Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 20 de 21
Filter
Add more filters










Publication year range
1.
Rev Sci Instrum ; 94(10)2023 Oct 01.
Article in English | MEDLINE | ID: mdl-37861404

ABSTRACT

We report a multi-purpose spectrum-on-demand light source (SOLS), conceived primarily but not exclusively for the multiple and advanced characterization of photovoltaic (PV) materials and devices. The apparatus is a spectral shaper illumination device, providing a tunable and spectrally shaped light beam produced by modulating the intensity and/or wavelength range of a primary light source. SOLS stands out from the state of the art because it produces almost any spectrum on demand and delivers two types of output: a spectrally shaped and spatially homogeneous beam over its cross section for areal illumination or a spatially and spectrally split beam into its wavelength components, a unique capability suited to characterize lateral-tandem (Rainbow) solar cells. The tuneability from broadband to narrowband illumination enables two characterization devices into one, namely, a solar simulator for the determination of the power conversion efficiency and an external quantum efficiency measuring system. We expect the SOLS setup to accelerate material screening, enabling the discovery and optimization of novel multi-component materials and devices, in particular for emergent PV technologies like organic, metal halide perovskites, or multi-junction geometries, as well as novel PV applications such as indoors, building integrated, or agrivoltaics, among others.

2.
Sci Rep ; 13(1): 9300, 2023 Jun 08.
Article in English | MEDLINE | ID: mdl-37291135

ABSTRACT

The exceptional optoelectronic properties of metal halide perovskites (MHPs) are presumed to arise, at least in part, from the peculiar interplay between the inorganic metal-halide sublattice and the atomic or molecular cations enclosed in the cage voids. The latter can exhibit a roto-translative dynamics, which is shown here to be at the origin of the structural behavior of MHPs as a function of temperature, pressure and composition. The application of high hydrostatic pressure allows for unraveling the nature of the interaction between both sublattices, characterized by the simultaneous action of hydrogen bonding and steric hindrance. In particular, we find that under the conditions of unleashed cation dynamics, the key factor that determines the structural stability of MHPs is the repulsive steric interaction rather than hydrogen bonding. Taking as example the results from pressure and temperature-dependent photoluminescence and Raman experiments on MAPbBr[Formula: see text] but also considering the pertinent MHP literature, we provide a general picture about the relationship between the crystal structure and the presence or absence of cationic dynamic disorder. The reason for the structural sequences observed in MHPs with increasing temperature, pressure, A-site cation size or decreasing halide ionic radius is found principally in the strengthening of the dynamic steric interaction with the increase of the dynamic disorder. In this way, we have deepened our fundamental understanding of MHPs; knowledge that could be coined to improve performance in future optoelectronic devices based on this promising class of semiconductors.


Subject(s)
Inorganic Chemicals , Metals , Calcium Compounds , Oxides
3.
Adv Mater ; : e2212226, 2023 Mar 21.
Article in English | MEDLINE | ID: mdl-36944218

ABSTRACT

While multi-junction geometries have the potential to boost the efficiency of organic solar cells, the experimental gains yet obtained are still very modest. This work proposes an alternative spectral splitting device concept in which various individual semiconducting junctions with cascading bandgaps are laid side by side, thus the name RAINBOW. Each lateral sub-cell receives a fraction of the spectrum that closely matches the main absorption band of the given semiconductor. Here, simulations are used to identify the important material and device properties of each RAINBOW sub-cell. Using the resulting design rules, three systems are selected, with narrow, medium, and wide effective bandgaps, and their potential as sub-cells in this geometry is experimentally investigated. With the aid of a custom-built setup that generates spectrally spread sunlight on demand, the simulations are experimentally validated, showing that this geometry can lead to a reduction in thermalization losses and an improvement in light harvesting, which results in a relative improvement in efficiency of 46.6% with respect to the best sub-cell. Finally, a working proof-of-concept monolithic device consisting of two sub-cells deposited from solution on the same substrate is fabricated, thus demonstrating the feasibility and the potential of the RAINBOW solar cell concept.

