Normal hearing and verbal discrimination in real sounds environments.

INTRODUCTION: Human beings are constantly exposed to complex acoustic environments every day, which even pose challenges for individuals with normal hearing. Speech perception relies not only on fixed elements within the acoustic wave but is also influenced by various factors. These factors include speech intensity, environmental noise, the presence of other speakers, individual specific characteristics, spatial separatios of sound sources, ambient reverberation, and audiovisual cues. The objective of this study is twofold: to determine the auditory capacity of normal hearing individuals to discriminate spoken words in real-life acoustic conditions and perform a phonetic analysis of misunderstood spoken words. MATERIALS AND METHODS: This is a descriptive observational cross-sectional study involving 20 normal hearing individuals. Verbal audiometry was conducted in an open-field environment, with sounds masked by simulated real-word acoustic environment at various sound intensity levels. To enhance sound emission, 2D visual images related to the sounds were displayed on a television. We analyzed the percentage of correct answers and performed a phonetic analysis of misunderstood Spanish bisyllabic words in each environment. RESULTS: 14 women (70%) and 6 men (30%), with an average age of 26 ±â€¯5,4 years and a mean airway hearing threshold in the right ear of 10,56 ±â€¯3,52 dB SPL and in the left ear of 10,12 ±â€¯2,49 dB SPL. The percentage of verbal discrimination in the "Ocean" sound environment was 97,2 ±â€¯5,04%, "Restaurant" was 94 ±â€¯4,58%, and "Traffic" was 86,2 ±â€¯9,94% (p = 0,000). Regarding the phonetic analysis, the allophones that exhibited statistically significant differences were as follows: [o] (p = 0,002) within the group of vocalic phonemes, [n] (p = 0,000) of voiced nasal consonants, [r] (p = 0,0016) of voiced fricatives, [b] (p = 0,000) and [g] (p = 0,045) of voiced stops. CONCLUSION: The dynamic properties of the acoustic environment can impact the ability of a normal hearing individual to extract information from a voice signal. Our study demonstrates that this ability decreases when the voice signal is masked by one or more simultaneous interfering voices, as observed in a "Restaurant" environment, and when it is masked by a continuous and intense noise environment such as "Traffic". Regarding the phonetic analysis, when the sound environment was composed of continuous-low frequency noise, we found that nasal consonants were particularly challenging to identify. Furthermore in situations with distracting verbal signals, vowels and vibrating consonants exhibited the worst intelligibility.

Prospective study of sound localisation in patients with single sided deafness and asymmetric hearing loss treated with cochlear implant.

BACKGROUND AND OBJECTIVE: Sound localization plays a crucial role in our daily lives, enabling us to recognize voices, respond to alarming situations, avoid dangers, and navigate towards specific signals. However, this ability is compromised in patients with Single-Sided Deafness (SSD) and Asymmetric Hearing Loss (AHL), negatively impacting their daily functioning. The main objective of the study was to quantify the degree of sound source localization in patients with single-sided deafness or asymmetric hearing loss using a Cochlear Implant (CI) and to compare between the two subgroups. MATERIALS AND METHODS: This was a prospective, longitudinal, observational, single-center study involving adult patients diagnosed with profound unilateral or asymmetric sensorineural hearing loss who underwent cochlear implantation. Sound localization was assessed in a chamber equipped with seven speakers evenly distributed from -90º to 90º. Stimuli were presented at 1000 Hz and intensities of 65 dB, 70 dB, and 75 dB. Each stimulus was presented only once per speaker, totaling 21 presentations. The number of correct responses at different intensities was recorded, and angular error in degrees was calculated to determine the mean angular distance between the patient-indicated speaker and the speaker presenting the stimulus. Both assessments were conducted preoperatively without a cochlear implant and two years post-implantation. RESULTS: The total sample comprised 20 patients, with 9 assigned to the SSD group and 11 to the AHL group. The Preoperative Pure Tone Average (PTA) in free field was 31.7 dB in the SSD group and 41.8 dB in the AHL group. There was a statistically significant improvement in sound localization ability and angular error with the use of the cochlear implant at all intensities in both SSD and AHL subgroups. CONCLUSIONS: Cochlear implantation in patients with SSD and AHL enhances sound localization, reducing mean angular error and increasing the number of correct sound localization responses.

