Tuning the Fermi Level of Graphene by Two-Dimensional Metals for Raman Detection of Molecules.

Graphene-enhanced Raman scattering (GERS) offers great opportunities to achieve optical sensing with a high uniformity and superior molecular selectivity. The GERS mechanism relies on charge transfer between molecules and graphene, which is difficult to manipulate by varying the band alignment between graphene and the molecules. In this work, we synthesized a few atomic layers of metal termed two-dimensional (2D) metal to precisely and deterministically modify the graphene Fermi level. Using copper phthalocyanine (CuPc) as a representative molecule, we demonstrated that tuning the Fermi level can significantly improve the signal enhancement and molecular selectivity of GERS. Specifically, aligning the Fermi level of graphene closer to the highest occupied molecular orbital (HOMO) of CuPc results in a more pronounced Raman enhancement. Density functional theory (DFT) calculations of the charge density distribution reproduce the enhanced charge transfer between CuPc molecules and graphene with a modulated Fermi level. Extending our investigation to other molecules such as rhodamine 6G, rhodamine B, crystal violet, and F16CuPc, we showed that 2D metals enabled Fermi level tuning, thus improving GERS detection for molecules and contributing to an enhanced molecular selectivity. This underscores the potential of utilizing 2D metals for the precise control and optimization of GERS applications, which will benefit the development of highly sensitive, specific, and reliable sensors.

Thermodynamic Limit for Excitonic Light-Emitting Diodes.

We derive the thermodynamic limit for organic light-emitting diodes (OLEDs), and show that strong exciton binding in these devices requires a higher voltage to achieve the same luminance as a comparable inorganic LED. The OLED overpotential, which does not reduce the power conversion efficiency, is minimized by having a small exciton binding energy, a long exciton lifetime, and a large Langevin coefficient for electron-hole recombination. Based on these results, it seems likely that the best phosphorescent and thermally activated delayed fluorescence OLEDs reported to date approach their thermodynamic limit. The framework developed here is broadly applicable to other excitonic materials, and should therefore help guide the development of low voltage LEDs for display and solid-state lighting applications.

Toward Nonepitaxial Laser Diodes.

Thin-film organic, colloidal quantum dot, and metal halide perovskite semiconductors are all being pursued in the quest for a wavelength-tunable diode laser technology that does not require epitaxial growth on a traditional semiconductor substrate. Despite promising demonstrations of efficient light-emitting diodes and low-threshold optically pumped lasing in each case, there are still fundamental and practical barriers that must be overcome to reliably achieve injection lasing. This review outlines the historical development and recent advances of each material system on the path to a diode laser. Common challenges in resonator design, electrical injection, and heat dissipation are highlighted, as well as the different optical gain physics that make each system unique. The evidence to date suggests that continued progress for organic and colloidal quantum dot laser diodes will likely hinge on the development of new materials or indirect pumping schemes, while improvements in device architecture and film processing are most critical for perovskite lasers. In all cases, systematic progress will require methods that can quantify how close new devices get with respect to their electrical lasing thresholds. We conclude by discussing the current status of nonepitaxial laser diodes in the historical context of their epitaxial counterparts, which suggests that there is reason to be optimistic for the future.

Electrochemical Doping of Halide Perovskites by Noble Metal Interstitial Cations.

Metal halide perovskites are an attractive class of semiconductors, but it has proven difficult to control their electronic doping by conventional strategies due to screening and compensation by mobile ions or ionic defects. Noble-metal interstitials represent an under-studied class of extrinsic defects that plausibly influence many perovskite-based devices. In this work, doping of metal halide perovskites is studied by electrochemically formed Au+ interstitial ions, combining experimental data on devices with a computational analysis of Au+ interstitial defects based on density functional theory (DFT). Analysis suggests that Au+ cations can be easily formed and migrate through the perovskite bulk via the same sites as iodine interstitials (Ii + ). However, whereas Ii + compensates n-type doping by electron capture, the noble-metal interstitials act as quasi-stable n-dopants. Experimentally, voltage-dependent, dynamic doping by current density-time (J-t), electrochemical impedance, and photoluminescence measurements are characterized. These results provide deeper insight into the potential beneficial and detrimental impacts of metal electrode reactions on long-term performance of perovskite photovoltaic and light-emitting diodes, as well as offer an alternative doping explanation for the valence switching mechanism of halide-perovskite-based neuromorphic and memristive devices.

