Electronically steered metasurface antenna.

Mobile devices, climate science, and autonomous vehicles all require advanced microwave antennas for imaging, radar, and wireless communications. We propose a waveguide-fed metasurface antenna architecture that enables electronic beamsteering from a lightweight circuit board with varactor-tuned elements. Our approach uses a unique feed structure and layout that enables spatial sampling at the Nyquist limit of half a wavelength. We detail the design of this Nyquist metasurface antenna and experimentally demonstrate electronic beamsteering in two directions. Nyquist metasurface antennas can realize high performance without costly and power hungry phase shifters, making them a compelling technology for future antenna hardware.

Dynamic Metasurface Aperture as Smart Around-the-Corner Motion Detector.

Detecting and analysing motion is a key feature of Smart Homes and the connected sensor vision they embrace. At present, most motion sensors operate in line-of-sight Doppler shift schemes. Here, we propose an alternative approach suitable for indoor environments, which effectively constitute disordered cavities for radio frequency (RF) waves; we exploit the fundamental sensitivity of modes of such cavities to perturbations, caused here by moving objects. We establish experimentally three key features of our proposed system: (i) ability to capture the temporal variations of motion and discern information such as periodicity ("smart"), (ii) non line-of-sight motion detection, and (iii) single-frequency operation. Moreover, we explain theoretically and demonstrate experimentally that the use of dynamic metasurface apertures can substantially enhance the performance of RF motion detection. Potential applications include accurately detecting human presence and monitoring inhabitants' vital signs.

Computational polarimetric microwave imaging.

We propose a polarimetric microwave imaging technique that exploits recent advances in computational imaging. We utilize a frequency-diverse cavity-backed metasurface, allowing us to demonstrate high-resolution polarimetric imaging using a single transceiver and frequency sweep over the operational microwave bandwidth. The frequency-diverse metasurface imager greatly simplifies the system architecture compared with active arrays and other conventional microwave imaging approaches. We further develop the theoretical framework for computational polarimetric imaging and validate the approach experimentally using a multi-modal leaky cavity. The scalar approximation for the interaction between the radiated waves and the target- often applied in microwave computational imaging schemes-is thus extended to retrieve the susceptibility tensors, and hence provides additional information about the targets. Computational polarimetry has relevance for existing systems in the field that extract polarimetric imagery, and particular for ground observation. A growing number of short-range microwave imaging applications can also notably benefit from computational polarimetry, particularly for imaging objects that are difficult to reconstruct when assuming scalar estimations.

Millimeter-wave spotlight imager using dynamic holographic metasurface antennas.

Computational imaging systems leverage generalized measurements to produce high-fidelity images, enabling novel and often lower cost hardware platforms at the expense of increased processing. However, obtaining full resolution images across a large field-of-view (FOV) can lead to slow reconstruction times, limiting system performance where faster frame rates are desired. In many imaging scenarios, the highest resolution is needed only in smaller subdomains of interest within a scene, suggesting an aperture supporting multiple modalities of image capture with different resolutions can provide a path to system optimization. We explore this concept in the context of millimeter-wave imaging, presenting the design and simulation of a single frequency (75 GHz), multistatic, holographic spotlight aperture integrated into a K-band (17.5-26.5 GHz), frequency-diverse imager. The spotlight aperture - synthesized using an array of dynamically tuned, holographic, metasurface antennas - illuminates a constrained region-of-interest (ROI) identified from a low-resolution image, extracting a high-fidelity image of the constrained-ROI with a minimum number of measurement modes. The designs of both the static, frequency-diverse sub-aperture and the integrated dynamic spotlight aperture are evaluated using simulation techniques developed for large-scale synthetic apertures.

Phaseless computational imaging with a radiating metasurface.

Computational imaging modalities support a simplification of the active architectures required in an imaging system and these approaches have been validated across the electromagnetic spectrum. Recent implementations have utilized pseudo-orthogonal radiation patterns to illuminate an object of interest-notably, frequency-diverse metasurfaces have been exploited as fast and low-cost alternative to conventional coherent imaging systems. However, accurately measuring the complex-valued signals in the frequency domain can be burdensome, particularly for sub-centimeter wavelengths. Here, computational imaging is studied under the relaxed constraint of intensity-only measurements. A novel 3D imaging system is conceived based on 'phaseless' and compressed measurements, with benefits from recent advances in the field of phase retrieval. In this paper, the methodology associated with this novel principle is described, studied, and experimentally demonstrated in the microwave range. A comparison of the estimated images from both complex valued and phaseless measurements are presented, verifying the fidelity of phaseless computational imaging.

Frequency-diverse microwave imaging using planar Mills-Cross cavity apertures.

We demonstrate a frequency diverse, multistatic microwave imaging system based on a set of transmit and receive, radiating, planar cavity apertures. The cavities consist of double-sided, copper-clad circuit boards, with a series of circular radiating irises patterned into the upper conducting plate. The iris arrangement is such that for any given transmitting and receiving aperture pair, a Mills-Cross pattern is formed from the overlapped patterns. The Mills-Cross distribution provides optimum coverage of the imaging scene in the spatial Fourier domain (k-space). The Mills-Cross configuration of the apertures produces measurement modes that are diverse and consistent with the computational imaging approach used for frequency-diverse apertures, yet significantly minimizes the redundancy of information received from the scene. We present a detailed analysis of the Mills-Cross aperture design, with numerical simulations that predict the performance of the apertures as part of an imaging system. Images reconstructed using fabricated apertures are presented, confirming the anticipated performance.

