Vilazodone-phospholipid mixed micelles for enhancing oral bioavailability and reducing pharmacokinetic variability between fed and fasted states.

Despite the effectiveness and high tolerability of vilazodone (VLZ) as an antidepressant, its use is still limited due to its poor solubility and food dependent absorption. This study aims to load VLZ-phospholipid complex into self-assembled micelles forming VLZ-PL mixed micelles (VLZ-PL-MM), that can enhance VLZ solubility, improve its bioavailability and reduce the pharmacokinetic variability between the fed and fasting conditions. The effect of surfactant type and concentration was assessed using four different non-ionic surfactants (Brij 58, Tween 80, Labrasol and Pluronic F127) in four different weight ratios between the drug-complex and surfactant (1:0.5, 1:1, 1:2 and 1:3 w/w). Two VLZ-PL-MM formulae prepared using Brij 58 and Labrasol in 1:3 w/w ratio were selected as optimised ones since they have the highest encapsulation efficiency (100.83 and 93.87%, respectively), a particle size below 250 nm (206.73 and 221.33 nm, respectively) and negative zeta potential values (-29.63, -17.20 mV, respectively). Lyophilisation of these formulations using 3% sucrose was successful with no statistical changes in particle size and zeta potential upon rehydration. Both formulations elicited faster and higher in-vitro drug release profiles compared to the pure drug and the marketed tablet. In addition, both selected formulae improved ex-vivo permeation across rabbit intestinal membrane compared to the pure drug and the marketed tablet, with marked superiority of the one prepared using Brij 58. The results of the in-vivo study in male albino rabbits revealed similar AUC0-24 values after the oral administration of the best achieved VLZ-PL-MM system under fed and fasted conditions (769.89 and 741.55 ng.h mL-1, respectively). On the other hand, the marketed product showed significantly lower values of the AUC0-24 relative to the VLZ-PL-MM system and there was a marked enhancement of absorption of drug from the marketed product in presence of food (244.24 and 174.96 ng.h mL-1 under fed and fasted conditions, respectively). In addition, VLZ concentrations in the brain after 24 h obtained from the selected VLZ-PL-MM were significantly higher than those obtained from marketed tablet under fed and fasted conditions. Thus, the phospholipid mixed micelles formulation enhances the oral bioavailability of the poorly soluble drug and reduces the pharmacokinetic variability between fasting and fed conditions.

Fluoxetine hydrochloride loaded lipid polymer hybrid nanoparticles showed possible efficiency against SARS-CoV-2 infection.

Up to date, there were no approved drugs against coronavirus (COVID-19) disease that dangerously affects global health and the economy. Repurposing the existing drugs would be a promising approach for COVID-19 management. The antidepressant drugs, selective serotonin reuptake inhibitors (SSRIs) class, have antiviral, anti-inflammatory, and anticoagulant effects, which makes them auspicious drugs for COVID 19 treatment. Therefore, this study aimed to predict the possible therapeutic activity of SSRIs against COVID-19. Firstly, molecular docking studies were performed to hypothesize the possible interaction of SSRIs to the Severe Acute Respiratory Syndrome coronavirus 2 (SARS-COV-2) main protease. Secondly, the candidate drug was loaded in lipid polymer hybrid (LPH) nanoparticles to enhance its activity. The studied SSRIs were Fluoxetine hydrochloride (FH), Atomoxteine, Paroxetine, Nisoxteine, Repoxteine RR, and Repoxteine SS. Interestingly, FH could effectively bind with SARS-COV-2 main protease via hydrogen bond formation with low binding energy (-6.7 kcal/mol). Moreover, the optimization of FH-LPH formulation achieved 65.1 ± 2.7% encapsulation efficiency, 10.3 ± 0.4% loading efficiency, 98.5 ± 3.5 nm particle size, and -10.5 ± 0.45 mV zeta potential. Additionally, it improved cellular internalization in a time-dependent manner with good biocompatibility on Human lung fibroblast (CCD-19Lu) cells. Therefore, the study suggested the potential activity of FH-LPH nanoparticles against the COVID-19 pandemic.

Hexosomes as Efficient Platforms for Possible Fluoxetine Hydrochloride Repurposing with Improved Cytotoxicity against HepG2 Cells.