Molecular polariton electroabsorption.

We investigate electroabsorption (EA) in organic semiconductor microcavities to understand whether strong light-matter coupling non-trivially alters their nonlinear optical [[Formula: see text]] response. Focusing on strongly-absorbing squaraine (SQ) molecules dispersed in a wide-gap host matrix, we find that classical transfer matrix modeling accurately captures the EA response of low concentration SQ microcavities with a vacuum Rabi splitting of [Formula: see text] meV, but fails for high concentration cavities with [Formula: see text] meV. Rather than new physics in the ultrastrong coupling regime, however, we attribute the discrepancy at high SQ concentration to a nearly dark H-aggregate state below the SQ exciton transition, which goes undetected in the optical constant dispersion on which the transfer matrix model is based, but nonetheless interacts with and enhances the EA response of the lower polariton mode. These results indicate that strong coupling can be used to manipulate EA (and presumably other optical nonlinearities) from organic microcavities by controlling the energy of polariton modes relative to other states in the system, but it does not alter the intrinsic optical nonlinearity of the organic semiconductor inside the cavity.

Sine-limiting microcell solar concentrators for space.

Microcell concentrating photovoltaics (µCPV) have the potential to improve performance and reduce the cost of solar power in space. Here, we introduce an ultracompact V-cone tailored edge ray (V-TERC) concentrator, rooted in nonimaging optics, which enables operation near the sine limit. Relative to previous space µCPV implementations, this concentrator design enables an approximate four-fold increase in concentration ratio for a given acceptance angle and specific power. We validate the design through ray tracing simulations and construction of a proof-of-concept system that consists of a 650 × 650 µm2 triple-junction microcell bonded to a 3.1 mm-thick prototype V-TERC optic. In outdoor testing on a sunny day, the system achieves a power conversion efficiency of 30% at a geometric gain of 137× with a specific power of 90 W kg-1 and an acceptance angle of ±4.5°. This is a record combination for µCPV to date and represents an important step toward increasing efficiency and lowering the cost of solar power in space.

Ultralow Index SiO2 Antireflection Coatings Produced via Magnetron Sputtering.

Antireflection (AR) coatings with graded refractive index profiles approaching air offer unparalleled AR performance but lack a scalable fabrication process that would enable them to be used more widely in applications such as architecture and solar energy conversion. This work introduces a sputtering-based sacrificial porogen process to fabricate multilayer nanoporous SiO2 coatings with tunable refractive index down to neff = 1.11. Using this approach, we demonstrate a step-graded bilayer AR coating with outstanding wide-angle AR performance (single side average reflectivity in the visible spectrum ranges from 0.2% at normal incidence to 0.7% at 40°), good adhesion, and promising environmental durability. These results open up a path to produce ultrahigh performance AR coatings over large area by using industrial-scale magnetron sputtering systems.

Structural and Elastic Properties of Empty-Pore Metalattices Extracted via Nondestructive Coherent Extreme UV Scatterometry and Electron Tomography.

Semiconductor metalattices consisting of a linked network of three-dimensional nanostructures with periodicities on a length scale <100 nm can enable tailored functional properties due to their complex nanostructuring. For example, by controlling both the porosity and pore size, thermal transport in these phononic metalattices can be tuned, making them promising candidates for efficient thermoelectrics or thermal rectifiers. Thus, the ability to characterize the porosity, and other physical properties, of metalattices is critical but challenging, due to their nanoscale structure and thickness. To date, only metalattices with high porosities, close to the close-packing fraction of hard spheres, have been studied experimentally. Here, we characterize the porosity, thickness, and elastic properties of a low-porosity, empty-pore silicon metalattice film (∼500 nm thickness) with periodic spherical pores (∼tens of nanometers), for the first time. We use laser-driven nanoscale surface acoustic waves probed by extreme ultraviolet scatterometry to nondestructively measure the acoustic dispersion in these thin silicon metalattice layers. By comparing the data to finite element models of the metalattice sample, we can extract Young's modulus and porosity. Moreover, by controlling the acoustic wave penetration depth, we can also determine the metalattice layer thickness and verify the substrate properties. Additionally, we utilize electron tomography images of the metalattice to verify the geometry and validate the porosity extracted from scatterometry. These advanced characterization techniques are critical for informed and iterative fabrication of energy-efficient devices based on nanostructured metamaterials.

