Olanzapine Mesoporous Nanostructured Lipid Carrier: Optimization, Characterization, In Vivo Assessment, and Physiologically Based Pharmacokinetic Modeling.

A promising approach has been emerging to enhance dissolution of hydrophobicdrugsby encapsulation in mesoporous silica materials. Olanzapine is a practically insoluble antipsychotic drug which is subjected to excessive first pass effect and shows inadequate oral bioavailability. Therefore, mesoporous silica was used to improve bioavailability of olanzapine incorporated in nano-structured lipid carriers (NLCs). These systems were characterized for their particle size, polydispersity index (PDI), zeta potential, entrapment efficiency (EE) and differential scanning calorimetry (DSC) as well asits release profile. The optimized mesoporous NLC system displayed nano-spherical particles (120.56 nm), possessed high entrapment efficiency (88.46%) and the highest percentage of drug released after six hours (75.13%). The biological performance of the optimized system was assessed in comparison with the drug suspension in healthy albino rabbits. The optimized system showed significantly (P < 0.05) prolonged MRT (8.47 h), higher Cmax (22.12± 0.40 ng/ml) and Tmax (2.0 h) values compared to drug suspension. Physiologically based pharmacokinetic (PBPK) model was simulated and verified. All the predicted results were within 0.6 and 1-fold of the reported data. To set a conclusion, in vitro results as well as in vivo pharmacokinetic study and PBPK data showed an enhancement in bioavailability of the optimized NLCs system over the plain drug suspension. These results proved the potentiality of incorporating olanzapine in mesoporous NLC for a significant improvement in oral bioavailability of olanzapine.

Spray-Dried Rosuvastatin Nanoparticles for Promoting Hair Growth.

In this research, we examined the effect of rosuvastatin calcium-loaded nanoparticles on the hair growth-promoting activity on Albino rats. Nanoparticles were prepared using 2:1 weight ratio of drug to methyl-ß-cyclodextrin with 10, 20, and 30% stabilizers (phospholipid, polyvinyl pyrrolidone K30, and Compritol 888 ATO) using nanospray dryer. Subsequently, the prepared nanoparticles were evaluated for their process yield, particle size, polydispersity index, zeta potential, and in vitro drug release as well as in vivo studies. The dried nanoparticles showed process yield values up to 84% with particle size values ranging from 218 to 6258 nm, polydispersity index values ranging from 0.32 to 0.99, and zeta potential values ranging from - 6.1 to - 11.9 mV. Combination of methyl-ß-cyclodextrin with 10% polyvinyl pyrrolidone K30 accomplished nanoparticles with the lowest particle size (218 nm) and polydispersity index (0.32) values. These nanoparticles had suitable process yield value (70.5%) and were able to retard drug release. The hair growth-promoting activity for the selected nanoparticles revealed the highest hair length values in Albino rats after 14 days of the hair growth study compared with non-medicated nanoparticles, nanoparticles' physical mixture, rosuvastatin solution, and marketed minoxidil preparation groups as well as the control group. The immunohistochemistry images for both selected nanoparticles and marketed minoxidil groups showed a significant increase in the diameter of hair follicle and percent area fraction of cytokeratin 19 in the outer root sheath of hair follicle compared with other tested groups. Rosuvastatin nanoparticles prepared by nanospray drying technique could be a good competitor to minoxidil for hair growth-promoting activity. Graphical abstract.

Development of folic acid-loaded nanostructured lipid carriers for topical delivery: preparation, characterisation and ex vivo investigation.

The present work is designed to achieve efficient localised skin delivery of folic acid (FA)-loaded nanostructured lipid carriers (NLCs) to infer efficient treatment of skin photoageing conditions induced via excessive exposure to ultraviolet (UV) radiation. FA NLCs were prepared by high-speed homogenisation followed by ultrasonication. The obtained NLCs revealed high encapsulation efficiencies (89.42-99.26%) with nanometric particle sizes (27.06-85.36 nm) of monodisperse distribution (PDI = 0.137-0.442), zeta potential values >|27| mV, pseudoplastic rheological behaviour, good spreadability (2.25-3.30 cm) and promoted occlusive properties throughout 48 h. Optimised NLC formulations appeared as sphere-shaped particles using transmission electron microscopy, showed improved photostability of FA and prolonged in vitro release profile best fitted to Higuchi diffusion model. Ex vivo permeation and deposition of FA, employing Wistar rat skins, depicted enhanced permeability and existence of FA in skin layers after 6 h. Based on the obtained results, FA-loaded NLC formulations demonstrate a promising modality for anti-photoageing therapy.

