The biogas upgrading from landfill leachate pretreated with low-frequency ultrasonic: anaerobic digestion performances and energy balance.

The efficient biogas production from landfill leachate (LL) is one of hot topics in anaerobic digestion systems. Higher bioavailability of LL can be achieved by application a feasible and promising pretreatment technologies in order to utilize as a substrate for anaerobic reactors. Here, the enhanced bioavailabity of LL using the low-frequency ultrasonic process and energy balance in anaerobic digestion process was estimated within incubation period of 24 days. The optimal performance of low-frequency ultrasonic for LL biodegradability index: sCOD and TVFA were estimated under influencing parameters: ultrasonic density (UD) (0.02-0.14 W/mL) and Ultrasonic time (UT) (0-12 min). Moreover, the effects of low-frequency ultrasonic pretreatment process on biogas production in batch mode anaerobic reactors operated at 37 ± 1 °C were surveyed for daily and cumulative methane production, operational performance and energy balance. An increased sCOD (820 mg/L) and TVFA (659 mg/L) were observed under optimum codition: UD (0.1 W/mL) and UT (10 min). The highest methane production (430 mL) was found in reactor 4, where %15 volume ratio of LL pretreated with low frequency ultrasonic were feed in. Energy balance assessment indicated that output energy for anaerobic reactors assissted with ultrasonic in range of + 6.99 and + 7.98 kJ/g VS removed. Therefore, incorporation the low-frequency ultrasonic and digestion process revealed a promising and economic technique to improve biomethane potential and energy balance from LL.

A comprehensive assessment to offer optimized remediation method for mercury contamination in Musa Bay by using hybrid Fuzzy AHP-VIKOR approach.

Musa Bay, the largest wetland in Iran and one of the most important Hg-polluted media, plays a significant role in the ecosystem of the area and supports many forms of life. Mercury pollution has detrimental effects on the human body and at high levels leads to the loss of microorganisms in marine ecosystems. Hence, a comprehensive assessment for selecting an effective and sustainable remediation method is crucial to restoring the ecosystem promptly. The determination of a proper and practical treatment method not only is a case-based approach, but could be challenging due to its multi-criteria decision-making nature. Considering preferred crucial factors involved in the effectiveness of remedial actions, in this study a questionnaire is designed to assess the opinion of environmental experts, stakeholders, and some occupants of the area on remedial actions based on the importance weights of criteria. Subsequently, practical remediation and management strategies ranked by hybrid FVIKOR as a multi-criteria decision making (MCDM) method. Ranking results show that dredging and stabilization could offer a promising solution for the remediation of the case study. The results of the study demonstrate that the development of MCDM methods along with effective criteria and considering the analysis of the questionnaires, could offer the best remediation strategy for a specific contaminated site.

Applicability of an anionic-nonionic surfactant in p-cresol contaminated soil washing: Finding the optimal mixing ratio.

In this study, the parameters influencing p-cresol removal efficiency in soil washing method were investigated. Primarily, extraction efficiencies of three Tween series surfactants (Tween 20, Tween 60, Tween 80) with 10 mM concentration were compared. Tween 80 showed the best results since its value (55%) was 4% and 13% higher than that of Tween 60 and Tween 20. The impact of mixed surfactant on extraction rate was examined by employing a mixture of Tween 80 and one anionic surfactant (sodium dodecyl sulfate) with different molar ratio as the main washing solution. The results denoted that the molar ratio of 3:2 (SDS:Tween80) could enhance the extraction rate up to 38% compared to using SDS and Tween 80 alone. Regarding the initial p-cresol concentration in the collected sample, the cleanup level (390 mg/kg) could only be achieved using the mixed-surfactant. Thus, the minimum required surfactant concentrations to hit the target level was calculated to be 3.54 g/L of Tween 80 and 2.105 g/L of SDS (molar ratio of 0.27 SDS:Tween80). Studying the role of surfactant concentration indicated that its increment from 10 mM to 20 mM, which is way above all the reagents' critical micelle concentration (CMC), does not affect the removal rate considerably. The same results were obtained comparing the effect of washing time in three different levels (30 min, 60 min and 90 min). However, temperature showed to be a more significant parameter as it could enhance the results up to 20% (for SDS).

Treatment technologies for PAH-contaminated sites: a critical review.