4.
J Phys Chem Lett ; 13(33): 7731-7740, 2022 Aug 25.
Article in English | MEDLINE | ID: mdl-35969174

ABSTRACT

Metal halide perovskites (MHPs) are solution-processed materials with exceptional photoconversion efficiencies that have brought a paradigm shift in photovoltaics. The nature of the peculiar optoelectronic properties underlying such astounding performance is still controversial. The existence of ferroelectricity in MHPs and its alleged impact on photovoltaic activity have fueled an intense debate, in which unanimous consensus is still far from being reached. Here we critically review recent experimental and theoretical results with a two-fold objective: we argue that the occurrence of ferroelectric domains is incompatible with the A-site cation dynamics in MHPs and propose an alternative interpretation of the experiments based on the concept of ferroelasticity. We further underline that ferroic behavior in MHPs would not be relevant at room temperature or higher for the physics of photogenerated charge carriers, since it would be overshadowed by competing effects like polaron formation and ion migration.

5.
Rev Sci Instrum ; 93(3): 034902, 2022 Mar 01.
Article in English | MEDLINE | ID: mdl-35365009

ABSTRACT

We developed a novel contactless frequency-domain thermoreflectance approach to study thermal transport, which is particularly convenient when thermally anisotropic materials are considered. The method is based on a line-shaped heater geometry, produced with a holographic diffractive optical element, instead of using a spot heater as in conventional thermoreflectance. The heater geometry is similar to the one used in the 3-omega method, however, keeping all the technical advantages offered by non-contact methodologies. The present method is especially suitable to determine all the elements of the thermal conductivity tensor, which is experimentally achieved by simply rotating the sample with respect to the line-shaped optical heater. We provide the mathematical solution of the heat equation for the cases of anisotropic substrates, thin films, and multilayer systems. This methodology allows an accurate determination of the thermal conductivity and does not require complex modeling or intensive computational efforts to process the experimental data, i.e., the thermal conductivity is obtained through a simple linear fit ("slope method"), in a similar fashion to the 3-omega method. We demonstrate the potential of this approach by studying isotropic and anisotropic materials in a wide range of thermal conductivities. In particular, we have studied the following inorganic and organic systems: (i) glass, Si, and Ge substrates (isotropic), (ii) ß-Ga2O3 and a Kapton substrate (anisotropic), and (iii) a 285 nm thick SiO2 thin film deposited on a Si substrate. The accuracy in the determination of the thermal conductivity is estimated as ≈5%, whereas the temperature uncertainty is ΔT ≈ 3 mK.

6.
Nano Lett ; 22(2): 768-774, 2022 01 26.
Article in English | MEDLINE | ID: mdl-35078323

ABSTRACT

The fabrication of multifunctional switches is a fundamental step in the development of nanometer-scale molecular spintronic devices. The anchoring of active organic radicals on gold nanoparticles (AuNPs) surface is little studied and the realization of AuNPs-based switches remains extremely challenging. We report the first demonstration of a surface molecular switch based on AuNPs decorated with persistent perchlorotriphenylmethyl (PTM) radicals. The redox properties of PTM are exploited to fabricate electrochemical switches with optical and magnetic responses, showing high stability and reversibility. Electronic interaction between the radicals and the gold surface is investigated by UV-vis, showing a very broad absorption band in the near-infrared (NIR) region, which becomes more intense when PTMs are reduced to anionic phase. By using multiple experimental techniques, we demonstrate that this interaction is likely favored by the preferentially flat orientation of PTM ligands on the metallic NP surface, as confirmed by first-principles simulations.