Variación de la impedancia eléctrica a lo largo de cinco años postimplantación y relación con el umbral de confort máximo (MCL) en adultos portadores de implante coclear / Variation of electrical impedance over 5 years post-implantation and relationship with the maximum comfort level (MCL) in adults with cochlear implants

Introducción El umbral de confort máximo o maximum comfort level (MCL), umbral eléctrico o threshold level (THR) e impedancia eléctrica cambian en el postoperatorio del implante coclear durante meses hasta estabilizarse. El objetivo de este artículo es establecer la variación durante cinco años posquirúrgicos de la impedancia, y su relación con MCL en adultos implantados unilateralmente. Métodos Estudio retrospectivo a cinco años, con 78 pacientes adultos implantados con MED-EL en un hospital terciario desde el año 2000 hasta 2015. Se analizó la variación de impedancia, MCL y relación entre ellos, en electrodos basales (9-12), medios (5-8) y apicales (1-4), realizando análisis inferencial ANOVA de medidas repetidas con comparaciones entre tiempos consecutivos, corregidas con criterio Bonferroni. Resultados Treinta y tres hombres (42,3%) y 45 mujeres (57,7%), con edad media 52,7 ± 14,6 años. Se consideró «estabilidad» el momento del seguimiento sin diferencias estadísticamente significativas entre una visita y la siguiente. Los cambios en la impedancia en electrodos medios dejaron de ser estadísticamente significativos a los tres meses, y en apicales a los seis meses, con valores medios de 5,84 y 6,43 kohms. MCL se estabilizó a los dos años en electrodos basales y apicales, y a los tres años en medios, con valores medios de 24,9, 22,7 y 25,6 qu. Hubo correlación entre MCL e impedancia en electrodos medios hasta 3 meses y en apicales hasta un año. Conclusiones La impedancia eléctrica desciende significativamente en electrodos medios y apicales hasta tres y seis meses. El MCL aumenta significativamente hasta dos años. La impedancia se relaciona con MCL hasta seis meses. (AU)

Introduction The maximum comfort level (MCL), threshold level (THR) and electrical impedance change in the postoperative period of the cochlear implant for months until they stabilize. The objective of this article is to establish the variation during 5 post-surgical years of impedance, and its relationship with MCL in unilaterally implanted adults. Methods Retrospective study over 5 years, with 78 adult patients implanted with MED-EL in a tertiary hospital from the year 2000 to 2015. The variation in impedance, MCL and the relationship between them were analyzed in basal (9-12), medial (5-8) and apical electrodes (1-4), performing an inferential ANOVA analysis of repeated measures with comparisons between consecutive times, corrected with Bonferroni criteria. Results 33 men (42.3%) and 45 women (57.7%), with a mean age of 52.7 ± 14.6 years. “Stability” was considered the time of follow-up without statistically significant differences between one visit and the next. Changes in impedance in medial electrodes ceased to be statistically significant at 3 months, and in apicals at 6 months, with mean values of 5.84 and 6.43 kohms. MCL stabilized at 2 years in basal and apical electrodes, and at 3 years in medial, with mean values of 24.9, 22.7, and 25.6 qu. There was a correlation between MCL and impedance in medium electrodes up to 3 months and in apical ones up to one year. Conclusions Electrical impedance drops significantly in medial and apical electrodes up to 3 and 6 months. MCL increases significantly up to two years. Impedance is related to MCL up to 6 months. (AU)

Variation of electrical impedance over 5 years post-implantation and relationship with the maximum comfort level (MCL) in adults with cochlear implants.

INTRODUCTION: The maximum comfort level (MCL), threshold level (THR) and electrical impedance change in the postoperative period of the cochlear implant for months until they stabilize. The objective of this article is to establish the variation during 5 post-surgical years of impedance, and its relationship with MCL in unilaterally implanted adults. METHODS: Retrospective study over 5 years, with 78 adult patients implanted with MED-EL in a tertiary hospital from the year 2000 to 2015. The variation in impedance, MCL and the relationship between them were analyzed in basal (9-12), medial (5-8) and apical electrodes (1-4), performing an inferential ANOVA analysis of repeated measures with comparisons between consecutive times, corrected with Bonferroni criteria. RESULTS: 33 men (42.3%) and 45 women (57.7%), with a mean age of 52.7±14.6 years. "Stability" was considered the time of follow-up without statistically significant differences between one visit and the next. Changes in impedance in medial electrodes ceased to be statistically significant at 3 months, and in apicals at 6 months, with mean values of 5.84 and 6.43kΩ. MCL stabilized at 2 years in basal and apical electrodes, and at 3 years in medial, with mean values of 24.9, 22.7, and 25.6qu. There was a correlation between MCL and impedance in medium electrodes up to 3 months and in apical ones up to one year. CONCLUSIONS: Electrical impedance drops significantly in medial and apical electrodes up to 3 and 6 months. MCL increases significantly up to two years. Impedance is related to MCL up to 6 months.

