Accuracy of digital workflow for placing orthodontic miniscrews using generic and licensed open systems. A 3d imaging analysis of non-native .stl files for guided protocols.

BACKGROUND: This study aimed to assess the accuracy of digital workflow for guided insertion of miniscrews in the anterior palate using restorative implant dentistry software and licensed software for orthodontic applications. METHODS: Twenty subjects (8 males, 12 females, mean age = 16.7 ± 2.1 years) were prospectively selected to receive guided insertion of bicortical palatal miniscrews. Virtual planning was performed using restorative implant dentistry software (Blue Sky Plan*, version 4.7) (group 1 = 10 subjects) and licensed orthodontic software (Dolphin Imaging Software, version 11.0) (group 2 = 10 subjects). A specific 3D Imaging technology was applied to permit the registration of the planned and achieved position of the miniscrews based on the superimposition of maxillary models. The angular deviation (accuracy error) between the planned and the achieved positions of the miniscrews were recorded. Independent Student's test was used with statistical significance set at p value < 0.05. RESULTS: The mean accuracy error recorded in group 1 was 7.15° ± 1.09 (right side) and 6.19 ± 0.80 (left side) while the mean error in group 2 was 6.74° ± 1.23 (right side) and 5.79 ± 0.95 (left side). No significant differences were recorded between the two groups (p > 0.05); instead, miniscrews placed on the right side were almost one degree higher than the left side (p < 0.05) in both groups. CONCLUSIONS: The clinical accuracy error was similar when using generic and licensed orthodontic software for guided systems.

A Full Computerized Workflow for Planning Surgically Assisted Rapid Palatal Expansion and Orthognathic Surgery in a Skeletal Class III Patient.

In the present case report, we present and discuss the digital workflow involved in the orthodontic/orthognathic combined treatment of a skeletal malocclusion correction in a 17-year-old male patient affected by a skeletal class III, facial asymmetry, sagittal and transversal deficiency of the medium third of the skull, dental crowding, and bilateral cross-bite. The first stage of the treatment involved surgically assisted rapid palatal expansion and occlusal decompensation, using fixed self-ligating appliance. An orthodontic software package (i.e., Dolphin 3D Surgery module) was used to perform virtual treatment objective evaluation by integrating data from cone beam computer tomography acquisition, intraoral scan, and extraoral photographs. The software allowed a comprehensive evaluation of skeletal, dento-alveolar, and soft-tissue disharmonies, qualitative and quantitative simulation of surgical procedure according to skeletal and aesthetic objectives, and, consequently, the treatment of the malocclusion. Using a specific function of the software, the surgical splint was designed according to the pre-programmed skeletal movements, and subsequently, the physical splint was generated with a three-dimensional (3D) printing technology. Once a proper occlusal decompensation was reached, a Le Fort I osteotomy of the maxilla and a bilateral sagittal surgical osteotomy of the mandible were executed to restore proper skeletal relations. The whole treatment time was 8 months. The orthodontic/orthognathic combined treatment allowed to correct the skeletal and the dental imbalance, as well as the improvement of facial aesthetics. Accordingly, the treatment objectives planned in the virtual environment were achieved. Virtual planning offers new possibilities for visualizing the relationship between dental arches and surrounding bone and soft structures in a single virtual 3D model, allowing the specialists to simulate different surgical and orthodontic procedures to achieve the best possible result for the patient and providing an accurate and predictable outcome in the treatment of challenging malocclusions.

The New Era of Salivaomics in Dentistry: Frontiers and Facts in the Early Diagnosis and Prevention of Oral Diseases and Cancer.

Nowadays, with the development of new and highly sensitive, blood is not the only medium of choice for the diagnosis of several diseases and pathological conditions. Saliva is now considered a safe and non-invasive sample to study oral and systemic diseases, showing great diagnostic potential. According to several recent studies, saliva has emerged as an emerging biofluid for the early diagnosis of several diseases, indicated as a mirror of oral and systemic health and a valuable source of clinically relevant information. Indeed, several studies have observed that saliva is useful for detecting and diagnosing malignant tumours, human immunodeficiency virus, heart disease, and autoimmune diseases. The growing realisation that saliva is an inexhaustible source of information has led to the coining of the term 'Salivaomics', which includes five "omics" in connection with the main constituents of saliva: genome and epigenome, transcriptomics, metabolomics, lipidomics, proteomics and microbiota. All those may be changed by disease state, so they offer significant advantages in the early diagnosis and prognosis of oral diseases. The aim of the present review isto update and highlight the new frontiers of salivaomics in diagnosing and managing oral disorders, such as periodontitis, premalignant disorders, and oral squamous cell carcinoma (OSCC).

