ABSTRACT
Human-exoskeleton interactions have the potential to bring about changes in human behavior for physical rehabilitation or skill augmentation. Despite significant advances in the design and control of these robots, their application to human training remains limited. The key obstacles to the design of such training paradigms are the prediction of human-exoskeleton interaction effects and the selection of interaction control to affect human behavior. In this article, we present a method to elucidate behavioral changes in the human-exoskeleton system and identify expert behaviors correlated with a task goal. Specifically, we observe the joint coordinations of the robot, also referred to as kinematic coordination behaviors, that emerge from human-exoskeleton interaction during learning. We demonstrate the use of kinematic coordination behaviors with two task domains through a set of three human-subject studies. We find that participants (1) learn novel tasks within the exoskeleton environment, (2) demonstrate similarity of coordination during successful movements within participants, (3) learn to leverage these coordination behaviors to maximize success within participants, and (4) tend to converge to similar coordinations for a given task strategy across participants. At a high level, we identify task-specific joint coordinations that are used by different experts for a given task goal. These coordinations can be quantified by observing experts and the similarity to these coordinations can act as a measure of learning over the course of training for novices. The observed expert coordinations may further be used in the design of adaptive robot interactions aimed at teaching a participant the expert behaviors.
Subject(s)
Exoskeleton Device , Humans , Biomechanical Phenomena , MovementABSTRACT
Robots have been used to offset the limb weight through gravity compensation in upper body rehabilitation to delineate the effects of loss of strength and loss of dexterity, which are two common forms of post-stroke impairments. In this paper, we explored the impact of this anti-gravity support on the quality of movement during reaching and coordinated arm movements in a pilot study with two participants with chronic stroke. The subjects donned the Harmony exoskeleton which supported proper shoulder coordination in addition to providing gravity compensation. Participants had previously taken part in seven one-hour sessions with the Harmony exoskeleton, performing six sets of passive-stretching and active exercises. Pre- and post-training sessions included assessments of two separate tasks, planar reaching and a set of six coordinated arm movements, in two conditions, outside of and supported by the exoskeleton. The movements were recorded using an optical motion capture system and analyzed using spectral arc length (SPARC) and straight line deviation to quantify movement smoothness and quality. We observed that gravity compensation resulted in an increased smoothness for the subject with high level of impairment whereas compensation resulted in a reduction in smoothness for the subject with low level of impairment in the reaching task. Both participants demonstrated better coordination of the shoulder-arm joint with gravity compensation. This result motivates further studies into the role of gravity compensation during coordinated movement training and rehabilitation interventions.
Subject(s)
Exoskeleton Device , Stroke Rehabilitation , Stroke , Biomechanical Phenomena , Humans , Movement , Pilot Projects , Upper ExtremityABSTRACT
Measurement of interaction forces distributed across the attachment interface in wearable devices is critical for understanding ergonomic physical human-robot interaction (pHRI). The main challenges in sensorization of pHRI interfaces are (i) capturing the fine nature of force transmission from compliant human tissue onto rigid surfaces in the wearable device and (ii) utilizing a low-cost and easily implementable design that can be adapted for a variety of human interfaces. This paper addresses both challenges and presents a modular sensing panel that uses force-sensing resistors (FSRs) combined with robust electrical and mechanical integration principles that result in a reliable solution for distributed load measurement. The design is demonstrated through an upper-arm cuff, which uses 24 sensing panels, in conjunction with the Harmony exoskeleton. Validation of the design with controlled loading of the sensorized cuff proves the viability of FSRs in an interface sensing solution. Preliminary experiments with a human subject highlight the value of distributed interface force measurement in recognizing the factors that influence ergonomic pHRI and elucidating their effects. The modular design and low cost of the sensing panel lend themselves to extension of this approach for studying ergonomics in a variety of wearable applications with the goal of achieving safe, comfortable, and effective human-robot interaction.
Subject(s)
Exoskeleton Device , Robotics , Wearable Electronic Devices , Ergonomics , HumansABSTRACT
Hemiparetic gait is abnormal asymmetric walking, often observed among patients with cerebral palsy or stroke. One of the major features of asymmetric gait is excessive reliance on the healthy leg, which results in improper load shift, slow walking speed, higher metabolic cost, and weakness of the unused leg. Hence, clinically it is desirable to promote gait symmetry to improve walking. While there are no clear methods to achieve this goal, we are exploring new methods where we guide the pelvis to change the gait symmetry. This controller is designed to mimic the hands of a physical therapist holding the pelvis and guiding it to promote the usage of both legs during walking. In this paper, we show that the essence of this method can be demonstrated by promoting asymmetry in the gait of healthy subjects when walking with the device. The results showed that their kinematics and kinetics changed asymmetrically during the intervention. Subjects demonstrated asymmetric lateral ground reaction force to compensate for the lateral forces applied on the pelvis. Muscle activities increased on the targeted leg show the forced use of the leg which can be used for rehabilitation of patients with an asymmetric gait.