Influence of Manual and Ultrasonic Scaling on Surface Roughness of Four Different Base Materials Used to Elevate Proximal Dentin-Cementum Gingival Margins: An In Vitro Study.

AIM: To evaluate and compare the effects of both manual and ultrasonic scaling on surface roughness of four different base materials, used for elevating dentin/cementum gingival margins of proximal cavities. METHODS AND MATERIALS: Eighty human upper molars with compound Class II mesial cavities, with gingival margins 1 mm below the cemento-enamel junction (CEJ), were divided into four different groups according to the type of the base material used; resin-modified glass ionomer (RMGI), glass hybrid (HV-GIC), flowable bulk-fill resin composite (Bulk Flow) and bioactive ionic resin (Activa). This was followed by completing the restorations with the same resin composite. All materials were used according to the manufacturers' instructions. All groups were further subdivided into two subgroups according to the scaling technique: manual (hand) or ultrasonic. All restorative and scaling procedures were performed after fixation of specimens with acrylic beside neighboring teeth to simulate natural contact. The mean surface roughness (Ra, µm) of all specimens was measured quantitatively and qualitatively by a three-dimensional (3D) surface analyzer system at two stages; (1) after thermal cycling for 5000 cycles without scaling and (2) after scaling. Data were statistically analyzed using analysis of variance (ANOVA), Tukey post hoc tests, and paired sample t-tests (at α=0.05). RESULTS: For baseline readings, the Bulk Flow group had the lowest Ra values, while HV-GIC group had the highest. RMGI and Activa groups had no statistical significant difference between their Ra values (p>0.05). For post scaling readings, hand scaling had significantly lower Ra values than ultrasonic scaling in all the material groups (p<0.05), except in the Bulk Flow group, where both scaling methods were not significantly different from each other (p>0.05). CONCLUSION: Bulk Flow had the smoothest surfaces when cured against a matrix band compared with the other tested base materials. When hand and ultrasonic scaling methods were compared, the latter technique had more detrimental effect on the surface texture of the four tested base materials.

[Remarks on the "Dignified death and palliative care" bill]. / Comentarios al proyecto de ley "Muerte digna y cuidados paliativos".

The Chilean House of Representatives is discussing the bill on "Dignified death and palliative care", which regulates the so-called medical assistance in dying or euthanasia. This paper will critically analyze the different aspects of the bill, particularly concerning four main dimensions, namely, the patient's condition at the time of requesting euthanasia; the doctor-patient relationship and respect for the autonomy of both parties; the idea of medicine involved in it; and the possible therapeutic alternatives to euthanasia. This critical analysis raises the need to discuss in more depth a project that has to do with such important decisions about our lives and that implies a radical change in the way of thinking and practicing medicine.

Minimally Invasive Multidisciplinary Restorative Approach to the Esthetic Zone Including a Single Discolored Tooth.

OBJECTIVES: The case report describes a minimally invasive, multidisciplinary approach to a single discolored anterior tooth, with internal bleaching using traditional Japanese paper (Washi), a gingivoplasty with a three-dimensional (3D) printed surgical guide, and ultrathin feldspathic porcelain veneers. CLINICAL CONSIDERATION: The patient's primary concern was improving her smile. After clinical evaluation, internal tooth bleaching for the discolored tooth and gingivoplasty with restoration of the maxillary anterior six teeth and first premolars was recommended. The internal tooth whitening was accomplished with sodium perborate mixed with 30% hydrogen peroxide impregnated in Washi and sealed in the root canal with glass ionomer. Once the tooth bleaching was completed, the 3D printed surgical guide was placed in the patient's maxillary anterior region and used to guide soft tissue recontouring. After 6 months, ultrathin feldspathic porcelain veneers were placed. CONCLUSION: Well-planned restorative procedures combining internal tooth bleaching using Washi, gingivoplasty performed with electrosurgery using a 3D printed surgical guide, and ultrathin feldspathic porcelain veneers can achieve the desired results in the esthetic zone and remain successful for 4 years.

