Malignancy around implants in patients with a history of a potentially malignant or malignant lesion: a systematic review.

The majority of problematic conditions resulting from dental implant treatment are inflammatory in character, but certain isolated occurrences of primary oral squamous cell carcinoma (OSCC) have been discovered in the area of implants. The goal of this study was to examine whether there is a link between dental implants and the development of OSCC in patients who have a history of a potentially malignant lesion (PML) or malignancy. Using the keywords "carcinoma" AND "dental implants," a search was conducted in the MEDLINE (PubMed), National Center for Biotechnology Information, and Google Scholar databases for case reports and case series in which OSCC was discovered as a primary cancer in the region of dental implants. An initial search identified 260 articles, 247 of which were excluded based on study inclusion or exclusion criteria, leaving 13 articles chosen for inclusion and a total of 30 patients who developed primary oral cancer surrounding osseointegrated titanium-based dental implants. In the studies included in the present review, 22 (73%) of 30 patients with peri-implant cancer had a history of PML or carcinoma. There is no statistical evidence of a direct association between dental implants and OSCC in patients with a history of a PML or malignant lesion. There have been some case reports of OSCC in the region of dental implants in patients with a history of a PML or malignant lesion, but further studies are needed to prove a definitive relationship.

A modified technique of using digital technology to fabricate surgical obturator in patients with limited mouth opening.

This article presents a digital technique for the fabrication of an immediate surgical obturator for a patient with decreased mouth opening planned for maxillectomy. The amalgamation of pre-operative Cone Beam Computed Tomography (CBCT) data and 3D printing allowed for the fabrication of the immediate surgical obturator without conventional pre-surgical diagnostic impression. The surgical obturator was placed in position intraorally post tumor resection to complete the obturation. The procedure followed led to an accurate fit of the prosthesis without any need for relining during surgery.

3D face scan for fabrication of cranioplast: An applied innovative technique.

Cranial defects are repaired for esthetics, functional, morphological and psychological benefit of the affected patients. Purpose of a cranioplast is to prevent trauma to brain tissue, improve the cranial contour, symmetry and esthetics along with pain reduction. This technique describes the innovative use of a multicamera 3D face scanning software for obtaining a 3D face model of a road traffic accident patient for cranioplast fabrication. Advantage of this technique is that it is quick and easy and allows complete face scan under 10 s.

Effectiveness of Vitamin D along with Splint therapy in the Vit D deficient patients with Temporomandibular disorder-A Randomized, double-blind, placebo-controlled clinical trial.

Aim: The purpose of this study is to comparatively evaluate the Vitamin D supplementation and stabilization splint therapy in patients exhibiting temporomandibular disorders (TMD). Settings and Design: The study design was double-blinded, parallel-group, randomized and placebo-controlled trial conducted in patients with low Vitamin D and TMDs, which were allocated to two groups, Study group S + D (Stabilization splint with Vitamin D supplementation) and Control Group S (Stabilization Splint with placebo drug). Subjects and Methods: Thirty-six participants of 18-45 years of age gap with Vitamin D deficiency and TMD were included in the study. Preoperative values of Vitamin D levels in ng/ml, comfort mouth opening (CMO) in mm, maximum mouth opening (MMO) in mm, temporomandibular joint (TMJ) tenderness (grading 0-3), Visual analog scale score (VAS Score 0-10 cm), and total energy (TE) integral values of both left and right TMJ's in Hertz (Hz) were recorded using joint vibration analysis All the values of CMO, MMO, TMJ Tenderness and VAS were recorded at each follow-up at 1st week, 1st month, 2nd month, and 3rd month, respectively. Postoperative Vitamin D levels and TE of both TMJs were recorded at end of 3 months. Statistical Analysis Used: For intergroup comparison, Mann-Whitney U-test and Pearson Chi-square tests were done. For Intragroup comparison, Wilcoxon signed rank test was used for comparison. Results: In Intergroup comparison, a significant difference was seen in CMO, VAS score and MMO (P < 0.05) but not among mean values of TE of right and left TMJ, and Vitamin D levels (P < 0.05). In both groups, there were significant statistical variations in CMO, VAS score, MMO, and TE integral before and after treatment in the right and left TMJs (P < 0.05). Conclusions: The study concludes centric stabilization splint helps in improving symptoms of TMD patients and Vitamin D supplementation provided faster relief in those cases.

Comparative Evaluation of Load-Bearing Capacity and Fracture Analysis of PEEK and Zirconia Three-Unit Fixed Dental Prostheses: An In Vitro Study.