Proniosomal gel-derived niosomes: an approach to sustain and improve the ocular delivery of brimonidine tartrate; formulation, in-vitro characterization, and in-vivo pharmacodynamic study.

Brimonidine tartrate (BRT) is a hydrophilic α2 adrenergic agonist used for the treatment of glaucoma. Glaucoma is an ocular disease affecting the anterior segment of the eye requiring lifetime treatment. Owing to the obstacles facing ocular delivery systems and hydrophilicity of BRT, frequent administration of the eye drops is required. Niosomes have been widely used to improve the ocular bioavailability of the topically applied drugs and to enhance the ocular residence time. However, they have drawbacks as physical instability, aggregation, and loss of the entrapped drug. For this reason, BRT proniosomes were prepared to overcome niosomal instability issues. A D-optimal design was utilized to determine the optimum conditions for preparation of the proniosomal gels. Independent variables were amount of surfactant, surfactant:cholesterol ratio, and type of surfactant used. The dependent variables were entrapment efficiency (EE%), particle size, percentage of drug released after 2 h (Q2h), and percentage of drug released after 24 h (Q24h). The optimum formula was suggested with desirability 0.732 and the composition of 540 mg Span 60 and 10:1 surfactant:cholesterol ratio. The results obtained after reconstitution were; EE% of 79.23 ± 1.12% particle size of 810.95 ± 16.758 nm, polydispersity index (PDI) 0.6785 ± 0.213, zeta potential 59.1 ± 0.99 mV, Q2h40.98 ± 1.29%, Q8h 63.35 ± 6.07%, and Q24h = 91.11 ± 1.76%. Transmission electron microscope imaging of the formula showed the typical spherical shape of niosomes. In-vivo pharmacodynamic study assured the improved ocular bioavailability of BRT selected formula when compared with Alphagan®P with relative AUC0-24 of 5.024 and 7.90 folds increase in the mean residence time (MRT). Lack of ocular irritation of the formula was assured by Draize test.

Design and evaluation of novel inhalable sildenafil citrate spray-dried microparticles for pulmonary arterial hypertension.

Pulmonary delivery of vasodilators is a promising alternative for the intravenous and oral treatment of pulmonary arterial hypertension (PAH). The aim of this study was to design and evaluate hydrogel microparticles as a carrier for sustained pulmonary delivery of sildenafil citrate. Spray dried hydrogel microparticles containing biodegradable sodium carboxymethyl cellulose, sodium alginate, and sodium hyaluronate polymers at variable concentrations were prepared. A design of experiment using the "Extreme Vertices Mixture" design was executed. The design was used to study the influence of polymer concentration and their interactions on the physicochemical properties of the formulations in terms of particle size, particle size distribution, product yield, entrapment efficiency, and in-vitro drug release. Selected formulations were also evaluated for swelling, biodegradation, moisture content, in-vitro aerodynamic performance, and cytotoxicity. In addition, a lung deposition and pharmacokinetic study was conducted in rats to study drug accumulation in lungs and blood after intratracheal administration of the spray dried inhalable hydrogel microparticles in comparison to orally administered Viagra®. The results demonstrated that formulated microparticles had a mean geometric particle size between 2 and 5 µm, entrapment efficiency of >80%, and yield ranging between 47 and 66% w/w. The in-vitro drug release profiles showed a sustained drug release of sildenafil citrate for over 24 h. The statistical design showed a significant influence of the microparticulate composition on the physicochemical properties. Furthermore, selected formulations were evaluated for their aerodynamic properties. The aerodynamic properties included fine particle fraction ranging between 24 and 30%, dose recovery percent of 68-8 5%, and average mass median aerodynamic diameter of 4.6-4.8 µm. The in-vivo pharmacokinetic study showed that inhaled spray dried hydrogel microparticles (M6) formulation had significantly higher lung/blood Cmax, AUC, extended half-life, and mean residence time in comparison to orally administered sildenafil citrate of the same dose. In conclusion, the formulated drug-loaded spray dried hydrogel microparticles showed promising in-vitro and in-vivo results for the pulmonary delivery of sildenafil citrate. The spray dried hydrogel microparticles formulation can be considered as a potential alternative of oral sildenafil citrate for treatment of PAH.