Microwave Resonators for Wearable Sensors Design: A Systematic Review.

The field of flexible electronics is undergoing an exponential evolution due to the demand of the industry for wearable devices, wireless communication devices and networks, healthcare sensing devices and the technology around the Internet of Things (IoT) framework. E-tex tiles are attracting attention from within the healthcare areas, amongst others, for providing the possibility of developing continuous patient monitoring solutions and customized devices to accommodate each patient's specific needs. This review paper summarizes multiple approaches investigated in the literature for wearable/flexible resonators working as antenna-based systems, sensors and filters with special attention paid to the integration to flexible materials, especially textiles. This review manuscript provides a general overview of the flexible resonators' advantages and drawbacks, materials, fabrication techniques and processes and applications. Finally, the main challenges and future prospects of wearable resonators are discussed.

Wearable Sensors for Respiration Monitoring: A Review.

This paper provides an overview of flexible and wearable respiration sensors with emphasis on their significance in healthcare applications. The paper classifies these sensors based on their operating frequency distinguishing between high-frequency sensors, which operate above 10 MHz, and low-frequency sensors, which operate below this level. The operating principles of breathing sensors as well as the materials and fabrication techniques employed in their design are addressed. The existing research highlights the need for robust and flexible materials to enable the development of reliable and comfortable sensors. Finally, the paper presents potential research directions and proposes research challenges in the field of flexible and wearable respiration sensors. By identifying emerging trends and gaps in knowledge, this review can encourage further advancements and innovation in the rapidly evolving domain of flexible and wearable sensors.

Textile Antenna Sensor in SIW Technology for Liquid Characterization.

This study showcases the creation of an innovative textile antenna sensor that utilizes a resonant cavity for the purpose of liquid characterization. The cavity is based on circular substrate integrated waveguide (SIW) technology. A hole is created in the middle of the structure where a pipe is used to inject the liquid under test. The pipe is covered by a metal sheath to enhance the electromagnetic field's penetration of the tube, thus increasing the device's sensitivity. The resonance frequency of the proposed system is altered when the liquid under test is inserted into the sensitive area of the structure. The sensing of the liquid is achieved by the measurement of its dielectric properties via the perturbation of the electric fields in the SIW configuration. The S11 measurement enables the extraction of the electromagnetic properties of the liquid injected into the pipe. Specifically, the dielectric constant of the liquid is determined by observing the resonance frequency shift relative to that of an air-filled pipe. The loss tangent of the liquid is extracted by comparing the variation in the quality factor with that of an air-filled pipe after eliminating the inherent losses of the structure. The proposed SIW antenna sensor demonstrates a high sensitivity of 0.7 GHz/Δεr corresponding to a dielectric constant range from 4 to 72. To the best of our knowledge, this article presents for the first time the ability of a fully textile SIW cavity antenna-based sensor to characterize the dielectric properties of a liquid under test and emphasizes its differentiating features compared to PCB-based designs. The unique attributes of the textile-based antenna stem from its flexibility, conformability, and compatibility with various liquids.

Incisional Hernia Following Open Pancreaticoduodenectomy: Incidence and Risk Factors at a Tertiary Care Centre.

(1) Background: Incisional hernia (IH) is one of the most common complications following open abdominal surgery. There is scarce evidence on its real incidence following pancreatic surgery. The purpose of this study is to evaluate the incidence and the risk factors associated with IH development in patients undergoing pancreaticoduodenectomy (PD). (2) Methods: We retrospectively reviewed all patients undergoing PD between 2014 and 2020 at our centre. Data were extracted from a prospectively held database, including perioperative and long-term factors. We performed univariate and multivariate analysis to detect those factors potentially associated with IH development. (3) Results: The incidence of IH was 8.8% (19/213 patients). Median age was 67 (33-85) years. BMI was 24.9 (14-41) and 184 patients (86.4%) underwent PD for malignant disease. Median follow-up was 23 (6-111) months. Median time to IH development was 31 (13-89) months. Six (31.5%) patients required surgical repair. Following univariate and multivariate analysis, preoperative hypoalbuminemia (OR 3.4, 95% CI 1.24-9.16, p = 0.01) and BMI ≥ 30 kg/m2 (OR 2.6, 95% CI 1.06-8.14, p = 0.049) were the only factors independently associated with the development of IH. (4) Conclusions: The incidence of IH following PD was 8.8% in a tertiary care center. Preoperative hypoalbuminemia and obesity are independently associated with IH occurrence following PD.