PURPOSE: The purpose of this exploratory in vitro study was to compare and evaluate the load-bearing capacity (LBC) of ceramic-veneered zirconia and composite-veneered polyetheretherketone (PEEK) three-unit fixed dental prostheses (FDPs) with and without thermocycling (TC). MATERIALS AND METHODS: The study included 40 samples of three-unit FDPs replacing mandibular first molars. The four groups included were: ceZIR (feldspathic ceramic-layered zirconia), ceZIR TC (feldspathic ceramic-layered thermocycled zirconia), cPEEK (composite-layered PEEK), and cPEEK TC (composite-layered thermocycled PEEK) (n = 10 per group). All frameworks were CAD/CAM milled. Ten PEEK and 10 zirconia samples were subjected to TC (6,000 cycles). All 40 FDP specimens were loaded by applying static load, using a universal testing machine. The maximum load required to fracture the specimens denoted the LBC. The comparison of LBC between the four groups was done by using two-way ANOVA with Tukey's post-hoc analysis (α = .05). RESULTS: There was no statistically significant difference between LBC of cPEEK and ceZIR (P > .001) without thermal aging. LBC values decreased considerably for thermally aged specimens. Statistically significant differences were observed between LBC of cPEEK TC and ceZIR TC (P < .001), cPEEK TC and cPEEK (P < .001), and ceZIR TC and ceZIR (P = .001). On fracture analysis, cPEEK showed delamination failures whereas ceZIR displayed catastrophic connector fractures. CONCLUSION: This comparative evaluation offers preliminary data highlighting substantial depreciation in the LBC of layered PEEK under simulated intraoral conditions, thus raising a question regarding the clinical longevity of layered PEEK multi-unit restorations. In contrast, feldspathic-layered zirconia can be suitable for use in posterior FDPs.

Stereophotogrammetric Method for Fabrication of Cranioplast Using Digital Facial Scan Technology - A Case Report.

Rationale: Traumatic brain injury is the most common cause of cranial defects. Cranioplasty is the surgical intervention performed to repair cranial defects. The purpose of a cranioplast is to protect the underlying brain tissues, reduce pain, and improve calvarial contour and symmetry. Patient Concerns: This case report describes the management of an ambulatory aided patient who met with a road traffic accident and had undergone decompressive craniectomy. Diagnosis: Noncontrast computed tomography confirmed the frontal cranial defect and was planned for decompressive craniectomy. Treatment Plan: An innovative multi-camera three-dimensional (3D) face-scanning software (Bellus 3D) was used for facial scanning to obtain a 3D face model and fabrication of 3D model using rich presence technology. Outcomes: The wax pattern was then fabricated on a 3D-prototyped model and a customised polymethylmethacrylate cranioplast was fabricated. Take-Away Lessons: his method with the added advantage of rapid prototyping technology resulted in prosthesis with good aesthetics and better fit.

Evaluation of the failure modes and load-bearing capacity of different surface-treated polyether ether ketone copings veneered with lithium di-silicate compared to polyether ether ketone copings veneered with composite: An in vitro study.

Aims: The purpose of this study is to compare and evaluate the failure modes and load-bearing capacity of different surface-treated polyether ether ketone (PEEK) copings when veneered with lithium di-silicate with that of PEEK veneered with composite. Settings and Design: In vitro; comparative study. Materials and Methods: Congruently anatomically shaped single unit PEEK copings (n = 40) were fabricated by scanning a prepared typodont tooth. The PEEK copings were subdivided among four groups (n = 10/group). Among all, one group of PEEK coping was veneered with Urethane dimethacrylate (UDMA)-based composite and other groups were veneered with lithium-di-silicate after different surface treatment on peek copings, i.e., (i) composite veneered PEEK fixed dental prosthesis (FDP) (control group: Group PC), (ii) lithium di-silicate veneered PEEK FDP (no surface treatment: Group PCeN), (iii) lithium di-silicate veneered PEEK FDP (sandblasting with 50 µm alumina: Group PCeS), and (iv) lithium di-silicate veneered PEEK FDP (chemical etching with 98% sulfuric acid: Group PCeE). The load-bearing capacity of all specimens was assessed using a universal test machine. All the samples were loaded till the cracking point and load at that point and failure modes were noted down. Statistical Analysis Used: One-way ANOVA and post hoc Tukey tests. Results: The highest load-bearing capacity was recorded for lithium di-silicate veneered PEEK copings which were chemically etched with 98% sulfuric acid (Group PCeE: 1040.25 ± 77.46) followed by Group PCeS (1017.20 ± 53.70), then Group PC (965 ± 51.57) and least was for Group PCeN (933 ± 97.54). There was a significant reduction in mean load-bearing capacity in Group PCeN (P < 0.05). Conclusions: Veneering of PEEK with pressed lithium di-silicate seems to be a viable clinical option in terms of adequate load-bearing capacity. Lithium di-silicate veneered PEEK FDPs were successful against physiological occlusal forces and are a suitable material for FDPs.