Comentarios al proyecto de ley "Muerte digna y cuidados paliativos" / Remarks on the "Dignified death and palliative care" bill

The Chilean House of Representatives is discussing the bill on "Dignified death and palliative care", which regulates the so-called medical assistance in dying or euthanasia. This paper will critically analyze the different aspects of the bill, particularly concerning four main dimensions, namely, the patient's condition at the time of requesting euthanasia; the doctor-patient relationship and respect for the autonomy of both parties; the idea of medicine involved in it; and the possible therapeutic alternatives to euthanasia. This critical analysis raises the need to discuss in more depth a project that has to do with such important decisions about our lives and that implies a radical change in the way of thinking and practicing medicine.

Evaluation of Polishing Systems for CAD/CAM Polymer-Infiltrated Ceramic-Network Restorations.

OBJECTIVE: The purpose of this study was to evaluate the effectiveness of five different polishing systems on a computer-aided design and computer-aided manufacturing (CAD/CAM) polymer-infiltrated ceramic-network restoration with nanoscale assessment using atomic force microscopy (AFM) and visual assessment performed by dental school senior students and faculty members. METHOD: Forty-eight full coverage crowns were milled out of polymer-infiltrated ceramic-network CAD/CAM blocks (Vita Enamic) for polishing with one company proprietary, two ceramic and two composite polishing systems. The prepared crowns were divided into six groups: (1) no polishing (control); (2) polishing with Vita Enamic Polishing Kit (VEna); (3) polishing with Shofu Porcelain Laminate Polishing Kit (SCer); (4) polishing with Brasseler Dialite Feather lite All-Ceramic Adjusting & Polishing System (BCer); (5) polishing with Shofu Composite Polishing Kit (SCom); and (6) polishing with Brasseler Composite Polishing Kit (BCom). The polished crown surface topography was observed, and surface roughness and area were measured with AFM. In addition, polished crowns were visually assessed by 15 senior dental students and 15 dental school faculty members. RESULTS: All polishing treatments significantly reduced the surface roughness and area of the crown compared with the control. SCom and BCom showed significantly higher surface area than VEna, and the SCer and BCer groups were intermediate, showing no significant difference from either VEna or SCom and BCom. There were no significant differences in surface roughness between any of the systems. Dental students and faculty members classified the groups polished with VEna, SCer, and BCer groups as clinically acceptable, and they selected BCer group as the best polished restorations and the control group as the least polished restorations. CONCLUSIONS: Ceramic and composite polishing systems produced similar polishing results as that observed using a company proprietary polishing system. However, effectiveness for polishing using a company proprietary and ceramic polishing system tends to be higher than composite polishing systems.

Effect of Cervical Lesions on Fracture Resistance and Failure Mode of Maxillary Central Incisors Restored with Fiber Posts and Complete Crowns.

PURPOSE: To investigate the effect of a cervical cavity extending 1 mm apical to the cemento-enamel junction (CEJ) on fracture resistance and failure mode of maxillary central incisors that have been treated endodontically, present with complete and incomplete ferrules, and are restored with and without a fiber post. METHODS AND MATERIALS: 50 intact human maxillary central incisors were divided into five groups (n=10): CG (control group) 6-mm fer-rule height, no cervical cavity, and without post; (CO) 6-mm ferrule height without post, with a cervical cavity (access to root canal and cervical cavity restored with composite resin), cervical cavity; and post with ferrule heights of 1 mm (CP1), 2 mm (CP2), and 6 mm (CP6) restored with fiberglass post and composite resin core. After complete metal crowns were cemented on all specimens, they were subjected to thermal cycling (6000 cycles, 5°C/55°C), followed by immediate testing of fracture resistance. After failure, the specimens were sectioned buccolingually to evaluate and identify the mode of failure. The data were analyzed with an analysis of variance (ANOVA) and the Student-Newman-Keuls multiple comparison tests (α =0.05). RESULTS: A 1-mm ferrule height (CP1) fracture resistance was significantly lower (531±125 N) compared to the 6-mm ferrule height (CP6) (769±175 N) (p<0.05). With respect to the groups with similar residual dentin, with and without a cervical cavity, CG (667±119 N) and CO (668±119 N), the presence of a post (CP6) increased the resistance to fracture, although no statistically significant difference was demonstrated. Partial decementation was observed in all specimens of CG and CP6, in nine of CP1 and CP2, and in three in CO. Root fractures occurred in 23 specimens. The root surface was exposed 2 mm below the CEJ to simulate bone level. Propagation of subosseous cracks occurred in four specimens in CG and CP2, in seven specimens in CP6, in two specimens in CP1, and in six specimens in CO. All were considered catastrophic failures. CONCLUSIONS: Within the limitations of this study it is suggested that, when restoring an endodontically treated maxillary central incisor that has a cervical lesion and needs to be restored with a complete crown, a fiber post is cemented to improve fracture resistance.