Subject(s)
Gold , Metal Nanoparticles , Gold/chemistry , Magnetics , Metal Nanoparticles/chemistry , Oxidation-Reduction , Spin Labels
7.
J Phys Chem Lett ; 12(1): 569-575, 2021 Jan 14.
Article in English | MEDLINE | ID: mdl-33382272

ABSTRACT

The complex electron-phonon interaction occurring in bulk lead halide perovskites gives rise to anomalous temperature dependences, like the widening of the electronic band gap as temperature increases. However, possible confinement effects on the electron-phonon coupling in the nanocrystalline version of these materials remain unexplored. Herein, we study the temperature (ranging from 80 K to ambient) and hydrostatic pressure (from atmospheric to 0.6 GPa) dependence of the photoluminescence of ligand-free methylammonium lead triiodide nanocrystals with controlled sizes embedded in a porous silica matrix. This analysis allowed us to disentangle the effects of thermal expansion and electron-phonon interaction. As the crystallite size decreases, the electron-phonon contribution to the gap renormalization gains in importance. We provide a plausible explanation for this observation in terms of quantum confinement effects, showing that neither thermal expansion nor electron-phonon coupling effects may be disregarded when analyzing the temperature dependence of the optoelectronic properties of perovskite lead halide nanocrystals.

8.
Nat Mater ; 19(11): 1138-1139, 2020 11.
Article in English | MEDLINE | ID: mdl-32839588
9.
J Phys Chem Lett ; 10(11): 2971-2977, 2019 Jun 06.
Article in English | MEDLINE | ID: mdl-31091105

ABSTRACT

Lead halide perovskites, which are causing a paradigm shift in photovoltaics, exhibit an atypical temperature dependence of the fundamental gap: it decreases in energy with decreasing temperature. Reports ascribe such a behavior to a strong electron-phonon renormalization of the gap, neglecting contributions from thermal expansion. However, high-pressure experiments performed on the archetypal perovskite MAPbI3 (MA stands for methylammonium) yield a negative pressure coefficient for the gap of the tetragonal room-temperature phase, which speaks against the assumption of negligible thermal expansion effects. Here we show that for MAPbI3 the temperature-induced gap renormalization due to electron-phonon interaction can only account for about 40% of the total energy shift, thus implying thermal expansion to be more if not as important as electron-phonon coupling. Furthermore, this result possesses general validity, holding also for the tetragonal or cubic phase, stable at ambient conditions, of most halide perovskite counterparts.

10.
Energy Environ Sci ; 12(8): 2537-2547, 2019 Aug 07.
Article in English | MEDLINE | ID: mdl-34777574

ABSTRACT

Direct piezoelectric force microscopy (DPFM) is employed to examine whether or not lead halide perovskites exhibit ferroelectricity. Compared to conventional piezoelectric force microscopy, DPFM is a novel technique capable of measuring piezoelectricity directly. This fact is fundamental to be able to examine the existence of ferroelectricity in lead halide perovskites, an issue that has been under debate for several years. DPFM is used to detect the current signals, i.e. changes in the charge distribution under the influence of the scan direction and applied force of the atomic force microscope (AFM) tip in contact mode. For comparison, (i) we use DPFM on lead halide perovskites and well-known ferroelectric materials (i.e. periodically poled lithium niobate and lead zirconate titanate); and (ii) we conduct parallel experiments on MAPbI3 films of different grain sizes, film thicknesses, substrates, and textures using DPFM as well as piezoelectric force microscopy (PFM) and electrostatic force microscopy (EFM). In contrast to previous work that claimed there were ferroelectric domains in MAPbI3 perovskite films, our work shows that the studied perovskite films Cs0.05(FA0.83MA0.17)0.95Pb(I0.83Br0.17)3 and MAPbI3 are ferroelectricity-free. The observed current profiles of lead halide perovskites possibly originate from ion migration that happens under an applied electrical bias and in strained samples under mechanical stress. This work provides a deeper understanding of the fundamental physical properties of the organic-inorganic lead halide perovskites and solves a longstanding dispute about their non-ferroelectric character: an issue of high relevance for optoelectronic and photovoltaic applications.