Diversifying the rehabilitation of calvarial defects: Rejuvenating precision: A case series.

Cranial vault defects are either congenital or acquired in origin. Cranioplasty is most commonly done in patients after trauma, decompressive craniectomies, tumor resections, infections or because of congenital malformations. The purpose of a Cranioplast is to protect the underlying brain tissues, reduce pain, and to improve the calvarial contour, symmetry, and esthetics. Rehabilitation of these defects possesses a challenge to the surgical team and prosthodontist. With advancement in three-dimensional (3D) engineering technology, the use of rapid prototyping technology (RPT) can be used in the fabrication of 3D skull eliminating conventional impression for recording defect region. Custom-made cranial prosthesis now can be fabricated using the conventional method of wax-up and lost-wax method. Case 1 had a history of road traffic accident followed by decompressive craniectomy, which led to frontoparietotemporal defect of the right side. The 3D model was fabricated using RPT technology. The wax pattern fabricated on 3D prototyped skull was contoured using digital photographic superimposition method. Case 2 had a history of trauma on the head causing intracerebral hemorrhage followed by decompressive craniectomy which led to frontoparietotemporal defect of the right side. The 3D model was fabricated using RPT. The wax pattern fabricated on 3D prototyped skull was contoured using the compass method. The use of these methods with the added advantage of RPT resulted in prosthesis with good esthetics and better fit. The contour of the prosthesis was replicated in the same manner as compared to the contralateral side. These techniques are easy to use and are less time consuming and had few chances of errors.

Customization of attachments in tooth supported overdentures: Three clinical reports.

In elderly patients with few remaining teeth, overdenture is a good treatment option. Roots beneath the denture protect the alveolar ridge, offer proprioception and improve retention, stability and masticatory efficiency of dentures. Customization of attachments available is a viable alternative for some patients in which prefabricated attachments cannot be placed or in which cost is a factor; to improve the final outcome of the treatment. Due to competitive commercialization, implant treatment has become the norm in current dentistry and the concept of tooth supported overdentures has eclipsed, but with proper case selection, thorough treatment planning and modifications in the denture such as customization of attachments, amalgam stops, cross-linked teeth, and metallic mesh can be applied to prolong the longevity and success of the attachment overdenture prosthesis.

Telescopic overdenture for oral rehabilitation of partially edentulous patient.

A case report describing the rehabilitation of a patient presenting with partially edentulous arches and compromised abutment teeth has been described. The aim of this study was to restore function and esthetics and uplift the psychological status of the patient by fabrication of a fixed removable prosthesis using the existing abutment teeth as telescopic overdenture.

Fabrication of a bicomponent hybrid orbital prosthesis.

This clinical report describes the management of the retention of an orbital prosthesis in a patient with uncontrolled diabetes. The patient, who underwent left orbital exenteration subsequent to severe mucormycosis, posed a challenge for implant placement and for use of adhesives as a method of retention because of the high likelihood of reinfection. Inaccessibility to severe anatomic undercuts along with their arbitrary block out would have caused diminished retention. As a result, an orbital prosthesis composed of a digitally produced hollow conformer and traditionally produced silicone prosthesis was provided using 3-dimensional imaging and rapid prototyping, with optimum retention.

A Novel Approach to Treat Traumatized Alveolar Ridges: Two Case Reports.

Functional forces are transmitted to the basal seat mucosa through a hard denture base during mastication. Such hard base dentures are not comfortably tolerated in patients with fragile oral mucosa and will cause sore spots, masticatory pain, and further resorption of alveolar bone. Soft liners materials can be advocated successfully to manage such clinical situations. The soft liner material absorbs masticatory forces by means of the cushioning effect and distributes occlusal forces uniformly to prevent trauma to compromised residual ridges.

Comparative evaluation of bonding strength of computer aided machined ceramic, pressable ceramic, and milled metal implant abutment copings and effect of surface conditioning on bonding strength: An in vitro study.

BACKGROUND/PURPOSE: The aim of this study was to compare the shear bond strength of computer aided design/computer aided machined ceramic (CAD/CAM), pressable ceramic, and milled metal implant copings on abutment and the effect of surface conditioning on bonding strength. MATERIALS AND METHODS: A total of 90 test samples were fabricated on three titanium abutments. Among 90 test samples, 30 copings were fabricated by CAD/CAM, 30 by pressable, and 30 by milling of titanium metal. These 30 test samples in each group were further subdivided equally for surface treatment. Fifteen out of 30 test samples in each group were surface conditioned with airborne particle abrasion. All the 90 test samples were luted on abutment with glass ionomer cement. Bonding strength was evaluated for all the samples using universal testing machine at a crosshead speed of 5 mm/min. The results obtained were compared and evaluated using one-way ANOVA with post-hoc and unpaired t-test at a significance level of 0.05. RESULTS: The mean difference for CAD/CAM surface conditioned subgroup was 1.28 ± 0.12, for nonconditioned subgroup was 1.20 ± 0.11. The mean difference for pressable surface conditioned subgroup was 1.18 ± 0.04, and for nonconditioned subgroup was 0.75 ± 0.28. The mean difference for milled metal surface conditioned subgroup was 2.57 ± 0.58, and for nonconditioned subgroup was 1.49 ± 0.15. CONCLUSIONS: On comparison of bonding strength, milled metal copings had an edge over the other two materials, and surface conditioning increased the bond strength.