Spatially resolving antenna arrays using frequency diversity.

Radio imaging devices and synthetic aperture radar typically use either mechanical scanning or phased arrays to illuminate a target with spatially varying radiation patterns. Mechanical scanning is unsuitable for many high-speed imaging applications, and phased arrays contain many active components and are technologically and cost prohibitive at millimeter and terahertz frequencies. We show that antennas deliberately designed to produce many different radiation patterns as the frequency is varied can reduce the number of active components necessary while still capturing high-quality images. This approach, called frequency-diversity imaging, can capture an entire two-dimensional image using only a single transmit and receive antenna with broadband illumination. We provide simple principles that ascertain whether a design is likely to achieve particular resolution specifications, and illustrate these principles with simulations.

Comprehensive simulation platform for a metamaterial imaging system.

Recently, a frequency-diverse, metamaterial-based aperture has been introduced in the context of microwave and millimeter wave imaging. The generic form of the aperture is that of a parallel plate waveguide, in which complementary metamaterial elements patterned into the upper plate couple energy from the waveguide mode to the scene. To reliably predict the imaging performance of such an aperture prior to fabrication and experiments, it is necessary to have an accurate forward model that predicts radiation from the aperture, a model for scattering from an arbitrary target in the scene, and a set of image reconstruction approaches that allow scene estimation from an arbitrary set of measurements. Here, we introduce a forward model in which the metamaterial elements are approximated as polarizable magnetic dipoles, excited by the fields propagating within the waveguide. The dipoles used in the model can have arbitrarily assigned polarizability characteristics. Alternatively, fields measured from actual metamaterial samples can be decomposed into a set of effective dipole radiators, allowing the performance of actual samples to be quantitatively modeled and compared with simulated apertures. To confirm the validity of our model, we simulate measurements and scene reconstructions with a virtual multiaperture imaging system operating in the K-band spectrum (18-26.5 GHz) and compare its performance with an experimental system.

Metamaterial microwave holographic imaging system.

We demonstrate a microwave imaging system that combines advances in metamaterial aperture design with emerging computational imaging techniques. The flexibility inherent to guided-wave, complementary metamaterials enables the design of a planar antenna that illuminates a scene with dramatically varying radiation patterns as a function of frequency. As frequency is swept over the K-band (17.5-26.5 GHz), a sequence of pseudorandom radiation patterns interrogates a scene. Measurements of the return signal versus frequency are then acquired and the scene is reconstructed using computational imaging methods. The low-cost, frequency-diverse static aperture allows three-dimensional images to be formed without mechanical scanning or dynamic beam-forming elements. The metamaterial aperture is complementary to a variety of computational imaging schemes, and can be used in conjunction with other sensors to form a multifunctional imaging platform. We illustrate the potential of multisensor fusion by integrating an infrared structured-light and optical image sensor to accelerate the microwave scene reconstruction and to provide a simultaneous visualization of the scene.

Light localization, photon sorting, and enhanced absorption in subwavelength cavity arrays.

A periodically patterned metal-dielectric composite material is designed, fabricated and characterized that spatially splits incoming microwave radiation into two spectral ranges, individually channeling the separate spectral bands to different cavities within each spatially repeating unit cell. Further, the target spectral bands are absorbed within each associated set of cavities. The photon sorting mechanism, the design methodology, and experimental methods used are all described in detail. A spectral splitting efficiency of 93-96% and absorption of 91-92% at the two spectral bands is obtained for the structure. This corresponds to an absorption enhancement over 600% as compared to the absorption in the same thickness of absorbing material. Methods to apply these concepts to other spectral bands are also described.

An efficient broadband metamaterial wave retarder.

Metamaterials with anisotropic electromagnetic properties have the capability to manipulate the polarization states of electromagnetic waves. We describe a method to design a broadband, low-loss wave retarder with graded constitutive parameter distributions based on non-resonant metamaterial elements. A structured metamaterial half-wave retarder that converts one linear polarization to its cross polarization is designed and its performance is characterized experimentally.

Hybrid resonant phenomena in a SRR/YIG metamaterial structure.

We consider the hybridization of the resonance of a SRR metamaterial with the gyromagnetic material resonance of yittrium iron garnet (YIG) inclusions. The combination of an artificial structural resonance and natural material resonance generates a unique hybrid resonance that can be harnessed to make tunable metamaterials and further extend the range of achievable electromagnetic materials. A predictive analytic model is applied that accurately describes the characteristics of this SRR/YIG hybridization. We suggest that this hybridization has been observed in experimental data presented by Kang et al. [Opt. Express, 16, 8825 (2008)] and present numerical simulations to support this assertion. In addition, we investigate a design for optimizing the SRR/YIG structure that shows strong hybridization with a minimum amount of YIG material.