11.
J Synchrotron Radiat ; 25(Pt 6): 1642-1649, 2018 Nov 01.
Article in English | MEDLINE | ID: mdl-30407173

ABSTRACT

The choice of a reflective optical coating or filter material has to be adapted to the intended field of application. This is mainly determined by the required photon energy range or by the required reflection angle. Among various materials, nickel and rhodium are common materials used as reflective coatings for (soft) X-ray mirrors. Similarly, aluminium is one of the most commonly used materials for extreme ultraviolet and soft X-ray transmission filters. However, both of these types of optics are subject to carbon contamination, which can be increasingly problematic for the operation of the high-performance free-electron laser and synchrotron beamlines. As an attempt to remove this type of contamination, an inductively coupled plasma source has been used in conjunction with N2/O2/H2 and N2/H2 feedstock gas plasmas. Results from the chemical surface analysis of the above materials before and after plasma treatment using X-ray photoelectron spectroscopy are reported. It is concluded that a favorable combination of an N2/H2 plasma feedstock gas mixture leads to the best chemical surface preservation of Ni, Rh and Al while removing the carbon contamination. However, this feedstock gas mixture does not remove C contamination as rapidly as, for example, an N2/O2/H2 plasma which induces the surface formation of NiO and NiOOH in Ni and RhOOH in Rh foils. As an applied case, the successful carbon removal from ultrathin Al filters previously used at the FERMI FEL1 using an N2/H2 plasma is demonstrated.

12.
Nat Photonics ; 12(6): 343-348, 2018 Jun.
Article in English | MEDLINE | ID: mdl-29881447

ABSTRACT

As contamination and environmental degradation increase nowadays, there is a huge demand for new eco-friendly materials. Despite its use for thousands of years, cellulose and its derivatives have gained renewed interest as favourable alternatives to conventional plastics, due to their abundance and lower environmental impact. We report the fabrication of photonic and plasmonic structures by moulding hydroxypropyl cellulose into sub-micrometric periodic lattices, using soft lithography. This is an alternative way to achieve structural colour in this material which is usually obtained exploiting its chiral nematic phase. Cellulose based photonic crystals are biocompatible and can be dissolved in water or not depending on the derivative employed. Patterned cellulose membranes exhibit tuneable colours and may be used to boost the photoluminescence of a host organic dye. Furthermore, we show how metal coating these cellulose photonic architectures leads to plasmonic crystals with excellent optical properties acting as disposable surface enhanced Raman spectroscopy substrates.

13.
J Phys Condens Matter ; 29(43): 435702, 2017 Nov 01.
Article in English | MEDLINE | ID: mdl-28799526

ABSTRACT

We report on the combined effect of temperature (6 K-300 K) and high pressure (up to 6 GPa) on the resonant Raman scattering by A1g phonons in bulk 2H-MoS2, as the energy of the A exciton is tuned into resonance with an exciting laser at EL = 1.96 eV. As expected, the pressure to be applied for attaining resonant conditions decreases with decreasing temperature. A striking result concerns the combined effect of temperature and pressure on the strength of the incoming relative to the outgoing resonance of the A1g phonon. When its Raman intensity is normalized by that of the 'non-resonant' [Formula: see text] phonon (IA1g/I[Formula: see text]), we find that the contribution of the pressure-tuned outgoing resonance relative to that of the incoming channel changes with temperature. At room temperature both contributions are about equal, as expected. Interestingly, with decreasing temperature an asymmetry in the relative magnitude of the resonances develops, becoming the outgoing contribution about half of the incoming resonance below ~50 K. We discuss the different possibilities for the origin of this effect.

