Parallel oxygenators in the same circuit for refractory hypoxemia on veno-venous extracorporeal membrane oxygenation. A 3-patient series.

Extracorporeal membrane oxygenator (ECMO) is a well-established therapy for respiratory failure. Refractory hypoxemia, despite the use of ECMO, remains a challenging problem. The ECMO circuit may not provide enough oxygenation support in the presence of high cardiac output, increased physiologic demand, and impaired gas exchange. Adding a second ECMO oxygenator using the same pump (sometimes needing a second drainage cannula) can improve oxygenation and facilitate lung-protective ventilation in selected patients. We describe a 3-patient series with severe ARDS secondary to SARS-CoV-2 infection and refractory hypoxemia during ECMO support successfully treated with this approach.

Biocatalysts Based on Immobilized Lipases for the Production of Fatty Acid Ethyl Esters: Enhancement of Activity through Ionic Additives and Ion Exchange Supports.

Ionic additives affect the structure, activity and stability of lipases, which allow for solving common application challenges, such as preventing the formation of protein aggregates or strengthening enzyme-support binding, preventing their desorption in organic media. This work aimed to design a biocatalyst, based on lipase improved by the addition of ionic additives, applicable in the production of ethyl esters of fatty acids (EE). Industrial enzymes from Thermomyces lanuginosus (TLL), Rhizomucor miehei (RML), Candida antárctica B (CALB) and Lecitase®, immobilized in commercial supports like Lewatit®, Purolite® and Q-Sepharose®, were tested. The best combination was achieved by immobilizing lipase TLL onto Q-Sepharose® as it surpassed, in terms of %EE (70.1%), the commercial biocatalyst Novozyme® 435 (52.7%) and was similar to that of Lipozyme TL IM (71.3%). Hence, the impact of ionic additives like polymers and surfactants on both free and immobilized TLL on Q-Sepharose® was assessed. It was observed that, when immobilized, in the presence of sodium dodecyl sulfate (SDS), the TLL derivative exhibited a significantly higher activity, with a 93-fold increase (1.02 IU), compared to the free enzyme under identical conditions (0.011 IU). In fatty acids ethyl esters synthesis, Q-SDS-TLL novel derivatives achieved results similar to commercial biocatalysts using up to ~82 times less enzyme (1 mg/g). This creates an opportunity to develop biocatalysts with reduced enzyme consumption, a factor often associated with higher production costs. Such advancements would ease their integration into the biodiesel industry, fostering a greener production approach compared to conventional methods.

Microbial Lipases and Their Potential in the Production of Pharmaceutical Building Blocks.

Processes involving lipases in obtaining active pharmaceutical ingredients (APIs) are crucial to increase the sustainability of the industry. Despite their lower production cost, microbial lipases are striking for their versatile catalyzing reactions beyond their physiological role. In the context of taking advantage of microbial lipases in reactions for the synthesis of API building blocks, this review focuses on: (i) the structural origins of the catalytic properties of microbial lipases, including the results of techniques such as single particle monitoring (SPT) and the description of its selectivity beyond the Kazlauskas rule as the "Mirror-Image Packing" or the "Key Region(s) rule influencing enantioselectivity" (KRIE); (ii) immobilization methods given the conferred operative advantages in industrial applications and their modulating capacity of lipase properties; and (iii) a comprehensive description of microbial lipases use as a conventional or promiscuous catalyst in key reactions in the organic synthesis (Knoevenagel condensation, Morita-Baylis-Hillman (MBH) reactions, Markovnikov additions, Baeyer-Villiger oxidation, racemization, among others). Finally, this review will also focus on a research perspective necessary to increase microbial lipases application development towards a greener industry.

Disulfide Engineered Lipase to Enhance the Catalytic Activity: A Structure-Based Approach on BTL2.