Reproducibility of cavity-enhanced chemical reaction rates in the vibrational strong coupling regime.

One of the most exciting and debated aspects of polariton chemistry is the possibility that chemical reactions can be catalyzed by vibrational strong coupling (VSC) with confined optical modes in the absence of external illumination. Here, we report an attempt to reproduce the enhanced rate of cyanate ion hydrolysis reported by Hiura et al. [chemRxiv:7234721 (2019)] when the collective OH stretching vibrations of water (which is both the solvent and a reactant) are strongly coupled to a Fabry-Pérot cavity mode. Using a piezo-tunable microcavity, we reproduce the reported vacuum Rabi splitting but fail to observe any change in the reaction rate as the cavity thickness is tuned in and out of the strong coupling regime during a given experiment. These findings suggest that there are subtleties involved in successfully realizing VSC-catalyzed reaction kinetics and therefore motivate a broader effort within the community to validate the claims of polariton chemistry in the dark.

Exceptional point magneto-optic isolators.

We show that operating magneto-optic coupled ring isolators near an exceptional point (EP) fundamentally improves their tradeoff between isolation bandwidth and insertion loss. In analogy to EP sensors, operating a coupled ring isolator at an EP causes its isolation bandwidth to depend on the square root of the nonreciprocal phase shift (NRPS) instead of the usual linear dependence, thereby enhancing the bandwidth when the NRPS is small. In cases of practical interest, this behavior enables more than a 50% increase in 20 dB isolation bandwidth at 3 dB insertion loss for a given pair of rings. The advantage of EP operation grows in the vicinity of magneto-optic material resonances and should extend to other types of on-chip isolators that rely on similarly weak nonreciprocal perturbations.

Ultrafast Charge Transfer Dynamics at the Origin of Photoconductivity in Doped Organic Solids.

In spite of their growing importance for optoelectronic devices, the fundamental properties and photophysics of molecularly doped organic solids remain poorly understood. Such doping typically leads to a small fraction of free conductive charges, with most electronic carriers remaining Coulombically bound to the ionized dopant. Recently, we have reported photocurrent for devices containing vacuum-deposited TAPC (1,1-bis(4-bis(4-methylphenyl)aminophenyl)cyclohexane) doped with MoO3, showing that photoexcitation of charged TAPC molecules increases the concentration of free holes that contribute to conduction. Here, we elucidate the excited-state dynamics of such doped TAPC films to unravel the key mechanisms responsible for this effect. We demonstrate that excitation of different electronic transitions in charged and neutral TAPC molecules allows bound holes to overcome the Coulombic attraction to their MoO3 counterions, resulting in an enhanced yield of long-lived free carriers. This is caused by ultrafast back-and-forth shuffling of charges and excitation energy between adjacent cations and neutral molecules, competing with relatively slow nonradiative decay from higher excited states of TAPC•+. The light-induced generation of conductive carriers requires the coexistence of cationic and neutral TAPC, a favorable energy level alignment, and intermolecular interactions in the solid state.

Oxide-Free Three-Dimensional Germanium/Silicon Core-Shell Metalattice Made by High-Pressure Confined Chemical Vapor Deposition.

