly dependent on the synthesis method.

Synthesis of carbon/sulfur nanolaminates by electrochemical extraction of titanium from Ti2SC.

Herein we electrochemically and selectively extract Ti from the MAX phase Ti2SC to form carbon/sulfur (C/S) nanolaminates at room temperature. The products are composed of multi-layers of C/S flakes, with predominantly amorphous and some graphene-like structures. Covalent bonding between C and S is observed in the nanolaminates, which render the latter promising candidates as electrode materials for Li-S batteries. We also show that it is possible to extract Ti from other MAX phases, such as Ti3AlC2, Ti3SnC2, and Ti2GeC, suggesting that electrochemical etching can be a powerful method to selectively extract the "M" elements from the MAX phases, to produce "AX" layered structures, that cannot be made otherwise. The latter hold promise for a variety of applications, such as energy storage, catalysis, etc.

Conductive two-dimensional titanium carbide 'clay' with high volumetric capacitance.

Safe and powerful energy storage devices are becoming increasingly important. Charging times of seconds to minutes, with power densities exceeding those of batteries, can in principle be provided by electrochemical capacitors--in particular, pseudocapacitors. Recent research has focused mainly on improving the gravimetric performance of the electrodes of such systems, but for portable electronics and vehicles volume is at a premium. The best volumetric capacitances of carbon-based electrodes are around 300 farads per cubic centimetre; hydrated ruthenium oxide can reach capacitances of 1,000 to 1,500 farads per cubic centimetre with great cyclability, but only in thin films. Recently, electrodes made of two-dimensional titanium carbide (Ti3C2, a member of the 'MXene' family), produced by etching aluminium from titanium aluminium carbide (Ti3AlC2, a 'MAX' phase) in concentrated hydrofluoric acid, have been shown to have volumetric capacitances of over 300 farads per cubic centimetre. Here we report a method of producing this material using a solution of lithium fluoride and hydrochloric acid. The resulting hydrophilic material swells in volume when hydrated, and can be shaped like clay and dried into a highly conductive solid or rolled into films tens of micrometres thick. Additive-free films of this titanium carbide 'clay' have volumetric capacitances of up to 900 farads per cubic centimetre, with excellent cyclability and rate performances. This capacitance is almost twice that of our previous report, and our synthetic method also offers a much faster route to film production as well as the avoidance of handling hazardous concentrated hydrofluoric acid.

Factors Controlling the Spectroscopic Properties and Supramolecular Chemistry of an Electron Deficient 5,5-Dimethylphlorin Architecture.

A new 5,5-dimethylphlorin derivative (3H(PhlCF3 )) was prepared and studied through a combination of redox, photophysical, and computational experiments. The phlorin macrocycle is significantly distorted from planarity compared to more traditional tetrapyrrole architectures and displays solvatochroism in the soret region of the UV-vis spectrum (∼370-420 nm). DFT calculations indicate that this solvatochromic behavior stems from the polarized nature of the frontier orbital (LUMO+1) that is most heavily involved in these transitions. Compound 3H(PhlCF3 ) also displays an intriguing supramolecular chemistry with certain anions; this phlorin can cooperatively hydrogen-bond two equivalents of fluoride to form 3H(PhlCF3 )·2F- but does not bind larger halides such as Cl- or Br-. Analogous studies revealed that the phlorin can hydrogen-bond with carboxylate anions such as acetate to form 1:1 complexes such as 3H(PhlCF3 )·OAc- . These supramolecular assemblies are robust and form even in relatively polar solvents such as MeCN. Hydrogen-bonding of fluoride and acetate anions to the phlorin N-H residues significantly attenuates the redox and photophysical properties of the phlorin. Moreover, The ability to independently vary the size and pKa of a series of carboxylate hydrogen-bond acceptors has allowed us to probe how phlorin-anion association is controlled by the anion's size and/or basicity. These studies elucidate the physical properties and the electronic effects that shape the supramolecular chemistry displayed by the phlorin platform.

Synthesis, electrochemistry, and photophysics of a family of phlorin macrocycles that display cooperative fluoride binding.

A homologous set of 5,5-dimethylphlorin macrocycles in which the identity of one aryl ring is systematically varied has been prepared. These derivatives contain ancillary pentafluorophenyl (3H(Phl(F))), mesityl (3H(Phl(Mes))), 2,6-bismethoxyphenyl (3H(Phl(OMe))), 4-nitrophenyl (3H(Phl(NO2))), or 4-tert-butylcarboxyphenyl (3H(Phl(CO2tBu))) groups at the 15-meso-position. These porphyrinoids were prepared in good yields (35-50%) and display unusual multielectron redox and photochemical properties. Each phlorin can be oxidized up to three times at modest potentials and can be reduced twice. The electron-donating and electron-releasing properties of the ancillary aryl substituent attenuate the potentials of these redox events; phlorins containing electron-donating aryl groups are easier to oxidize and harder to reduce, while the opposite trend is observed for phlorins containing electron-withdrawing functionalities. Phlorin substitution also has a pronounced effect on the observed photophysics, as introduction of electron-releasing aryl groups on the periphery of the macrocycle is manifest in larger emission quantum yields and longer fluorescence lifetimes. Each phlorin displays an intriguing supramolecular chemistry and can bind 2 equiv of fluoride. This binding is allosteric in nature, and the strength of halide binding correlates with the ability of the phlorin to stabilize the buildup of charge. Moreover, fluoride binding to generate complexes of the form 3H(Phl(R))·2F(-) modulates the redox potentials of the parent phlorin. As such, titration of phlorin with a source of fluoride represents a facile method to tune the ability of this class of porphyrinoid to absorb light and engage in redox chemistry.