14.
Phys Chem Chem Phys ; 18(39): 27051-27066, 2016 Oct 21.
Article in English | MEDLINE | ID: mdl-27346792

ABSTRACT

We present Raman and terahertz absorbance spectra of methylammonium lead halide single crystals (MAPbX3, X = I, Br, Cl) at temperatures between 80 and 370 K. These results show good agreement with density-functional-theory phonon calculations. Comparison of experimental spectra and calculated vibrational modes enables confident assignment of most of the vibrational features between 50 and 3500 cm-1. Reorientation of the methylammonium cations, unlocked in their cavities at the orthorhombic-to-tetragonal phase transition, plays a key role in shaping the vibrational spectra of the different compounds. Calculations show that these dynamic effects split Raman peaks and create more structure than predicted from the independent harmonic modes. This explains the presence of extra peaks in the experimental spectra that have been a source of confusion in earlier studies. We discuss singular features, in particular the torsional vibration of the C-N axis, which is the only molecular mode that is strongly influenced by the size of the lattice. From analysis of the spectral linewidths, we find that MAPbI3 shows exceptionally short phonon lifetimes, which can be linked to low lattice thermal conductivity. We show that optical rather than acoustic phonon scattering is likely to prevail at room temperature in these materials.

15.
Nat Mater ; 15(7): 746-53, 2016 07.
Article in English | MEDLINE | ID: mdl-27183327

ABSTRACT

The specific optical absorption of an organic semiconductor is critical to the performance of organic optoelectronic devices. For example, higher light-harvesting efficiency can lead to higher photocurrent in solar cells that are limited by sub-optimal electrical transport. Here, we compare over 40 conjugated polymers, and find that many different chemical structures share an apparent maximum in their extinction coefficients. However, a diketopyrrolopyrrole-thienothiophene copolymer shows remarkably high optical absorption at relatively low photon energies. By investigating its backbone structure and conformation with measurements and quantum chemical calculations, we find that the high optical absorption can be explained by the high persistence length of the polymer. Accordingly, we demonstrate high absorption in other polymers with high theoretical persistence length. Visible light harvesting may be enhanced in other conjugated polymers through judicious design of the structure.

16.
Adv Mater ; 28(14): 2782-9, 2016 Apr 13.
Article in English | MEDLINE | ID: mdl-26853701

ABSTRACT

UV-induced switching from p- to n-type character is demonstrated during deposition of carbon-nanotube-conjugated polymer composites. This opens the possibility to photopattern n-type regions within an otherwise p-type film, which has a potential for complementary circuitry or, as shown here, thermoelectric generators made from a single solution.

17.
Carbohydr Polym ; 126: 40-6, 2015 Aug 01.
Article in English | MEDLINE | ID: mdl-25933520

ABSTRACT

Nanofibrillated cellulose, a polymer that can be obtained from one of the most abundant biopolymers in nature, is being increasingly explored due to its outstanding properties for packaging and device applications. Still, open challenges in engineering its intrinsic properties remain to address. To elucidate the optical and mechanical stability of nanofibrillated cellulose as a standalone platform, herein we report on three main findings: (i) for the first time an experimental determination of the optical bandgap of nanofibrillated cellulose, important for future modeling purposes, based on the onset of the optical bandgap of the nanofibrillated cellulose film at Eg≈275 nm (4.5 eV), obtained using absorption and cathodoluminescence measurements. In addition, comparing this result with ab-initio calculations of the electronic structure the exciton binding energy is estimated to be Eex≈800 meV; (ii) hydrostatic pressure experiments revealed that nanofibrillated cellulose is structurally stable at least up to 1.2 GPa; and (iii) surface elastic properties with repeatability better than 5% were observed under moisture cycles with changes of the Young modulus as large as 65%. The results obtained show the precise determination of significant properties as elastic properties and interactions that are compared with similar works and, moreover, demonstrate that nanofibrillated cellulose properties can be reversibly controlled, supporting the extended potential of nanofibrillated cellulose as a robust platform for green-technology applications.