Metalattices are crystalline arrays of uniform particles in which the period of the crystal is close to some characteristic physical length scale of the material. Here, we explore the synthesis and properties of a germanium metalattice in which the ∼70 nm periodicity of a silica colloidal crystal template is close to the ∼24 nm Bohr exciton radius of the nanocrystalline Ge replica. The problem of Ge surface oxidation can be significant when exploring quantum confinement effects or designing electronically coupled nanostructures because of the high surface area to volume ratio at the nanoscale. To eliminate surface oxidation, we developed a core-shell synthesis in which the Ge metalattice is protected by an oxide-free Si interfacial layer, and we explore its properties by transmission electron microscopy (TEM), Raman spectroscopy, and electron energy loss spectroscopy (EELS). The interstices of a colloidal crystal film grown from 69 nm diameter spherical silica particles were filled with polycrystalline Ge by high-pressure confined chemical vapor deposition (HPcCVD) from GeH4. After the SiO2 template was etched away with aqueous HF, the Ge replica was uniformly coated with an amorphous Si shell by HPcCVD as confirmed by TEM-EDS (energy-dispersive X-ray spectroscopy) and Raman spectroscopy. Formation of the shell prevents oxidation of the Ge core within the detection limit of XPS. The electronic properties of the core-shell structure were studied by accessing the Ge 3d edge onset using STEM-EELS. A blue shift in the edge onset with decreasing size of Ge sites in the metalattices suggests quantum confinement of the Ge core. The degree of quantum confinement of the Ge core depends on the void sizes in the template, which is tunable by using silica particles of varying size. The edge onset also shows a shift to higher energy near the shell in comparison with the Ge core. This shift along with the observation of Ge-Si vibrational modes in the Raman spectrum indicate interdiffusion of Ge and Si. Both the size of the voids in the template and core-shell interdiffusion of Si and Ge can in principle be tuned to modify the electronic properties of the Ge metalattice.

Polaron Photoconductivity in the Weak and Strong Light-Matter Coupling Regime.

We investigate the potential for cavity-modified electron transfer in a doped organic semiconductor through the photocurrent that arises from exciting charged molecules (polarons). When the polaron optical transition is strongly coupled to a Fabry-Perot microcavity mode, we observe polaron polaritons in the photoconductivity action spectrum and find that their magnitude depends differently on applied electric field than photocurrent originating from the excitation of uncoupled polarons in the same cavity. Crucially, moving from positive to negative detuning causes the upper and lower polariton photocurrents to swap their field dependence, with the more polaronlike branch resembling that of an uncoupled excitation. These observations are understood on the basis of a phenomenological model in which strong coupling alters the Onsager dissociation of polarons from their dopant counterions by effectively increasing the thermalization length of the photoexcited charge carrier.

Nondestructive Measurements of the Mechanical and Structural Properties of Nanostructured Metalattices.

Metalattices are artificial 3D solids, periodic on sub-100 nm length scales, that enable the functional properties of materials to be tuned. However, because of their complex structure, predicting and characterizing their properties is challenging. Here we demonstrate the first nondestructive measurements of the mechanical and structural properties of metalattices with feature sizes down to 14 nm. By monitoring the time-dependent diffraction of short wavelength light from laser-excited acoustic waves in the metalattices, we extract their acoustic dispersion, Young's modulus, filling fraction, and thicknesses. Our measurements are in excellent agreement with macroscopic predictions and potentially destructive techniques such as nanoindentation and scanning electron microscopy, with increased accuracy over larger areas. This is interesting because the transport properties of these metalattices do not obey bulk predictions. Finally, this approach is the only way to validate the filling fraction of metalattices over macroscopic areas. These combined capabilities can enable accurate synthesis of nanoenhanced materials.

Design and demonstration of ultra-compact microcell concentrating photovoltaics for space.

Optical concentration can improve the efficiency and reduce the cost of photovoltaic power but has traditionally been too bulky, massive, and unreliable for use in space. Here, we explore a new ultra-compact and low-mass microcell concentrating photovoltaic (µCPV) paradigm for space based on the monolithic integration of transfer-printed microscale solar cells and molded microconcentrator optics. We derive basic bounds on the compactness as a function of geometric concentration ratio and angular acceptance, and show that a simple reflective parabolic concentrator provides the best combination of specific power, angular acceptance, and overall fabrication simplicity. This architecture is simulated in detail and validated experimentally with a µCPV prototype that is less than 1.7 mm thick and operates with six, 650 µm square triple-junction microcells at a geometric concentration ratio of 18.4×. In outdoor testing, the system achieves a terrestrial power conversion efficiency of 25.8 ± 0.2% over a ±9.5° angular range, resulting in a specific power of approximately 111 W/kg. These results lay the groundwork for future space µCPV systems and establish a realistic path to exceed 350 W/kg specific power at >33% power conversion efficiency by scaling down to even smaller microcells.

Higher order effects in organic LEDs with sub-bandgap turn-on.