Mesenchymal stem cells associated with chitosan scaffolds loaded with rosuvastatin to improve wound healing.

In this study we explored the role of rosuvastatin calcium in skin regeneration as statins play important role in the field of tissue engineering. Chitosan hydrochloride was crosslinked with different weight ratios of collagen, ß-glycerolphosphate and carboxymethyl cellulose to produce scaffolds by lyophilization technique. Subsequently, the fabricated scaffolds were examined for their morphology, water absorption capacity, water retention, friability and in-vitro drug release as well as in-vivo studies. The results revealed porous 3-D structured scaffolds with maximum water absorption values-ranging between 396 and 2993%. Scaffolds containing carboxymethyl cellulose revealed highest water absorption-values. In-vitro drug release results showed gradual drug release for 60 h with mean dissolution time-values (MDT) between 13 and 21 h. Combination of chitosan, collagen, carboxymethyl cellulose in weight ratio of 40:30:30, respectively achieved gradual disintegration of the scaffold in a simulating medium to an open wound after 4 days. This selected scaffold loaded with rosuvastatin revealed increase proliferation of human dermal fibroblasts compared to placebo scaffold. After 30 days of implantation of selected medicated scaffold loaded with/without mesenchymal stem cells and placebo scaffolds to induced wounds in Albino rats, enhanced skin regeneration and absence of scar formation for drug loaded scaffolds were observed. The histopathological study showed the advantage of stem cells-loaded scaffolds through the normal redistribution of collagen in the epidermal layer. In conclusion, rosuvastatin calcium and stem cells loaded in the tested scaffolds proved their potential effect in enhancing skin healing and regeneration.

Lamotrigine loaded poly-ɛ-(d,l-lactide-co-caprolactone) nanoparticles as brain delivery system.

Management of epilepsy requires brain delivery therapy, therefore, this study was aimed to prepare lamotrigine loaded poly-ɛ-(d,l-lactide-co-caprolactone) (PLCL) nanoparticles using spontaneous emulsification solvent diffusion method. Nanoparticles for brain delivery required to have a particle size <200 nm, polydispesity index <0.2 and a sustained drug release properties. For such aim different factors were considered in preparing the nanoparticles as PLCL monomers' ratio, type of organic solvent used to prepare the nanoparticles, amount of PLCL and Pluronic®F127 in the nanoparticles. Prepared nanoparticles were characterized for their shape, particle size, polydispersity index, zeta potential, encapsulation efficiency, drug loading capacity, process yield and in-vitro drug release pattern. The in-vivo investigation for brain delivery of selected nanoparticles delivered by intravenous route was investigated in rats and compared to that for oral tablet. The obtained nanoparticles were spherical in shape. The amount of surfactant and PLCL affected the properties of the obtained nanoparticles. Using a mixture of organic solvent in preparing the nanoparticles improved its properties. The nanoparticles prepared using PLCL with monomers' ratio of 25:75, had particle size value of 125 nm, polydispersity index value of 0.184, zeta potential value of -39 mV and encapsulation efficiency value of 99%, was selected to study their efficacy to deliver the drug to the brain. The tested nanoparticles showed higher values of Tmax, Cmax, AUC, and MRT in homogenized rat brain, compared to oral lamotrigine tablet, while the bioavailability of the oral tablet was higher in rat plasma compared to that for the nanoparticles. This reflects that brain was the main distribution site for tested nanoparticles, and plasma was the main distribution site for oral tablets. This confirms the goal of the selected formulation as brain delivery nanoparticles.

PLGA Nanoparticles as Subconjunctival Injection for Management of Glaucoma.