Enhancement, control, and tuning of hydrolytic activity and specificity of lipases are major goals for the industry. Thermoalkaliphilic lipases from the I.5 family, with their native advantages such as high thermostability and tolerance to alkaline pHs, are a target for biotechnological applications. Although several strategies have been applied to increase lipases activity, the enhancement through protein engineering without compromising other capabilities is still elusive. Lipases from the I.5 family suffer a unique and delicate double lid restructuration to transition from a closed and inactive state to their open and enzymatically active conformation. In order to increase the activity of the wild type Geobacillus thermocatenulatus lipase 2 (BTL2) we rationally designed, based on its tridimensional structure, a mutant (ccBTL2) capable of forming a disulfide bond to lock the open state. ccBTL2 was generated replacing A191 and F206 to cysteine residues while both wild type C64 and C295 were mutated to serine. A covalently immobilized ccBTL2 showed a 3.5-fold increment in esterase activity with 0.1% Triton X-100 (2336 IU mg-1) and up to 6.0-fold higher with 0.01% CTAB (778 IU mg-1), both in the presence of oxidizing sulfhydryl agents, when compared to BTL2. The remarkable and industrially desired features of BTL2 such as optimal alkaliphilic pH and high thermal stability were not affected. The designed disulfide bond also conferred reversibility to the enhancement, as the increment on activity observed for ccBTL2 was controlled by redox pretreatments. MD simulations suggested that the most stable conformation for ccBTL2 (with the disulfide bond formed) was, as we predicted, similar to the open and active conformation of this lipase.

New Strategy for the Immobilization of Lipases on Glyoxyl-Agarose Supports: Production of Robust Biocatalysts for Natural Oil Transformation.

Immobilization on Glyoxyl-agarose support (Gx) is one of the best strategies to stabilize enzymes. However, the strategy is difficult to apply at neutral pH when most enzymes are stable and, even when possible, produces labile derivatives. This work contributes to overcoming this hurdle through a strategy that combines solid-phase amination, presence of key additives, and derivative basification. To this end, aminated industrial lipases from Candida artarctica (CAL), Thermomyces lunuginosus (TLL), and the recombinant Geobacillus thermocatenulatus (BTL2) were immobilized on Gx for the first time at neutral pH using anthranilic acid (AA) or DTT as additives (immobilization yields >70%; recovered activities 37.5-76.7%). The spectroscopic evidence suggests nucleophilic catalysis and/or adsorption as the initial lipase immobilization events. Subsequent basification drastically increases the stability of BTL2-glyoxyl derivatives under harsh conditions (t1/2, from 2.1-54.5 h at 70 °C; from 10.2 h-140 h in 80% dioxane). The novel BTL2-derivatives were active and selective in fish oil hydrolysis (1.0-1.8 µmol of polyunsaturated fatty acids (PUFAs) min-1·g-1) whereas the selected TLL-derivative was as active and stable in biodiesel production (fatty ethyl esters, EE) as the commercial Novozyme®-435 after ten reaction cycles (~70% EE). Therefore, the potential of the proposed strategy in producing suitable biocatalysts for industrial processes was demonstrated.

New biotechnological perspectives of a NADH oxidase variant from Thermus thermophilus HB27 as NAD+-recycling enzyme.

BACKGROUND: The number of biotransformations that use nicotinamide recycling systems is exponentially growing. For this reason one of the current challenges in biocatalysis is to develop and optimize more simple and efficient cofactor recycling systems. One promising approach to regenerate NAD+ pools is the use of NADH-oxidases that reduce oxygen to hydrogen peroxide while oxidizing NADH to NAD+. This class of enzymes may be applied to asymmetric reduction of prochiral substrates in order to obtain enantiopure compounds. RESULTS: The NADH-oxidase (NOX) presented here is a flavoenzyme which needs exogenous FAD or FMN to reach its maximum velocity. Interestingly, this enzyme is 6-fold hyperactivated by incubation at high temperatures (80°C) under limiting concentrations of flavin cofactor, a change that remains stable even at low temperatures (37°C). The hyperactivated form presented a high specific activity (37.5 U/mg) at low temperatures despite isolation from a thermophile source. Immobilization of NOX onto agarose activated with glyoxyl groups yielded the most stable enzyme preparation (6-fold more stable than the hyperactivated soluble enzyme). The immobilized derivative was able to be reactivated under physiological conditions after inactivation by high solvent concentrations. The inactivation/reactivation cycle could be repeated at least three times, recovering full NOX activity in all cases after the reactivation step. This immobilized catalyst is presented as a recycling partner for a thermophile alcohol dehydrogenase in order to perform the kinetic resolution secondary alcohols. CONCLUSION: We have designed, developed and characterized a heterogeneous and robust biocatalyst which has been used as recycling partner in the kinetic resolution of rac-1-phenylethanol. The high stability along with its capability to be reactivated makes this biocatalyst highly re-useable for cofactor recycling in redox biotransformations.