To reduce environmental and human health risks of contaminated sites, having a comprehensive knowledge about the polycyclic aromatic hydrocarbon (PAH) removal processes is crucial. PAHs are contaminants which are highly recognized to pose threats to humans, animals, and plants. PAHs are hydrophobic and own two or more benzene rings, and hence are resistant to structural degradation. There are various techniques which have been developed to treat PAH-contaminated soil. Four distinct processes to remove PAHs in the contaminated soil, thought to be more effective techniques, are presented in this review: soil washing, chemical oxidation, electrokinetic, phytoremediation. In a surfactant-aided washing process, a removal rate of 90% was reported. Compost-amended phytoremediation treatment presented 58-99% removal of pyrene from the soil in 90 days. Chemical oxidation method was able to reach complete conversion for some PAHs. In electrokinetic treatment, researchers have achieved reliable results in removal of some specific PAHs. Researchers' innovations in novel studies and advantages/disadvantages of the techniques are also investigated throughout the paper. Finally, it should be noted that an exclusive method or a combination of methods by themselves are not the key to be employed for remediation of every contaminated site but the field characteristics are also essential in selection of the most appropriate decontamination technique(s). The remedy for selection criteria is based on PAH concentrations, site characteristics, costs, shortcomings, and advantages.

The effects of co-substrate and thermal pretreatment on anaerobic digestion performance.

The influence of anaerobic co-digestion of leachate and sludge with organic fraction of municipal solid waste (OFMSW) under mesophilic condition in three batch digesters of 5 L capacity has been studied. OFMSW was mixed with leachate and sludge at three different ratios. Experimental results illustrated that the digester with a ratio of 2000/2500 (leachate (mL) or sludge/OFMSW (mL)) had significantly higher performance. Furthermore, this study compared the performance of anaerobic digestion of different substrates with three different mixing ratios with and without thermal pretreatment at low temperature (65°C) in terms of biogas production, chemical oxygen demand (COD) elimination as well as hydraulic retention time. In addition, to predict the biogas yield and evaluate the kinetic parameters, the modified Gompertz model was applied. Based on the results, the maximum biogas yield from adding different leachate and sludge ratios to OFMSW was recorded to be 0.45 and 0.38 m3 kg-1 COD which was higher about 7% in comparison with co-digestion original OFMSW without thermal pretreatment. In addition, thermal pretreatment accelerated the hydrolysis step. Moreover, the total COD elimination was relatively stable in the range of 52-60% at all types of substrate mixtures. Also, the modified Gompertz model demonstrated a good fit to the experimental results. ABBREVIATIONS: AD: anaerobic digester; BOD: biochemical oxygen demand; COD: chemical oxygen demand; FAAS: flame atomic absorption spectroscopy; HS: high solids; HRT: hydraulic retention time; LS: low solids; MS: medium solids; OFMSW: organic fraction of municipal solid waste; TCD: thermal conductivity detector; TS: total solid; TSS: total suspended solids.

Soil washing of chromium- and cadmium-contaminated sludge using acids and ethylenediaminetetra acetic acid chelating agent.

In this research, the effect of soil washing in the removal of chromium- and cadmium-contaminated sludge samples collected from Pond 2 of the Tehran Oil Refinery was investigated. These metals are considered as hazardous substances for human health and the environment. The carcinogenicity of chromate dust has been established for a long time. Cadmium is also a potential environmental toxicant. This study was carried out by collecting sludge samples from different locations in Pond 2. Soil washing was conducted to treat the samples. Chemical agents, such as acetic acid, ethylenediaminetetra acetic acid (EDTA) and hydrochloric acid, were used as washing solutions to remove chromium and cadmium from sludge samples. The results of this study indicated that the highest removal efficiencies from the sludge samples were achieved using a 0.3 M HCl solution with 82.69% and 74.47% for chromium and cadmium, respectively. EDTA (0.1 M) in the best condition extracted 66.81% of cadmium and 72.52% of chromium from the sludges. The lowest efficiency values for the samples, however, were achieved using 3 M acetic acid with 41.7% and 46.96% removals for cadmium and chromium, respectively. The analysis of washed sludge indicated that the heavy metals removal decreased in the order of 3 M acetic acid < 0.1 M EDTA<0.3 M HCl, thus hydrochloric acid appears to offer a greater potential as a washing agent in remediating the sludge samples.