The aim of this study was to investigate the feasibility of hexosomes (HEXs) as competent platforms for fluoxetine hydrochloride (FH) repurposing against HepG2 hepatocellular carcinoma. Different FH-loaded HEX formulations were prepared and optimized by the hot emulsification method. The HEX features such as particle size, ζ potential, and drug entrapment efficiency (EE%) can be tailored by tuning HEX components and fabrication conditions. The composition of the optimized FH hexosome (OFH-HEX) was composed of 3.1, 1.4, 0.5, 0.2, and 94.8% for glyceryl monooleate, oleic acid, pluronic F127, FH, and deionized water, respectively. The anionic OFH-HEX with a particle size of 145.5 ± 2.5 nm and drug EE% of 45.4 ± 1.2% was able to prolong the in vitro FH release, where only 19.5 ± 2.3% released in phosphate-buffered saline (PBS) pH 7.4 after 24 h. Contrarily, HEX rapidly released FH in acetate buffer pH 5.5 and achieved a 90.5 ± 4.7% release after 24 h. The obtained HEX showed an improved cellular internalization in a time-dependent manner and enhanced the cytotoxicity (2-fold higher than FH solution). The current study suggests the potential of FH-HEX as a possible anticancer agent against hepatocellular carcinoma.

Insulin Mucoadhesive Liposomal Gel for Wound Healing: a Formulation with Sustained Release and Extended Stability Using Quality by Design Approach.

The present study deals with the formulation of topical insulin for wound healing with extended stability and sustained release, by applying quality by design concepts. Insulin has been promoted as a promising therapeutic wound healing agent. Topical formulation of insulin faced major problems, as it cannot be delivered safely to the wound with a controlled rate. Formulation of insulin-loaded vesicles in optimized bio-adhesive hydrogels has been explored to ensure a safe delivery of insulin to wounds in a controlled manner. Quality by design (QbD) was applied to study the effect of several critical process parameters on the critical quality attributes. Ishikawa diagram was used to identify the highest risk factors, which were screened by a fractional factorial design and augmented by Box-Behnken design. The optimized formula was incorporated into a mucoadhesive gel, which was further subjected to stability and clinical studies. An optimized formula was obtained with a particle size of 257.751 nm, zeta potential - 20.548 mv, 87.379% entrapment efficiency, and a release rate of 91.521 µg/cm2/h. The results showed that liposomal insulin remained stable for 6 months in aqueous dispersion state at 4°C. Moreover, the release was sustained up to 24 h. The clinical study showed an improvement in the wound healing rate, 16 times, as the control group, with magnificent reduction in the erythema of the ulcer and no signs of hypoglycemia. Insulin-loaded liposomal chitosan gel showed a promising drug delivery system with high stability and sustained release.

Optimization and Evaluation of Beclomethasone Dipropionate Micelles Incorporated into Biocompatible Hydrogel Using a Sub-Chronic Dermatitis Animal Model.

The current study is concerned with the development and characterization of mixed micelles intended for the dermal delivery of beclomethasone dipropionate, which is a topical corticosteroid used in the management of atopic dermatitis. Mixed micelles were prepared using thin-film hydration technique, employing different concentrations of pluronic L121 with either poloxamer P84 or pluronic F127 with different surfactant mixture-to-drug ratios. The prepared formulae were characterized concerning entrapment efficiency, particle size, and zeta potential. Two formulae were chosen for ex vivo skin deposition studies: one formulated using pluronic L121/poloxamer P84 mixture while the other using pluronic L121/pluronic F127 mixture. The optimum formula with the highest dermal deposition was subjected to morphological examination and was formulated as hydroxypropyl methylcellulose hydrogel. The hydrogel was evaluated regarding viscosity and was subjected to ex vivo deposition study in comparison with the commercially available cream Beclozone®. In vivo histopathological study was conducted for both the hydrogel and Beclozone® in order to evaluate their healing efficiency. In vivo histopathological study results showed that the prepared hydrogel successfully treated sub-chronic dermatitis in an animal model within a shorter period of time compared to Beclozone®, resulting in better patient compliance and fewer side effects.

Nanodispersion-loaded mucoadhesive polymeric inserts for prolonged treatment of post-operative ocular inflammation.