Nanoparticles fabricated from the biodegradable and biocompatible polymer, polylactic-co-glycolic acid (PLGA), could be a promising system for targeting ocular drug delivery. The objective of this work was to investigate the possibility of encapsulating brinzolamide in PLGA nanoparticles in order to be applied as a subconjunctival injection that could represent a starting point for developing new therapeutic strategies against increase in ocular pressure. The brinzolamide-loaded PLGA nanoparticles were fabricated using emulsion-diffusion-evaporation method with varying concentrations of Tween 80 or poloxamer 188 (Plx) in aqueous and organic phases. The nanoparticles were characterized in terms of particle size and size distribution, entrapment efficiency and in-vitro drug release pattern as well as DSC and X-ray analysis. Nanoparticles prepared using Tween 80 in the aqueous phase showed higher encapsulation efficiency and smaller particle size-values compared to those prepared using Plx. Furthermore, the addition of Plx 188 or Brij 97 to the organic phase in the formulation containing Tween 80 in the aqueous phase led to an increase in the particle diameter-values of the obtained nanoparticles. The nanoparticles had the capacity to release the brinzolamide in a biphasic release profile. The nanoparticles were spherical in shape and the drug was entraped in the nanoparticles in an amorphous form. Selected nanoparticles, injected subconjunctivally in normotensive Albino rabbits, were able to reduce the IOP for up to 10 days. Nanoparticles loaded with brinzolamide with lower particle size were able to reduce the IOP for longer period compared to those with higher particle size. Histopathological studies for the anterior cross sections of the rabbits' eyes revealed that the tested nanoparticles were compatible with the ocular tissue. The overall results support that PLGA nanoparticles, applied as subconjunctival injection, can be considered as a promising carrier for ocular brinzolamide delivery with targeting delivery of the drug to the eye tissues.

Design and In Vitro/In Vivo Evaluation of Ultra-Thin Mucoadhesive Buccal Film Containing Fluticasone Propionate.

Fluticasone propionate is a synthetic corticosteroid drug distinguished by its potent anti-inflammatory action with low systemic side effects in comparison to other corticosteroids making it a potential drug for local buccal delivery. The aim of the present study was to design mucoadhesive buccal film containing fluticasone that is aesthetically acceptable and could maintain local drug release for a sustained period to manage the sign and symptoms of severe erosive mouth lesions. Solvent casting technique was used in film preparation. Different polymeric blends were used either alone or in combination with mucoadhesive polymers, sodium carboxymethyl cellulose (SCMC), or Carbopol 971P at different concentrations. The physicochemical properties, in vitro mucoadhesion time as well as the drug release properties for all prepared formulations were determined. Selected formulations with adequate properties were further examined by differential scanning calorimetry (DSC) and X-ray diffraction (XRD) and subjected to in vivo evaluation. Films containing hydroxypropyl methylcellulose (HPMC)/ethyl cellulose (EC) showed acceptable physicochemical properties, homogenous drug distribution, convenient mucoadhesion time, moderate swelling as well as sustained drug release up to 12 h. The biological performance of these formulations was assessed on healthy human volunteers and compared with a prepared mouthwash which showed enhanced pharmacokinetic parameters for the selected films in comparison to the mouthwash. The results revealed that the optimized formulation containing HPMC/EC and 10% SCMC could successfully achieve sustained drug release for 10 h which is considered promising for local treatment of severe mouth lesions.

Effects of different combinations of nanocrystallization technologies on avanafil nanoparticles: in vitro, in vivo and stability evaluation.

The study investigated the effects of different combined top-down and bottom-up nanocrystallization technologies on particle size and solid state of avanafil nanoparticles. Combined antisolvent precipitation-ultrasonication (sonoprecipitation) technique was adopted to prepare 18 formulas according to 32.21 factorial design using 3 stabilizers; Tween 80, polyvinyl alcohol (PVA) and Pluronic F68 at different concentrations with different cryoprotectants. Particle size analysis of the lyophilized formulas showed that Tween 80 was an effective nanoparticles stabilizer in contrast to Pluronic F68 and PVA which failed to prevent nanoparticles flocculation when they were used at high concentration. The combined effects of nanonization and amorphism contributed to the improvement in solubility. Further processing of the sonoprecipitated formulas by high pressure homogenization (HPH) (modified NANOEDGE™ technology) resulted in further size reduction of PVA-stabilized particles, while it stimulated flocculation of Tween-stabilized nanoparticles. Nevertheless, all of the homogenized formulas partially retrieved their crystallinity which reduced their solubility. Non-homogenized formula 2E composed of 1:2 (avanafil: Tween) with glucose as cryoprotectant, exhibited 13.68- and 2.59-fold improvement in solubility and in vitro dissolution, respectively. This formula had oral bioavailability of 137.02% relative to Spedra® tablets and it maintained its nanosize, amorphism and dissolution behavior over 6 months of storage under stress conditions.