First report of Dermoglyphus passerinus (Analgoidea: Dermoglyphidae) and Strelkoviacarus sp.(Analgidae: Anomalginae) in canaries (Serinus canaria domestica) in Mexico.

Feather mites are the most numerous group of symbionts permanently associated to birds. They are highly specialized to particular microhabitats on their hosts and most of them may be considered as commensals, but several species are parasites. This manuscript documents for the first time a combined infestation by quill mites Dermoglyphus passerinusGaud, 1974 (Analgoidea: Dermoglyphidae) and feather mites Strelkoviacarus sp.(Analgidae: Anomalginae), in domestic canaries (Serinus canaria domestica) (Linnaeus, 1758) (Passeriformes: Fringillidae) in Mexico City, Mexico. Description of the case, the feather and skin lesions, and findings associated with the infection are presented. This manuscript aims to contribute to the knowledge of mite species that can affect the plumage of Serinus canaria domestica; as well as to the diagnosis and control of these infestations.

Effect of Layering Techniques on Polymerization Shrinkage Stress of High- and Low-viscosity Bulk-fill Resins.

CLINICAL RELEVANCE: The use of layering techniques is still advisable with many bulk-fill resins and should be the default unless a particular resin is known to not need it. SUMMARY: Objective: The purpose of this study was to investigate how layering techniques affect polymerization shrinkage stresses of high-and low-viscosity bulk-fill resins.Method: Six high-viscosity and six low-viscosity bulk-fill resins were evaluated. Aluminum blocks with a mesial-occlusal-distal (MOD) cavity were machined and randomly divided into groups for different filling techniques (bulk-fill vs horizontal layering vs oblique layering) and further subdivided according to type of resin (high- vs low-viscosity). The cuspal deflection resulting from the polymerization of bulk-fill resin bonded to a MOD cavity within an aluminum block was measured with a digimatic micrometer. Scanning electron microscopy analyses of tested resins were also conducted.Results: In the high-viscosity bulk-fill resins, cuspal deflection of the MOD cavity ranged from 11.2 to 18.2 µm with the bulk-filling technique, from 10.7 to 15.5 µm with the horizontal layering technique, and from 10.9 to 15.2 µm with the oblique layering technique. In the low-viscosity bulk-fill resins, cuspal deflection of the material ranged from 9.2 to 19.8 µm with the bulk-filling technique, from 8.2 to 15.7 µm with the horizontal layering technique, and from 8.4 to 16.4 µm with the oblique layering technique.Conclusion: Cuspal deflections for some high-and low-viscosity bulk-fill resins were significantly reduced by using layering techniques, but the resultant improvement of layering techniques was not applicable to all the bulk-fill resins used in this study.

Salivary parameters and oral health status amongst adolescents in Mexico.