Spin-dependent nonlinear processes in organic materials such as singlet-fission and triplet-triplet annihilation could increase the performance for photovoltaics, detectors, and light emitting diodes. Rubrene/C60 light emitting diodes exhibit a distinct low voltage (half-bandgap) threshold for emission. Two origins for the low voltage turn-on have been proposed: (i) Auger assisted energy up-conversion, and (ii) triplet-triplet annihilation. We test these proposals by systematically altering the rubrene/C60 interface kinetics by introducing thin interlayers. Quantitative analysis of the unmodified rubrene/C60 device suggests that higher order processes can be ruled out as the origin of the sub-bandgap turn-on. Rather, band-to-band recombination is the most likely radiative recombination process. However, insertion of a bathocuproine layer yields a 3-fold increase in luminance compared to the unmodified device. This indicates that suppression of parasitic interface processes by judicious modification of the interface allows a triplet-triplet annihilation channel to be observed.

Graded-Index Fluoropolymer Antireflection Coatings for Invisible Plastic Optics.

Plastic optics are used in an ever-expanding range of applications and yet a durable, high performance antireflection (AR) coating remains elusive for this material class. Here, we introduce a sacrificial porogen approach to produce ultralow refractive index nanoporous fluoropolymer AR coatings via thermal coevaporation of Teflon AF and the small molecule N, N'-bis(3-methylphenyl)- N, N'-diphenylbenzidine (NPD). Using this approach, we demonstrate a five-layer, step-graded AR coating that reduces the solar spectrum-averaged (400 < λ < 2000 nm) reflectance of acrylic plastic to <0.5% for incidence angles up to 40° and withstands over 3 months of outdoor rooftop exposure with minimal degradation. A trilayer coating optimized for the visible range yields luminous reflectivity down to ∼0.1%, effectively rendering double-side coated acrylic plastic invisible under room lighting conditions. Strong adhesion to most optical plastics, an outstanding combination of mechanical, chemical, and environmental durability, and compatibility with commercial vacuum coating systems should enable this AR technology to find widespread practical use.

Hybrid perovskite light emitting diodes under intense electrical excitation.

Hybrid perovskite semiconductors represent a promising platform for color-tunable light emitting diodes (LEDs) and lasers; however, the behavior of these materials under the intense electrical excitation required for electrically-pumped lasing remains unexplored. Here, we investigate methylammonium lead iodide-based perovskite LEDs under short pulsed drive at current densities up to 620 A cm-2. At low current density (J < 10 A cm-2), we find that the external quantum efficiency (EQE) depends strongly on the time-averaged history of the pulse train and show that this curiosity is associated with slow ion movement that changes the internal field distribution and trap density in the device. The impact of ions is less pronounced in the high current density regime (J > 10 A cm-2), where EQE roll-off is dominated by a combination of Joule heating and charge imbalance yet shows no evidence of Auger loss, suggesting that operation at kA cm-2 current densities relevant for a laser diode should be within reach.

Revealing the Importance of Energetic and Entropic Contributions to the Driving Force for Charge Photogeneration.

Despite significant recent progress, much about the mechanism for charge photogeneration in organic photovoltaics remains unknown. Here, we use conjugated block copolymers as model systems to examine the effects of energetic and entropic driving forces in organic donor-acceptor materials. The block copolymers are designed such that an electron donor block and an electron acceptor block are covalently linked, embedding a donor-acceptor interface within the molecular structure. This enables model studies in solution where processes occurring between one donor and one acceptor are examined. First, energy levels and dielectric constants that govern the driving force for charge transfer are systematically tuned and charge transfer within individual block copolymer chains is quantified. Results indicate that in isolated chains, a significant driving force of ∼0.3 eV is necessary to facilitate significant exciton dissociation to charge-transfer states. Next, block copolymers are cast into films, allowing for intermolecular interactions and charge delocalization over multiple chains. In the solid state, charge transfer is significantly enhanced relative to isolated block copolymer chains. Using Marcus Theory, we conclude that changes in the energetic driving force alone cannot explain the increased efficiency of exciton dissociation to charge-transfer states in the solid state. This implies that increasing the number of accessible states for charge transfer introduces an entropic driving force that can play an important role in the charge-generation mechanism of organic materials, particularly in systems where the excited state energy level is close to that of the charge-transfer state.