Bladder dose-surface maps and urinary toxicity: Robustness with respect to motion in assessing local dose effects.

The purpose of this study was to quantify the impact of inter-fraction modifications of bladder during RT of prostate cancer on bladder dose surface maps (DSM). Eighteen patients treated with daily image-guided Tomotherapy and moderate hypofractionation (70-72.8Gy at 2.5-2.6Gy/fr in 28 fractions and full bladder) were considered. Bladder contours were delineated on co-registered daily Megavoltage CT (MVCT) by a single observer and copied on the planning CT to generate dose-volume/surface histograms (DVH/DSH) and bladder DSMs. Discrepancies between planned and daily absorbed doses were analyzed through the average of individual systematic errors, the population systematic errors and the population random errors for the DVH/DSHs and DSMs. In total, 477 DVH/DSH and 472 DSM were available. DSH and DVH showed small population systematic errors of absolute surfaces (<3.4cm(2)) and volumes (<8.4cm(3)) at the highest doses. The dose to the posterior bladder base assessed on DSMs showed a mean systematic error below 1Gy, with population systematic and random errors within 4 and 3Gy, respectively. The region surrounding this area shows higher mean systematic errors (1-3Gy), population systematic (8-11Gy) and random (5-7Gy) errors. In conclusion, DVH/DSH and DSMs are quite stable with respect to inter-fraction variations in the high-dose region, within about 2cm from bladder base. Larger systematic variations occur in the anterior portion and cranially 2.5-3.5cm from the base. Results suggest that dose predictors related to the high dose area (including the trigone dose) are likely to be sufficiently reliable with respect to the expected variations due to variable bladder filling.

Targeted radionuclide therapy: theoretical study of the relationship between tumour control probability and tumour radius for a 32P/33P radionuclide cocktail.

As revealed by previous theoretical studies, targeted radionuclide therapy (TRT) that relies on a single beta-emitting radioisotope is likely to be inappropriate for clinical scenarios such as disseminated malignancy. For a patient with a vast number of tumours and metastases of largely differing sizes a high level of therapeutical efficiency might be achieved only for a restricted range of tumour sizes. This is due to the limited range of beta-electrons in human tissue, essentially causing the therapeutical impact to vary tremendously with tumour size. The dependence of curability on the tumour dimension is expected to be significantly altered if a radionuclide cocktail, consisting of a long-range and a short-range beta-emitter, such as (32)P and (33)P, is involved in the treatment. In this study, a radiation transport simulation was performed, using the MCNP4c2 Monte Carlo code, in order to investigate the relationship between tumour control probability (TCP) and tumour size, associated with concurrent use of (32)P and (33)P. Two different models of intratumoural distribution of cumulated activity were taken into account. One simulated an ideal radionuclide uptake in tumour tissue and the other referred to a limited radiotracer penetration. The results were examined in comparison to tumours targeted with pure (32)P, (33)P and (131)I. For both uptake scenarios a considerable reduction of the overall variation of TCP and thus an increasing chance of achieving tumour cure was observed for tumour sizes ranging from microscopic dimensions up to macroscopic diameters, if the targeted radionuclide treatment relies on a (32)P/(33)P cocktail. It was revealed that particular attention has to be given to the ratio of the (32)P and (33)P specific cumulated activities (SCA) in the tumour, since this is a significant determinant of the resulting behaviour of tumour control probability as the tumour diameter varies. This study suggests that a 32P/33P approach is more applicable to diseases that involve a variety of tumours and metastases differing in size.

High precision radiosurgery and technical standards.

BACKGROUND: A high degree of precision and accuracy in radiosurgery is a fundamental requirement for therapeutic success. Small radiation fields and steep dose gradients are clinically applied thus necessitating a dedicated quality assurance program in order to guarantee dosimetric and geometric accuracy. MATERIAL AND METHODS: A detailed analysis of the course of treatment independent of the irradiation technique used results in the so-called chain of uncertainties in radiosurgery (immobilisation, imaging, treatment planning system, definition of regions of interest, mechanical accuracy, dose planning, dose verification). Each link in this chain is analysed for accuracy and the established quality assurance procedures are discussed. A "System Test" was used to check the whole chain of uncertainties simultaneously. RESULTS: The tests described are compatible with published reports on quality assurance in radiosurgery. In terms of accuracy the weakest link in the chain of uncertainties is stereotactic MR imaging. Geometric overall accuracy measured in the "System Test" is less than 0.7 mm. CONCLUSION: The established quality assurance routines have clinically been validated. MR imaging dominates geometric overall accuracy in radiosurgery, which can be limited to less than 1 mm by an adequate quality assurance protocol.

