Challenges in Oral Drug Delivery and Applications of Lipid Nanoparticles as Potent Oral Drug Carriers for Managing Cardiovascular Risk Factors.

BACKGROUND: The oral application of drugs is the most popular route through which the systemic effect can be achieved. Nevertheless, oral administration is limited by difficulties related to the physicochemical properties of the drug molecule, including low aqueous solubility, instability, low permeability, and rapid metabolism, all of which result in low and irregular oral bioavailability. OBJECTIVE: The enhancement of oral bioavailability of drug molecules with such properties could lead to extreme complications in drug preparations. Oral lipid-based nanoparticles seem to possess extensive advantages due to their ability to increase the solubility, simplifying intestinal absorption and decrease or eradicate the effect of food on the absorption of low soluble, lipophilic drugs and therefore improving the oral bioavailability. METHODS: The present review provides a summary of the general theory of lipid-based nanoparticles, their preparation methods, as well as their oral applications. Moreover, oral drug delivery challenges are discussed. RESULTS: According to this review, the most frequent types of lipid-based nanoparticle, the solid lipid nanoparticles and nanostructured lipid carriers are potent oral carriers due to their ability to penetrate the oral drug adsorption barriers. Moreover, such lipid nanoparticles can be beneficial drug carriers against cardiovascular risk disorders as diabetes, hypertension, etc. Conclusion: In this review, the most current and promising studies involving Solid Lipid Nanoparticles and Nanostructured Lipid Carriers as oral drug carriers are reported aiming to assist researchers who focus their research on lipid-based nanoparticles.

Wound healing effects of collagen-laminin dermal matrix impregnated with resveratrol loaded hyaluronic acid-DPPC microparticles in diabetic rats.

An alternative formulation for the treatment of diabetic foot wounds that heal slowly is a requirement in pharmaceutical field. The aim of this study was to develop a dermal matrix consisting of skin proteins and lipids with an antioxidant that will enhance healing and balance the oxidative stress in the diabetic wound area due to the high levels of glucose. Thus a novel three dimensional collagen-laminin porous dermal matrix was developed by lyophilization. Resveratrol-loaded hyaluronic acid and dipalmitoylphosphatidylcholine microparticles were combined with this dermal matrix. Characterization, in vitro release, microbiological and in vivo studies were performed. Spherical microparticles were obtained with a high RSV encapsulation efficacy. The microparticles were well dispersed in the dermal matrix from the surface to deeper layers. Collagenase degraded dermal matrix, however the addition of RSV loaded microparticles delayed the degradation time. The release of RSV was sustained and reached 70% after 6h. Histological changes and antioxidant parameters in different treatment groups were investigated in full-thickness excision diabetic rat model. Collagen fibers were intense and improved by the presence of formulation without any signs of inflammation. The highest healing score was obtained with the dermal matrix impregnated with RSV-microparticles with an increased antioxidant activity. Collagen-laminin dermal matrix with RSV microparticles was synergistically effective due to presence of skin components in the formulation and controlled release achieved. This combination is a safe and promising option for the treatment of diabetic wounds requiring long recovery.

Evaluation of characteristics and in vitro antioxidant properties of RSV loaded hyaluronic acid-DPPC microparticles as a wound healing system.

Resveratrol (RSV) was incorporated into microparticles by spray drying to treat chronic wounds such as diabetic ulcers. RSV was chosen due to its defense mechanisms as the formation of free radicals delays the healing process. RSV was loaded into microparticles consisting of dipalmitoylphosphatidylcholine (DPPC) and hyaluronic acid (HA), a polysaccharide naturally present within the skin, known to contribute to the healing process. Microparticles were evaluated in terms of production yield, size distribution, encapsulation efficiency, morphology, specific surface area, thermal properties and water content. Spherical and homogenous microparticles (span ≤ 2) in a size range between 20 and 30 µm were obtained with high encapsulation efficiency (≥ 97%). The effect of enzymes (hyaluronidase, phospholipase and lipase) on RSV release showed a dose-dependent pattern followed by a slow release stage. Cytotoxicity/proliferation and oxidative stress parameters (glutathione, oxidized glutathione, glutathione peroxidase, malondialdehyde, superoxide dismutase) obtained from human dermal fibroblast cell cultures revealed that formulations increased cell proliferation and the presence of RSV decreased oxidation in cells. RSV-loaded HA-DPPC microparticles appear as a promising formulation for wound healing due to synergistic effect of the ingredients.

