Biological treatment of triclosan using a novel strain of Enterobacter cloacae and introducing naphthalene dioxygenase as an effective enzyme.

In recent years, triclosan (TCS) has been widely used as an antibacterial agent in personal care products due to the spread of the Coronavirus. TSC is an emerging contaminant, and due to its stability and toxicity, it cannot be completely degraded through traditional wastewater treatment methods. In this study, a novel strain of Enterobacter cloacae was isolated and identified that can grow in high TCS concentrations. Also, we introduced naphthalene dioxygenase as an effective enzyme in TCS biodegradation, and its role during the removal process was investigated along with the laccase enzyme. The change of cell surface hydrophobicity during TCS removal revealed that a glycolipid biosurfactant called rhamnolipid was involved in TCS removal, leading to enhanced biodegradation of TCS. The independent variables, such as initial TCS concentration, pH, removal duration, and temperature, were optimized using the response surface method (RSM). As a result, the maximum TCS removal (97%) was detected at a pH value of 7 and a temperature of 32 °C after 9 days and 12 h of treatment. Gas chromatography-mass spectrometry (GC/MS) analysis showed five intermediate products and a newly proposed pathway for TCS degradation. Finally, the phytotoxicity experiment conducted on Cucumis sativus and Lens culinaris seeds demonstrated an increase in germination power and growth of stems and roots in comparison to untreated water. These results indicate that the final treated water was less toxic.

Pharmaceuticals removal by immobilized laccase on polyvinylidene fluoride nanocomposite with multi-walled carbon nanotubes.

The presence of pharmaceutical micropollutants in water and wastewater is considered a serious environmental issue. To eliminate these pollutants, biodegradation of pharmaceuticals using enzymes such as laccase, is proposed as a green method. In this study, immobilized laccase was used for the removal of two model pharmaceutical compounds, carbamazepine and diclofenac. Polyvinylidene fluoride (PVDF) membrane modified with multi-walled carbon nanotubes (MWCNTs) were synthesized as a tailor-made support for enzyme immobilization. Covalently immobilized laccase from Trametes hirsuta exhibited remarkable activity and activity recovery of 4.47 U/cm2 and 38.31%, respectively. The results also indicated improvement in the operational and thermal stability of the immobilized laccase compared to free laccase. Finally, by using immobilized laccase in a mini-membrane reactor, removal efficiencies of 27% in 48 h and 95% in 4 h were obtained for carbamazepine and diclofenac, respectively. The findings suggest that immobilized laccase on PVDF/MWCNT membranes is a promising catalyst for large-scale water and wastewater treatment which is also compatible with existing treatment facilities.

Removal of bisphenol A in aqueous solution using magnetic cross-linked laccase aggregates from Trametes hirsuta.

Enzymatic removal of Bisphenol A (BPA), acknowledged as an environmentally friendly approach, is a promising method to deal with hard degradable contaminants. However, the application of "enzymatic treatment" has been limited due to lower operational stability and practical difficulties associated with recovery and recycling. Enzyme immobilization is an innovative approach which circumvents these drawbacks. In this study, laccase from Trametes hirsuta was used for BPA removal. Amino-functionalized magnetic Fe3O4 nanoparticles were synthesized via the co-precipitation method followed by surface modification with (3-aminopropyl)trimethoxysilane (APTMS). The as-prepared nanoparticles were utilized for the immobilization of laccase with the magnetic cross-linked enzyme aggregates method (MCLEAs). Activity recovery of 27% was achieved, while no immobilized laccase was observed in the cross-linked enzyme aggregates method. The performance of immobilized laccase was measured by analyzing the degradation of BPA pollutant. The maximum removal efficiency of 87.3% was attained with an initial concentration of 60 ppm throughout 11 h.

Developing a new approach for (biological) optimal control problems: Application to optimization of laccase production with a comparison between response surface methodology and novel geometric procedure.

Laccase production by indigenous fungus, Phanerochaete chrysosporium, requires solving optimal problems to determine the maximum production of the enzyme within a definite time period and conditions specified in the solid-state fermentation process. For this purpose, parallel to response surface methodology, an analytical approach has been proposed based on the advanced concepts of Poisson geometry and Lie groups, which lead to a system of the Hamiltonian equations. Despite the dating of the Hamiltonian approach to solving biological problems, the novelty of this paper is based on the expression of a Hamiltonian system in notions of Poisson geometry, Lie algebras and symmetry groups and first integrals. In this way, all collected data and the variables are taken into account in their actual role in the Hamiltonian system without any limitation on their number and dimensions. Also, the Hamiltonian system obtained can be reduced by symmetry concepts of Lie algebras, which result in the exact solution of the initial optimal problem. In addition, it can be converted to Lagrangian and vice versa. The proposed approach applies to the mathematical models describing the production of biomass and lignocellulolytic enzymes, consumption of the lignocellulosic matrix, fermentation model of the Tequila production process, and the laccase production. Ultimately, a comparison between the approximate method for producing laccase using the response surface methodology and the proposed analytical method has been made.

Biodegradation of cyanide by a new isolated strain under alkaline conditions and optimization by response surface methodology (RSM).

BACKGROUND: Biodegradation of free cyanide from industrial wastewaters has been proven as a viable and robust method for treatment of wastewaters containing cyanide. RESULTS: Cyanide degrading bacteria were isolated from a wastewater treatment plant for coke-oven-gas condensate by enrichment culture technique. Five strains were able to use cyanide as the sole nitrogen source under alkaline conditions and among them; one strain (C2) was selected for further studies on the basis of the higher efficiency of cyanide degradation. The bacterium was able to tolerate free cyanide at concentrations of up to 500 ppm which makes it a good potentially candidate for the biological treatment of cyanide contaminated residues. Cyanide degradation corresponded with growth and reached a maximum level 96% during the exponential phase. The highest growth rate (1.23 × 10(8)) was obtained on day 4 of the incubation time. Both glucose and fructose were suitable carbon sources for cyanotrophic growth. No growth was detected in media with cyanide as the sole carbon source. Four control factors including, pH, temperature, agitation speed and glucose concentration were optimized according to central composite design in response surface method. Cyanide degradation was optimum at 34.2°C, pH 10.3 and glucose concentration 0.44 (g/l). CONCLUSIONS: Bacterial species degrade cyanide into less toxic products as they are able to use the cyanide as a nitrogen source, forming ammonia and carbon dioxide as end products. Alkaliphilic bacterial strains screened in this study evidentially showed the potential to possess degradative activities that can be harnessed to remediate cyanide wastes.