Quality assurance in stereotactic radiosurgery/radiotherapy according to DIN 6875-1.

The new DIN ('Deutsche Industrie-Norm') 6875-1, which is currently being finalised, deals with quality assurance (QA) criteria and tests methods for linear accelerator and Gamma Knife stereotactic radiosurgery/radiotherapy including treatment planning, stereotactic frame and stereotactic imaging and a system test to check the whole chain of uncertainties. Our existing QA program, based on dedicated phantoms and test procedures, has been refined to fulfill the demands of this new DIN. The radiological and mechanical isocentre corresponded within 0.2 mm and the measured 50% isodose lines were in agreement with the calculated ones within less than 0.5 mm. The measured absorbed dose was within 3%. The resultant output factors measured for the 14-, 8- and 4-mm collimator helmet were 0.9870 +/- 0.0086, 0.9578 +/- 0.0057 and 0.8741 +/- 0.0202, respectively. For 170 consecutive tests, the mean geometrical accuracy was 0.48 +/- 0.23 mm. Besides QA phantoms and analysis software developed in-house, the use of commercially available tools facilitated the QA according to the DIN 6875-1 with which our results complied.

VOLUMESERIES: a software tool for target volume follow-up studies with computerized tomography and magnetic resonance imaging. Technical note.

In clinical follow-up studies after radiosurgery, imaging modalities such as computerized tomography (CT) and magnetic resonance (MR) imaging are used. Accurate determination of the residual lesion volume is necessary for realistic assessment of the effects of treatment. Usually, the diameters rather than the volume of the lesion are measured. To determine the lesion volume without using stereotactically defined images, the software program VOLUMESERIES has been developed. VOLUMESERIES is a personal computer-based image analysis tool. Acquired DICOM CT scans and MR image series can be visualized. The region of interest is contoured with the help of the mouse, and then the system calculates the volume of the contoured region and the total volume is given in cubic centimeters. The defined volume is also displayed in reconstructed sagittal and coronal slices. In addition, distance measurements can be performed to measure tumor extent. The accuracy of VOLUMESERIES was checked against stereotactically defined images in the Leksell GammaPlan treatment planning program. A discrepancy in target volumes of approximately 8% was observed between the two methods. This discrepancy is of lesser interest because the method is used to determine the course of the target volume over time, rather than the absolute volume. Moreover, it could be shown that the method was more sensitive than the tumor diameter measurements currently in use. VOLUMESERIES appears to be a valuable tool for assessing residual lesion volume on follow-up images after gamma knife radiosurgery while avoiding the need for stereotactic definition.

Resolution dependency of microstructural properties of cancellous bone based on three-dimensional mu-tomography.

Micro-computed tomography (microCT) is an emerging technique for the non-destructive assessment and analysis of the three-dimensional cancellous bone architecture. However, the procedures the procedures and applications used to quantify bone structures are not yet standardized. The aim of this study was to provide more insight in the resolution-dependency of microstructural properties of three-dimensional trabecular bone. Ten iliac crest bone biopsies were measured using a newly devised microCT system providing a nominal isotropic resolution of 14 microns. To study the resolution dependency the measured data were reconstructed on reduced image arrays with reduction factors ranging from 2 to 20. To assess the structural properties, morphometric parameters were computed based on a truly three-dimensional approach. The results showed a strong resolution dependency of the structural properties and that, if very precise results are needed, only the highest resolution will predict the correct values. Nevertheless, since the properties either decrease or increase monotonously up to a nominal resolution of about 175 microns, the values appear to be restorable using a suitable calibration procedure.