A Smart Chair to Monitor Sitting Posture by Capacitive Textile Sensors.

In this paper, a smart office chair with movable textile sensors to monitor sitting position during the workday is presented. The system consists of a presence textile capacitive sensor with different levels of activation with a signal conditioning device. The proposed system was integrated into an office chair to detect postures that could provoke musculoskeletal disorders or discomfort. The microcontroller measured the capacitance by means of a cycle count method and provided the position information in real time. The information could be analysed to set up warnings to prevent incorrect postures or the necessity to move. Five participants assumed a series of postures, and the results showed the workability of the proposed smart chair. The chair can be provided as a new tool for companies, hospitals, or other institutions to detect incorrect postures and monitor the postures of people with reduced mobility. This tool can optimise control procedures or prevent occupational risks.

Implant-supported full-arch rehabilitation with immediate loading using two different digital impression techniques: a case report with 2-year follow-up.

Immediate full-arch loading is a highly complex and technique-sensitive procedure. Digital impression techniques aim to replace conventional analog systems to carry out dental treatments in a more predictive, safer, and less time-consuming way. This case report describes a patient with a guarded periodontal prognosis, who was rehabilitated with implant-supported fixed prostheses after full-mouth extractions. Immediate full-arch loading was performed by means of two digital impression systems: photogrammetric technology with PIC dental in the maxillary arch, and MedicalFit in the mandible. Immediate provisional prostheses in acrylic resin (polymethyl methacrylate) were milled and placed within 12 hours after implant placement surgeries. Both provisional structures fitted properly providing adequate esthetics and function. After the implant osseointegration period, final digital impressions were registered, and definitive zirconia full-arch implant-supported prostheses were delivered. The 24-month follow-up did not show biologic or mechanical complications.

Wireless Communication Platform Based on an Embroidered Antenna-Sensor for Real-Time Breathing Detection.

Wearable technology has been getting more attention for monitoring vital signs in various medical fields, particularly in breathing monitoring. To monitor respiratory patterns, there is a current set of challenges related to the lack of user comfort, reliability, and rigidity of the systems, as well as challenges related to processing data. Therefore, the need to develop user-friendly and reliable wireless approaches to address these problems is required. In this paper, a novel, full, compact textile breathing sensor is investigated. Specifically, an embroidered meander dipole antenna sensor integrated into an e-textile T-shirt with a Bluetooth transmitter for real-time breathing monitoring was developed and tested. The proposed antenna-based sensor is designed to transmit data over wireless communication networks at 2.4 GHz and is made of a silver-coated nylon thread. The sensing mechanism of the proposed system is based on the detection of a received signal strength indicator (RSSI) transmitted wirelessly by the antenna-based sensor, which is found to be sensitive to stretch. The respiratory system is placed on the middle of the human chest; the area of the proposed system is 4.5 × 0.48 cm2, with 2.36 × 3.17 cm2 covered by the transmitter module. The respiratory signal is extracted from the variation of the RSSI signal emitted at 2.4 GHz from the detuned embroidered antenna-based sensor embedded into a commercial T-shirt and detected using a laptop. The experimental results demonstrated that breathing signals can be acquired wirelessly by the RSSI via Bluetooth. The RSSI range change was from -80 dBm to -72 dBm, -88 dBm to -79 dBm and -85 dBm to -80 dBm during inspiration and expiration for normal breathing, speaking and movement, respectively. We tested the feasibility assessment for breathing monitoring and we demonstrated experimentally that the standard wireless networks, which measure the RSSI signal via standard Bluetooth protocol, can be used to detect human respiratory status and patterns in real time.

Power output and hearing performance in osseointegrated auditory devices.