Class III Orthodontic Camouflage: Is the "Ideal" Treatment Always the Best Option? A Documented Case Report.

Angle's Class III is one of the most complex malocclusions to treat. In nongrowing skeletal class III malocclusions, the choice between orthognathic surgery and camouflage treatment remains a challenge to the orthodontist. In class III borderline cases, clinicians are called to find the best compromise between functional and aesthetics outcomes, with the latter which often turns in avoiding worsening of profile characteristics, which makes the treatment of these patients quite challenging. This case report describes a borderline nongrowing patient with skeletal class III malocclusion, upper incisor proclination and spacing, lower crowding, and arch width discrepancy, which has already undergone previous orthodontic treatment. The orthodontic treatment involved the mandibular first premolar extraction, resulting in class I canine relation with good overjet and overbite as well as good arch coordination. The orthodontic camouflage improved the dental relationship with normalization of upper incisor inclination without a relevant retroclination of lower incisors; the skeletal facial pattern of the patient experienced a slight improvement. The tendency to skeletal class III has remained nearly unaffected. Treatment outcomes were stable after 1-year posttreatment follow-up.

Complications reported with the use of orthodontic miniscrews: A systematic review.

OBJECTIVE: The aim of this systematic review was to evaluate the complications and side effects associated with the clinical use of orthodontic miniscrews by systematically reviewing the best available evidence. METHODS: A survey of articles published up to March 2020 investigating the complications associated with miniscrew insertion, in both the maxilla and mandible, was performed using 7 electronic databases. Clinical studies, case reports, and case series reporting complications associated with the use of orthodontic miniscrew implants were included. Two authors independently performed study selection, data extraction, and risk-of-bias assessment. RESULTS: The database survey yielded 24 articles. The risk-of-bias assessment revealed low methodological quality for the included studies. The most frequent adverse event reported was root injury with an associated periradicular lesion, vitality loss, pink discoloration of the tooth, and transitory loss of pulp sensitivity. Chronic inflammation of the soft tissue surrounding the miniscrew with mucosal overgrowth was also reported. The other adverse events reported were lesion of the buccal mucosa at the insertion site, soft-tissue necrosis, and perforation of the floor of the nasal cavity and maxillary sinus. Adverse events were also reported after miniscrew removal and included secondary bleeding, miniscrew fracture, scars, and exostosis. CONCLUSIONS: These findings highlight the need for clinicians to preliminarily assess generic and specific insertion site complications and side effects.

Evaluation of mandibular changes after rapid maxillary expansion: a CBCT study in youngsters with unilateral posterior crossbite using a surface-to-surface matching technique.

OBJECTIVES: The purpose of this study was to evaluate mandibular asymmetry in youngsters with posterior unilateral crossbite (PUXB), through cone-beam computed tomography and reverse engineering technique, before and after rapid maxillary expansion (RME) treatment. MATERIALS AND METHODS: Forty cone-beam computed tomography (CBCT) images were obtained from all patients at two time points, namely T0 acquired before the placement of a Hyrax expander and T1 after appliance removal. The CBCT scans were segmented and volume rendered into a surface there-dimensional (3D) mesh model. Thereafter, mandibular models were digitally registered by using a "best-fit" algorithm. Surface and volumetric changes, between T0 and T1, were compared by using Student's t tests. RESULTS: A slight increase of 0.45 cm3 of the total mandibular volume was found at T1 when compared with T0 (p < 0.001). The mandibular hemi-volume on the crossbite side (CB) was slightly smaller than the non-crossbite side both at T0 and T1. However, the mean differences of hemi-volume from the CB (crossbite) and non-CB side between T0 and T1 show a decrease of 0.26 cm3 (p < 0.001). Findings for the surface-to-surface deviation analysis demonstrated a fine percentage of matching at T0 which slightly improved at T1 (p < 0.001). CONCLUSIONS: Youngsters affected by PUXB showed a very slight and not statistically significant volumetric and morphological asymmetry between CB side and non-CB side at T0. However, the change in mean differences of 0.26 cm cannot be considered clinically relevant. CLINICAL RELEVANCE: Mandibles in young PUXB patients exhibit only a very mild mandibular asymmetry. Although the statistically significant mean change found right after RME removal cannot be considered clinically relevant, a more consistent sample and a longer follow-up could be of interest in explaining the short-term findings.

Short-term treatment effects produced by rapid maxillary expansion evaluated with computed tomography: A systematic review with meta-analysis.