Subject(s)
Betula/chemistry , Cellulose/chemistry , Cellulose/ultrastructure , Nanofibers/chemistry , Nanofibers/ultrastructure , Elastic Modulus , Green Chemistry Technology/methods , Luminescence , Materials Testing , Pressure , Surface Properties
18.
Chem Commun (Camb) ; 51(11): 2166-9, 2015 Feb 07.
Article in English | MEDLINE | ID: mdl-25558481

ABSTRACT

The new compounds LaSrSiO3N and LaBaSiO3N activated with Eu(2+) are orange-red light-emitting luminescent materials under excitation in the UV-blue range. They represent the first examples of stoichiometric alkaline earth oxynitridosilicates with a ß-K2SO4 structure. The isostructural compound LaEuSiO3N is ferromagnetic with a Curie temperature of 3 K and also shows red luminescence (λmax = 705 nm) under excitation at 405 nm.

19.
Soft Matter ; 10(18): 3335-46, 2014 May 14.
Article in English | MEDLINE | ID: mdl-24637713

ABSTRACT

We study the structure of poly(3-hexylthiophene) (P3HT) subjected to nanoscale confinement in two dimensions (2D) as imposed by the rigid walls of nanopore anodic aluminum oxide (AAO) templates. P3HT nanowires with aspect ratios (length-to-diameter) above 1000 and diameters ranging between 15 nm and 350 nm are produced in the pores of the AAO templates via two processing routes. These are, namely, drying a solution or cooling from the melt. Our study focuses on the effects of nanoconfinement on the semicrystalline nature of the nanowires, the orientation of crystals, and the evolution of the structures that P3HT might develop under confinement, which we investigate by combining imaging (SEM), spectroscopic (FTIR, photoluminescence) and structural characterization (WAXS, DSC) techniques. Solution-processed P3HT nanowires are essentially amorphous and porous, whereas melt-processed nanowires are semicrystalline, and present a more compact morphology and smoother surfaces. In the latter case, the orientation of crystals was found to strongly depend on the pore diameter. In large diameter nanowires (250 nm and 120 nm), crystals are oriented laying the π-π stacking direction parallel to the nanowire axis. In contrast, in small diameter nanowires, the π-π stacking direction is mainly perpendicular to the nanowires, as crystals are likely to nucleate at pore walls. The structural evolution of P3HT upon heating into weakly (250 nm in diameter) and strongly (15 nm in diameter) confining pores has been studied. A complex set of structures is observed, i.e., crystals, a solid layered mesophase, a nematic/smectic mesophase, and the isotropic melt. Interestingly, a rare crystal polymorph (form II) is also observed under strong confinement conditions together with the usual lamellar crystal form I. Furthermore, we show that nanoconfinement stabilizes form II: such crystals are still present at 210 °C while in the bulk they get converted to form I crystals at around 50 °C.

20.
J Nanosci Nanotechnol ; 13(7): 5148-53, 2013 Jul.
Article in English | MEDLINE | ID: mdl-23901544

ABSTRACT

We have developed organic photodetectors based on two complementary wedge layers made of CuPc and C60 and observed a strong spatial dependence of the spectral response on the position of the incident light spot. Photocurrent measurements are correlated with atomic force microscopy (AFM), micro-Raman and ellipsometry maps in order to provide insights into the local donor/acceptor concentration, layer thickness and nature of the donor-acceptor interface along the direction of the thickness gradient. Deviations in spatial dependence between experimental photocurrent values and those predicted with a model assuming a sharp and well defined organic-organic interface are discussed in terms of inter-diffusion layers.


Subject(s)
Nanoparticles/chemistry , Organic Chemicals/chemistry , Photometry/instrumentation , Electron Transport , Equipment Design , Equipment Failure Analysis , Nanoparticles/radiation effects , Organic Chemicals/radiation effects
SELECTION OF CITATIONS
SEARCH DETAIL
...