BACKGROUND AND OBJECTIVE: Osseointegrated auditory devices are hearing gadgets that use the bone conduction of sound to produce hearing improvement. The mechanisms and factors that contribute to this sound transmission have been widely studied, however, there are other aspects that remain unknown, for instance, the influence of the processor power output. The aim of this study was to know if there is any relationship between the power output created by the devices and the hearing improvement that they achieve. MATERIALS Y METHODS: 44 patients were implanted with a percutaneous Baha® 5 model. Hearing thresholds in pure tone audiometry, free-field audiometry, and speech recognition (in quiet and in noise) were measured pre and postoperatively in each patient. The direct bone conduction thresholds and the power output values from the processors were also obtained. RESULTS: The pure tone average threshold in free field was 39.29 dB (SD = 9.15), so that the mean gain was 29.18 dB (SD = 10.13) with the device. This involved an air-bone gap closure in 63.64% of patients. The pure tone average threshold in direct bone conduction was 27.6 dB (SD = 10.91), which was 8.4 dB better than the pure tone average threshold via bone conduction. The mean gain in speech recognition was 39.15% (SD = 23.98) at 40 dB and 36.66% (SD = 26.76) at 60 dB. The mean gain in the signal-to-noise ratio was -5.9 dB (SD = 4.32). On the other hand, the mean power output values were 27.95 dB µN (SD = 6.51) in G40 and 26.22 dB µN (SD = 6.49) in G60. When analysing the relationship between bone conduction thresholds and G40 and G60 values, a correlation from the frequency of 1000 Hz was observed. However, no statistically significant association between power output, functional gain or speech recognition gain was found. CONCLUSIONS: The osseointegrated auditory devices generate hearing improvement in tonal thresholds and speech recognition, even in noise. Most patients closed the air-bone gap with the device. There is a direct relationship between the bone conduction threshold and the power output values from the processor, but only in mid and high frequencies. However, the relationship between power output and gain in speech recognition is weaker. Further investigation of contributing factors is necessary.

Análisis de la potencia de salida y del rendimiento auditivo de los dispositivos auditivos osteointegrados / Power output and hearing performance in osseointegrated auditory devices

Antecedentes y objetivos: Los dispositivos auditivos osteointegrados utilizan la transmisión del sonido por vía ósea para producir una mejoría auditiva. Los mecanismos y factores que intervienen en esta transmisión han sido ampliamente estudiados, sin embargo, existen otros aspectos que no conocemos, por ejemplo, la influencia que tiene la potencia de salida del procesador. El objetivo principal de este estudio fue conocer si existe alguna relación entre la potencia que emiten estos dispositivos y la mejoría auditiva que producen. Materiales y métodos: Hemos realizado un estudio en 44 pacientes portadores de un Baha® 5 percutáneo. De cada paciente se obtuvieron los umbrales de vía aérea y ósea en audiometría tonal liminar, en audiometría en campo libre, y en audiometría verbal en silencio y con ruido de fondo, tanto previa como posteriormente a la implantación. También se recogieron los umbrales de conducción ósea directa a través del procesador y los valores de ganancia en la potencia de salida del procesador. (AU)

Background and objective: Osseointegrated auditory devices are hearing gadgets that use the bone conduction of sound to produce hearing improvement. The mechanisms and factors that contribute to this sound transmission have been widely studied, however, there are other aspects that remain unknown, for instance, the influence of the processor power output. The aim of this study was to know if there is any relationship between the power output created by the devices and the hearing improvement that they achieve. Materials and methods: Forty-four patients were implanted with a percutaneous Baha® 5 model. Hearing thresholds in pure tone audiometry, free-field audiometry, and speech recognition (in quiet and in noise) were measured pre and postoperatively in each patient. The direct bone conduction thresholds and the power output values from the processors were also obtained. (AU)

Evolution of HCV associated porphyria cutanea tarda after HCV sustained virologic response by direct acting antivirals / Evolución de la porfiria cutánea tarda asociada al VHC tras obtenerse respuesta virológica sostenida del VHC mediante el uso de antivirales de acción directa

Objectives: Porphyria cutanea tarda (PCT) is common and usually associated with HCV chronic infection and HFE polymorphisms. Since DAA IFN-free regimens availability, SVR for HCV is nearly a constant and we wonder whether HCV SVR determine PCT evolution.Methods: Retrospective observational study including patients with HCV associated PCT from the Gastroenterology and Infectious Diseases Departments at our Hospital, treated with DAA (Apr/2015–Apr/2017). Clinical variables of PCT were collected at PCT diagnosis, after PCT treatment, before DAA use and after SVR achievement. UROD activity and C282Y/H63D polymorphisms were registered. SPSS 22.0.Results: 13 HCV-PCT patients included: median age 52.5 years; 4 females; 8 HCV/HIV co-infected (all on undetectable viral load). Classical PCT factors: 12 smoked, 9 alcohol abuse, 6 former IDU. 10 type I PCT and 1 type II PCT. HFE polymorphism: 2 cases with C282Y/H63D; H63D polymorphism in 8. PCT manifestations resolved with PCT treatment in 4 patients, almost completely in 7 patients, 1 patient referred stabilization and one worsened. After DAA treatment all the residual lesions resolved, what always led to specific treatment interruption.Conclusions: Our series of cases of HCV-associated PCT shows that SVR after DAA treatment leads to PCT resolution. Porphyrin levels are not needed after ending PCT specific treatment interruption when there are no residual skin lesions in HCV-associated PCT.(AU)