OBJECTIVE: To identify the available evidence on the effects of rapid maxillary expansion (RME) with three-dimensional imaging and provide meta-analytic data from studies assessing the outcomes using computed tomography. METHODS: Eleven electronic databases were searched, and prospective case series were selected. Two authors screened all titles and abstracts and assessed full texts of the remaining articles. Seventeen case series were included in the quantitative synthesis. Seven outcomes were investigated: nasal cavity width, maxillary basal bone width, alveolar buccal crest width, alveolar palatal crest width, inter-molar crown width, inter-molar root apex width, and buccopalatal molar inclination. The outcomes were investigated at two-time points: postexpansion (2-6 weeks) and post-retention (4-8 months). Mean differences and 95% confidence intervals were used to summarize and combine the data. RESULTS: All the investigated outcomes showed significant differences postexpansion (maxillary basal bone width, +2.46 mm; nasal cavity width, +1.95 mm; alveolar buccal crest width, +3.90 mm; alveolar palatal crest width, +3.09 mm; intermolar crown width, +5.69 mm; inter-molar root apex width, +2.85 mm; and dental tipping, +3.75°) and post-retention (maxillary basal bone width, +2.21 mm; nasal cavity width, +1.55 mm; alveolar buccal crest width, +3.57 mm; alveolar palatal crest width, +3.32 mm; inter-molar crown width, +5.43 mm; inter-molar root apex width, +4.75 mm; and dental tipping, 2.22°) compared to pre-expansion. CONCLUSIONS: After RME, skeletal expansion of the nasomaxillary complex was greater in most caudal structures. Maxillary basal bone showed 10% post-retention relapse. During retention period, uprighting of maxillary molars occurred.

Periodontitis and Tooth Loss Have Negative Systemic Impact on Circulating Progenitor Cell Levels: A Clinical Study.

The aim of the present study was to investigate the association and impact of periodontitis and tooth loss on a subtype of endothelial progenitor cell (EPC) levels (CD133+/KDR+). Furthermore, the objective was to determine if the periodontal status influenced CD133+/KDR+ levels. In all, 88 patients with periodontitis and 79 healthy controls (HCs) were enrolled in the study. Enrolled patients were examined and characterized by clinical and blood sample analysis. Spearman's correlation test was applied in order to assess the interdependence between CD133+/KDR+ levels and all periodontal parameters. In order to estimate a statistically significant trend (p-trend) for ordered CD133++/KDR+ quartiles, the Jonckheere-Terpstra test was applied for all variables. Patients in the periodontitis group presented significantly lower CD133+/KDR+ levels (66.4 (45.5-269.6 cells/µL)) compared to the HC group (76.7 (24.3-313.2 cells/µL), p < 0.001). Lower CD133+/KDR+ levels negatively correlated with C-reactive protein (CRP), with the number of teeth, and with all periodontal parameters (p < 0.001). Moreover, there was a proportional increase in CD133+/KDR+ levels with a progressive increase in number of teeth (p-trend < 0.001), while there was a proportional decrease in CD133+/KDR+ levels with a proportional increase in clinical attachment level (CAL, p-trend = 0.003), probing depth (PD, p-trend = 0.007), and bleeding sites (bleeding on probing (BOP), p-trend < 0.001) as an extent measure of periodontitis. This study demonstrated that patients with periodontitis presented significantly lower CD133+/KDR+ levels compared to HCs. Moreover, all patients presented an increase in the CD133+/KDR+ EPC levels with an extended level of periodontitis and tooth loss.

Pain threshold and temporomandibular function in systemic sclerosis: comparison with psoriatic arthritis.

The aim of the study was to evaluate whether a reduced pain threshold is associated with increased temporomandibular dysfunction in systemic sclerosis (SSc) compared to psoriatic arthritis (PsA) and healthy controls. Ninety subjects participated in the study (30 SSc, 30 PsA, and 30 healthy controls). The Helkimo index was used to evaluate temporomandibular dysfunction. Digital palpation was performed at the temporomandibular joint (TMJ) surface and at the superficial masseter muscle (SMM) and pain intensity was recorded on a visual analog scale (VAS), while pain pressure threshold (PPT) was measured at the same sites through a pressure algometer. PPT scores were lower in SSc patients compared to PsA patients and controls. In addition, the average Helkimo index score, measuring the degree of TMJ dysfunction, was higher in SSc compared to PsA and controls. A significant inverse correlation was observed between every PPT score, and both Helkimo index and VAS palpation in SSc and PsA. Both the range of motion and all the other pain-related subdomains of the Helkimo index score (pain on movement, pain palpation TMJ and pain palpation muscle) were significantly worse in SSc compared to PsA, while no significant differences were observed in the TMJ function subdomain. In SSc patients, the skin score was directly associated with the range of motion subdomain of the Helkimo index. Our results confirm that TMJ function is impaired in SSc; further longitudinal studies are needed to assess the role of pain threshold in the assessment of limitations in TMJ function and to identify an objective marker of therapeutic response.