Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 11 de 11
Filter
1.
Biomed Mater ; 16(3)2021 03 01.
Article in English | MEDLINE | ID: mdl-33186926

ABSTRACT

Generation of artificial vascular grafts as blood vessel substitutes is a primary challenge in biomaterial and tissue-engineering research. Ideally, these grafts should be able to recapitulate physiological and mechanical properties of natural vessels and guide the assembly of an endothelial cell lining to ensure hemo-compatibility. In this paper, we advance on this challenging task by designing and fabricating 3D vessel analogues by two-photon laser lithography using a synthetic photoresist. These scaffolds guarantee human endothelial cell adhesion and proliferation, and proper elastic behavior to withstand the pressure exerted by blood flow.


Subject(s)
Tissue Scaffolds , Vascular Grafting , Biocompatible Materials , Blood Vessel Prosthesis , Humans , Tissue Engineering
2.
Mol Neurobiol ; 55(12): 8788-8798, 2018 Dec.
Article in English | MEDLINE | ID: mdl-29600349

ABSTRACT

Biopolymers are increasingly employed for neuroscience applications as scaffolds to drive and promote neural regrowth, thanks to their ability to mediate the upload and subsequent release of active molecules and drugs. Synthetic degradable polymers are characterized by different responses ranging from tunable distension or shrinkage to total dissolution, depending on the function they are designed for. In this paper we present a biocompatible microfabricated poly-ε-caprolactone (PCL) scaffold for primary neuron growth and maturation that has been optimized for the in vitro controlled release of brain-derived neurotrophic factor (BDNF). We demonstrate that the designed morphology confers to these devices an enhanced drug delivery capability with respect to monolithic unstructured supports. After incubation with BDNF, micropillared PCL devices progressively release the neurotrophin over 21 days in vitro. Moreover, the bioactivity of released BDNF is confirmed using primary neuronal cultures, where it mediates a consistent activation of BDNF signaling cascades, increased synaptic density, and neuronal survival. These results provide the proof-of-principle on the fabrication process of micropatterned PCL devices, which represent a promising therapeutic option to enhance neuronal regeneration after lesion and for neural tissue engineering and prosthetics.


Subject(s)
Biocompatible Materials/chemistry , Brain-Derived Neurotrophic Factor/administration & dosage , Drug Delivery Systems , Nerve Regeneration , Nerve Tissue/physiology , Polymers/chemistry , Tissue Engineering/methods , Tissue Scaffolds/chemistry , Animals , Astrocytes/cytology , Astrocytes/ultrastructure , Biomarkers/metabolism , Cell Adhesion , Cell Survival , Cells, Cultured , Extracellular Signal-Regulated MAP Kinases/metabolism , Mice, Inbred C57BL , Neurons/cytology , Neurons/ultrastructure , Polyesters/chemistry , Signal Transduction , Synapses/metabolism
3.
Nanoscale ; 9(8): 2768-2777, 2017 Feb 23.
Article in English | MEDLINE | ID: mdl-28155926

ABSTRACT

In bio-imaging by electron microscopy, damage of the sample and limited contrast are the two main hurdles for reaching high image quality. We extend a new preparation method based on nanofabrication and super-hydrophobicity to the imaging and structural studies of nucleic acids, nucleic acid-protein complexes (DNA/Rad51 repair protein complex) and neuronal ion channels (gap-junction, K+ and GABAA channels) as paradigms of biological significance and increasing complexity. The preparation method is based on the liquid phase and is compatible with physiological conditions. Only in the very last stage, samples are dried for TEM analysis. Conventional TEM and high-resolution TEM (HRTEM) were used to achieve a resolution of 3.3 and 1.5 Å, respectively. The EM dataset quality allows the determination of relevant structural and metrological information on the DNA structure, DNA-protein interactions and ion channels, allowing the identification of specific macromolecules and their structure.