Objetivos: La porfiria cutánea tarda (PCT) es un trastorno frecuentemente asociado con la infección por VHC y los polimorfismos HFE. Desde la aparición de los AAD en regímenes libres de IFN, la RVS para el VHC es casi universal. Nos preguntamos si la RVS del VHC determina la evolución de la PCT asociada al VHC.Métodos: Estudio observacional retrospectivo con pacientes con PCT asociada al VHC atendidos en Gastroenterología y Enfermedades Infecciosas en nuestro centro, tratados con AAD (abril 2015 - abril 2017). Se registra información relacionada con la PCT en el momento del diagnóstico, tras iniciar tratamiento para la PCT, antes de AAD y tras RVS. Analizamos la actividad UROD y los polimorfismos C282Y/H63D. SPSS 22.0.Resultados: Se incluyen 13 pacientes con PCT asociada al VHC: edad mediana 52,5 años; 4 mujeres; 8 coinfectados VHC/VIH (todos con VIH indetectable). Factores asociados a PCT: 12 fumadores, 9 alcohol, 6 ADVP. Hubo 10 PCT clasificadas como tipo I y una PCT tipo II. HFE: 2 casos C282Y/H63D; H63D presente en 8. Tras iniciar tratamiento clásico para PCT los síntomas se resolvieron completamente en 4 casos, casi completamente en 7, se estabilizaron en un paciente y empeoraron en un paciente. Tras la RVS con AAD desaparecieron las lesiones residuales en los pacientes que las presentaban, lo que llevó a interrumpir todos los tratamientos para la PCT.Conclusiones: Nuestra serie de casos de PCT asociada al VHC muestra que la RVS para el VHC tras AAD conduce siempre a la curación de la PCT. Según esto no sería necesaria la determinación de porfirinas tras finalizar la terapia específica para la PCT cuando no haya lesiones cutáneas residuales en la PCT asociada al VHC.(AU)

Impact of the implementation of a Sepsis Code Program in medical patient management: a cohort study in an Internal Medicine ward / Impacto de la implementación del Programa Código Sepsis en una planta de hospitalización médica: estudio de una cohorte de pacientes de Medicina Interna

Introduction. Sepsis is the main cause of death in hospitals and the implementation of diagnosis and treatment bundles has shown to improve its evolution. However, there is alack of evidence about patients attended in conventional units.Methods. A 3-year retrospective cohort study was conducted. Patients hospitalized in Internal Medicine units withsepsis were included and assigned to two cohorts according toSepsis Code (SC) activation (group A) or not (B). Baseline andevolution variables were collected.Results. A total of 653 patients were included. In 296 cases SC was activated. Mean age was 81.43 years, median Charlson comorbidity index (CCI) was 2 and 63.25% showed somefunctional disability. More bundles were completed in group A:blood cultures 95.2% vs 72.5% (p < 0.001), extended spectrumantibiotics 59.1% vs 41.4% (p < 0.001), fluid resuscitation96.62% vs 80.95% (p < 0.001). Infection control at 72 hourswas quite higher in group A (81.42% vs 55.18%, odds ratio3.55 [2.48-5.09]). Antibiotic was optimized more frequently ingroup A (60.77% vs 47.03%, p 0.008). Mean in-hospital staywas 10.63 days (11.44 vs 8.53 days, p < 0.001). Complicationsduring hospitalization appeared in 51.76% of patients, especially in group B (45.95% vs 56.58%, odds ratio 1.53 [1.12-2.09]). Hospital readmissions were higher in group A (40% vs24.76%, p < 0.001). 28-day mortality was significantly lower ingroup A (20.95% vs 42.86%, odds ratio 0.33 [0.23-0.47]).Conclusions. Implementation of SC seems to be effectivein improving short-term outcomes in IM patients, althoughtherapy should be tailored in an individual basis (AU)