Mucoadhesive polymeric films incorporated with ketorolac tromethamine-loaded nanodispersion aiming the sustained delivery of the drug to the cornea have been developed and characterised for the treatment of post-operative ocular inflammation. Nanodispersions were prepared by ionic gelation method with various concentrations of chitosan and sodium tripolyphosphate. The developed nanodispersions were analysed for morphology, particle size, dispersion homogeneity, zeta potential, entrapment efficiency and drug release. The nanodispersion that showed the smallest particle size and the highest entrapment efficiency was incorporated in optimised HPMC E15 and Eudragit RL100/HPMC K4m films. The formulation with optimum physicomechanical properties was selected to study its ex vivo transcorneal permeation through freshly excised bovine cornea in comparison with the nanodispersion and the marketed eye drops (Acular®). The polymeric ocular film showed greater permeation than aqueous eye drops. Moreover, the ocular film revealed a prolonged anti-inflammatory effect compared to eye drops when applied to inflamed rabbit's eyes.

Ketoroloac tromethamine loaded nanodispersion incorporated into thermosensitive in situ gel for prolonged ocular delivery.

The present study was designed to improve the ocular availability of ketorolac tromethamine and to prolong its precorneal residence time for the treatment of postoperative ocular inflammation. Ketorolac tromethamine nanodispersions were successfully prepared by nanoprecipitation method using Eudragit(®) RL100. These nanodispersions were characterized in terms of particle size, zeta potential, entrapment efficiency and in vitro release. Consequently, the optimum nanodispersion was incorporated into thermosensitive in situ gel. The optimum gelling capacity was obtained by 20% Pluronic(®) F-127 and 14% Pluronic(®) F-127/1.5% HPMC K4m. The gelling temperature and gelation time of the in situ gels increased by decreasing the concentration of Pluronic(®) F-127. The mucoadhesive strength was significantly improved by the addition of HPMC. Incorporation of ketorolac tromethamine loaded nanodispersions into in situ gel bases sustained the release of ketorolac tromethamine, improved its ocular availability and prolonged its residence time without causing irritation to eye.

Preparation and in vitro/in vivo evaluation of antimicrobial ocular in situ gels containing a disappearing preservative for topical treatment of bacterial conjunctivitis.

The study aimed to formulate and evaluate levofloxacin hemihydrate ocular in situ gels along with freshly prepared disappearing preservative reported to be safer to human eyes. Formulae were prepared using thermosensitive (PF127 and PF68) or ion-activated (Gelrite) polymers. They were evaluated for gelation temperature (GT), capacity, content uniformity, pH, rheological behavior, in vitro drug release with kinetic analysis. Best formulae were exposed to storage effect to select the optimum formula that was subjected to different sterilization methods and in vivo evaluation. The prepared disappearing preservative (sodium perborate monohydrate) proved to be active oxidative preservative and compatible with our formulae. F9 (24% PF127, 15% PF 68, 0.5% levofloxacin hemihydrate, and 0.0025% sodium perborate monohydrate) showed prolonged drug release (12 h), acceptable GT, viscosity, and pH. It remained stable over 3 months at two temperatures and was best sterilized by filtration. It showed longer residence time (12 h) in rabbits' eye fluids compared with the Levoxin® eye drops (4 h). This successful attempt of using thermo-gelling system along with a disappearing type of preservatives would allow the use of these systems to achieve sustained release of antimicrobial drugs with minimum risk of eye damage improving patient compliance and treatment efficacy.

Brain targeted solid lipid nanoparticles for brain ischemia: preparation and in vitro characterization.

This study aims at formulating solid lipid nanoparticles (SLNs) of Vinpocetine (VIN) to be used as a brain targeted sustained drug-delivery system. VIN is a derivative of vincamine alkaloid, used for chronic cerebral vascular ischemia. However, it suffers from low bioavailability and short half-life. Its oral bioavailability is recorded to be between 7 and 55%. Its elimination half-life is 1-2 h so it would be a good candidate for a sustained drug-delivery system. VIN SLNs were prepared using modified high shear homogenization followed by ultrasonication technique. The effect of incorporating different lipids at different concentrations of various surfactants was investigated. The VIN SLNs were characterized by entrapment efficiency percent (EE%), particle size distribution, zeta-potential, and cumulative released percent after 96 h. The EE% ranged between 83.34% ± 0.95-94.56% ± 0.11 due to the lipophilic character of VIN. The mean particle size measured ranged from 123 nm-464 nm. The cumulative released percent after 96 h ranged from 23.55% to 75.67% showing a controlled release profile. Formula (F32) composed of 5% glyceryl monostearate (GMS) and stabilized by 2% surfactant mixture [Tween 80, Pluronic F 68 (1:1)] was the most appropriate formula for brain delivery having EE% of 89.09% ± 1.49, zero-order release kinetics with cumulative released percent of 72.12% after 96 h, zeta-potential of -11.3 ± 0.97 mV. It showed a unimodal size distribution with particle size ≈ 90 nm and polydispersity index of 0.121. The formula of choice in this study exhibited a zero-order sustained release profile and met the requirement for a brain targeted SLN so it could be a promising formula to deliver VIN to the brain.