Rehabilitation of resorbed mandibular ridges using mini implant retained overdentures: A case series with 3 year follow-up.

With the increasing average life expectancy of human beings, the need to cater geriatric patients is ever increasing. Complete dentures are an indispensable tool in this regard. The loose and unstable lower complete denture owing to residual ridge resorption is one of the most common problems faced by edentulous patients. Dental implant retained overdentures have emerged as an efficient treatment modality for such patients. Though useful, not every patient is a suitable candidate to go for conventional implant-borne prosthesis, limitation being the available bone width. In such cases, mini implants may be used for augmenting the retention of the dentures and improving the quality of life of patients. In this case series, rehabilitation of three compromised cases with mini implant retained overdentures have been described wherein patients are experiencing instability of lower denture due to thin resorbed mandibular ridges. In one of the cases, three mini implants placed in A, C, and E position were splinted using a cemented bar to retain the mandibular denture. The other two cases were rehabilitated using unsplinted ball type one piece mini implants placed in A, C, and E position in one case and B and D position in another case. Though splinted bar design should be preferred but the lack of available vertical space precluded the utilization of bar in other two cases. The results were found to be satisfactory with no complications reported during a follow-up period of over 3 years in all the cases.

Correction of cheek biting in a dentate patient.

Postsurgical injury by teeth to oral mucosa (reconstructed by a flap) can lead to ulceration and subsequent infection at the reconstructed site. A prompt intervention by fabricating a specially designed prosthesis to deflect the reconstruction flap away from the occluding teeth has been described for the treatment of cheek biting in the present clinical report.

Correction of microstomia in an edentulous patient.

The problem of small oral aperture is big. Irrespective of the etiology, this problem may be overcome by adjunctive therapies in the form of prosthesis, surgery, or exercise. A patient is described with this problem, which was overcome by revisiting the 3 adjunctive therapies including a commissural stent designed with the patient's edentulous state in mind.

Mini-Implants, Mega Solutions: A Case Series.

Dental implants have evolved as a standard of care for replacement of missing teeth. Though this treatment modality promises a high level of patient satisfaction and success, it cannot be performed in all cases. Apart from medically compromised patients, implant use is also restricted whenever there is limited available bone volume at the edentulous site. An example includes the mandibular incisor, the maxillary lateral incisor region, and other sites with reduced interdental spacing and atrophic edentulous maxillary and mandibular ridges. Bone volume at some of these sites can be increased by suitable augmentation procedure for placement of a regular diameter implant (3.75 to 4.2 mm). But many a times such procedure cannot be undertaken either due to financial constraint, risk of subjecting the patient to additional surgical procedure, added time factor, or guarded prognosis of the grafted site. In such cases, mini-implants can be used. In this case series, mini-implants (2.5 to 3 mm) were used to replace teeth in all mouth quadrants and to retain a mandibular overdenture in a compromised case. The implants served well at all the sites with minimal bone loss and a high level of patient satisfaction. Mini-implants hold the potential to serve as an alternate to regular diameter implants in certain situations. Preferably they should be used in multiples to retain fixed dental prostheses and might serve as an efficient, low-cost solution for retaining overdentures in selected cases.

Telescopic overdenture for oral rehabilitation of ectodermal dysplasia patient.

Reduced number of teeth with underdeveloped alveolar ridges poses a greatest prosthetic challenge in rehabilitation of ectodermal dysplasia patients (ED). Furthermore, surgical risks and financial constraints may preclude the implant supported prosthesis, the most desirable treatment option in an adult ED patient. Long edentulous span does not permit fixed dental prosthesis (FDP) as well. Telescopic denture by incorporating the best of both fixed and removable prosthesis can be a viable treatment alternative for ED patients with compromised dentition and limited finances. A 21-year-old young girl presented with chief complaint of esthetics and mastication due to missing upper and lower teeth. A provisional diagnosis of ED was made based on familial history, physical, and oral examination. This clinical report describes management of an adult ED patient by means of telescopic overdenture prosthesis in mandibular arch and FDP in maxillary arch which restored esthetics, function, and social confidence of the patient in a cost effective manner.