BACKGROUND: In the last years an increased interest in the use of salivary parameters in connection with caries experience and caries prediction has been shown. In schoolchildren investigations are known, where the relationship between caries prevalence and salivary parameters has been assessed, but in the adolescent population studies are scarce. The aim of the study was evaluate of the association among salivary parameters, oral health status and caries experience in adolescents in Mexico. METHODS: A cross-sectional study was conducted on 256 (DMFT≥5) and 165 (DMFT< 5) 12-to- 14-year-old adolescents. From all the adolescents, unstimulated mid-morning saliva samples were collected, after which the salivary flow rate was calculated, and the salivary pH and buffer capacity was measured. The caries was evaluated via the application of the DMFT score. Clinical variables such as oral hygiene and dental calculus were examined in the adolescent's oral cavity. The adolescents provided data on their personal characteristics by completing a questionnaire, while socioeconomic data were collected from their parents. Descriptive, bivariate and logistic regression model analyses were performed. RESULTS: The prevalence of caries was 61.1% (DMFT≥5) in permanent dentition, with 72.7% of subjects presenting poor oral hygiene. The mean levels of salivary flow rate, pH, and buffer capacity was significantly lower (p < 0.05) in adolescents with caries score of DMFT≥5 than in those with caries score of DMFT < 5. Salivary flow and buffer capacity were higher in boys than in girls. The logistic regression model applied showed that adolescents with a salivary flow rate < 1 ml per min were more likely to present caries [OR = 1.58 (CI95% 1.04-2.40); p = 0.033] than adolescents with a flow rate ≥ 1 ml per-min, and that, for each unit of increased pH, the probability of presenting caries reduced by 76% [OR = 0.24 (CI95% 0.10-0.55); p = 0.001]. CONCLUSION: Significant association was found in salivary flow rate, pH and buffer capacity in adolescents with caries (DMFT≥5). In addition to differences of these parameters by sex, the results suggest saliva parameters may act as indicators of caries in adolescents.

The effect of two composite placement techniques on fracture resistance of MOD restorations with various resin composites.

OBJECTIVE: The aim of this in vitro study was to compare the effect of two restorative placement techniques, centripetal incremental technique (CIT) and bulk-fill technique (BT) on the fracture resistance of Class II MOD restorations with various resin composites in molar teeth. MATERIALS AND METHODS: Fifty-six extracted, caries free third molars were prepared with MOD preparations and restored with resin composites. The specimens were divided into two groups by placement technique, centripetal incremental technique (CIT) and bulk-fill technique (BT). Each group was subdivided into four groups according to resin composite: hybrid (Aelite LS), nano-hybrid (Virtuoso Universal), bulk fill (Filtek One Bulk Fill) and the micro-hybrid (Herculite XRV) as the control. RESULTS: Two-way analysis of variance test (ANOVA) followed by the multiple comparison procedure, Student-Newman-Keuls Method showed no a statistically significant difference between placement techniques and fracture resistance of Class II resin composite restorations (P > 0.05). Herculite XRV resisted a significantly higher load before fracture than the other three materials at a 0.05 level of significance, while Virtuoso Universal scored the lowest load. CONCLUSIONS: There was no significant effect of the two placement techniques on the fracture resistance of Class II resin composite restorations CLINICAL SIGNIFICANCE: Resin composite restorations in Class II MODs using a simplified bulk fill placement technique showed no significant difference in fracture resistance with the centripetal technique in molar teeth.

Characterization of aortic and brachiocephalic filariasis by Filarioidea sp (Nematoda:Spirurida:Filarioidea) in Mexican ramphastids.

The manuscript presented herein documents the findings of filaria nematodes in 5 keel-billed toucans, and one emerald toucanet, originated from 2 private aviaries in Mexico City during two years. The birds displayed ruffled feathers, depression, inability to perch, convulsions, and sudden death. Furthermore, thickened wall of the aortic and brachiocephalic arteries, with connective tissue proliferation and chondroid metaplasia were observed. Molecular characterization matched Filarioidea sp (Nematoda: Spirurida: Filarioidea). To the authors' knowledge, this is the first documented report of filariae Filarioidea sp. causing mortality in ramphastids in Mexico. This manuscript may contribute to expand current knowledge of filariasis and the health risks and livability of wild birds.

