ABSTRACT
We demonstrate new, large-mode area (LMA) gain fibers with â¼25 µm mode-field diameter, and increased higher-order mode loss that enable diffraction limited, pulsed fiber lasers operating at high average power with high pulse energy. We achieved 1.6 mJ, ns pulses, with 1.2 kW average power and 370 kW peak power in one of the new Yb-doped gain fibers. In a second, higher absorption fiber, we demonstrate 2 mJ pulse energy with peak power of >420 kW at an average power of 660 W. To the best of our knowledge these are the highest demonstrated energies, powers and peak powers for any nanosecond diffraction-limited, all-fiber laser. The TMI thresholds of two of these fibers were measured to be 1.8 kW and 1 kW respectively.
ABSTRACT
An all-fiber clad pumped Raman fiber laser (FL) oscillator with a CW power of 1.2 kW and an efficiency of 85% is presented. To the best of our knowledge, this laser is the highest power and the highest efficiency Raman FL demonstrated in any configuration with brightness enhancement (BE). To the best of our knowledge, it is also the first greater than kilowatt FL of any kind that does not utilize rare-earth doping in the oscillator fiber (all passive fiber). The beam quality (BQ) of the Raman laser was M2=2.75 at 1 kW, and the pump-Stokes BE factor was approximately 7. The laser consists of a specially designed triple-clad fiber which confines the low BQ pump power into the multi-mode inner clad, while generating the Raman signal in the large-mode-area core. The second Stokes is inhibited by selecting the appropriate inner clad-to-core area ratio and by the oscillator's selective fiber Bragg grating reflectors.
ABSTRACT
We report for the first time, to the best of our knowledge, an all-fiber Raman graded-index (GRIN) fiber laser pumped by a fiber laser. This configuration points to potential future power and brightness increases. Continuous-wave power of 135 W with an M2 value of 2.5 was obtained at a wavelength of 1081 nm with an optical-to-optical efficiency of 68%. A commercial GRIN core fiber acts as the Raman fiber in a power oscillator configuration that includes fiber Bragg gratings (FBGs) written onto the GRIN fiber. The efficiency and brightness demonstrated here are, to the best of our knowledge, the highest reported in any Raman GRIN fiber laser. A brightness enhancement of the pump beam by a factor of 5.6 is attained due to the transverse profiles of Raman gain and FBG reflection in the GRIN fiber.
ABSTRACT
We report a strictly all-fiber clad pumped Raman fiber laser with a CW power of 250 W. To the best of our knowledge, this is the highest power Raman fiber laser demonstrated in any configuration allowing brightness enhancement. In addition, this is the first report of a Raman clad pumped all-fiber laser. The brightness of the pump source was enhanced by a factor of â¼3.8. This result was achieved by the design of a novel triple-clad fiber, with tight pump power inner confining clad that both maximized the Raman gain and inhibited the second Stokes radiation. We discuss power-increase effects on the beam quality, efficiency, and brightness enhancement.
ABSTRACT
We demonstrate a high-power, high-efficiency Raman fiber laser pumped directly by laser diode modules at 978 nm. 154 W of CW power were obtained at a wavelength of 1023 nm with an optical to optical efficiency of 65%. A commercial graded-index (GRIN) core fiber acts as the Raman fiber in a power oscillator configuration, which includes spectral selection to prevent generation of the second Stokes. In addition, brightness enhancement of the pump beam by a factor of 8.4 is attained due to the Raman gain distribution profile in the GRIN fiber. To the best of our knowledge this is the highest power and highest efficiency Raman fiber laser demonstrated in any configuration allowing brightness enhancement (i.e., in either cladding-pumped configuration or with GRIN fibers, excluding step-index core pumped), regardless of pumping scheme (i.e., either diode pumped or fiber laser pumped).
