Composition-dependent morphologies of CeO2 nanoparticles in the presence of Co-adsorbed H2O and CO2: a density functional theory study.

Catalytic activity is affected by surface morphology, and specific surfaces display greater activity than others. A key challenge is to define synthetic strategies to enhance the expression of more active surfaces and to maintain their stability during the lifespan of the catalyst. In this work, we outline an ab initio approach, based on density functional theory, to predict surface composition and particle morphology as a function of environmental conditions, and we apply this to CeO2 nanoparticles in the presence of co-adsorbed H2O and CO2 as an industrially relevant test case. We find that dissociative adsorption of both molecules is generally the most favourable, and that the presence of H2O can stabilise co-adsorbed CO2. We show that changes in adsorption strength with temperature and adsorbate partial pressure lead to significant changes in surface stability, and in particular that co-adsorption of H2O and CO2 stabilizes the {100} and {110} surfaces over the {111} surface. Based on the changes in surface free energy induced by the adsorbed species, we predict that cuboidal nanoparticles are favoured in the presence of co-adsorbed H2O and CO2, suggesting that cuboidal particles should experience a lower thermodynamic driving force to reconstruct and thus be more stable as catalysts for processes involving these species.

Infrared and Raman Diagnostic Modeling of Phosphate Adsorption on Ceria Nanoparticles.

Cerium dioxide (CeO2; ceria) nanoparticles (CeNPs) are promising nanozymes that show a variety of biological activity. Effective nanozymes need to retain their activity in the face of surface speciation in biological environments, and characterizing surface speciation is therefore critical to understanding and controlling the therapeutic capabilities of CeNPs. In particular, adsorbed phosphates can impact the enzymatic activity exploited to convert phosphate prodrugs into therapeutics in vivo and also define the early stages of the phosphate-scavenging processes that lead to the transformation of active CeO2 into inactive CePO4. In this work, we utilize ab initio lattice-dynamics calculations to study the interaction of phosphates with the three major surfaces of ceria and to predict the infrared (IR) and Raman spectral signatures of adsorbed phosphate species. We find that phosphates adsorb strongly to CeO2 surfaces in a range of stable binding configurations, of which 5-fold coordinated P species in a trigonal bipyramidal coordination may represent a stable intermediate in the early stages of phosphate scavenging. We find that the phosphate species show characteristic spectral fingerprints between 500 and 1500 cm-1, whereas the bare CeO2 surfaces show no active modes above 600 cm-1, and the 5-fold coordinated P species in particular show potential diagnostic P-O stretching modes between 650 and 700 cm-1 in both IR and Raman spectra. This comprehensive exploration of different binding modes for phosphates on CeO2 and the set of reference spectra provides an important step toward the experimental characterization of phosphate speciation and, ultimately, control of its impact on the performance of ceria nanozymes.

Location of Artinite (Mg2CO3(OH)2·3H2O) within the MgO-CO2-H2O system using ab initio thermodynamics.

The MgO-CO2-H2O system have a variety of important industrial applications including in catalysis, immobilisation of radionuclides and heavy metals, construction, and mineralisation and permanent storage of anthropogenic CO2. Here, we develop a computational approach to generate phase stability plots for the MgO-CO2-H2O system that do not rely on traditional experimental corrections for the solid phases. We compare the predictions made by several dispersion-corrected density-functional theory schemes, and we include the temperature-dependent Gibbs free energy through the quasi-harmonic approximation. We locate the Artinite phase (Mg2CO3(OH)2·3H2O) within the MgO-CO2-H2O phase stability plot, and we demonstrate that this widely-overlooked hydrated and carbonated phase is metastable and can be stabilised by inhibiting the formation of fully-carbonated stable phases. Similar considerations may apply more broadly to other lesser known phases. These findings provide new insight to explain conflicting results from experimental studies, and demonstrate how this phase can potentially be stabilised by optimising the synthesis conditions.

A Review of Key Properties of Thermoelectric Composites of Polymers and Inorganic Materials.

This review focusses on the development of thermoelectric composites made of oxide or conventional inorganic materials, and polymers, with specific emphasis on those containing oxides. Discussion of the current state-of-the-art thermoelectric materials, including the individual constituent materials, i.e., conventional materials, oxides and polymers, is firstly presented to provide the reader with a comparison of the top-performing thermoelectric materials. Then, individual materials used in the inorganic/polymer composites are discussed to provide a comparison of the performance of the composites themselves. Finally, the addition of carbon-based compounds is discussed as a route to improving the thermoelectric performance. For each topic discussed, key thermoelectric properties are tabulated and comparative figures are presented for a wide array of materials.

