Gravimetric composition of the rejects coming from the segregation process of the municipal recyclable wastes.

Rejects from selective collection are municipal solid waste (MSW) not used for recycling and are, therefore, destined for the landfill in Brazil. Knowledge of the composition and generation of this waste is important for strategically planning public policies that minimize its generation and its negative environmental impacts. However, this portion of MSW is not very well known. Therefore, the aim of this study was to analyze the rejects from the sorting process of the selective waste collection in the municipality of Blumenau, in the State of Santa Catarina, southern Brazil. The studied rejects came from the largest cooperative in the city, and its composition was sorted into 17 categories of 101 samples over the course of one year, with a total of 3893 kg of analyzed rejects. The waste collected by the selective collection of the municipality was evaluated monthly to determine which part of this quantity became rejects and to determine the composition and seasonality of these rejects. The study found that 30.5% of the waste sorted by the cooperative was rejected. Among these rejects, the presence of materials that could be marketed by the cooperative was verified. Hazardous and/or legally prohibited waste were also identified, as were organics, construction and demolition waste, health care waste, electronics, textiles, footwear, batteries, and bulbs. Seasonal analysis indicated a concerning constant generation of health care waste. Aside from that, there was an increase in the generation of waste from electrical and electronic equipment (EEE) during the Christmas period, when a large part of the population discards their EEE. This information is important for the enforcement of the MSW management structure as well as for educational campaigns aimed at the correct separation of waste that should be sent for selective collection.

Plates made with solid waste from the recycled paper industry.

The results of assays carried out on plates used in the construction industry, manufactured entirely with solid wastes of a recycled paper plant, are presented and compared with the results obtained using agglomerated wood and plywood plates. Previous results had shown that wastes are composed essentially of polymers when these wastes are generated by recycled paper produced with the "waved type II" shavings. These solid wastes were placed in a mold that was heated and pressed with a hydraulic press in order to obtain the plates. The waste-produced plates were submitted to tests for humidity, swelling, water absorption, density, modulus of rupture-static bending, modulus of elasticity and direct screw withdrawal. These same assays had been carried out on two types of commercial wood plates, agglomerated wood and plywood, in order to compare the results with those obtained with the waste plate. Waste plates had similar behavior to the agglomerated wood plate, but it was possible to distinguish greater flexibility in the waste-produced plate and a significant difference in the tests for swelling and water absorption which showed the waste plate had a better performance than the agglomerated wood and plywood plates.