ABSTRACT
We design, fabricate, and test photonic crystal heterostructure cavity lasers in the InP material system. A heterostructure cavity is formed by interfacing two different photonic crystals such that a dispersion maximum of the inner lattice lies within the band gap of the surrounding lattice. Feedback to slow light modes of the central region results in a lower threshold and single mode operation. The use of a kagome lattice as the inner defect area increases the semiconductor volume as well as the modal overlap with the gain material. We use a simulation technique to verify experimentally observed single mode operation as well as to quantify the effects of the heterostructure cavity formation.
Subject(s)
Crystallization/instrumentation , Crystallization/methods , Lasers , Computer-Aided Design , Equipment Design , Equipment Failure Analysis , Photons , Reproducibility of Results , Sensitivity and SpecificityABSTRACT
Noncontact long-range position sensing is desirable for a number of applications. We have designed and fabricated a monolithically integrated vertical-cavity surface-emitting laser (VCSEL) and p-type/intrinsic/n-type (PIN) photodetectors for optical position sensing. Calculations using the reflection from a periodic metallic corrugation as a position gauge indicate resolution in the submicron regime. High device uniformity is obtained using novel fabrication techniques. We observe a threshold current of 0.52 mA for the VCSELs and a detector responsivity of 0.38 A/W at 840 nm. The optical cross talk between VCSELs and detectors is also quantified.