SNPs rs471462296, rs456245081 and rs438495570 in the 5'UTR region of DGAT1 gene in Nelore / SNPs rs471462296, rs456245081 e rs438495570 na região 5'UTR do gene DGAT1 em Nelore

O objetivo desta pesquisa foi avaliar os SNPs rs471462296, rs456245081 e rs438495570 do gene DGAT1 em bovinos Nelore. Foram analisados 109 bovinos. A extração do DNA genômico foi realizada do sangue dos animais, usando-se o kit Ilustra Blood Genomic Prep Mini Spin® (GE Healthcare, UK). A concentração e o grau de pureza do DNA foram determinados por meio de espectrofotômetro (Nanodrop - Thermo Fisher Scientifc, USA). A genotipagem dos SNPs ocorreu mediante o emprego do ensaio Taqman® (Applied Biosystems, USA). Na análise genômica, não foram encontradas alterações nas frequências alélicas e genotípicas (P≥0,05) para os SNPs testados. Dessa forma, a região 5'UTR analisada apresentou-se monomórfica e a variação de SNPs não foi observada, o que limita seu uso como marcadores moleculares para o gene DGAT1 em Nelore.(AU)

Silver-loaded nanoparticles affect ex-vivo mechanical behavior and mineralization of dentin.

BACKGROUND: The aim was to evaluate the effect of silver loaded nanoparticles (NPs) application on the triboscopic, crystallographic and viscoelastic properties of demineralized dentin. Polymethylmetacrylate-based NPs and Ag loaded NPs were applied on demineralized dentin. MATERIAL AND METHODS: Treated and untreated surfaces were probed by a nanoindenter to test viscoelasticity, and by atomic force microscopy to test nanoroughness and collagen fibril diameter. X-ray diffraction and transmission electron microscopy through selected area diffraction and bright-field imaging were also used. RESULTS: Dentin treated with Ag-NPs attained the lowest complex modulus, and the highest tan delta values after 7 days of storage. Dentin treated with undoped-NPs achieved the lowest nanoroughness and the greatest collagen bandwidths among groups. Crystals were identified as hydroxyapatite with the highest crystallographic maturity and crystallite size in dentin treated with undoped-NPs. Texture increased in all samples from 24 h to 7 d, except in dentin surfaces treated with Ag-NPs at 310 plane. Polyhedral, block-like, hexagonal or plate-like shaped apatite crystals constituted the bulk of minerals in dentin treated with Ag-NPs, after 7 d. Polyhedral or rounded/drop-like, and polymorphic in strata crystal apatite characterized the minerals when undoped-NPs were used, with more crystalline characteristics after 7 d than that found when Ag-NPs were applied. Ag-NPs application did not improve the mechanical performance of dentin and did not produce dentin remineralization. However, energy was dissipated through the dentin without showing stress concentration; contrary was occurring at dentin treated with undoped-NPs, that provoked bridge-like mineral deposits at the dentin surface. CONCLUSIONS: Ag-NPs application did not enhance the mechanical properties of cervical dentin, though the energy dissipation did not damage the dentin structure. Remineralization at dentin was not produced after Ag-NPs application, though improved crystallinity may lead to increase stability of the apatite that was generated at the dentin surface.

Outbreak of Systemic Avian Pox in Canaries (Serinus canaria domestica) Associated with the B1 Subgroup of Avian Pox Viruses.

This study reports an outbreak of avian pox in a quarantine of canaries imported from Europe, with a mortality of 30% and clinical signs of dyspnea and blepharoconjunctivitis. During necropsy, beak cyanosis, serous blepharitis, caseous sinusitis, oropharyngitis, tracheitis, pulmonary edema, pneumonia, fibrinous airsacculitis, and splenomegaly were observed. Microscopically, edema, epithelial hyperplasia, hydropic degeneration, and vacuolated eosinophilic intracytoplasmic inclusion bodies were found; similar lesions were observed in the thymus, spleen, and other organs. The virus was isolated in chicken embryos, and it was identified and characterized using a sequence of 913 nucleotides of the DNA polymerase gene. Pathologic characteristics and molecular biology indicate the systemic presence of avian pox associated with an avipoxvirus of the B1 subgroup. Additionally, other lesions associated with Aspergillus sp., Macrorhabdus ornithogaster, and Isospora sp. were found, which could contribute to the high mortality. Canarypox virus should be considered a differential diagnosis in cases of dyspnea and high mortality in canary flocks.