Development and evaluation of coenzyme Q10 loaded solid lipid nanoparticle hydrogel for enhanced dermal delivery.

Coenzyme Q10 (Q10) loaded solid lipid nanoparticles (SLN) were prepared by the high speed homogenization method and incorporated into Carbopol 974P hydrogels. Compritol 888 ATO (C888) was employed as the lipid base; Poloxamer 188 (P188) and Tween 80 (Tw80) were used as surfactant and co-surfactant. Optimum particle size with narrow distribution was obtained as 152.2 nm for blank and 142.4 nm for Q10 loaded SLNs. The overall charge of loaded SLNs was -13.7 ± 1.3 mV. Q10 entrapment efficiency was 89 % and the production yield was 94 %. Transmission electron microscopy analysis provided evidence of colloidal size, spherical shape while differential scanning calorimetry analysis confirmed recrystallization of the lipid after the preparation of SLNs. Trolox equivalent antioxidant capacity (TEAC) analysis has shown that antioxidant potential of Q10 can be protected in SLNs. Rheological characteristics demonstrated that the SLN incorporating gels were shear thinning and the mechanical strength of the gels was suitable for topical application. Diffusion studies from rat abdominal skin revealed that the delivery of Q10 was doubled in SLN incorporating gels, approximately 40 µg cm-2, in comparison with gels prepared with only Q10 (not incorporated in SLNs). As a result, it can be stated that Q10-SLN loaded gels can be successful delivery systems for carrying Q10 efficiently into the skin without losing its antioxidant properties.

A comparative evaluation of coenzyme Q10-loaded liposomes and solid lipid nanoparticles as dermal antioxidant carriers.

BACKGROUND: The effective delivery of coenzyme Q10 (Q10) to the skin has several benefits in therapy for different skin pathologies. However, the delivery of Q10 to deeper layers of skin is challenging due to low aqueous solubility of Q10. Liposomes and solid lipid nanoparticles (SLN) have many advantages to accomplish the requirements in topical drug delivery. This study aims to evaluate the influence of these nanosystems on the effective delivery of Q10 into the skin. METHODS: Q10-loaded liposomes (LIPO-Q10) and SLNs (SLN-Q10) were prepared by thin film hydration and high shear homogenization methods, respectively. Particle size (PS), polydispersity index (PI), zeta potential (ZP), and drug entrapment efficiency were determined. Differential scanning calorimetry analysis and morphological transmission electron microscopy (TEM) examination were conducted. Biocompatibility/cytotoxicity studies of Q10-loaded nanosystems were performed by means of cell culture (human fibroblasts) under oxidative conditions. The protective effect of formulations against production of reactive oxygen species were comparatively evaluated by cytofluorometry studies. RESULTS: PS of uniform SLN-Q10 and LIPO-Q10 were determined as 152.4 ± 7.9 nm and 301.1 ± 8.2 nm, respectively. ZPs were -13.67 ± 1.32 mV and -36.6 ± 0.85 mV in the same order. The drug entrapment efficiency was 15% higher in SLN systems. TEM studies confirmed the colloidal size. SLN-Q10 and LIPO-Q10 showed biocompatibility towards fibroblasts up to 50 µM of Q10, which was determined as suitable for cell proliferation. The mean fluorescence intensity % depending on ROS production determined in cytofluorometric studies could be listed as Q10 ≥ SLN-Q10 > LIPO-Q10. CONCLUSION: The LIPO-Q10 system was able to enhance cell proliferation. On the contrary, SLN-Q10 did not show protective effects against ROS accumulation. As a conclusion, liposomes seem to have advantages over SLN in terms of effective delivery of Q10 to skin for antioxidant purposes.

Resveratrol-loaded solid lipid nanoparticles versus nanostructured lipid carriers: evaluation of antioxidant potential for dermal applications.