Introducción. La sepsis es la principal causa de muerte enlos hospitales y la implantación de códigos para su manejo hademostrado mejorar su evolución. Sin embargo, es escasa laevidencia relativa a los pacientes atendidos en unidades médicas convencionales.Métodos. Se realizó un estudio de cohortes retrospectivode 3 años. Se incluyeron pacientes con sepsis hospitalizados enunidades de Medicina Interna y se asignaron a dos cohortessegún la activación del Código Sepsis (CS) (grupo A) o no (B).Se recogieron variables basales y de evolución.Resultados. Se incluyeron 653 pacientes. En 296 casos seactivó el SC. La edad media fue de 81,43 años, la mediana delíndice de comorbilidad de Charlson (ICC) fue de 2 y el 63,25%presentaba alguna limitación funcional. Se realizaron más acciones diagnósticas y terapéuticas en el grupo A: hemocultivos95,2% vs 72,5% (p < 0,001), antibióticos de espectro extendido59,1% vs 41,4% (p < 0,001), reanimación con líquidos 96,62%vs 80,95% (p < 0,001). El control de la infección a las 72 horasfue superior en el grupo A (81,42% vs 55,18%, odds ratio 3,55[2,48-5,09]). La optimización de los antibióticos fue más frecuente en el grupo A (60,77% vs 47,03%, p 0,008). La estanciamedia en el hospital fue de 10,63 días (11,44 vs 8,53 días, p <0,001). Aparecieron complicaciones durante la hospitalizaciónen el 51,76% de los pacientes, especialmente en el grupo B(45,95% vs 56,58%, odds ratio 1,53 [1,12-2,09]). Los pacientesdel grupo A reingresaron más (40% vs 24,76%, p < 0,001). Lamortalidad a los 28 días fue significativamente menor en elgrupo A (20,95% frente a 42,86%, odds ratio 0,33 [0,23-0,47]). (AU)

Evolution of HCV associated porphyria cutanea tarda after HCV sustained virologic response by direct acting antivirals.

OBJECTIVES: Porphyria cutanea tarda (PCT) is common and usually associated with HCV chronic infection and HFE polymorphisms. Since DAA IFN-free regimens availability, SVR for HCV is nearly a constant and we wonder whether HCV SVR determine PCT evolution. METHODS: Retrospective observational study including patients with HCV associated PCT from the Gastroenterology and Infectious Diseases Departments at our Hospital, treated with DAA (Apr/2015-Apr/2017). Clinical variables of PCT were collected at PCT diagnosis, after PCT treatment, before DAA use and after SVR achievement. UROD activity and C282Y/H63D polymorphisms were registered. SPSS 22.0. RESULTS: 13 HCV-PCT patients included: median age 52.5 years; 4 females; 8 HCV/HIV co-infected (all on undetectable viral load). Classical PCT factors: 12 smoked, 9 alcohol abuse, 6 former IDU. 10 type I PCT and 1 type II PCT. HFE polymorphism: 2 cases with C282Y/H63D; H63D polymorphism in 8. PCT manifestations resolved with PCT treatment in 4 patients, almost completely in 7 patients, 1 patient referred stabilization and one worsened. After DAA treatment all the residual lesions resolved, what always led to specific treatment interruption. CONCLUSIONS: Our series of cases of HCV-associated PCT shows that SVR after DAA treatment leads to PCT resolution. Porphyrin levels are not needed after ending PCT specific treatment interruption when there are no residual skin lesions in HCV-associated PCT.

Clinical Evaluation of Dental Implants with a Double Acid-Etched Surface Treatment: A Cohort Observational Study with Up to 10-Year Follow-Up.

BACKGROUND AND OBJECTIVES: The main purpose of this study was to evaluate the survival and success rates of dental implants with a double acid-etched surface treatment with evaluation times up to 10 years post-loading. Materials and Methods: This study was conducted at a hospital oral surgery and implantology unit. It included 111 dental implants with a double acid-etched surface. Three groups were created: Group 1 (1-3 years loading), Group 2 (3-5 years loading), and Group 3 (over 5 years loading). Probing depth, resonance frequency analysis (ISQ value), and marginal bone loss were evaluated. Results: The data obtained underwent statistical analysis. Overall, 78 patients were included in the study, who received, in total, 111 dental implants, all replacing single teeth. Mean probing depth was 3.03 mm and mean ISQ was 65.54. Regarding marginal bone loss, in Group 1, 67.6% of implants did not undergo any thread loss, in Group 2, 48.3%, and in Group 3, 59.6%; 59.10% of all implants did not present thread loss with a mean bone loss of 0.552 mm. The implant survival rate was 99.1%, and the success rate was 96.37%. Conclusions: Implants with a double acid-etched surface showed excellent success rates in terms of marginal bone loss, ISQ, and probing depth after up to 10 years of loading, making them a clinically predictable treatment option. Future studies are needed to compare this implant surface with other types in different restorative situations.