Reporte de caso- Brote de viruela aviar sistémica en canarios (Serinus canaria domestica) asociado con el virus de la viruela aviar subgrupo B1. En este estudio se reporta un brote de viruela aviar en unos canarios importados de Europa que estaban bajo cuarentena, con una mortalidad del 30% y signos clínicos de disnea y blefaroconjuntivitis. Durante la necropsia, se observó cianosis de pico, blefaritis serosa, sinusitis caseosa, orofaringitis, traqueítis, edema pulmonar, neumonía, fibrinosa respiratoria y esplenomegalia. Microscópicamente, se encontró edema, hiperplasia epitelial, degeneración hidrópica y cuerpos de inclusión intracitoplásmicos eosinófilos vacuolados; Se observaron lesiones similares en el timo, el bazo y otros órganos. El virus se aisló en embriones de pollo, se identificó y caracterizó analizando una secuencia de 913 nucleótidos del gene de la polimerasa de ADN. Las características patológicas y la biología molecular indican la presentación sistémica de la viruela aviar asociada a un avipoxvirus del subgrupo B1. Además, se encontraron otras lesiones asociadas con Aspergillus sp., Macrorhabdus ornithogaster y Isopora sp., lo que pudo contribuir a la alta mortalidad. El virus de la viruela del canario debe considerarse un diagnóstico diferencial en casos de disnea y alta mortalidad en parvadas de canarios.

Extremely premature infants: How does death in the delivery room influence mortality rates in two level 3 centers in France?

OBJECTIVES: Mortality rates of very preterm infants may vary considerably between healthcare facilities depending on the neonates' place of inclusion in the cohort study. The objective of this study was to compare the mortality rates of live-born extremely preterm neonates observed in two French tertiary referral hospitals, taking into account the occurrence of neonatal death both in the delivery room and in the neonatal intensive care unit (NICU). METHODS: Retrospective observational study including all pregnancy terminations, stillbirths and live-born infants within a 22- to 26-week 0/6 gestational age range was registered by two French level 3 university centers between 2009 and 2013. The mortality rates were compared between the two centers according to two places of inclusion: either the delivery room or the NICU. RESULTS: A total of 344 infants were born at center A and 160 infants were born at center B. Among the live-born neonates, the rates of neonatal death were similar in center A (54/125, 43.2%) and center B (33/69, 47.8%; P=0.54). However, neonatal death occurred significantly more often in the delivery room at center A (31/54, 57.4%) than at center B (6/33, 18.2%; P<0.001). Finally, the neonatal death rate of live-born very preterm neonates admitted to the NICU was significantly lower in center A (25/94, 26.6%) than in center B (27/63, 42.9%; P=0.03). CONCLUSIONS: This study points out how the inclusion of deaths in the delivery room when comparing neonatal death rates can lead to a substantial bias in benchmarking studies. Center A and center B each endorsed one of the two models of preferential place of neonatal death (delivery room or NICU) detailed in European studies. The reasons behind the two different models and their impact on how parents perceive supporting their neonate need further investigation.

HIV-discordant and concordant HIV-positive male couples' recommendations for how an eHealth HIV prevention toolkit for concordant HIV-negative male couples could be improved to meet their specific needs.

A number of HIV prevention interventions for male couples are in the pipeline for development as few evidence-based ones exist. Among these projects, none include all three groups of male couples (concordant HIV-negative, HIV-discordant, and concordant HIV-positive) as their target population, and only two are eHealth-based. The present qualitative study sought to assess whether one of the eHealth HIV prevention interventions for concordant HIV-negative male couples - called MCAP - could be adapted to meet the relationship and HIV prevention needs of HIV-discordant and HIV-positive male couples. Data for this study are drawn from in-person, individual-level interviews conducted with a convenience sample of 10 HIV-discordant male couples (n = 20) and 8 HIV-positive male couples (n = 16) from the Miami-Fort Lauderdale metro area in 2016. Thematic analysis was conducted to identify patterns (themes) of partners' thoughts about the toolkit, including how they perceived it could be improved for their own relationship and other couple's relationships. Two themes emerged from analysis of the qualitative data suggesting how the participants wanted the toolkit to be improved to meet their needs. Specifically, participants recommended for the toolkit to include guidance about integrating the use of biomedical HIV prevention strategies into couple's relationships, as well as for how partners can best take care of each other and further protect themselves from HIV and/or other STIs (Prevention Guidance). In addition, participants requested for the concept of sexual agreements to be broadened to include other aspects they deemed to be important in their life (e.g., mental health, exercise and nutrition) (Holistic agreements). Findings from the present study illuminate the ways in which MCAP would need to be adapted for these two groups of male couples in order to meet the needs for all three groups of male couples in the U.S. in a future iteration of this intervention.