Formulation of avanafil in a solid self-nanoemulsifying drug delivery system for enhanced oral delivery.

Avanafil was incorporated into solid self-nanoemulsifying systems with the aim of improving its oral bioavailability. Labrafil, Labrafac, and Miglyol 812 N were investigated as oils, Tween 80 and Cremophor EL as surfactants, and Transcutol HP as a co-surfactant. Nine formulations produced clear solutions of 13.89-38.09nm globules after aqueous dilution. Adsorption of preconcentrate onto Aeroperl 300 Pharma at a 2:1 ratio had no effect on nanoemulsion particle size. Differential scanning calorimetry, X-ray diffraction, and scanning electron microscopy indicated that avanafil was molecularly dispersed within the solid nanosystems. A formulation containing 10% Labrafil, 60% Tween 80, and 30% Transcutol HP had the highest drug loading (44.48mg/g) and an acceptable in vitro dissolution profile (96.42% within 30min). This formulation was chemically and physically stable for 6months under accelerated storage conditions and it produced a 3.2-fold increase in bioavailability in rabbits, as compared to conventional commercially available avanafil tablets (Spedra(®)).

Effect of different polymers on avanafil-ß-cyclodextrin inclusion complex: in vitro and in vivo evaluation.

In this study, we examined the effect of different polymers on the chemical, physical and pharmacokinetic properties of avanafil-ß-cyclodextrin (ß-CD) inclusion complex. Equimolar mixtures of drug and ß-CD were used to prepare 25 ternary drug-ß-CD-polymer inclusion complexes using five different polymers, polyethylene glycol (PEG 4000), polyvinyl pyrrolidone (PVP K-30), chitosan, hydroxypropylmethyl cellulose, and hydroxyethyl cellulose, each in five different concentrations, 1, 3, 5, 7, and 10% (w/w). The addition of 10% (w/w) PEG 4000 resulted in a significant decrease of drug solubility, where the infrared spectra and differential scanning thermograms revealed an interaction between PEG 4000 and avanafil which hindered drug inclusion. In contrast, addition of 7% (w/w) PVP K-30 facilitated drug inclusion as concluded from differential scanning thermograms, X-ray diffraction patterns and scanning electron micrographs. This resulted in a subsequent improvement in drug solubility and in vitro dissolution. This formula was chemically and physically stable for 6 months under accelerated storage conditions. The formula had a relative bioavailability of 125.56% in rabbits as compared to conventional commercially available avanafil tablets (Spedra(®)).

Nano Spray Drying Technique as a Novel Approach To Formulate Stable Econazole Nitrate Nanosuspension Formulations for Ocular Use.

The effect of using methyl-ß-cyclodextrin and hydroxypropyl-ß-cyclodextrin as carriers for econazole nitrate nanoparticles prepared by nano spray dryer was explored in this work. Stabilizers, namely, poly(ethylene oxide), polyvinylpyrrolidone k30, poloxamer 407, Tween 80, and Cremophor EL, were used. The nano spray dried formulations revealed almost spherical particles with an average particle size values ranging from 121 to 1565 nm and zeta potential values ranging from -0.8 to -2.5 mV. The yield values for the obtained formulations reached 80%. The presence of the drug in the amorphous state within the nanosuspension matrix system significantly improved drug release compared to that for pure drug. Combination of hydroxypropyl-ß-cyclodextrin with Tween 80 achieved an important role for preserving the econazole nanosuspension from aggregation during storage for one year at room temperature as well as improving drug release from the nanosuspension. This selected formulation was suspended in chitosan HCl to increase drug release and bioavailability. The in vivo evaluation on albino rabbit's eyes demonstrated distinctly superior bioavailability of the selected formulation suspended in chitosan compared to its counterpart formulation suspended in buffer and crude drug suspension due to its mucoadhesive properties and nanosize. The nano spray dryer could serve as a one step technique toward formulating stable and effective nanosuspensions.