Subject(s)
DNA/ultrastructure , Ion Channels/ultrastructure , Microscopy, Electron, Transmission , Nucleic Acids/ultrastructure , Animals , Lipid Bilayers , Mice , Mice, Inbred C57BL , Neurons/ultrastructure , Rad51 Recombinase/ultrastructure
4.
Nanotechnology ; 26(28): 285301, 2015 Jul 17.
Article in English | MEDLINE | ID: mdl-26120077

ABSTRACT

In this paper, we report on a method to reduce thin films of graphene oxide (GO) to a spatial resolution better than 100 nm over several tens of micrometers by means of an electrochemical scanning probe based lithography. In situ tip-current measurements show that an edged drop in electrical resistance characterizes the reduced areas, and that the reduction process is, to a good approximation, proportional to the applied bias between the onset voltage and the saturation thresholds. An atomic force microscope (AFM) quantifies the drop of the surface height for the reduced profile due to the loss of oxygen. Complementarily, lateral force microscopy reveals a homogeneous friction coefficient of the reduced regions that is remarkably lower than that of native graphene oxide, confirming a chemical change in the patterned region. Micro Raman spectroscopy, which provides access to insights into the chemical process, allows one to quantify the restoration and de-oxidation of the graphitic network driven by the electrochemical reduction and to determine characteristic length scales. It also confirms the homogeneity of the process over wide areas. The results shown were obtained from accurate analysis of the shift, intensity and width of Raman peaks for the main vibrational bands of GO and reduced graphene oxide (rGO) mapped over large areas. Concerning multilayered GO thin films obtained by drop-casting we have demonstrated an unprecedented lateral resolution in ambient conditions as well as an improved control, characterization and understanding of the reduction process occurring in GO randomly folded multilayers, useful for large-scale processing of graphene-based material.

5.
Nat Nanotechnol ; 8(11): 845-52, 2013 Nov.
Article in English | MEDLINE | ID: mdl-24141538

ABSTRACT

Surface plasmon polaritons are a central concept in nanoplasmonics and have been exploited to develop ultrasensitive chemical detection platforms, as well as imaging and spectroscopic techniques at the nanoscale. Surface plasmons can decay to form highly energetic (or hot) electrons in a process that is usually thought to be parasitic for applications, because it limits the lifetime and propagation length of surface plasmons and therefore has an adverse influence on the functionality of nanoplasmonic devices. Recently, however, it has been shown that hot electrons produced by surface plasmon decay can be harnessed to produce useful work in photodetection, catalysis and solar energy conversion. Nevertheless, the surface-plasmon-to-hot-electron conversion efficiency has been below 1% in all cases. Here we show that adiabatic focusing of surface plasmons on a Schottky diode-terminated tapered tip of nanoscale dimensions allows for a plasmon-to-hot-electron conversion efficiency of ∼30%. We further demonstrate that, with such high efficiency, hot electrons can be used for a new nanoscopy technique based on an atomic force microscopy set-up. We show that this hot-electron nanoscopy preserves the chemical sensitivity of the scanned surface and has a spatial resolution below 50 nm, with margins for improvement.

6.
J Chem Phys ; 137(9): 094504, 2012 Sep 07.
Article in English | MEDLINE | ID: mdl-22957578

ABSTRACT

Brillouin light scattering spectra from transverse and longitudinal acoustic waves in liquid and supercooled 3-methylpentane have been collected from room temperature down to 80 K, just above the glass transition. Spectra at different wave vectors have been obtained using 532 nm and 266 nm excitation. We found evidence of a shear relaxation with a characteristic time of 100 s at the glass transition which only partly accounts for the relaxation observed in the propagation and attenuation of the longitudinal modes. The inclusion of a relaxing bulk viscosity contribution with a relaxation time of the order of 10(2) ns at the glass transition is found to adequately reproduce the experimental data including transient grating data at a much lower frequency. A consistent picture of relaxed shear and bulk moduli as a function of temperature is derived. These two quantities are found to be related by a linear relation suggesting that a Cauchy-like relation holds also above the glass transition.