BACKGROUND: Excessive generation of radical oxygen species (ROS) is a contributor to skin pathologies. Resveratrol (RSV) is a potent antioxidant. Solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) can ensure close contact and increase the amount of drug absorbed into the skin. In this study, RSV was loaded into SLN and NLC for dermal applications. METHODS: Nanoparticles were prepared by high shear homogenization using Compritol 888ATO, Myglyol, Poloxamer188, and Tween80. Particle size (PS), polydispersity index (PI), zeta potential (ZP), drug entrapment efficiency (EE), and production yield were determined. Differential scanning calorimetry (DSC) analysis and morphological transmission electron microscopy (TEM) examination were conducted. RSV concentration was optimized with cytotoxicity studies, and net intracellular accumulation of ROS was monitored with cytofluorimetry. The amount of RSV was determined from different layers of rat abdominal skin. RESULTS: PS of uniform RSV-SLN and RSV-NLC were determined as 287.2 nm ± 5.1 and 110.5 nm ± 1.3, respectively. ZP was -15.3 mV ± 0.4 and -13.8 mV ± 0.1 in the same order. The drug EE was 18% higher in NLC systems. TEM studies showed that the drug in the shell model was relevant for SLN, and that the melting point of the lipid in NLC was slightly lower. Concentrations below 50 µM were determined as suitable RSV concentrations for both SLN and NLC in cell culture studies. RSV-NLC showed less fluorescence, indicating less ROS production in cytofluorometric studies. Ex vivo skin studies revealed that NLC are more efficient in carrying RSV to the epidermis. CONCLUSION: This study suggests that both of the lipid nanoparticles had antioxidant properties at a concentration of 50 µM. When the two systems were compared, NLC penetrated deeper into the skin. RSV-loaded NLC with smaller PS and higher drug loading appears to be superior to SLN for dermal applications.

Nanoparticulate strategies for effective delivery of poorly soluble therapeutics.

The pharmacological activity of a drug molecule depends on its ability to dissolve and interact with its biological target, either through dissolution and absorption, or through dissolution and receptor interaction. The low bioavailability that characterizes poorly water-soluble drugs is usually attributed to the dissolution kinetic profile. Novel strategies to effectively deliver these drugs include nanoparticulate approaches that either increase the surface area of the drug or improve the solubility characteristics of the drug. Nanosizing approaches are based on the production of drug nanocrytals dispersed in an aqueous surfactant solution, whereas other possibilities include drug loading in nanoparticles. Promising nanoparticulate approaches include the development of lipid-based nanocarriers to increase drug solubility followed by enhanced bioavailability. To select the best approach there are, however, some critical considerations to take into account, for example the physicochemical properties of the drug, the possibility to scale-up the production process, the toxicological considerations of the use of solvents and cosolvents, the selection of an environmentally sustainable methodology and the development of a more patient-friendly dosage form. This article addresses these relevant questions and provides feasible examples of novel strategies with respect to relevant administration routes.

Cyclosporine a-loaded solid lipid nanoparticles: ocular tolerance and in vivo drug release in rabbit eyes.

PURPOSE: To determine the in vivo efficacy of cyclosporine A-loaded solid lipid nanoparticles (SLNs) in rabbit eyes. METHODS: SLNs were prepared and administered to the cul-de-sac of rabbits, and the drug amount in aqueous humor was detected by high performance liquid chromatography (HPLC). The irritation was evaluated by modified Draize testing. RESULTS: The particle size of SLNs was detected as 225.9 +/- 5.5 nm with a negative surface charge. Aqueous humor drug levels reached 50.53 ng/mL, and there was no serious irritation in rabbit eyes. CONCLUSIONS: Topical ophthalmic efficacy of cyclosporine A was enhanced via administration of SLNs.

The effect of geometric shape on the release properties of metronidazole from lipid matrix tablets.