Prevalencia del síndrome metabólico y su asociación con síntomas del tracto urinario inferior y función sexual / Prevalence of metabolic syndrome and its association with lower urinary tract symptoms and sexual function

Objetivos: Estimar la frecuencia de síndrome metabólico (SMet) en la consulta urológica ambulatoria y su asociación con los síntomas del tracto urinario inferior y la disfunción eréctil. Material y métodos: Estudio retrospectivo que incluyó a todos los hombres de ≥ 40 años que consultaron ambulatoriamente entre 2010 y 2011. Se calculó la prevalencia de SMet, síntomas del tracto urinario inferior y disfunción eréctil. Se utilizó un modelo logístico para comprobar posibles asociaciones, controlando por interacciones y factores de confusión. Resultados: Se incluyeron 616 pacientes. Se encontró SMet en el 43,8% (IC 95%: 39,6-48,3) de los pacientes. El análisis bivariado demostró una asociación entre SMet y síntomas del tracto urinario inferior (p < 0,01), pero no con disfunción eréctil. El modelo logístico demostró una asociación independiente entre SMet y la severidad de los síntomas urinarios por puntuación en el IPSS, siendo mayor el riesgo de SMet en aquellos con síntomas moderados que con síntomas leves (OR: 1,83; IC 95%: 1,14-2,94). Se analizaron por separado los diferentes componentes del SMet y se encontraron asociaciones positivas entre diabetes, síntomas severos (OR: 1,3; IC 95%: 1,24-7,1) y disfunción eréctil (OR: 2,57, IC 95%: 1,12-5,8). Conclusión: Se confirmó la asociación entre SMet y síntomas del tracto urinario inferior, pero no para disfunción eréctil. La diabetes, un componente específico del SMet sí se asoció con ambas condiciones. Las diferencias geográficas previamente reportadas en la literatura podrían explicar estos resultados. Debido a que el SMet es frecuente entre los pacientes urológicos, un tamizado activo por parte de los urólogos es recomendable

Objectives: To estimate the frequency of metabolic syndrome (MetS) in a daily urology practice and to determine its association with lower urinary tract symptoms (LUTS) and erectile dysfunction (ED). Material and methods: A retrospective study was conducted. Data from all male patients aged ≥ 40 years who attended our outpatient urology clinic from 2010 to 2011 was collected. Prevalence of MetS was determined, and LUTS and ED were assessed. A logistic model was used to determine possible associations, controlling for confounders and interaction factors. Results: A total of 616 patients were included. MetS was observed in 43.8% (95% CI 39.6-48.3). The bivariate model showed an association between MetS and LUTS (p < 0.01), but not between MetS and ED. The logistic model showed an association between MetS and the International Prostate Symptom Score (IPSS), while controlling for other variables. Patients exhibiting moderate LUTS had a greater risk for MetS than patients with mild LUTS (OR 1.83, 95% CI 1.14-2.94). After analyzing for individual components of MetS, positive associations were found between diabetes and severe LUTS (OR 1.3, 95% CI 1.24-7.1), and between diabetes and ED (OR 2.57, 95% CI 1.12-5.8). Conclusion: This study was able to confirm an association between MetS and LUTS, but not for ED. Specific components such as diabetes were associated to both. Geographical differences previously reported in the literature might account for these findings. Given that MetS is frequent among urological patients, it is advisable that urologists actively screen for it

Prevalence of metabolic syndrome and its association with lower urinary tract symptoms and sexual function. / Prevalencia del síndrome metabólico y su asociación con síntomas del tracto urinario inferior y función sexual.

