Amine functionalized egg albumin hydrogel with enhanced adsorption potential for diclofenac sodium in water.

The removal of diclofenac sodium (DFS) from wastewater has attracted increasing attention because it is within the extensively prescribed nonsteroidal anti-inflammatory drugs and pose ecotoxicity. Therefore, fabrication of versatile adsorbents of low-cost, higher-effectiveness and excellent recyclability is significant for the treatment of DFS contaminated wastewater. This work reports a promising biobased egg albumin (ALB) hydrogel functionalized with a large density of adsorptive amine sites via polyethyleneimine (PEI). The composite ALB/PEI hydrogel demonstrated an excellent DFS removal capacity, i.e. 232.5 mg/g, in an optimum experimental condition (pH∼6; contact time∼180 min; adsorbent dosage∼0.5 g/L) which revealed to be considerably higher or competitive than many reported adsorbents. The adsorption isotherms better accorded with the Langmuir model and the kinetics with the pseudo second-order model, indicating the mono-layer chemisorption process. Besides, the regeneration steps up to four sequential adsorption/desorption cycles demonstrated an excellent reusability. The Fourier-transform infrared spectrometry (FTIR), and X-ray photoelectron spectroscopy (XPS) results implied that the adsorption process followed via the electrostatic interactions, hydrogen bonding, and π-π stacking between the functionality of hydrogel and aromatic rings of DFS. Considering the low-cost, and an excellent DFS removal capacity, the natural composite ALB/PEI hydrogel could be a promising adsorbent for the treatment of DFS contaminated wastewater.

Amine functionalized sodium alginate hydrogel for efficient and rapid removal of methyl blue in water.

Herein, a potential hydrogel based on sodium alginate (SA) integrated with polyethyleneimine (PEI) was fabricated and employed for the elimination of methyl blue (MB) in aqueous media. The SA/PEI hydrogel demonstrated excellent removal performance for MB, i.e. ~99% of MB could be removed from water within ~30 min using 0.5 g/L SA/PEI hydrogel at 100 mg/L initial concentration. The SA/PEI hydrogel presented maximum adsorption capacity for MB as-high as 400.0 mg/g with the adsorption isotherm and kinetics abide with the Langmuir isotherm model and pseudo second-order kinetics, respectively. The adsorption process followed through chelation between the functionality of the hydrogel and MB as-confirmed by the X-ray photoelectron spectroscopy (XPS) analysis. After four consecutive adsorption/desorption cycles, the adsorption capacity of the SA/PEI hydrogel remained up to ~60% of its adsorption capacity in first cycle. Thus, being a cost-effective and eco-friendly material, the SA/PEI hydrogel can be a potential adsorbent in the decontamination of MB in wastewater.

Depolymerization of waste poly(methyl methacrylate) scraps and purification of depolymerized products.

A big challenge for the civilization in energy saving/waste management can be "the regeneration of monomers from the waste plastics followed by their re-polymerization" using an ideal recycling method. Herein, we investigate the thermal depolymerization of poly(methyl methacrylate) (PMMA) using thermogravimetric analysis coupled with mass spectrometry (TGA-MS). In this process, the polymer chains were decomposed to methyl methacrylate (MMA) in high yield and the degradation species were thoroughly characterized. The obtained MMA contained traces of byproducts. Firstly, the byproducts were found to be nonpolymerizable, secondly, their presence interrupt the polymerization reaction, and thirdly, they reduce the quality of re-polymerized PMMA (r-PMMA). This study reclaims that besides the main byproduct (methyl isobutyrate), traces of methyl pyruvate and 2,3-butanedione were also formed during the thermal depolymerization of PMMA. The formed 2,3-butanedione was found to be responsible for the unpleasant smell in the recovered MMA that also found itself in the r-PMMA. Further, the generated byproducts were eliminated from the r-PMMA by a dissolution/re-precipitation method. The structural characterizations of the recycled and purified PMMA were carried out by Fourier-transform-infrared spectroscopy (FT-IR), Hydrogen-1 (1H)- and Carbon-13 (13C)-nuclear magnetic resonance (NMR), differential scanning calorimetry (DSC) and gel permeation chromatography (GPC). The chemical properties of the r-PMMA and purified PMMA proved to be similar to that of the virgin commercial PMMA. This study can provide an effective and practical prototype for the recycling of waste PMMA scraps and thus reduction in pollution caused by the landfilling of waste PMMA scraps.

Carboxymethyl cellulose/polyacrylamide composite hydrogel for cascaded treatment/reuse of heavy metal ions in wastewater.

A new bio-based bilateral hydrogel containing carboxymethyl cellulose (CMC) and polyacrylamide (PAM) was prepared for the wastewater remediation. The obtained CMC/PAM composite hydrogel reveals a strong single-ion affinity for copper (CuII), lead (PbII) and cadmium (CdII) ions, as well as multi-ion absorbability with its equilibrium data following the Langmuir adsorption model and its adsorption process abiding by a pseudo-second-order kinetics. To demonstrate its recycled use for the metal ions, the adsorbed CuII ions in the hydrogel were reduced in situ to form homogeneously dispersed Cu nanoparticles (NPs), leading to the Cu NPs-loaded CMC/PAM hydrogel. Reduction of 4-nitrophenol to 4-aminophenol with high efficiency was successfully achieved by this Cu NPs-loaded CMC/PAM hydrogel, verifying the hydrogel's dual functionalities towards the wastewater treatment and catalytic application.

Novel alginate/polyethyleneimine hydrogel adsorbent for cascaded removal and utilization of Cu2+ and Pb2+ ions.

Heavy metal ion pollution leads to severe health risk to human beings. Herein, a natural and highly efficient sodium alginate (ALG)/polyethyleneimine (PEI) composite hydrogel was designed and fabricated for the removal of heavy metal ions from wastewater. The adsorption of heavy metal ions on the ALG based, 3D composite hydrogel were thoroughly investigated in this study. Furthermore, the in situ reduced metal nanoparticle-loaded ALG/PEI composite hydrogel provided us a sustainable utilization route of the heavy metal ion with a promising adsorption-catalysis ability. In general, this research will present an effective and practical paradigm for the cascaded treatment and recycling of heavy metal ions in wastewater.

Cellulose contents of some abundant Indian seaweed species.

Crude cellulose as well as alpha- and beta-celluloses were estimated in thirty-four seaweed species of fifteen orders of Chlorophyta, Phaeophyta and Rhodophyta of Indian waters. The greatest yields of crude cellulose and a-cellulose were obtained from Chaetomorpha aerea (approx. 20.0% and 18.5%, respectively), and of beta-cellulose (approx. 3.1%) from Caulerpa imbricata. The lowest crude cellulose, and alpha-and beta-contents were recorded for the calcareous red alga Liagora indica (approx. 0.90%, 0.70% and 0.10%, respectively). There was little variation in cellulose content among the brown algae, while wide variations in the yields were found in the green and red algae. The present work contributes to the repertoire of 67 Indian seaweed species studied to now for their cellulose contents in our laboratory. The combined studies highlight that Chaetomorpha aerea, Acrosiphonia orientalis, Caulerpa taxifolia, Sargassum tenerrimum, Hydroclathrus clathratus and Gelidiella acerosa possess relatively high (> 10%) cellulose contents, which could be of potential utility.