Reactivation of a thermostable lipase by solid phase unfolding/refolding effect of cysteine residues on refolding efficiency.

Lipase from Geobacillus thermocatenulatus (BTL2) was immobilized in two different matrixes. In one derivative, the enzyme was immobilized on agarose activated with cyanogen bromide (CNBr-BTL2) via its most reactive superficial amino group, whereas the other derivative was covalently immobilized on glyoxyl agarose supports (Gx-BTL2). The latter immobilization protocol leads to intense multipoint covalent attachment between the lysine richest region of enzyme and the glyoxyl groups on the support surface. The resulted solid derivatives were unfolded by incubation under high concentrations of guanidine and then resuspended in aqueous media under different experimental conditions. In both CNBr-BTL2 and Gx-BTL2 derivatives, the oxidation of Cys residues during the unfolding/refolding processes led to inefficient folding for the enzyme because only 25-30% of its initial activity was recovered after 3h in refolding conditions. Dithiothreitol (DTT), a very mild reducing agent, prevented Cys oxidation during the unfolding/refolding process, greatly improving activity recovery in the refolded forms. In parallel, other variables such as pH, buffer composition and the presence of polymers and other additives, had different effects on refolding efficiencies and refolding rates for both derivatives. In the case of solid derivatives of BTL2 immobilized on CNBr-agarose, the surface's chemistry was crucial to guarantee an optimal protein refolding. In this way, uncharged protein vicinities resulted in better refolding efficiencies than those charged ones.

Glyoxyl-disulfide agarose: a tailor-made support for site-directed rigidification of proteins.

A new strategy has been developed for site-directed immobilization/rigidification of genetically modified enzymes through multipoint covalent attachment on bifunctional disulfide-glyoxyl supports. Here the mechanism is described as a two-step immobilization/rigidification protocol where the enzyme is directly immobilized by thiol-disulfide exchange between the ß-thiol of the single genetically introduced cysteine and the few disulfide groups presented on the support surface (3 µmol/g). Afterward, the enzyme is uniquely rigidified by multipoint covalent attachment (MCA) between the lysine residues in the vicinity of the introduced cysteine and the many glyoxyl groups (220 µmol/g) on the support surface. Both site-directed immobilization and rigidification have been possible only on these novel bifunctional supports. In fact, this technology has made possible to elucidate the protein regions where rigidification by MCA promoted higher protein stabilizations. Hence, rigidification of vicinity of position 333 from lipase 2 from Geobacillus thermocatenulatus (BTL2) promoted a stabilization factor of 33 regarding the unipunctual site-directed immobilized derivative. In the same context, rigidification of penicillin G acylase from E. coli (PGA) through position ß201 resulted in a stabilization factor of 1069. Remarkably, when PGA was site-directed rigidified through that position, it presented a half-life time of 140 h under 60% (v/v) of dioxane and 4 °C, meaning a derivative eight times more stable than the PGA randomly immobilized on glyoxyl-disulfide agarose. Herein we have opened a new scenario to optimize the stabilization of proteins via multipoint covalent immobilization, which may represent a breakthrough in tailor-made tridimensional rigidification of proteins.

Improvement of enzyme properties with a two-step immobilizaton process on novel heterofunctional supports.