Colon-targeted celecoxib-loaded Eudragit® S100-coated poly-ε-caprolactone microparticles: preparation, characterization and in vivo evaluation in rats.

CONTEXT: Celecoxib suffers from low and variable bioavailability following oral administration of solutions or capsules. Recent studies proved that chemoprevention of colorectal cancer is possible with celecoxib. OBJECTIVE: This work aimed to tailor colon-targeted celecoxib-loaded microparticles using time-dependant and pH-dependant coats. Estimation of drug pharmacokinetics following oral administration to fasted rats was another goal. METHODS: A 2³ factorial design was adopted to develop poly-ε-caprolactone (PCL) celecoxib-loaded microparticles (F1-F8). To minimize drug-percentages released before colon, another coat of Eudragit® S100 was applied. In vitro characterization of microparticles involved topography, determination of particle size and entrapment efficiency (EE %). Time for 50% drug release (t(50%)) and drug-percentages released after 2 hours (Q(2h)) and 4 hours (Q(4h)) were statistically compared. Estimation of drug pharmacokinetics following oral administration of double-coat microparticles (F10) was studied in rats. RESULTS: PCL-single-coat microparticles were spherical, discrete with a size range of 60.66 ± 4.21-277.20 ± 6.10 µm. Direct correlations were observed between surfactant concentration and EE%, Q(2h) and Q(4h). The PCL M.wt. and drug: PCL ratio had positive influences on EE% and negative impacts on Q(2h) and Q(4h). When compared to the best achieved PCL-single-coat microparticles (F2), the double-coat microparticles (F10) showed satisfactory drug protection; Q(2h) and Q(4h) were significantly (P < 0.01) decreased from 31.84 ± 1.98% and 54.72 ± 2.10% to 15.92 ± 1.78% and 26.93 ± 2.76%, respectively. When compared to celecoxib powder, F10 microparticles enhanced the bioavailability and extended the duration of drug-plasma concentration in rats. CONCLUSION: The developed double-coat microparticles could be considered as a promising celecoxib extended-release colon-targeting system.

Bioavailability assessment of vitamin A self-nanoemulsified drug delivery systems in rats: a comparative study.

OBJECTIVES: To assess and compare the bioavailability of three different oral dosage forms of vitamin A in rats. The formulations included vitamin A self-nanoemulsified drug delivery (SNEDD) optimized formulation-filled capsule (F1), vitamin A SNEDD optimized formulation compressed tablet (F2) and vitamin A oily solution-filled capsules without any additives (control, F3). MATERIALS AND METHODS: Bioavailability was assessed after a single oral dose of the three formulations using three groups of rats, each group comprising 6 rats. Blood samples were collected at baseline and over the next 8 h. Plasma was separated and extracted to obtain the drug, which was measured by HPLC. Statistical data analysis was performed using the Student t test and ANOVA with p < 0.05 as the minimal level of significance. RESULTS: From the pharmacokinetic parameters, both F1 and F2 showed improved bioavailability compared to F3. The values of AUC +/- SD were 3,080.7 +/- 190.2, 2,137.1 +/- 130.5 and 1,485.2 +/- 80.1 ng x h/ml for F1, F2 and F3, respectively. The Tmax was 1 h in case of F1 and F2 as compared to 1.5 h for F3. The Cmax +/- SD was 799.5 +/- 48.5, 656.2 +/- 64.4 and 425.8 +/- 33.1 for F1, F2 and F3, respectively. The increase in AUC, Cmax and Tmax was significant (p < 0.05). The bioavailability calculated from the AUC for F1 and F2 relative to F3 was 207.4 and 143.8%, respectively. The bioavailability increased almost twofold and 1.4 times for F1 and F2, respectively. CONCLUSIONS: The study showed that the newly developed vitamin A SNEDD formulations increased the rate and extent of drug absorption compared to the oily drug solution. The present investigation demonstrated that vitamin A SNEDD optimized formulations, either as filled capsules or as compressed tablets, were superior to its oily solution with regard to their biopharmaceutical characteristics.