Unraveling the Impact of Graphene Addition to Thermoelectric SrTiO3 and La-Doped SrTiO3 Materials: A Density Functional Theory Study.

We present a detailed theoretical investigation of the interaction of graphene with the SrO-terminated (001) surface of pristine and La-doped SrTiO3. The adsorption of graphene is thermodynamically favorable with interfacial adsorption energies of -0.08 and -0.32 J/m2 to pristine SrTiO3 and La-doped SrTiO3 surfaces, respectively. We find that graphene introduces C 2p states at the Fermi level, rendering the composite semimetallic, and thus the electrical properties are predicted to be highly sensitive to the amount and quality of the graphene. An investigation of the lattice dynamics predicts that graphene adsorption may lead to a 60-90% reduction in the thermal conductivity due to a reduction in the phonon group velocities, accounting for the reduced thermal conductivity of the composite materials observed experimentally. This effect is enhanced by La doping. We also find evidence that both La dopant ions and adsorbed graphene introduce low-frequency modes that may scatter heat-carrying acoustic phonons, and that, if present, these effects likely arise from stronger phonon-phonon interactions.

Variable-focus microscopy and UV surface dissolution imaging as complementary techniques in intrinsic dissolution rate determination.

This work reports a novel approach to the assessment of the surface properties of compacts used in Surface Dissolution Imaging (SDI). SDI is useful for determining intrinsic dissolution rate (IDR), an important parameter in early stage drug development. Surface topography, post-compaction and post-SDI run, have been measured using a non-contact, optical, three-dimensional microscope based on focus variation, the Alicona Infinite Focus Microscope, with the aim of correlating the IDRs to the surface properties. Ibuprofen (IBU) was used as a model poorly-soluble drug. DSC and XRD were used to monitor possible polymorphic changes that may have occurred post-compaction and post-SDI run. IBUs IDR decreased from 0.033mg/min/cm2 to 0.022mg/min/cm2 from 10 to 20min, respectively, during the experiment. XRD and DSC showed no form changes during the SDI run. The surface topography images showed that a distinct imprint was embossed on the surfaces of some compacts which could affect IDRs. Surface parameter values were associated with the SDI experiments which showed strong correlations with the IDR values. The variable-focus microscope can be used as a complimentary tool in the determination of IDR values from the SDI.

Biodegradation of the alkaline cellulose degradation products generated during radioactive waste disposal.

The anoxic, alkaline hydrolysis of cellulosic materials generates a range of cellulose degradation products (CDP) including α and ß forms of isosaccharinic acid (ISA) and is expected to occur in radioactive waste disposal sites receiving intermediate level radioactive wastes. The generation of ISA's is of particular relevance to the disposal of these wastes since they are able to form complexes with radioelements such as Pu enhancing their migration. This study demonstrates that microbial communities present in near-surface anoxic sediments are able to degrade CDP including both forms of ISA via iron reduction, sulphate reduction and methanogenesis, without any prior exposure to these substrates. No significant difference (n = 6, p = 0.118) in α and ß ISA degradation rates were seen under either iron reducing, sulphate reducing or methanogenic conditions, giving an overall mean degradation rate of 4.7 × 10(-2) hr(-1) (SE ± 2.9 × 10(-3)). These results suggest that a radioactive waste disposal site is likely to be colonised by organisms able to degrade CDP and associated ISA's during the construction and operational phase of the facility.

Enhanced photocatalytic hydrogen generation using polymorphic macroporous TaON.

Macroporous TaON (mac-TaON) is prepared using polymer sphere templating and controlled ammonolysis. In contrast to typical powder synthesis, which gives the ß polymorph, mac-TaON is a mixture of ß and γ polymorphs. mac-TaON shows twice the activity for photocatalytic hydrogen generation in comparison to mac-TaON when normalised for surface area.

Isomeric pyridyl-thiazole donor units for metal ion recognition in bi- and tri-metallic helicates.

Linking two isomeric tridentate N-chelates together produces a hetero-ditopic ligand capable of selectively binding Hg2+ and Zn2+ ions in a double-stranded helicate.

Plasma-promoted dielectric heating in the microwave synthesis of spinels.

Comparison between the rates of synthesis of the spinel phases (MAl2O4, M = Mg, Zn, Ni; and MFe2O4, M = Mg, Zn, Mn) using an O2 microwave-induced plasma (MIP) and conventional (tube furnace) methods indicate that a MIP promotes microwave dielectric heating at elevated temperatures.