OBJECTIVES: To estimate the frequency of metabolic syndrome (MetS) in a daily urology practice and to determine its association with lower urinary tract symptoms (LUTS) and erectile dysfunction (ED). MATERIAL AND METHODS: A retrospective study was conducted. Data from all male patients aged ≥40 years who attended our outpatient urology clinic from 2010 to 2011 was collected. Prevalence of MetS was determined, and LUTS and ED were assessed. A logistic model was used to determine possible associations, controlling for confounders and interaction factors. RESULTS: A total of 616 patients were included. MetS was observed in 43.8% (95% CI 39.6-48.3). The bivariate model showed an association between MetS and LUTS (p<0.01), but not between MetS and ED. The logistic model showed an association between MetS and the International Prostate Symptom Score (IPSS), while controlling for other variables. Patients exhibiting moderate LUTS had a greater risk for MetS than patients with mild LUTS (OR 1.83, 95% CI 1.14-2.94). After analyzing for individual components of MetS, positive associations were found between diabetes and severe LUTS (OR 1.3, 95% CI 1.24-7.1), and between diabetes and ED (OR 2.57, 95% CI 1.12-5.8). CONCLUSION: This study was able to confirm an association between MetS and LUTS, but not for ED. Specific components such as diabetes were associated to both. Geographical differences previously reported in the literature might account for these findings. Given that MetS is frequent among urological patients, it is advisable that urologists actively screen for it.

A review of perchlorate (ClO4-) occurrence in fruits and vegetables.

Since the 1990s, a large number of studies around the world have reported the presence of perchlorate in different types of environmental matrices. In view of their inherent characteristics, such as high solubility, mobility, persistence, and low affinity for the surface of soil, perchlorates are mobilized through the water-soil system and accumulate in edible plant species of high human consumption. However, the ingestion of food products containing perchlorate represents a potential health risk to people due to their adverse effects on thyroid, hormone, and neuronal development, mainly in infants and fetuses. At present, research has been centered on determining sources, fates, and remediation methods and not on its real extension in vegetables under farming conditions. This review presents a comprehensive overview and update of the frequent detection of perchlorate in fruits and vegetables produced and marketed around the world. Additionally, the impact of fertilizer on the potential addition of perchlorate to soil and its mobility in the water-soil-plant system is discussed. This review is organized into the following sections: sources of perchlorate, mobility in the water-soil system, presence in fruits and vegetables in different countries, international regulations, and toxicological studies. Finally, recommendations for future studies concerning perchlorate in fruits and vegetables are presented.

First Identification of Chlamydia psittaci in the Acute Illness and Death of Endemic and Endangered Psittacine Birds in Mexico.

A mortality episode of endemic and endangered psittacine birds from the genera Ara and Amazona occurred during January 2015. The birds were housed in a management unit for wildlife conservation that receives wild-caught birds from illegal trade. In total, 11 (57%) adult birds of different origins that shared these accommodations died. Only four of them were sent for diagnosis. The main lesions found at necropsy were consistent with those described previously for avian chlamydiosis; the presence of Chlamydiaceae was confirmed through immunofluorescence and amplification with further sequencing of the 16S ribosomal RNA gene by using hepatic tissue. Due to the lack of specific diagnostic tools on primary psittacine diseases, the pathogenic effects of systemic, respiratory, or enteric infections with high mortality rates remain unknown in Mexico. In this study, specific molecular identification of avian chlamydiosis was performed using a nested PCR on liver tissues, as well as choanal and cloacal swab samples, confirming the presence of Chlamydia psittaci in all of them. In addition, it was possible to obtain the ompA gene sequence from processed clinical samples, thereby allowing us to determine that the A genotype was affecting these birds. Although this genotype is the most commonly found worldwide in psittacine birds, this case report describes the first avian chlamydiosis outbreak affecting critically endangered and endemic psittacines subjected to reintegration programs in Mexico. Consequently, this study demonstrates the necessity of more exhaustive biosecurity strategies because other pathogens may be present and should be assessed, especially in highly threatened birds, before releasing them into their habitats.