Design and optimization of gastro-retentive microballoons for enhanced bioavailability of cinnarizine.

This study is focused on the design of gastro-retentive drug delivery system composed of hollow microspheres (microballoons) for the sustained delivery of cinnarizine (CIN). The microballoons (MBs) were prepared by the emulsion solvent diffusion method using cellulose acetate butyrate (CAB) as the hosting polymer and absolute ethanol (ETH) and dichloromethane (DCM) as solvents. A 3(3) full factorial experimental design was adopted to study the effect of different variables and to find an optimum formula with desired properties. Prepared microballoons showed high drug loading capacities and controlled release behaviour. The optimum formulation was chosen on the basis of achieving maximum values for both drug loading capacity and release efficiency as well as having suitable size. The optimized MB (MB-F21) was composed of 200 mg CIN and 400 mg CAB with a DCM/ETH ratio of 2:1. Scanning electron microscopy for the optimum formulation showed a spherical outline with internal porous structure. An in vivo study using human volunteers was performed by determination of CIN concentration in the plasma using the liquid chromatography-mass spectrometry (LC-MS) method. Results proved the superiority of the designed formulation over the market product Stuval® tablets in bioavailability parameters comprising T max as well as area under the plasma CIN concentration-time curve (AUC0-24 h) and AUC0-∞ values. Also, the significantly greater value of mean residence time (MRT) in case of MB-F21 indicates its higher gastric residence time and proves the advantages of micro-multiparticulate dosage forms over conventional one.

A trial for the design and optimization of pH-sensitive microparticles for intestinal delivery of cinnarizine.

The aim of this study was to formulate a microparticulate delivery system to deliver cinnarizine (CIN) directly to its site of absorption to overcome its low oral bioavailability. Enteric microparticles were prepared by varying ratios of pH-sensitive polymers (Eudragit L100 and Eudragit S100). A full 3(3) factorial experimental design was adopted to evaluate the effect of variables (CIN concentration as well as Eudragit's concentration) on the tested parameters, namely, particle size (p.s.), drug entrapment efficiency (E.E.), and release efficiency (R.E.). Optimization was done using Design Expert® software to maximize E.E. and R.E. and minimize p.s. The optimized formula was characterized using scanning electron microscopy, differential scanning calorimetry, and X-ray diffractometry. In vivo studies conducted on human volunteers using LC-MS analysis revealed improved bioavailability of CIN-loaded enteric microparticles compared to the market product as detected from calculated pharmacokinetic parameters. This study reveals the usefulness of site-specific delivery of CIN.

Effervescent tablet formulation for enhanced patient compliance and the therapeutic effect of risperidone.

Risperidone is a poorly water soluble atypical antipsychotic drug. This work investigated the potential of developing risperidone effervescent tablets to facilitate drug administration and mask drug taste. The solid dispersion technique was selected to improve drug solubility due to its ease of scaling up, reproducibility and affordable cost. Thirty formulas were prepared adopting a 5(1).2(1).3(1) full factorial design. Trehalose, Inulin, pregelatinized starch, carboxymethylcellulose sodium and Eudragit E100 were used as hydrophilic carriers at different ratios. Rotovap, lyophilization and the kneading-oven were applied as solvent evaporation techniques. Differential scanning calorimetry, X-ray powder diffraction, Fourier transform infrared spectroscopy and scanning electron microscopy showed that the drug was present as amorphous material entrapped within the carrier matrix. Eight tablet blends were prepared using different effervescent mixture ratios with or without binder and lubricant/glidant mixture. All of the blends had acceptable flowability, acceptable effervescence times and immediate drug release that could not be achieved by any of the control formulas. The formula of choice contained 40% effervescent mixture, 5% starch, 1% boric acid, 1% aspartame and sufficient lactose. The relative bioavailability (RB) of risperidone from this formula was 161.41% with a significantly higher extent of absorption compared to the market conventional tablets. This formula may be promising in improving patient compliance and drug efficiency.

Enhancement of the intranasal delivery of insulin via a novel mucoadhesive Carbopol gel.