Soil flushing of cresols contaminated soil: application of nonionic and ionic surfactants under different pH and concentrations.

In this study, the viability of soil flushing on the removal of cresols (meta-, ortho-, and para-cresols) from contaminated soil has been investigated. High production and distribution of cresols in the environment indicate their potential for a widespread exposure to humans. The presence of these compounds in soil could cause a significant threat to environment, as they are toxic and refractory in nature. Cresols are persistent chemicals which are classified by the United State Environmental Protection Agency (U.S.EPA) as Group C, possible human carcinogens. Soil flushing is one of the soil remediation technologies which could by applied for treatment of hydrocarbon contaminated soil. Flushing of the contaminated soil samples was carried out by using sodium dodecyl sulfate (SDS) and Triton X-100 surfactant solutions at the concentrations of 0.1%, 0.2%, 0.3%, and 0.4% (W/W). Three acidic, neutral, and alkaline environments were utilized by adjusting pH of the washing solutions at 3, 7 and 12 to evaluate the effect of washing environment in removing cresols. The results of this research denote that the highest removal efficiencies of 79.6% and 83.51% were achieved for m-cresol and total o- and p-cresols, respectively, under the alkaline environment of pH12 at 0.4% (W/W) SDS concentration. Regarding performance of Triton X-100, the removal efficiencies of 80.26% and 80.14% for the above cresols were attained under similar conditions. Hence, illustrating the effectiveness of surfactants in soil flushing remediation of cresols contaminated soil.

Assessment of soil screening levels due to ingestion and dermal absorption of chrysene and benzo[k]fluoranthene and appropriate remediation method for Dorson Abad.

For years, the Dorson Abad region has been extremely polluted by Tehran Oil Refinery due to leaking from its underground pipelines, storage tanks, and evaporation ponds. To assess the concentrations of hazardous polycyclic aromatic hydrocarbon (PAH) compounds, soil samples were collected from the grounds at and adjacent to a polluted stream located in the study area. The samples were then analyzed, and the results revealed that 12 of the 16 USEPA PAHs were noticeably present in the soil, which, among them, benzo[k]fluoranthene and chrysene had the highest concentrations with averages of 357.17 and 173.38 mg/kg, respectively. A comparison of the obtained concentrations with the soil screening levels indicated that both benzo[k]fluoranthene and chrysene concentrations were substantially higher than EPA screening level values, signifying the necessity of soil remediation for these contaminants in the area. Techniques such as soil washing/flushing, high temperature thermal desorption, and solidification/stabilization were investigated for treatment of the contaminated soil; solidification/stabilization is recommended as an applicable and cost-effective remediation method for Dorson Abad due to the size of the region, relatively low cost of the binder (cement), and low volatility of benzo[k]fluoranthene and chrysene.

Characterization of oily sludge from a Tehran oil refinery.

In this study, oily sludge samples generated from a Tehran oil refinery (Pond I) were evaluated for their contamination levels and to propose an adequate remediation technique for the wastes. A simple, random, sampling method was used to collect the samples. The samples were analyzed to measure Total petroleum hydrocarbon (TPH), polyaromatic hydrocarbon (PAH) and heavy metal concentrations in the sludge. Statistical analysis showed that seven samples were adequate to assess the sludge with respect to TPH analyses. The mean concentration of TPHs in the samples was 265,600 mg kg⁻¹. A composite sample prepared from a mix of the seven samples was used to determine the sludge's additional characteristics. Composite sample analysis showed that there were no detectable amounts of PAHs in the sludge. In addition, mean concentrations of the selected heavy metals Ni, Pb, Cd and Zn were 2700, 850, 100, 6100 mg kg⁻¹, respectively. To assess the sludge contamination level, the results from the analysis above were compared with soil clean-up levels. Due to a lack of national standards for soil clean-up levels in Iran, sludge pollutant concentrations were compared with standards set in developed countries. According to these standards, the sludge was highly polluted with petroleum hydrocarbons. The results indicated that incineration, biological treatment and solidification/stabilization treatments would be the most appropriate methods for treatment of the sludges. In the case of solidification/stabilization, due to the high organic content of the sludge, it is recommended to use organophilic clays prior to treatment of the wastes.