7.
Minerva Anestesiol ; 78(6): 725-8, 2012 Jun.
Article in English | MEDLINE | ID: mdl-21464813

ABSTRACT

Airway management is a priority for the critically ill patient. The insertion of a cuffed tracheal tube is the best practice to obtain an airway control; however, it is associated with many practical problems in prehospital trauma care. When this common procedure is not available, it can be substituted by an extraglottic airway. We report the case of a 54-year-old victim of a multi-vehicle collision brought to the Emergency Department of a Level One Trauma Center by Emergency Medical Service. Initial evaluation revealed a Glasgow Coma Scale score of 8 and a fixed and midriatic right pupil, suggesting a severe head injury. The patient did not show any predictable sign of difficult intubation. After oxygen administration and cervical spine immobilization a rapid sequence induction was carried out and intubation failed after three attempts. Then a laryngeal tube (LT) was successfully placed and connected with a transport ventilator. The transfer to the hospital took 20 minutes with SpO(2) level of 99% and end tidal carbon dioxide not above 42 mmHg. The patient was properly ventilated by the LT during the computed tomography scan investigations. Due to the impossibility of endotracheal intubation the patient underwent surgical tracheostomy as suggested by the ear nose throat surgeon consultant. This case suggests that LT could be an important alternative device for airway management in trauma patients after a failed tracheal intubation. LT is a precious tool to achieve good ventilation and oxygenation from the field to the operatory theatre.


Subject(s)
Airway Management/instrumentation , Emergency Treatment , Intubation, Intratracheal/instrumentation , Tracheostomy , Emergency Service, Hospital , Female , Humans , Larynx , Middle Aged
8.
J Chem Phys ; 135(3): 034503, 2011 Jul 21.
Article in English | MEDLINE | ID: mdl-21787009

ABSTRACT

The acoustic properties of highly concentrated H(2)SO(4) are investigated performing visible and ultraviolet Brillouin scattering measurements. We analyzed the isotropic and anisotropic spectra of this molecular liquid in a wide temperature and exchanged wavector range in order to study the evolution of its sound velocity and viscosity. This allows us to extract the parameters required to describe its viscoelastic relaxation behavior. We found that the behavior of the hydrodynamic parameters of this molecular liquid shares some similarities with that of water indicating a rather high increase of sound velocity if compared to that measured by ultrasonics.

9.
J Chem Phys ; 120(17): 8089-94, 2004 May 01.
Article in English | MEDLINE | ID: mdl-15267728

ABSTRACT

The high-frequency collective dynamics of molten potassium has been investigated by inelastic x-ray scattering, disclosing an energy/momentum transfer region unreachable by previous inelastic neutron scattering (INS) experiments. We find that a two-step relaxation scenario, similar to that found in other liquid metals, applies to liquid potassium. In particular, we show how the sound velocity determined by INS experiments, exceeding the hydrodynamic value by approximately 30%, is the higher limit of a speedup, located in the momentum region 1 < Q < 3 nm(-1), which marks the departure from the isothermal value. We point out how this phenomenology is the consequence of a microscopic relaxation process that, in turn, can be traced back to the presence of "instantaneous" disorder, rather than to the crossover from a liquid to solidlike response.

10.
Addict Behav ; 18(2): 187-99, 1993.
Article in English | MEDLINE | ID: mdl-8506790

ABSTRACT

Three smoking cessation interventions designed for use by general practitioners (GPs) within the routine consultation were evaluated in a field setting using 26 GPs throughout metropolitan Sydney. A total of 450 smoking patients were allocated to either Structured Behavioral Change with nicotine gum (Group SBCN), Structured Behavioral Change without nicotine gum (Group SBC), or GP advice with nicotine gum (Group AN). Although significant differences in the percentage of abstainers were observed between Groups SBCN and SBC three weeks after treatment (39% vs. 26%), the point prevalence abstinence rate for patients at 12 months declined to 19, 18, and 12% for Groups SBCN, SBC, and AN, respectively. Continuous abstinence to the end of the 12-month period was 9% for Groups SBCN and SBC, and 6% for Group AN. Forty-eight percent of the 450 patients made an attempt to stop smoking, and 89% reduced their cigarette consumption at some point during the study. Examination of 132 self-selecting patients who fully participated in the three interventions and attended all scheduled visits, revealed significantly larger proportions of abstainers within Groups SBCN (34%) and SBC (33%) than in Group AN (15%) at the 12-month follow-up.


Subject(s)
Family Practice , Smoking Cessation , Smoking Prevention , Adolescent , Adult , Aged , Female , Follow-Up Studies , Humans , Male , Middle Aged , Prevalence
SELECTION OF CITATIONS
SEARCH DETAIL
...