OBJECTIVES: The objectives of this study were to develop an intranasal insulin gel using Carbopol homogenization rather than neutralization and to examine the effectiveness of the gel compared with a subcutaneous injection. METHODS: Four factors, namely the molecular weight of polyethylene glycol (PEG), the concentration of Carbopol, the temperature of preparation and the type of absorption enhancer, were evaluated for their effect on viscosity and in-vitro insulin release. Bioavailability of insulin from selected formulations was compared with an intranasal solution and subcutaneous injection in rabbits. KEY FINDINGS: Increasing the molecular weight of PEG and Carbopol concentration increased the gel viscosity and changed the release mechanism from diffusion to case II transport. Applying heat during preparation resulted in a lower viscosity gel and increased the in-vitro insulin release. Among the two enhancers studied, sodium deoxycholate resulted in a higher viscosity gel than Tween 80. In vivo, the intranasal gel showed a stronger and longer hypoglycaemic effect with 1.7- and 3.1-fold higher maximum decrease in blood glucose level and area above the curve, respectively, compared with the subcutaneous injection. CONCLUSIONS: The homogenized Carbopol intranasal gel could be an efficient noninvasive way for insulin delivery but selection of gel components and method of preparation are critical for achieving the most desired effect.

Polymeric matrix system for prolonged delivery of tramadol hydrochloride, part II: biological evaluation.

This study is an extrapolation of our previous one (part I) concerned with the formulation and physicochemical evaluation of a novel, simple, monolayer, easy-to-use, cost-effective, and aesthetically acceptable bioadhesive transdermal patch for tramadol hydrochloride. The current work is focused on bioadhesion, skin tolerability, and pharmacodynamic evaluation. Using naked rat skin, chitosan-Eudragit NE30D (1:1) film attained best bioadhesive properties. During in vivo studies, it also showed a significantly extended analgesic effect compared to both oral formula and chitosan single polymeric film using the hot plate test method. All the polymeric films were skin tolerable for the intended period of application according to the Draize test. The success of our approach can proudly, positively contribute into the world of pain management and arguably push transdermal delivery to realize its great promise.

Inclusion complexes of tadalafil with natural and chemically modified beta-cyclodextrins. I: preparation and in-vitro evaluation.

The aim of this work was to investigate the inclusion complexation between tadalafil, a practically insoluble selective phosphodiesterase-5 inhibitor (PDE5), and two chemically modified beta-cyclodextrins: hydroxypropyl-beta-cyclodextrin (HP-beta-CD) and heptakis-[2,6-di-O-methyl]-beta-cyclodextrin (DM-beta-CD), in comparison with the natural beta-cyclodextrin (beta-CD) in order to improve the solubility and the dissolution rate of the drug in an attempt to enhance its bioavailability. Inclusion complexation was investigated in both the solution and the solid state. The UV spectral shift method indicated guest-host complex formation between tadalafil and the three cyclodextrins (CDs). The phase solubility profiles with all the used CDs were classified as A(p)-type, indicating the formation of higher order complexes. The complexation efficiency values (CE), which reflect the solubilizing power of the CDs towards the drug, could be arranged in the following order: DM-beta-CD>HP-beta-CD>beta-CD. Solid binary systems of tadalafil with CDs were prepared by kneading and freeze-drying techniques at molar ratios of 1:1, 1:3 and 1:5 (drug to CD). Physical mixtures were prepared in the same molar ratios for comparison. Physicochemical characterization of the prepared systems at molar ratio of 1:5 was studied using differential scanning calorimetry (DSC), X-ray diffractometry (XRD), and Fourier-transform infrared spectroscopy (FTIR). The results showed the formation of true inclusion complexes between the drug and both HP-beta-CD and DM-beta-CD using the freeze-drying method at molar ratio of 1:5. In contrast, crystalline drug was detectable in all other products. The dissolution of tadalafil from all the prepared binary systems was carried out to determine the most appropriate CD type, molar ratio, and preparation technique to prepare inclusion complexes to be used in the development of tablet formulation for oral delivery of tadalafil. The dissolution enhancement was increased on increasing the CD proportion in all the prepared systems. Both the CD type and the preparation technique played an important role in the performance of the system. Irrespective of the preparation technique, the systems prepared using HP-beta-CD and DM-beta-CD yielded better performance than the corresponding ones prepared using beta-CD. In addition, the freeze-drying technique showed superior dissolution enhancement than other methods especially when combined with the beta-CD derivatives.