Novel heterofunctional glyoxyl-agarose supports were prepared. These supports contain a high concentration of groups (such as quaternary ammonium groups, carboxyl groups, and metal chelates) that are capable of adsorbing proteins, physically or chemically, at neutral pH as well as a high concentration of glyoxyl groups that are unable to immobilize covalently proteins at neutral pH. By using these supports, a two-step immobilization protocol was developed. In the first step, enzymes were adsorbed at pH 7.0 through adsorption of surface regions, which are complementary to the adsorbing groups on the support, and in the second step, the immobilized derivatives were incubated under alkaline conditions to promote an intramolecular multipoint covalent attachment between the glyoxyl groups on the support and the amino groups on the enzyme surface. These new derivatives were compared with those obtained on a monofunctional glyoxyl support at pH 10, in which the region with the greatest number of lysine residues participates in the first immobilization step. In some cases, multipoint immobilization on heterofunctional supports was much more efficient than what was achieved on the monofunctional support. For example, derivatives of tannase from Lactobacillus plantarum on an amino-glyoxyl heterofunctional support were 20-fold more stable than the best derivative on a monofunctional glyoxyl support. Derivatives of lipase from Geobacillus thermocatenulatus (BTL2) on the amino-glyoxyl supports were two times more active and four times more enantioselective than the corresponding monofunctional glyoxyl support derivative.

Improved reactivation of immobilized-stabilized lipase from Thermomyces lanuginosus by its coating with highly hydrophilic polymers.

Immobilized-stabilized aminated lipase from Thermomyces lanuginosus (TLL-A) is not easily reactivated after inactivation by incubation in the presence of organic solvents or chaotropic reagents. To improve the recovered activity of this biocatalyst, immobilized TLL-A has been submitted to different modifications. The best results were obtained when the enzyme was coated with a very hydrophilic and inert polymer: dextran modified with glycine (Dx-Gly). This modification did not reduce enzymatic activity while it increased the stability of this already very stable preparation, in thermal and organic solvent induced inactivation (by a 4-fold factor). Simple incubation in aqueous medium at pH 7 and 25 degrees C permitted to fully recover the activity of the immobilized and modified TLL-A enzyme inactivated by incubation in organic solvents or saturated guanidine during 3 cycles, while the non-modified enzyme only recover some activity. When the inactivation was caused by exposition at high temperatures, the reactivation was higher using the modified biocatalyst, but was far for complete (40% after 3 inactivation-reactivation cycles). The determination of the TLL-A activity in the presence of detergents (that helps the opening of active site of the lipase) allowed, in this case, to significantly improve the results, now near to 90% of the initial activity was recovered (using the non-modified enzyme the recovered activity was around 60%). This very hydrophilic and inert polymer, coating the enzyme surface, seems to help the correct positioning of the hydrophilic and hydrophobic groups of the enzyme, and that way improve both the stability and possibility of reactivation of the enzyme.

Activation of bacterial thermoalkalophilic lipases is spurred by dramatic structural rearrangements.

The bacterial thermoalkalophilic lipases that hydrolyze saturated fatty acids at 60-75 degrees C and pH 8-10 are grouped as the lipase family I.5. We report here the crystal structure of the lipase from Geobacillus thermocatenulatus, the first structure of a member of the lipase family I.5 showing an open configuration. Unexpectedly, enzyme activation involves large structural rearrangements of around 70 amino acids and the concerted movement of two lids, the alpha6- and alpha7-helices, unmasking the active site. Central in the restructuring process of the lids are both the transfer of bulky hydrophobic residues out of the N-terminal end of the alpha6-helix and the incorporation of short side chain residues to the alpha6 C-terminal end. All these structural changes are stabilized by the Zn(2+)-binding domain, which is characteristic of this family of lipases. Two detergent molecules are placed in the active site, mimicking chains of the triglyceride substrate, demonstrating the position of the oxyanion hole and the three pockets that accommodate the sn-1, sn-2, and sn-3 fatty acids chains. The combination of structural and biochemical studies indicate that the lid opening is not mediated by temperature but triggered by interaction with lipid substrate.

Crystallization and preliminary X-ray diffraction studies of the BTL2 lipase from the extremophilic microorganism Bacillus thermocatenulatus.