In this study, the lipophilic matrix tablets of metronidazole were prepared with Cutina HR (hydrogenated castor oil), stearic acid, Compritol ATO 888 (glyceryl behenate) and Precirol ATO 5 (glycerol palmitostearate) in two different shapes; cylinder and hexagonal. Our first aim was to investigate the influence of the lipid excipients and geometric shape on the release behavior of metronidazole, and the second aim was to investigate the influence of tablet surface area/volume (SA/V) ratio on drug release from controlled release matrix tablets. In vitro release test was performed using a standard USP dissolution apparatus I. Hardness, surface/volume ratio and friability were determined. The hexagonal tablets were harder than the cylinder tablets. Stearic acid showed the highest release rates for both geometric shapes reflecting the highest surface area and the lowest SA/V ratio. According to power law analysis, the diffusion mechanism was expressed as a Fickian diffusion for all lipid matrix tablets. The square root of time relationship was operative for all tablets. Higuchi kinetic constants obtained with hexagonal tablets were higher than the cylinder tablets. As the type of lipid matrix, the geometric shape of the tablets was also effective on the diffusion and release kinetics. From the present study, it was shown that surface area and volume ratio may be used as parameters for the evaluation of the drug release profile.

Cyclosporine A loaded SLNs: evaluation of cellular uptake and corneal cytotoxicity.

Cyclosporine A (CsA) loaded solid lipid nanoparticles (SLNs) for topical ophthalmic applications were prepared by high shear homogenization and ultrasound method using Compritol 888 ATO, Poloxamer 188 and Tween 80, to investigate the cellular uptake of rabbit corneal epithelial cells (RCE) and to evaluate the cytotoxicity. The size of the optimized formulation was 225.9+/-5.5 nm with a polydispersity index of 0.253+/-0.05. The zeta potential and entrapment efficiency was detected as -16.9+/-0.7 mV and 95.6%, respectively. The CsA release was found to be enzyme (lipase/co-lipase complex) dependent. SLNs were sterilized at 110 and 121 degrees C. The cytotoxicity was evaluated in vitro by means of RCE cells and was higher at 121 degrees C sterilization temperature, probably due to a supposed leakage of Tween 80 following lipid re-crystallization. The permeation and penetration of CsA across/into the corneal cells were evaluated using in vitro and ex vivo experiments. The cellular uptake was investigated by replacing CsA with the fluorescent dye Rhodamine B. The penetration enhancement properties were supported by confocal laser scanning microscopy analysis. The internalization of SLNs in cornea and in RCE cell lines was confirmed, pointing out the possibility of CsA targeting to the cornea.

Release and diffusional modeling of metronidazole lipid matrices.

In this study, the first aim was to investigate the swelling and relaxation properties of lipid matrix on diffusional exponent (n). The second aim was to determine the desired release profile of metronidazole lipid matrix tablets. We prepared metronidazole lipid matrix granules using Carnauba wax, Beeswax, Stearic acid, Cutina HR, Precirol ATO 5, and Compritol ATO 888 by hot fusion method and pressed the tablets of these granules. In vitro release test was performed using a standard USP dissolution apparatus I (basket method) with a stirring rate of 100 rpm at 37 degrees C in 900 ml of 0.1 N hydrochloric acid, adjusted to pH 1.2, as medium for the formulations' screening. Hardness, diameter-height ratio, friability, and swelling ratio were determined. Target release profile of metronidazole was also drawn. Stearic acid showed the highest and Carnauba wax showed the lowest release rates in all formulations used. Swelling ratios were calculated after the dissolution of tablets as 9.24%, 6.03%, 1.74%, and 1.07% for Cutina HR, Beeswax, Precirol ATO 5, and Compritol ATO 888, respectively. There was erosion in Stearic acid, but neither erosion nor swelling in Carnauba wax, was detected. According to the power law analysis, the diffusion mechanism was expressed as pure Fickian for Stearic acid and Carnauba wax and the coupling of Fickian and relaxation contributions for other Cutina HR, Beeswax, Compritol ATO 888, and Precirol ATO 5 tablets. It was found that Beeswax (kd=2.13) has a very close drug release rate with the target profile (kt=1.95). Our results suggested that swelling and relaxation properties of lipid matrices should be examined together for a correct evaluation on drug diffusion mechanism of insoluble matrices.