Long-Term Clinical Behavior and Complications of Intentionally Tilted Dental Implants Compared with Straight Implants Supporting Fixed Restorations: A Systematic Review and Meta-Analysis.

The aim of this study was to assess the long-term clinical behavior of straight implants in comparison with intentionally tilted dental implants (ITDI) supporting fixed restorations in partial or total edentulous arches, analyzing implant survival and success rates, complications, and marginal bone loss (MBL) after >5 years of function. An electronic search was conducted in five electronic databases (MEDLINE/Pubmed, Embase, Web of Science, Scopus, and Cochrane Central Register of Controlled Trials) supplemented by a manual search. The electronic and manual search identified 1853 articles, of which 8 articles were selected for analysis. Out of a total of 3987 dental implants, 2036 were axial dental implants and 1951 tilted. Similar results were found in implant survival or overall implant success rates. Moreover, no statistically significant differences were found in MBL (p = 0.369; MD 0.116 mm (-0.137; 0.369) 95% CI) The prosthodontic/biological complications reported in the articles were very diverse and irregularly distributed. This systematic review suggests that there is no difference between tilted compared with straight dental implants in the medium-long term (>5 years). However, further research is needed to generate long-term data and confirm the present review's findings.

Power output and hearing performance in osseointegrated auditory devices. / Análisis de la potencia de salida y del rendimiento auditivo de los dispositivos auditivos osteointegrados.

BACKGROUND AND OBJECTIVE: Osseointegrated auditory devices are hearing gadgets that use the bone conduction of sound to produce hearing improvement. The mechanisms and factors that contribute to this sound transmission have been widely studied, however, there are other aspects that remain unknown, for instance, the influence of the processor power output. The aim of this study was to know if there is any relationship between the power output created by the devices and the hearing improvement that they achieve. MATERIALS AND METHODS: Forty-four patients were implanted with a percutaneous Baha® 5 model. Hearing thresholds in pure tone audiometry, free-field audiometry, and speech recognition (in quiet and in noise) were measured pre and postoperatively in each patient .The direct bone conduction thresholds and the power output values from the processors were also obtained. RESULTS: The pure tone average threshold in free field was 39.29dB (SD 9.15), so that the mean gain was 29.18dB (SD 10.13) with the device. This involved an air-bone gap closure in 63.64% of patients. The pure tone average threshold in direct bone conduction was 27.6dB (SD 10.91), which was 8.4dB better than the pure tone average threshold via bone conduction. The mean gain in speech recognition was 39.15% (SD 23.98) at 40dB and 36.66% (SD 26.76) at 60dB. The mean gain in the signal-to-noise ratio was -5.9dB (SD 4.32). On the other hand, the mean power output values were 27.95dB µN (SD 6.51) in G40 and 26.22dB µN (SD 6.49) in G60. When analysing the relationship between bone conduction thresholds and G40 and G60 values, a correlation from the frequency of 1,000Hz was observed. However, no statistically significant association between power output, functional gain or speech recognition gain was found. CONCLUSIONS: The osseointegrated auditory devices generate hearing improvement in tonal thresholds and speech recognition, even in noise. Most patients closed the air-bone gap with the device. There is a direct relationship between the bone conduction threshold and the power output values from the processor, but only in mid and high frequencies. However, the relationship between power output and gain in speech recognition is weaker. Further investigation of contributing factors is necessary.

Comparison of silver-plated nylon (Ag/PA66) e-textile and Ag/AgCl electrodes for bioelectrical impedance analysis (BIA).

Recently, researchers have adapted Bioelectrical Impedance Analysis (BIA) as a new approach to objectively monitor wounds. They have indicated various BIA parameters associated to specific wound types can be linked to wound healing through trend analysis relative to time. However, these studies are conducted using wet electrodes which have been identified as possessing several shortcomings, such as unstable measurements. Thus, the adaption of e-textile electrodes has become an area of interest in measuring biosignals. E-textile electrodes are known to possess a significantly large polarization impedance (Zp) that potentially influences these biosignal measurements. In this study we aim to identify the suitability of e-textile electrodes to monitor wounds using BIA methodologies. By adapting suggested methodologies conducted in-vivo from previous studies, we used an ex-vivo model to observe the behaviour of e-textile electrodes relative to time. This was compared to common clinical wet electrodes, specifically Ag/AgCl. The objective of this study was to identify the BIA parameters that can be used to monitor wounds with e-textile electrodes. By analysing the BIA parameters relative to time, we observed the influence ofZpon these parameters.