Bacillus thermocatenulatus lipase 2 (BTL2) is a thermoalkalophilic lipase that has been reported as an enantioselective biocatalyst for diverse reactions and that heads a group of enzymes that share high resistance towards many inactivation agents (heat, organic solvents, pH etc.). This makes BTL2 an important research target because of its potential industrial applications. BTL2 was cloned and overexpressed in Escherichia coli, purified and concentrated for crystallization using the sitting-drop vapour-diffusion method at 291 K. Crystals grew from a mixture of 13% MPD and 0.2 M ammonium acetate in 0.05 M sodium citrate pH 5.5-5.6. The crystals, which belonged to the orthorhombic space group I222 with unit-cell parameters a = 73.07, b = 129.08, c = 127.49 A, allowed the collection of an X-ray data set to 2.2 A resolution.

Solid-phase chemical amination of a lipase from Bacillus thermocatenulatus to improve its stabilization via covalent immobilization on highly activated glyoxyl-agarose.

In this paper, the stabilization of a lipase from Bacillus thermocatenulatus (BTL2) by a new strategy is described. First, the lipase is selectively adsorbed on hydrophobic supports. Second, the carboxylic residues of the enzyme are modified with ethylenediamine, generating a new enzyme having 4-fold more amino groups than the native enzyme. The chemical amination did not present a significant effect on the enzyme activity and only reduced the enzyme half-life by a 3-4-fold factor in inactivations promoted by heat or organic solvents. Next, the aminated and purified enzyme is desorbed from the support using 0.2% Triton X-100. Then, the aminated enzyme was immobilized on glyoxyl-agarose by multipoint covalent attachment. The immobilized enzyme retained 65% of the starting activity. Because of the lower p K of the new amino groups in the enzyme surface, the immobilization could be performed at pH 9 (while the native enzyme was only immobilized at pH over 10). In fact, the immobilization rate was higher at this pH value for the aminated enzyme than that of the native enzyme at pH 10. The optimal stabilization protocol was the immobilization of aminated BTL2 at pH 9 and the further incubation for 24 h at 25 degrees C and pH 10. This preparation was 5-fold more stable than the optimal BTL2 immobilized on glyoxyl agarose and around 1200-fold more stable than the enzyme immobilized on CNBr and further aminated. The catalytic properties of BTL2 could be greatly modulated by the immobilization protocol. For example, from (R/S)-2- O-butyryl-2-phenylacetic acid, one preparation of BTL2 could be used to produce the S-isomer, while other preparation produced the R-isomer.

Characterizing plasma membrane H+-ATPase in two varieties of coffee leaf (Coffea arabica L.) and its interaction with an elicitor fraction from the orange rust fungus (H. vastatrix Berk and Br.) race II.

Early intercellular signaling in Coffea arabica L.-Hemileia vastatrix host-pathogen interaction was studied, using inside-out plasma membrane from two varieties of coffee leaf and a fungal fraction to determine the plant's biochemical responses. Microsomal pellets (100,000 x g) from the susceptible (Caturra) and resistant (Colombia) coffee leaf varieties were purified by partitioning in two-polymer DEX (6.3% w/w) and PEG (6.3% w/w) system aqueous phase. Fungal material was obtained from orange rust Hemileia vastatrix Berk and Br. race II urediospore germ tubes. Plasma membrane vesicles were preferentially localized to PEG phase, as indicated by its enzyme marker distribution. Both H(+)-ATPase activities displayed similar kinetic and biochemical characteristics, comparable to those described for P-type ATPases. Several enzymes may play pivotal roles in plants regarding early interaction with fungal elicitors. Studies of fungal fractions' effects on H(+)-ATPase and both varieties' proton pumping activities were thus carried out. Concentration as low as 0.1 Gluc eq. ml(-1) fungal fraction induced specific inhibition of H(+)-ATPase and the resistant variety's proton pumping activities. The present work describes characterizing the H(+)-ATPase plasma membrane from two Coffea arabica L. varieties (Caturra and Colombia) for the first time and the race specific inhibitory effect of a crude fungal fraction on both H(+)-ATPase and the resistant variety's proton pumping activities.