Cellulose fibres enhance the function of hemostatic composite medical sealants.

Tissue adhesives and sealants offer promising alternatives to traditional wound closure methods, but the existing trade-off between biocompatibility and strength is still a challenge. The current study explores the potential of a gelatin-alginate-based hydrogel, cross-linked with a carbodiimide, and loaded with two functional fillers, the hemostatic agent kaolin and cellulose fibres, to improve the hydrogel's mechanical strength and hemostatic properties for use as a sealant. The effect of the formulation parameters on the mechanical and physical properties was studied, as well as the biocompatibility and microstructure. The incorporation of the two functional fillers resulted in a dual micro-composite structure, with uniform dispersion of both fillers within the hydrogel, and excellent adhesion between the fillers and the hydrogel matrix. This enabled to strongly increase the sealing ability and the tensile strength and modulus of the hydrogel. The fibres' contribution to the enhanced mechanical properties is more dominant than that of kaolin. A combined synergistic effect of both fillers resulted in enhanced sealing ability (247%), tensile strength (400%), and Young's modulus (437%), compared to the unloaded hydrogel formulation. While the incorporation of kaolin almost did not affect the physical properties of the hydrogel, the incorporation of the fibres strongly increased the viscosity and decreased the gelation time and swelling degree. The cytotoxicity tests indicated that all studied formulations exhibited high cell viability. Hence, the studied new dual micro-composite hydrogels may be suitable for medical sealing applications, especially when it is needed to get a high sealing effect within a short time. The desired hemostatic effect is obtained due to kaolin incorporation without affecting the physical properties of the sealant. Understanding the effects of the formulation parameters on the hydrogel's properties enables the fitting of optimal formulations for various medical sealing applications.

Bupivacaine-eluting soy protein structures for controlled release and localized pain relief: An in vitro and in vivo study.

Burn pain is known to be excruciating, and while burn care has greatly advanced, treatment for burn-related pain is lacking. Current pain relief methods include systemic administration of analgesics, which does not provide high drug concentration at the wound site. In the present study, soy protein was used as the base material for bupivacaine-loaded hybrid wound dressings. The effect of the formulation on the drug release profile was studied using high performance liquid chromatography, and the cytotoxicity was tested on human fibroblasts. A second-degree burn model in rats was used to quantify the efficacy of the wound dressings in vivo, using the Rat Grimace Scale. All tested films exhibited high biocompatibility, and the drug release profiles showed rapid release during the initial 5 hr and a continuous slower release for another 24 hr. Significant pain relief was achieved in the animal trials, proving a decrease of 51-68% in pain levels during days 1-3 post-burn. Hence, the results indicate a safe and controlled bupivacaine release for a period of more than 24 hr, effectively treating pain caused by second-degree burns. The understanding of the formulation-properties effects, together with our in vivo study, enables to advance this field toward tailorable systems with high therapeutic potential.

In vitro characterization of novel multidrug-eluting soy protein wound dressings.

Polymers derived from natural sources are of interest in the scientific and medical communities, especially soy protein which exhibits low immunogenicity and good mechanical properties, and supports cell proliferation. Soy protein is cost-effective compared to other natural polymers and is attractive also due to its non-animal origin and relatively long storage stability. In the current study, hybrid film structures were developed and studied as a novel wound dressing platform with controlled release of three bioactive agents. The dense top layer is designed to provide mechanical support, control the water vapor permeability and to elute the antibiotic drug cloxacillin and the analgesic drug bupivacaine to the wound site. The porous sub-layer is designed to absorb the wound exudates and release the hemostatic agent tranexamic acid for bleeding control. The results show that the formulation parameters, i.e. crosslinker and plasticizer concentrations, affected the mechanical properties of the wound dressings as well as relevant physical properties (water vapor transmission rate and swelling kinetics), but had almost no effect on the drug-release profiles. While the antibiotic drug and the analgesic drug were released within several hours, the hemostatic agent was released within several minutes, according to the well designed hybrid structure. In conclusion, our novel soy protein hybrid wound dressings are biocompatible, can deliver various drugs simultaneously in a controlled fashion for each drug individually, and can be adjusted to suit various types of wounds by altering their properties through formulation effects.

Catheter Injectable Hydrogel-Based Scaffolds for Tissue Engineering Applications in lung disease.

BACKGROUND: Chronic lung diseases, especially emphysema and pulmonary fibrosis, are the third leading cause of mortality worldwide. Their treatment includes symptom alleviation, slowing of the disease progression, and ultimately organ transplant. Regenerative medicine represents an attractive alternative. OBJECTIVES: To develop a dual approach to lung therapy by engineering a platform dedicated to both remodeling pulmonary architecture (bronchoscopic lung volume reduction) and regeneration of lost respiratory tissue (scaffold). METHODS: The authors developed a hydrogel scaffold based on the natural polymers gelatin and alginate. The unique physical properties allow its injection through long catheters that pass through the working channel of a bronchoscope. The scaffold might reach the diseased area; thus, serving a dual purpose: remodeling the lung architecture as a lung volume reduction material and developing a platform for tissue regeneration to allow for cell or organoid implant. RESULTS: The authors' novel hydrogel scaffold can be injected through long catheters, exhibiting the physical and mechanical properties necessary for the dual treatment objectives. Its biocompatibility was analyzed on human fibroblasts and mouse mesenchymal cells. Cells injected with the scaffold through long narrow catheters exhibited at least 70% viability up to 7 days. CONCLUSIONS: The catheter-injectable gelatin-alginate hydrogel represents a new concept, which combines tissue engineering with minimal invasive procedure. It is an inexpensive and convenient to use alternative to other types of suggested scaffolds for lung tissue engineering. This novel concept may be used for additional clinical applications in regenerative medicine.